Hello,
I was using Samsung Galaxy S3 SCH-I535 and tried to install a custom recovery named "LOCKWORKMOD" and unfortunately I failed.
Recovery mode was not working and displaying error that found on device is from another source and system can not start. (DAMAGED RECOVERY!)
Secondly, I used EZ-UNLOKER to my boot-loader but things went from worse to worst for me. After choosing , the never turned on after turning it off. I CAME TO KNOW IT IS HARD BRICKED.
Samsung GalaXy S3 SCH-I535 VERIZON.
: 4.4.2 KitKat
No charging.
Not turning on.
When is connected to PC via USB it shows new device detected named, RELINK HS-USB QDLoader 9008 (COM1).
I want to re-flash my with correct files to get it back to life but for doing this I need help.
1. Flash tool and procedure.
2. Required files for flash.
Please help me regarding this issue.
Hi HassanMujtaba000
Thank you for using XDA Assist
We were able to determine that you have already posted your issue here. It would be convenient that you give some time for our experts to analyse and answer you. Therefore, I will be closing this request here.
If you feel that it's taking too much, you may create a new thread at the below forum addressing our experts there.
Verizon Galaxy S III Q&A, Help & Troubleshooting
Thankful for your understanding.
Nice regards and good luck.
THREAD CLOSED
.
HassanMujtaba000 said:
Hello,
I was using Samsung Galaxy S3 SCH-I535 and tried to install a custom recovery named "LOCKWORKMOD" and unfortunately I failed.
Recovery mode was not working and displaying error that found on device is from another source and system can not start. (DAMAGED RECOVERY!)
Secondly, I used EZ-UNLOKER to my boot-loader but things went from worse to worst for me. After choosing , the never turned on after turning it off. I CAME TO KNOW IT IS HARD BRICKED.
Samsung GalaXy S3 SCH-I535 VERIZON.
: 4.4.2 KitKat
No charging.
Not turning on.
When is connected to PC via USB it shows new device detected named, RELINK HS-USB QDLoader 9008 (COM1).
I want to re-flash my with correct files to get it back to life but for doing this I need help.
1. Flash tool and procedure.
2. Required files for flash.
Please help me regarding this issue.
Click to expand...
Click to collapse
Related
Hi folks, I am new to XDA. I bring a difficult one.
Well my problem is that I had the phone rooted, with CM12.1, and after making a wipe data and cache, now I'm not root nor can connect the phone to a PC to use Odin, Odin does not detect me, and It detects it as either mass storage mode. As they do, I'm desperate. I downloaded a stock rom but I can not install from recovery because CYANOGENRECOVERY starts instead of CWM.
If anyone could help me I'll be very grateful.
Regards, Mauro.
Hi, thank you for using XDA Assist. The best place to ask for help is in your device's specific forum here, http://forum.xda-developers.com/galaxy-s4-mini They are the experts on your device. But when you're in download mode and your device connected to your PC do you see anything in device manager, perhaps an icon with a yellow exclamation mark?
Today I removed the linker file from system/bin of my samsung galaxy trendplus GT-S7580 using root explorer app during the installing revear with 3 script on my mobile and I put a another linker in to bin which was downloaded from xda thread link. After putting this my device got laggy and I forced to turn off the device by holding power butten. Then when I turn phone then it open in to only cwm recovery and odin download mode. And phone only show Samsung Galaxy Trend plus GT-S7580 at the time of booting phone and goes in to cwm mode directly. Can't turning on the phone and device nothing show other than device name and cwm mode. Ic
I can not access the device.
Please any solution would be appreciate to regain my phone again in to original. Please please help help help XDA!!!
Hi,
Thanks for using XDA assist.
You should be able to download your phone's stock firmware from a site like sammobile and use ODIN to flash the stock rom files onto your phone (while in download mode). This should restore your phone to stock state.
Alternatively, you can create a XDA account and post in the Android Q&A, Help & Troubleshooting forum.
Good Luck! - gsstudios
Greatful Thanks for suggestion.
Your provided trick worked fine but one question reveal on mind with respect to this operation, can I upgrade a jelly bean 4.2.2 up to kitkat/lolipop version of android like as same process ?
Hey, guys good afternoon. I have a Cubot Note S which I manage quite stupidly, to brick. The phone was rooted with KingRoot and I accidentally press to update to the latest software version from the Update Center of the phone and before it managed to complete, it showed an "ERROR" message. After that, I stuck into a boot loop. I've been searching the internet for a stock firmware of the phone in a .zip file because the Cubot has something like a stock Recovery mode, which I can boot to, to factory reset my phone, to boot into bootloader or apply an update through an sdcard etc. So far I only found a rom on needrom and it is in .rar and has many other irrelevant files in it. It has instructions below how to perform a clean flash of the ROM, but something goes wrong at the process. Either the SP-DMT (Flash Tool) doesn't work properly or my computer doesn't recognize my phone and I can't find the proper drivers for it. Has anyone ever been in this situation before with a chinese phone? Please help out with this because the cell phone belongs to a dear friend of mine and I can't afford to buy a new one these days. Thank you in advance.
