Hi All,
I tried to flash my LYF Flame 1 via QFIL, I don't know why, but for any reason I got an error to complete the flashing.
I think I bricked my phone.
Now my phone is not responding anymore.
No charging, no power-up, nothing......
Only, when I connect the phone with laptop, i got qualcomm hs-usb diagnostics 900e driver.
and QFIL Error : Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode
Please help me to unbrick my phone.
Thanks
Hi there and welcome to assist,
Unfortunately there is nothing about your question/device on XDA forum. Try a Google search first.
Good luck
Related
Hi guys! I have an LG G2 D802 model. I tried flashing a rom through twrp but it failed. I wiped the partitions again and then I gave it the command to reboot into recovery but that was it...the phone didn't start anymore.
If I connect it to the PC sometimes it says that the USB can't be recognized and other times it says this: "Forge HS-USB QDLoader 9008 (COM5)". The COM port changes eveytime I connect it again to the PC.
I tried different methods of making it work..with the LG G2 flashtool, the LGG2_9008_fix, srktools, following this thread: http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but none was a success.
Can maybe someone of you help me?
Thanks a lot!
XDA Visitor said:
Hi guys! I have an LG G2 D802 model. I tried flashing a rom through twrp but it failed. I wiped the partitions again and then I gave it the command to reboot into recovery but that was it...the phone didn't start anymore.
If I connect it to the PC sometimes it says that the USB can't be recognized and other times it says this: "Forge HS-USB QDLoader 9008 (COM5)". The COM port changes eveytime I connect it again to the PC.
I tried different methods of making it work..with the LG G2 flashtool, the LGG2_9008_fix, srktools, following this thread: http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but none was a success.
Can maybe someone of you help me?
Thanks a lot!
Click to expand...
Click to collapse
Fortunately there are many unbrick guides for your device, e.g.:
Unbrick your LG G2 D802 - Back to stock by flash kdz by Ceovip
LG G2-D802 Unbrick Device by g0dsend313 (mlm1102003) by mlm1102003
[GUIDE] Hard Brick Recovery LG G2 by etm34
[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2 by Partager.info
[FIX] Bricked LG G2 D800/1/2/3 FlashTool Fail Fix Download Mode Only by MK45A
If nothing helps, please register on xda and ask in the [HELP THREAD][Noob Friendly] LG G2 Ask any question by XxZombiePikachu.
There are many experienced users having the same device like you ... so best place to get proper help and advices.
Good luck !
Thread closed. Thank you!
LG d958 SuperBrick needs help
OTA softbricked my phone. was pinned to TWRP. then since i am super noob, i destroyed my recovery to get to fastboot. when i get to fastboot still super super noob flashed cwm recovery. now i have "secure boot error". if i connect to computer after this secure boot error i will have "Marshall London HS-USB Diagnostics 9006 (com7)", if i uninstall +removing driver for this i got "Qualcomm HS-USB Diagnostics 9006 (com7)". luckily or not lucky i can go to download mode. when i tried LGFLASHTOOL it gives me "CrossDl [d959] to [d958] swversion" error. when i tried hex editing the "tot" file which is "BIN_LGD958AT-00-V20a-HKG-XX-MAY-14-2014+0.tot" replacing d958 with d959 i got "Failed PreviousLoad" error. i've tried so may times still "Failed PreviousLoad". now I am stuck with finding ways to get back to adb or fastboot but no luck to connect. I am emploring your kindness to please help me resurrect my beloved d958. please.......... one more thing after LG Logo super loop i got LG security error. hahaha i know i'm f### please help me geniuses out there. promise i will not mess with rooting again.
Hi,
Thanks for writing to us at XDA Assist.
You can post your question in your device forum help section to get further help:
G Flex Q&A, Help & Troubleshooting
Good luck!
my lg exceed 2 is bricked by installing twrp.. no power, no recovery, no download mode.. i finally got computer to see phone as qualcomm hs-usb QDLoader 9008 (com4). i also got software QFIL to see phone in Download Mode but cant seem to to get it to repair and ESF Professional Qualcomm NV Tools to see phone in Online Mode but can not repair im not fimilar with these two software's so that might be a reason.. With QFIL i have problem with Programmer Hex saraha but does see phone in Download Mode. With QualComm NV Tools it detects phone in OnLine Mode and Mobile Model ID as "FFA/SURF 7630 (NAND)" and SPC is rejected by phone.. i can change phone modes with Qualcomm NV tools if that can help.. LGFlashTool and BoardDiag 3.99 does not see phone.. can someone please help me its going on a month bricked and phone still has service.. i did root phone with kingroot before installing twrp which bricked my phone. Also phone does disconnect and reconnect to pc every so often..
Hello and thank you for using XDA Assist,
please ask you question in our Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards
Trafalgar Square
XDA Assist
I have a Lenovo A816 and after a first attempt of re-flashing to factory firmware i got an error of unable to connect now my phone is unable to startup when i try to reboot i get a long vibration and that's i PLS HELP
Dev Manager ORT
Marshall London HS-USB Diagnostics 9006
This is an error tha i get it now every time i try o re-flash
//**
Download Fail:System.Exception: Failed to Switch to Emergency Download mode
at QC.QMSLPhone.Phone.QPHONEMS_SwitchToEDL()
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
Download Fail:Switch To EDL FailSystem.Exception: FireHose Fail
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
at QFIL.Tech.DownloadTech.SwitchToEDL()
Finish Download
**//
Is here a way o ake the phone ou of DownloadMode?
mitusseuropa said:
I have a Lenovo A816 and after a first attempt of re-flashing to factory firmware i got an error of unable to connect now my phone is unable to startup when i try to reboot i get a long vibration and that's i PLS HELP
Dev Manager ORT
Marshall London HS-USB Diagnostics 9006
This is an error tha i get it now every time i try o re-flash
//**
Download Fail:System.Exception: Failed to Switch to Emergency Download mode
at QC.QMSLPhone.Phone.QPHONEMS_SwitchToEDL()
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
Download Fail:Switch To EDL FailSystem.Exception: FireHose Fail
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
at QFIL.Tech.DownloadTech.SwitchToEDL()
Finish Download
**//
Is here a way o ake the phone ou of DownloadMode?
Click to expand...
Click to collapse
Hi mitusseuropa
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
hi all. plz help me about Zte q802cdma. while i upgrading lollipop update,i took an error at the setup and device not start. volume+ with power button : comes device logo to the screen.and dissappear in 3 seconds. volume- with power button: comes device logo to the screen but not load anything and logo appears forever.
volume+ and volume- with power button (if connected to pc) : device manager finds a device called name QHSUSB_BULK and i setup device drivers. it recognized name is Qualcomm HS-USB QDLoader 9008 (com6). i tried a lot of way to unbrick but no result. i read alot of topics, i applied so many unbrick solutions but i have failed. because i cant find appropriate topic about my device. i tried another similar device’s topics. sorry my bad english. can someone help me about this device?
also my friend has same device with running android os. maybe it can be useful to unbrick my device.
sheva728 said:
hi all. plz help me about Zte q802cdma. while i upgrading lollipop update,i took an error at the setup and device not start. volume+ with power button : comes device logo to the screen.and dissappear in 3 seconds. volume- with power button: comes device logo to the screen but not load anything and logo appears forever.
volume+ and volume- with power button (if connected to pc) : device manager finds a device called name QHSUSB_BULK and i setup device drivers. it recognized name is Qualcomm HS-USB QDLoader 9008 (com6). i tried a lot of way to unbrick but no result. i read alot of topics, i applied so many unbrick solutions but i have failed. because i cant find appropriate topic about my device. i tried another similar device’s topics. sorry my bad english. can someone help me about this device?
also my friend has same device with running android os. maybe it can be useful to unbrick my device.
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
Please consider posting your question here:
http://forum.xda-developers.com/showthread.php?t=2259645
That is a friendly help thread where you're sure to find expert advice.
Good luck!