LG d958 SuperBrick needs help
OTA softbricked my phone. was pinned to TWRP. then since i am super noob, i destroyed my recovery to get to fastboot. when i get to fastboot still super super noob flashed cwm recovery. now i have "secure boot error". if i connect to computer after this secure boot error i will have "Marshall London HS-USB Diagnostics 9006 (com7)", if i uninstall +removing driver for this i got "Qualcomm HS-USB Diagnostics 9006 (com7)". luckily or not lucky i can go to download mode. when i tried LGFLASHTOOL it gives me "CrossDl [d959] to [d958] swversion" error. when i tried hex editing the "tot" file which is "BIN_LGD958AT-00-V20a-HKG-XX-MAY-14-2014+0.tot" replacing d958 with d959 i got "Failed PreviousLoad" error. i've tried so may times still "Failed PreviousLoad". now I am stuck with finding ways to get back to adb or fastboot but no luck to connect. I am emploring your kindness to please help me resurrect my beloved d958. please.......... one more thing after LG Logo super loop i got LG security error. hahaha i know i'm f### please help me geniuses out there. promise i will not mess with rooting again.
Hi,
Thanks for writing to us at XDA Assist.
You can post your question in your device forum help section to get further help:
G Flex Q&A, Help & Troubleshooting
Good luck!
Related
So I have a lg g2 d802. I purchased it yesterday. I am fond of android devices and have had them before. So first of all I rooted my device using kingo rooter software it worked. To install custom ROM I needed recovery. So I googled and found that I needed to install software known as autorec. I installed that the installation went smooth. When I clicked reboot to recovery. My phone restarted in fastboot mode with no access to recovery or download mode. By searching around on the net I found fastboot commands and some how miraculously erased partition. Recovery. Etc I got it to work the download mode. And stuff. My phone was restored but the touch was way out of order. Not usable at all. I searched and found out that installing stock ROM kdz with the help of lg flash tool will fix the case. I did that but after wards my phone boots and gets stuck on boot screen lg logo. I press volume down n power I get factory reset which doesn't work. Same thing happens. I get download mode with screen of five dots only no USB made as before. So I am stuck Here. Fast boot doesn't work now either. Lg flash tool doesn't recognize my device either. With many tries I am only able to get lg Android net or mtp in device manager but doesn't help the process in anyway. Please help me I bought phone out of my savings just yesterday and cant afford a new one. I think the idea would be to get download mode working again?
Hi there,
You'd be best served asking for help from the experts who own your device, here:
[HELP THREAD][Noob Friendly] LG G2 Ask any question
But before asking something please read this threads:
LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK]
[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2
[FIX] Bricked LG G2 D800/1/2/3 FlashTool Fail Fix Download Mode Only
Good luck
Hi guys! I have an LG G2 D802 model. I tried flashing a rom through twrp but it failed. I wiped the partitions again and then I gave it the command to reboot into recovery but that was it...the phone didn't start anymore.
If I connect it to the PC sometimes it says that the USB can't be recognized and other times it says this: "Forge HS-USB QDLoader 9008 (COM5)". The COM port changes eveytime I connect it again to the PC.
I tried different methods of making it work..with the LG G2 flashtool, the LGG2_9008_fix, srktools, following this thread: http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but none was a success.
Can maybe someone of you help me?
Thanks a lot!
XDA Visitor said:
Hi guys! I have an LG G2 D802 model. I tried flashing a rom through twrp but it failed. I wiped the partitions again and then I gave it the command to reboot into recovery but that was it...the phone didn't start anymore.
If I connect it to the PC sometimes it says that the USB can't be recognized and other times it says this: "Forge HS-USB QDLoader 9008 (COM5)". The COM port changes eveytime I connect it again to the PC.
I tried different methods of making it work..with the LG G2 flashtool, the LGG2_9008_fix, srktools, following this thread: http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but none was a success.
Can maybe someone of you help me?
Thanks a lot!
Click to expand...
