Database Info

k4 note bootloader unlock and twrp

K4 Note marshmallow version working fine with this method used(fingerprint works fine,xposed is there,Rooted) no bug found until now
Check it here
https://youtu.be/f4kfvGkoMOk
Rather than saying the method didn't worked please comment with error or problem you are facing
##if you get blank screen or phone again reboots to stock recovery,then do this enable oem unlock again in dev. Settings. This phone's Lollipop stock system sometimes relocks the bootloader by itself. Check it by entering this command in fastboot "fastboot getvar all" in end it will show if it is unlocked or not
+if it shows unlocked and phone on booting to recovery shows blank screen or bootloops
Do this go in sp flash tool
Select scatter file from extracted folder in patch and tick preloader file .get into advance mode of flash tool in write memory option select the recovery.by.gursewak.img file from recovery folder in file path. Change begin address to 0x2d80000 and region is EMMC_USER And click write and connect switched off phone to pc. After success .reboot the phone.
***All files are moved here permanently the links were removed due to file host was not allowed on xda .it was not due to any other reason as told by the spoiler***
All files here
http://its10.wapka.me/site_1.xhtml
***Heres the video link
Files linked above
Updated files
Recovery+bootloader unlock
Files linked above
Stk-
Files linked above
Flash tool-
Files linked above***
METHOD FOR LENOVO K4 NOTE OR A7010A48 (3GB RAM+16GB ROM VERSION ONLY)(Will work on lollipop as well marshmallow )
#there are 2 methods told to flash recovery please try second method if first don't work
#Important:-On lollipop version fingerprint will not work with twrp installed (trying to sort it out) . solution given in video.
[DON'T TRY ON ANY OTHER VARIANT OTHER THAN MENTIONED ABOVE IT MAY BRICK YOUR PHONE I AM NOT RESPONSIBLE FOR THIS]
NOTE1:IF SOMEONE IS HELPING YOU, DON'T TRY TO HURT HIS FEELINGS. I WILL NOT GET ANY PRIZE OR SALARY FOR THIS
THIS METHOD HAS BEEN SUCCESSFULLY TESTED ON 3 LENOVO K4 NOTE HANDSETS WITH 100% SUCCESS RATE SO NO CHANCES OF FAILURE.
ALSO READ POST#2 AND POST#3 FOR MORE HELP
NOTE2:THE FILES EXCEPT RECOVERY(WHICH HAD TO BE MODIFIED TO WORK WITH K4) HAS NOTHING TO DEAL WITH RUSSIAN FORUM.(IF YOU THINK SO ,JUST DOWNLOAD THAT FILES ALSO FROM THAT RUSSIAN FORUM AND TRY TO FLASH THEM AT YOUR RISK AND IF YOUR PHONE BOOTS UP WITH THAT RUSSIAN FILES I GUARANTEE I WILL REMOVE THIS POST.)
Files in above link sorry again for clearity but you may check its uploaded on 27-3-16 i.e. before making this thread
I never post without testing more than once
MOREOVER THE FILES TO BE FLASHED ARE CREATED BY LENOVO SOURCE CODE FOR K4 NOTE SO NO CHANCES OF BRICKING. IT WILL SURELY WORK.
I WILL NOT FORCE YOU TO TRY THIS METHOD BUT I GUARANTEE IT WILL WORK BUT DON'T SPAM THE THREAD BY SAYING "THESE FILES ARE RUSSIAN FORUM FILES"," YOU SHOULD HAVE TRIED ON YOUR PHONE BEFORE POSTING" FOR THAT PEOPLE I WILL SAY JUST STAY AWAY FROM THIS THREAD
hello friends
lenovo k4 note's bootloader unlock for lollipop version is successful. iam sharing the procedure for this but please do as i says or i am not responsible for any bootloop or anything happening to your phone.
WARNING:USERDATA WILL BE ERASED***
ok heres the process
requirement-
SP flash tool(already present in stock rom file) or get it here(Recommended)
File linked above
lenovo k4 note zip file by gursewak.10 get it here File linked above
and extract in a drive in your pc
ok switch off the phone
(1) open sp flash tool
load scatter file from the folder 'patch' in extracted folder provided
tick preloader file if there is no preloader file showing in there select the file preloader file(preloader.bin) from 'patch' folder.
ok flash it to your phone
disconnect it after flash tool showing download ok
don't switch on
(2) now press ctrl+alt+v to get sp flash tool in advanced mode
ok click option window in flash tool tick write memory.
tick the preloader file
go to write memory option
click file path and select uboot.bin file from folder 'patch'.
select begin address and write this address there 0x1c80000
region should be EMMC_USER
click write memory and connect switched off phone to pc
after showing write memory ok message disconnect mobile
(3) ok switch on the phone by pressing both vol. buttons untill stock recovery appears
erase user data here and reboot
after fully bootup
go to phone settings>>developer settings(if doesn't appears goto settings>>about phone>>device information >>tap build number untill it shows "now you are a developer"
enable developer options
enable oem unlocking
enable usb debugging
(4) connect to pc
click unlock_recovery.bat file in extracted folder
>>also at one time phone will ask to unlock the bootloader ,confirm by pressing volume +
>>watch the command prompt for messages and continue by pressing enter after reading instructions in command prompt.
>>after doing disconnect the phone and switch it on by pressing power button untill vibrate.
here you go THE BOOTLOADER UNLOCK AND CUSTOM RECOVERY INSTALLATION IS SUCCESSFUL.
NOTE: warranty get void on unlocking bootloader but you may lock bootloader anytime to get your warranty.
Thanks to sevenmaxs for recovery but somewhat moded by me.

Get xposed installation file via twrp recovery here
Files linked above
For xposed apk
Files linked above

UPDATE: I HAVE TRIED THIS METHOD ON LATEST lollipop UPDATE THAT WAS OF ABOUT 33MB
BUT MAY OR MAY NOT WORK ON EARLIER VERSIONS
FOR MARSHMALLOW THERE IS NOTHING THAT IT WILL NOT WORK
BUT YOU MAY TRY THIS COME BACK TO LOLLIPOP , TRY THIS METHOD AND FLASH MARSHMALLOW UPDATE VIA TWRP RECOVERY ALSO FLASH SUPERSU LATEST 2.65 OR ABOVE VIA TWRP.

Reserved 3

Reserved 2

Reserved 1

What about marshmallow version?

Ayan Uchiha Choudhury said:
What about marshmallow version?
Click to expand...
Click to collapse
Same method

Anybody tried this?

In my yureka when I used the KitKat method on lollipop, mobile got bricked. So you sure this will work on marshmallow even when it's for lollipop?

Marshamallow updated. How to root it? King root V4.8.2 not yet provided rooting for Lenovo K4 Note.

I would like to know if it will work for my device be4 i try it
My mobile as the lenovo site called it Lenovo Vibe k4 (a7010a48)
Bcs many names of the a7010 and till now really i cant understand the differents
Sent from my Lenovo A7010a48 using Tapatalk

Marshmallow has a doubt on this
Ayan Uchiha Choudhury said:
In my yureka when I used the KitKat method on lollipop, mobile got bricked. So you sure this will work on marshmallow even when it's for lollipop?
Click to expand...
Click to collapse
Lollipop is rooted before but not Marshmallow so may not work
. Let me see and say.

ramisumi said:
Lollipop is rooted before but not Marshmallow so may not work
. Let me see and say.
Click to expand...
Click to collapse
Ian running marshmallow 6.0 in k4
Tried all m methods to root but no happy
Got boot loader unlocked but can't flash twrp
Even flashed can't boot

chsaiteja98 said:
Ian running marshmallow 6.0 in k4
Tried all m methods to root but no happy
Got boot loader unlocked but can't flash twrp
Even flashed can't boot
Click to expand...
Click to collapse
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.

ramisumi said:
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.
Click to expand...
Click to collapse
Now I am trying this method for marshmallow if something happens I'll go to lollipop and do the same if works I'll post in a hour or two wait bro

ramisumi said:
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.
Click to expand...
Click to collapse
did the 6.0 come with unlocked bootloader or did you unlock it somehow??

Not working on Marshmallow. The part is Rooting first otherwise goes nothing. TWRP is not Installing. TWRP provided here is of Sevemaxs so as before is same.
---------- Post added at 01:14 PM ---------- Previous post was at 01:08 PM ----------
Ayan Uchiha Choudhury said:
did the 6.0 come with unlocked bootloader or did you unlock it somehow??
Click to expand...
Click to collapse
No. Marshmallow has no provision but here is: http://forum.xda-developers.com/general/general/marshmallow-lenovo-k4-note-bootloader-t3343864

gursewak.10 said:
hello friends
lenovo k4 note's bootloader unlock for lollipop version is successful. iam sharing the procedure for this but please do as i says or i am not responsible for any bootloop or anything happening to your phone.
WARNING:USERDATA WILL BE ERASED***
ok heres the process
requirement-
SP flash tool(already present in stock rom file) or get it here(Recommended) https://userscloud.com/jrdb0m4eo5cd
lenovo k4 note zip file by gursewak.10 get it here https://userscloud.com/09wtwq65i99n
and extract in a drive in your pc
ok switch off the phone
(1) open sp flash tool
load scatter file from the folder 'patch' in extracted folder provided
tick preloader file if there is no preloader file showing in there select the file preloader file(preloader.bin) from 'patch' folder.
ok flash it to your phone
disconnect it after flash tool showing download ok
don't switch on
(2) now press ctrl+alt+v to get sp flash tool in advanced mode
ok click option window in flash tool tick write memory.
tick the preloader file
go to write memory option
click file path and select uboot.bin file from folder 'patch'.
select begin address and write this address there 0x1c80000
region should be EMMC_USER
click write memory and connect switched off phone to pc
after showing write memory ok message disconnect mobile
(3) ok switch on the phone by pressing both vol. buttons untill recovery appears
erase user data here and reboot
after fully bootup
go to phone settings>>developer settings(if doesn't appears goto settings>>about phone>>device information >>tap build number untill it shows "now you are a developer"
enable developer options
enable oem unlocking
enable usb debugging
(4) connect to pc
click unlock_recovery.bat file in extracted folder
>>also at one time phone will ask to unlock the bootloader ,confirm by pressing volume +
>>watch the command prompt for messages and continue by pressing enter after reading instructions in command prompt.
>>after doing disconnect the phone and switch it on by pressing power button untill vibrate.
here you go THE BOOTLOADER UNLOCK AND CUSTOM RECOVERY INSTALLATION IS SUCCESSFUL.
NOTE: warranty get void on unlocking bootloader but you may lock bootloader anytime to get your warranty.
Thanks to sevenmaxs for recovery but somewhat moded by me.
Click to expand...
Click to collapse
Bro, The preloader file you shared here, is this same that's present on Russian Lenovo forums.
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app

the only part has Gursewak.10 done is to modify unlock_recovery batch file to which recovery is to flash only of Gursewak.10. Else everything was lying on net before a few days.

QMobile Noir E2 Root Method (No Bootloader Unlock Method Added)

Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
fastboot reboot
Click to expand...
Click to collapse
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!ewVSyI7B!xAvgnzYORGFCtXLyxerNt9hx8Awz-5hNO2vlz5uabfo
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.

Reserved
1) SDCard works fine with recovery
2) Found identical device . Panasonic Eluga A3
3) Will test Recovery of Eluga A3 soon :fingers-crossed:

i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"

bluedrago said:
i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"
Click to expand...
Click to collapse
The Stock System of Noir E2 is Encrypted ..... all nougat based systems are encrypted
You need to backup all data in internal storage to your pc and go to TWRP and Go to Wipe and CLICK ON FORMAT DATA BUTTON
that will remove encryption and allow you to flash zip files

Do you have any custom rom for qmobile e2 like Cm14 rom or miui rom or any other
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.

Aqdas Iftikhar said:
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.
Click to expand...
Click to collapse
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply

Yes I Want Bro. Also share the method to port/Flash it. And have u tested it.
andromodgod said:
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply
Click to expand...
Click to collapse
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.

Aqdas Iftikhar said:
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.
Click to expand...
Click to collapse
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.

I got an error in sp flash tool and also Non removable battery problem
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.

Aqdas Iftikhar said:
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.
Click to expand...
Click to collapse
Download Latest Version of SP Flash tool from http://spflashtool.com
Then extract the Downloaded OS into a separate folder on your desktop.
Then open SPFlash tools and Switch off your device ...
Load the scatter file on to SPFlash tolls that you extracted ... It will be in the OS folder with all the .img files.
Press the start button.
Then connect your device to the PC ... Remember device must be switched off properly.
Flashing should begin automatically.