Hello and thank you for using XDA Assist,
please create a thread here:
Android Q&A, Help & Troubleshooting
Kind regards
Trafalgar Square
XDA Assist
Hello guys,
A few months ago, I rooted my phone using kingroot. After a few weeks, i tried to install TWRP custom recover to unlock bootloader. I accidently downloaded a wrong version of it and flashed it using flashify app, after which i booted into recovery to check the new recover mode. But, something awkward happened. THE BOOT MODE DIDN'T OPEN AND THE SCREEN GOT STUCK AT "Booting into recovery". I read on the internet and realised that my device has got soft-bricked. Also, phone wasn't rebooting. So, i found a solution atleast start my phone. I took out my battery, pressed the buttons for download mode and then placed the battery back in and pressed the buttons for download mode and somewhow rebooted my phone (i read about this technique in xda forums). Now, although my phone works but i cannot access the recovery mode as it has got soft-bricked. Thus, i cannot perform a hard reset as it gets caught in that "recovery booting stuck cycle". So, can anyone tell me how to fix this? PLS QUICKLY. aLSO, i don't know much about ADB, so pls explain that too as my friend suggested me to use ADB to fix softbrick but im not sure!!
androcrazy24 said:
Hello guys,
A few months ago, I rooted my phone using kingroot. After a few weeks, i tried to install TWRP custom recover to unlock bootloader. I accidently downloaded a wrong version of it and flashed it using flashify app, after which i booted into recovery to check the new recover mode. But, something awkward happened. THE BOOT MODE DIDN'T OPEN AND THE SCREEN GOT STUCK AT "Booting into recovery". I read on the internet and realised that my device has got soft-bricked. Also, phone wasn't rebooting. So, i found a solution atleast start my phone. I took out my battery, pressed the buttons for download mode and then placed the battery back in and pressed the buttons for download mode and somewhow rebooted my phone (i read about this technique in xda forums). Now, although my phone works but i cannot access the recovery mode as it has got soft-bricked. Thus, i cannot perform a hard reset as it gets caught in that "recovery booting stuck cycle". So, can anyone tell me how to fix this? PLS QUICKLY. aLSO, i don't know much about ADB, so pls explain that too as my friend suggested me to use ADB to fix softbrick but im not sure!!
Click to expand...
Click to collapse
Hi androcrazy24
Thanks for using XDA Assist.
Could you please state the Manufacturer & Model of your device so we would better approach your issue guiding you to the appropriate experts? Your last post from November 2015 is referring to the S III. It is still that?
I will be waiting for your reply within the next 2 days.
Nice regards.
.
my phone is samsung galaxy s4 mini DUOS GT-I9192, OBVIOUSLY BY SAMSUNG..........
Kdio said:
Hi androcrazy24
Thanks for using XDA Assist.
Could you please state the Manufacturer & Model of your device so we would better approach your issue guiding you to the appropriate experts? Your last post from November 2015 is referring to the S III. It is still that?
I will be waiting for your reply within the next 2 days.
Nice regards.
.
Click to expand...
Click to collapse
"mY phone is samsung galaxy s4 mini duos GT-19192 RUNNING ANDROID 4.4.2
androcrazy24 said:
"mY phone is samsung galaxy s4 mini duos GT-19192 RUNNING ANDROID 4.4.2
Click to expand...
Click to collapse
Hi androcrazy24
Thank you for your answer
Our experts at the below forum should be able to help you. Please be welcome to ask in there.
Galaxy S 4 Mini Q&A, Help & Troubleshooting
Nice regards and good luck.
.
Hi everyone,
I own a Motorola Moto G2 (XT1068, dual sim) that came used with Android 6.0 on it.
I installed TWRP (twrp-3.0.2-3-titan.img) on it but failed to root Android 6.0 as well as 5.0 for whatever not yet understood reason. I don't do Android development for a living but I'm an IT professional, so handling adb and fastboot as well as reading and understanding instructions isn't a problem.
I flashed stock Android 4.4.4 (RETDEALL_XT1068_4.4.4_KXB21.85-14) which I successfully rooted by installing SuperSU via TWRP.
Next I updated SuperSU, verified that root access is indeed working and installed FlashFire, which I hoped to use to install OS upgrades, possibly without losing root. FlashFire is new to me (as of yesterday), everything else mentioned up to here is not.
I used the "Flash ZIP or OTA" action from within FlashFire and the previously downloaded update file in the /cache directory. I can't reproduce the file name since the phone is currently unusable and I didn't write the file name down prior to using FlashFire.
The state of the phone after this unsuccessful attempt was that of a broken USB device, i.e. unable to even register as whatever type of USB device. I learned that this can be fixed by holding the power button down for more than one minute, after which I managed to
get the phone to be shown as working "RELINK HS-USB QDLoader 9008" USB serial device in Windows 7 device manager.
I used the information in these two threads:
http://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Since I started with Android 4.4.4 trying to upgrade to 5.0, I had hoped that the blank flash package for one of these Android versions would help fix my problem, but as of now, this doesn't seem to be the case. At the end of the blank flashing process, I get the message
FAILED <blank-flash:sdl-transfer-image:sdl-hello: error sending packet>
After that, the phone still has a black screen and cannot boot into anything. Repeating blank flash works after resetting whatever part of it is still working by holding the power button down for about 30+ seconds.
Is there anything obvious (or maybe even not so obvious) that I missed?
Thanks for reading and any help and/or pointers in the right direction.
Hello and thank you for using XDA Assist,
please create an account and post your question in our Android Q&A section:
G 2014 Q&A, HELP & TROUBLESHOOTING
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist