Hi folks, I am new to XDA. I bring a difficult one.
Well my problem is that I had the phone rooted, with CM12.1, and after making a wipe data and cache, now I'm not root nor can connect the phone to a PC to use Odin, Odin does not detect me, and It detects it as either mass storage mode. As they do, I'm desperate. I downloaded a stock rom but I can not install from recovery because CYANOGENRECOVERY starts instead of CWM.
If anyone could help me I'll be very grateful.
Regards, Mauro.
Hi, thank you for using XDA Assist. The best place to ask for help is in your device's specific forum here, http://forum.xda-developers.com/galaxy-s4-mini They are the experts on your device. But when you're in download mode and your device connected to your PC do you see anything in device manager, perhaps an icon with a yellow exclamation mark?
Related
Hi,
I had increased internal memory of my Galay Young by partitionning SD Card and linked applications by Link2Sd.
When I reseted the phone in the settings of android, it boot only in CWM Recovery.
I tried to install a fresh custom rom but Odin is not detecting my phone.
Thank you for your help.
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
For more questions or to have full access please register an account on XDA forum.
Stand by
Good luck
Is there anyone who have an idea of how to resolve this problem ?
make sure that your phone is in download mode and your PC have samsung drivers installed....and also make sure that you are using the latest version of odin
press thanks :good: if i helped
hi.I have one big problem with clockworkmod.l format system and i forget download zip file and haven't system on my phone .My phone doesn't connect in my computer.help me .my phone is nexus 5.
Hi, thank you for using XDA Assist. The best palce to get help on your device is in its specific forum here, http://forum.xda-developers.com/google-nexus-5 Start here, http://forum.xda-developers.com/goo...urce-guides-info-threads-linked-read-t2784527 There is information there on how to get drivers working so your PC recognizes your device and how to use adb to push a zom zip to your device. If that doesn't work then you return your device to stock and start all over.
Hi everyone, I'm facing a problem with my samsung galaxy tab 2 gt-p5100, device is constantly bootlooping, the strange thing is that i can get it to boot for about 30 seconds, but any action that I do doesn't register like if the system is "frozen", i can access CWM, but again nothing works, no wipe data/factory reset or anything else, I can get to download mode but pc doesn't recognize the tablet so i can't use odin. I'm running JB 4.1.2, debugging usb is enabled
Hello,
Welcome to XDA.
If you can still get to recovery then you may be able to use adb while in recovery to get out of the bootloop.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/galaxy-tab-2/help
The experts there may be able to help.
Remember to register an XDA account so you can post and reply in the forums. Good luck.
Hey,i have rooted my core prime SMG361h recently with my pc on odin and using twrp,It works well, Things get worst,WHEN I accidently delete the whole OS system of the android phone, I tried to Flash a CYANOGENMOD ,It failed So i reboot it But now, twrp wont show up till now,it only show the samsung GAlaxy core prime icon and a RECOVERY ISNOT SEANDROID ENFORCING and at that time i connect the usb cable with pc it charges and on the left top corner there a display of KERNEL IS NOT SEANDROID ENFORCING (this thing never shown while CHARGING when the TWRP was working)So i press the Volume down +power+menu for the download mode the download mode shown up but ,the device cannot detect by my Pc,(I install the samsung driver from kies as well)I also Replace the USB cable as well thought the cable might be problem the device still charging but its cannot detecct..I already download a custom frmware from (SAMMOBILE Firmware).directly flashing from Twrp wont work, say MD5 not found,so i tried to flash from PC using Odin ,AS the pc cannot detect the device the odin cannot detct as well....M desperate right now...PLz help...
Hello and thank you for using XDA Assist,
sorry for the delayed answer!
Please create a thread in one of our Questions and Answers sections:
Android Q&A, Help & Troubleshooting
Kind regards and good luck
Trafalgar Square
XDA Assist
Hello,
I was using Samsung Galaxy S3 SCH-I535 and tried to install a custom recovery named "LOCKWORKMOD" and unfortunately I failed.
Recovery mode was not working and displaying error that found on device is from another source and system can not start. (DAMAGED RECOVERY!)
Secondly, I used EZ-UNLOKER to my boot-loader but things went from worse to worst for me. After choosing , the never turned on after turning it off. I CAME TO KNOW IT IS HARD BRICKED.
Samsung GalaXy S3 SCH-I535 VERIZON.
: 4.4.2 KitKat
No charging.
Not turning on.
When is connected to PC via USB it shows new device detected named, RELINK HS-USB QDLoader 9008 (COM1).
I want to re-flash my with correct files to get it back to life but for doing this I need help.
1. Flash tool and procedure.
2. Required files for flash.
Please help me regarding this issue.
Hi HassanMujtaba000
Thank you for using XDA Assist
We were able to determine that you have already posted your issue here. It would be convenient that you give some time for our experts to analyse and answer you. Therefore, I will be closing this request here.
If you feel that it's taking too much, you may create a new thread at the below forum addressing our experts there.
Verizon Galaxy S III Q&A, Help & Troubleshooting
Thankful for your understanding.
Nice regards and good luck.
THREAD CLOSED
.
HassanMujtaba000 said:
Hello,
I was using Samsung Galaxy S3 SCH-I535 and tried to install a custom recovery named "LOCKWORKMOD" and unfortunately I failed.
Recovery mode was not working and displaying error that found on device is from another source and system can not start. (DAMAGED RECOVERY!)
Secondly, I used EZ-UNLOKER to my boot-loader but things went from worse to worst for me. After choosing , the never turned on after turning it off. I CAME TO KNOW IT IS HARD BRICKED.
Samsung GalaXy S3 SCH-I535 VERIZON.
: 4.4.2 KitKat
No charging.
Not turning on.
When is connected to PC via USB it shows new device detected named, RELINK HS-USB QDLoader 9008 (COM1).
I want to re-flash my with correct files to get it back to life but for doing this I need help.
1. Flash tool and procedure.
2. Required files for flash.
Please help me regarding this issue.
Click to expand...
Click to collapse