Many Thanks bro I have flashed the ROM successfully
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.

Aqdas Iftikhar said:
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.
Click to expand...
Click to collapse
i forgot ... the link that i shared had the lastest update already .

I tried to root my device and in fast boot i encountered a problem
andromodgod said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.
Click to expand...
Click to collapse
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom

Aqdas Iftikhar said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Press enter
then type
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom
Click to expand...
Click to collapse
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though ??

andromodgod said:
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though
Click to expand...
Click to collapse
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:

Aqdas Iftikhar said:
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:
Click to expand...
Click to collapse
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.

I have rooted my device but cannot boot into system twrp opens again and again.
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro after rooting my device i restarted my device but twrp recovery boots again and again and not boot the system.
in twrp i selected to reboot to system but it open twrp recovery again.
i wipe the data and cache but still twrp is openeing.
plzz help me i even cannot acces my device in this situation.
Reply fast.
---------- Post added at 05:46 AM ---------- Previous post was at 05:29 AM ----------
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro tell me can i relock bootloader and remove or unflash twrp recovery after gaining root access.
if yes tell me how i can remove twrp recovery becasue it is irritating.
Plzz help me out.

When I click Mount/System it returns back to first option (Reboot) with a blink.
I am following first method.
Please help me.
PLzzzzzzzzzzzzzzz

PLz update the link of magisk zip file
The current link is not working. So plz update the link of magisk zip file.

FIXED: Mount Internal Storage in TWRP (Q Mobile Noir E2)
To mount internal storage in TWRP Recovery, Click on Wipe > Format Data > Type "yes" and Click on Ok. Then Reboot into Recovery. Now your Internal Storage is Mounted in TWRP. But it will format whole internal storage and factory reset rom so make a backup before doing this.

Root & Put TWRP recovery on NUBIA N1 Lite

HI All,
I am unable to Root or install TWRP recovery on ZTE Nubia N1 Lite.
I have googled for the same a lot , but no luck
Anybody out there .... who has accomplish the same
When i put the command "adb reboot bootloader" , it doesn't go in fastboot mode , it simply restart :crying:
Many post says that the bootloader is locked in ZTE Nubia & can not be opend
Please Help............................................

Hi, have you tried enabling OEM in dev mode? I would like to have root on this device as well but i guess i'll wait.

Kryptak said:
Hi, have you tried enabling OEM in dev mode? I would like to have root on this device as well but i guess i'll wait.
Click to expand...
Click to collapse
Yes its already there no luck so far :crying:

Root & Put TWRP recovery on NUBIA N1 Lite??

dluxseo said:
Root & Put TWRP recovery on NUBIA N1 Lite??
Click to expand...
Click to collapse
yes

deleted

Hi, I tried the SP tool, but it requires me to load a scatter file. Where to get the file?

deleted

masterblaxter said:
use this one
Click to expand...
Click to collapse
Thanks. Let me try.

poojprabhu said:
HI All,
I am unable to Root or install TWRP recovery on ZTE Nubia N1 Lite.
I have googled for the same a lot , but no luck
Anybody out there .... who has accomplish the same
When i put the command "adb reboot bootloader" , it doesn't go in fastboot mode , it simply restart :crying:
Many post says that the bootloader is locked in ZTE Nubia & can not be opend
Please Help............................................
Click to expand...
Click to collapse
Hey!
I have the same phone, had the same issue. Rooting with Magisk works perfectly. You guys can get the scatter from the stock ROM, download it (the ROM), or dump it from your device (I not tired that). Bury unfortunately, there's no official or unofficial TWRP for this phone

I have ported twrp from source working with n1lite
Instructions:
OEM-Unlock must be enable in developer options on your phone
-extract recovery.img
-Flash with SpFlash tools (download only mode) & attached scatter file (from stock rom)

LineageOS 13.0 ported from Homtom HT17
Instructions:
Boot in to recovery
-Full backup your rom
Advanced wipe: Dalvik/ART Cache,Cache,Data,System
Install ROM: https://ufile.io/44y1a
Install Gapps: https://opengapps.org/?api=6.0&variant=pico
not working:
-fingerprint
-BT a2dp
tell me