Click to collapse
Fortunately there are many unbrick guides for your device, e.g.:
Unbrick your LG G2 D802 - Back to stock by flash kdz by Ceovip
LG G2-D802 Unbrick Device by g0dsend313 (mlm1102003) by mlm1102003
[GUIDE] Hard Brick Recovery LG G2 by etm34
[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2 by Partager.info
[FIX] Bricked LG G2 D800/1/2/3 FlashTool Fail Fix Download Mode Only by MK45A
If nothing helps, please register on xda and ask in the [HELP THREAD][Noob Friendly] LG G2 Ask any question by XxZombiePikachu.
There are many experienced users having the same device like you ... so best place to get proper help and advices.
Good luck !
Thread closed. Thank you!
Help! i tried to use a twrp recovery i found with flashify because i thought it could help me install a system update that wasn't installing some reason. it was probably not meant for cricket stylos so now im stuck in a boot loop with the LG logo with
[620]
[620]security booting Error!
[620]Error code: 1003
[620]
the phones has 5.1.1 lolipop and is rooted, and i used kingroot to root and switched to supersu using a guide i found. not sure if download mode work because its just stuck at 0% for some firmware update. but my pc does detect it in device manager but it says "this device cannot start (code 10)".
im searching around but i can't seem to find one that is meant for my phone. Could someone please~ help me unbrick it or find a thread that i should follow? im really lost right now and i would really appreciate some help
Hi,
There are many threads here or try posting your question here:
LG G Stylo Discussion
The experts there may be able to help.
Good luck!
my lg exceed 2 is bricked by installing twrp.. no power, no recovery, no download mode.. i finally got computer to see phone as qualcomm hs-usb QDLoader 9008 (com4). i also got software QFIL to see phone in Download Mode but cant seem to to get it to repair and ESF Professional Qualcomm NV Tools to see phone in Online Mode but can not repair im not fimilar with these two software's so that might be a reason.. With QFIL i have problem with Programmer Hex saraha but does see phone in Download Mode. With QualComm NV Tools it detects phone in OnLine Mode and Mobile Model ID as "FFA/SURF 7630 (NAND)" and SPC is rejected by phone.. i can change phone modes with Qualcomm NV tools if that can help.. LGFlashTool and BoardDiag 3.99 does not see phone.. can someone please help me its going on a month bricked and phone still has service.. i did root phone with kingroot before installing twrp which bricked my phone. Also phone does disconnect and reconnect to pc every so often..
Hello and thank you for using XDA Assist,
please ask you question in our Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards
Trafalgar Square
XDA Assist
I have a Lenovo A816 and after a first attempt of re-flashing to factory firmware i got an error of unable to connect now my phone is unable to startup when i try to reboot i get a long vibration and that's i PLS HELP
Dev Manager ORT
Marshall London HS-USB Diagnostics 9006
This is an error tha i get it now every time i try o re-flash
//**
Download Fail:System.Exception: Failed to Switch to Emergency Download mode
at QC.QMSLPhone.Phone.QPHONEMS_SwitchToEDL()
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
Download Fail:Switch To EDL FailSystem.Exception: FireHose Fail
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
at QFIL.Tech.DownloadTech.SwitchToEDL()
Finish Download
**//
Is here a way o ake the phone ou of DownloadMode?
mitusseuropa said:
I have a Lenovo A816 and after a first attempt of re-flashing to factory firmware i got an error of unable to connect now my phone is unable to startup when i try to reboot i get a long vibration and that's i PLS HELP
Dev Manager ORT
Marshall London HS-USB Diagnostics 9006
This is an error tha i get it now every time i try o re-flash
//**
Download Fail:System.Exception: Failed to Switch to Emergency Download mode
at QC.QMSLPhone.Phone.QPHONEMS_SwitchToEDL()
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
Download Fail:Switch To EDL FailSystem.Exception: FireHose Fail
at QC.SwDownloadDLL.SwDownload.SwitchToEDL()
at QFIL.Tech.DownloadTech.SwitchToEDL()
Finish Download
**//
Is here a way o ake the phone ou of DownloadMode?
Click to expand...
Click to collapse
Hi mitusseuropa
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.