I have a bricked ( I am not sure) max908 model phone. The phone was bricked because I have tried a rom of Lenovo which was for MT6572 chip as mine. When power button is pressed it only show start logo of Lenovo and nothing happened.
Then I have used spflush tool and custom rom which are available for max908 on internet and it shows some error like BROM ERROR.
And when power button is pressed it shows only the logo of Maximus.I don't know what should I do. Please help me.:crying::crying::crying:
Hello,
Welcome to XDA.
Try posting your question in the link below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Related
Hi,
Sorry 1st of all if my thread is overlapping as i am very confused where to look for help. Ok my problem is my intex phone was in boot loop even after flashing from a shop and i tried to flash stock rom myself but flash tool didnt pick up the connected phone. I did everything in order except backup as i didnt needed any info from the phone.
Intex_Aqua_Power_HD_V06_Indian_SER..//
SP_Flash_Tool_v5.1516
that was the stock rom and flashing tool i downloaded now my desktop Win 10 is displaying that usb device connected is not recognized and
the phone isnt showing any activity on pressing power button, Power button+vol up/down key and nothing on charging.
I will be very grateful if someone can help out.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Help!
I own Intex Aqua 4G+ (Android: 5.0). I was trying to root it last night by first unlocking its bootloader. But I think I flashed a wrong recovery.img file to my phone. After that, it is continuously rebooting. It's battery is non removable so I'm kinda having a hard time switching it off. But I still managed to switch it off somehow. The thing is that I can't enter recovery mode at all. When I boot up device by pressing Power + Vol. up or Vol. down (tried both), it directly takes me to red screen "Hello android", then it flashes like crazy for about 5 seconds there, and then reboot again.
Is this a soft brick, hard brick, what? How can I fix it!
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!
Hello great people, I have one problem with my GoClever Orion 70L tablet.
I forgot screen unlock password, so I tried to flash new firmware which I downloaded from official GoClever website.
I flashed it with PhoenixSuit, and everything goes fine, flashing was successful.
When I tried to power on the tablet, it keep stucking on GoClever boot logo.
I tried to flash it again and again with PhoenixSuit, and it is always successful, but every time it's stucking on the boot logo.
The tablet don't have volume+ and volume- buttons, so I don't know how to go into recovery mode, but maybe I don't need to.
It have just Home and Power button.
I hope somebody here can help me with this problem. Thanks!
kuzmvnovic said:
Hello great people, I have one problem with my GoClever Orion 70L tablet.
I forgot screen unlock password, so I tried to flash new firmware which I downloaded from official GoClever website.
I flashed it with PhoenixSuit, and everything goes fine, flashing was successful.
When I tried to power on the tablet, it keep stucking on GoClever boot logo.
I tried to flash it again and again with PhoenixSuit, and it is always successful, but every time it's stucking on the boot logo.
The tablet don't have volume+ and volume- buttons, so I don't know how to go into recovery mode, but maybe I don't need to.
It have just Home and Power button.
I hope somebody here can help me with this problem. Thanks!
Click to expand...
Click to collapse
Hi and welcome to XDA.
I couldn't find much information about your device here. Try posting your query in Android Q&A,Help and Troubleshooting or in the friendly Q&A thread here->[Ask Any Question][Newbie Friendly]. Experts there may be able to help you.
Good luck
I have a ME U2 tab which won't boot. It was not even rooted. It switched off once but won't boot up now. It gets stuck on ME logo when tried to switch on. Can't boot into recovery. When I use the volume button combination with power button the screen will not turn a bit. I used AML burn tool. And sometimes my device gets detected and sometimes not.
I have a ROM.zip for the tab but aml won't flash it. Is there any way to convert it into .IMG or please provide me any other way. Please help fast
Hello,
I'm not finding anything specific that will help you. Try posting your issue in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
hi all. plz help me about Zte q802cdma. while i upgrading lollipop update,i took an error at the setup and device not start. volume+ with power button : comes device logo to the screen.and dissappear in 3 seconds. volume- with power button: comes device logo to the screen but not load anything and logo appears forever.
volume+ and volume- with power button (if connected to pc) : device manager finds a device called name QHSUSB_BULK and i setup device drivers. it recognized name is Qualcomm HS-USB QDLoader 9008 (com6). i tried a lot of way to unbrick but no result. i read alot of topics, i applied so many unbrick solutions but i have failed. because i cant find appropriate topic about my device. i tried another similar device’s topics. sorry my bad english. can someone help me about this device?
also my friend has same device with running android os. maybe it can be useful to unbrick my device.
sheva728 said:
hi all. plz help me about Zte q802cdma. while i upgrading lollipop update,i took an error at the setup and device not start. volume+ with power button : comes device logo to the screen.and dissappear in 3 seconds. volume- with power button: comes device logo to the screen but not load anything and logo appears forever.
volume+ and volume- with power button (if connected to pc) : device manager finds a device called name QHSUSB_BULK and i setup device drivers. it recognized name is Qualcomm HS-USB QDLoader 9008 (com6). i tried a lot of way to unbrick but no result. i read alot of topics, i applied so many unbrick solutions but i have failed. because i cant find appropriate topic about my device. i tried another similar device’s topics. sorry my bad english. can someone help me about this device?
also my friend has same device with running android os. maybe it can be useful to unbrick my device.
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
Please consider posting your question here:
http://forum.xda-developers.com/showthread.php?t=2259645
That is a friendly help thread where you're sure to find expert advice.
Good luck!