[GUIDE] Root Huawei Honor 8 Lite and install TWRP custom recovery (EMUI 5.X)

Note-
Applicable for Windows 7, Windows 8 and Windows 10
Similar steps are applicable for EMUI 4.X as well but TWRP file will change.
Hi Folks,
Just adding this guide for rooting method for Honor 8 Lite. This was tested by one of the user referring my original guide for Honor 6X and confirmed this is working absolutely fine. I will just simplify the steps so that any new users can do this without any problem and without any prior experience to rooting, it may be long but will be the simple enough for all the users.
Prerequisites-
Enable the developer option in settings-
Go to Settings--> About Phone-->Tab build number 7 times to enable this setting.
Go back in setting page, just above system update, you will see a new menu as -Developer Options
Scroll for the debugging section and enable the USB Debugging
You will be prompted for the confirmation with RSA key, just accept it.
Enable OEM Unlock in Developer Options (just above the USB debugging option) – Most probably this option will not be there on EMUI 5.0 (only few have seen on EMUI but it was there on EMUI 4.1 for all but rarely on EMUI 5.0)
Please note down you build number, this may become handy in case something goes wrong to restore your phone via DLOAD. In Settings- About phone- Build Number
Installation of required Drivers.
Connect your phone to PC and install Hi Suite on PC and it will additionally install all the necessary drivers to PC and HiSUite on Mobile.
Download and Install ADB from Link
Accept all the prompts and install ADB drive system wise.
Once installation is completed, if default options are chosen, it will be under C:\adb
Downloading the necessary files.
Download TWRP from Link Thanks to @OldDroid for his Original Thread and @surdu_petru & @XePeleato- This was not possible without their excellent work.
Move the downloaded file under C:\adb or wherever you have installed the ADB.
Download the SuperSU file from this Link and put it in SD card or keep handy on PC so that you can copy to internal memory later.
Get the unlock as mentioned in this thread
Actual Procedure
Unlocking the bootloader-
Backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
On windows machine, go to folder C:\adb or wherever you installed the adb drivers.
Press shift+right click together and select Open command prompt here (it will be open PowerShell here on Windows 8 and Windows 10 machine)
Run - adb reboot bootloader (this command may prompt for acceptance of RSA key if not already accepted)
This will boot the phone into bootloader mode.
Run - fastboot oem unlock <16 digit unlock code- Put your actual code you obtained from Huawei site > (This step will unlock the bootloader and will erase all your data)
Phone will restart automatically.
Installing TWRP
Once on the system, open the PowerShell or command prompt again in ADB folder (can use the previous instance as well)
Run - adb reboot bootloader
Once in bootloader, Run - fastboot flash recovery twrp-3.1.1-0-berlin.img (This will install the TWRP recovery for EMUI 5.0 on your phone)
Once done with the flashing the TWRP, Run - fastboot reboot
Rooting
Once booted to system, open the PowerShell or command prompt in ADB folder (can use the previous instance as well)
Run - adb reboot recovery
And your phone will boot into the TWRP recovery by Open Kirin Team.
Copy the SuperU file downloaded to SD card or Internal memory.
Install the SuperSU zip.
Reboot and enjoy the complete ownership of the device with root permission and happy Flashing the custom ROMs
Video tutorial by @PaulR11 here for 6X, this will remain the same.
https://youtu.be/blPs9FOsaHE​

If I want to install magisk on stuck rom should I follow this solution ?
Any chance to root without unlocking boot rom?

I followed the instructions but my phone reboots itself continuously and does not boot to system. Any ideas?

kareemhafez87 said:
I followed the instructions but my phone reboots itself continuously and does not boot to system. Any ideas?
Click to expand...
Click to collapse
remove the USB cable and hard boot it. if needed, do factory reset.

Honor 8 lite bootloop
kareemhafez87 said:
I followed the instructions but my phone reboots itself continuously and does not boot to system. Any ideas?
Click to expand...
Click to collapse
Hi, am also having the same problem here! I unlocked the bootloader okay, flashed twrp okay, but when flashing SuperSU I got multiple errors at the end of which when I restarted the system my phone started to boot loop. Its now showing Huawei eRecovery but am getting the message "Getting Package info Failed". How do I recover from this???

Mr Tots said:
Hi, am also having the same problem here! I unlocked the bootloader okay, flashed twrp okay, but when flashing SuperSU I got multiple errors at the end of which when I restarted the system my phone started to boot loop. Its now showing Huawei eRecovery but am getting the message "Getting Package info Failed". How do I recover from this???
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8...eturned-to-stock-rebranding-gr3-2017-t3749832 you can try this method

player98343 said:
https://forum.xda-developers.com/p8...eturned-to-stock-rebranding-gr3-2017-t3749832 you can try this method
Click to expand...
Click to collapse
Hi, thanks for the reply. This post seems to be about the GR3 2017, however I am using the Honor 8 lite...

Mr Tots said:
Hi, thanks for the reply. This post seems to be about the GR3 2017, however I am using the Honor 8 lite...
Click to expand...
Click to collapse
it's the same device

move apps to SD
Can you move apps to SD with rooted Huawei Honor 8 lite?
I am deeply unsatisfied that you simply cannot move apps to SD on this phone, and now I can't even update my system because there is no enough space to download the update...

How

Souvik 05u said:
How
Click to expand...
Click to collapse
??

player98343 said:
https://forum.xda-developers.com/p8...eturned-to-stock-rebranding-gr3-2017-t3749832 you can try this method
Click to expand...
Click to collapse
-is this method working? im stucked too. im using huawei nova lite PRA-LX2

nazrin16 said:
-is this method working? im stucked too. im using huawei nova lite PRA-LX2
Click to expand...
Click to collapse
You can try what I know is nova lite is also p8 lite 2017 but it will change your device to pra-lx1

Is this working for honor 8 lite with emui 8.0, or i just need to change twrp but the steps are the same?

LukaSenpai said:
Is this working for honor 8 lite with emui 8.0, or i just need to change twrp but the steps are the same?
Click to expand...
Click to collapse
Steps will remain same, you need twrp for oreo and camt confirm of SuperSU is working but you cam try magisk

magisk link
shashank1320 said:
Steps will remain same, you need twrp for oreo and camt confirm of SuperSU is working but you cam try magisk
Click to expand...
Click to collapse
Hi, can you post the link to magisk to be used? I have EMUI 8.0
Thanks a lot

[ROOT][TWRP] Wiko Sunny 2 (SPD7731C) Root process with TWRP port (buggy touch)

Hi all! Now we can root our Sunny 2 phones!
I'd make a TWRP port for this device (adb enabled) so we can just sideload the Magisk installer.
History:
After some time having a Wiko Sunny 2 phone, I'd search a lot and didn't find any method for rooting this little thing.
Then I had the idea to mod the stock recovery to allow test keys and then flash anything, tried to do that and didn't work.
Another idea came to my mind: port TWRP from another phone with same chipset. Started my search for a SPD7731c device with working TWRP and after some time found some guy who made a TWRP port for his "Selecline S6S4IN3G" device and as it had the same chipset it worked. Just gathered the recovery.img from the stock rom (thanks Wiko for giving it on they web page) and unpacked it with carliv image kitchen, replaced the stock ramdisk with TWRP's one and just modded some things inside it (default.prop and the init.rc files). As the vold.fstab is the same, didn't need to modify it.
After some testing, the only problem remaining is that the touch doesn't work well (it receives touch input all the time, even if not touched) but it's enough to get our Sunny2's rooted via ADB and magisk's zip.
REQUIREMENTS:
A PC (or another phone with OTG support, if you use a phone then you'll also need an adb binary compiled for ARM)
ADB, Fastboot and drivers: https://drive.google.com/open?id=1N38jqQqX87dEKsBIgDb_9MC-k43YUi85
TWRP image: https://drive.google.com/open?id=1DZhL6RckvzQyxGCq2Yy64Cqnpnnm1Ofp
Stock recovery image (in case something goes wrong you can revert to this): https://drive.google.com/open?id=1spaFc1sqqjFdwzt9cYDfSO_KVh1aYuh5
Magisk ZIP (can be latest or this zip): https://drive.google.com/open?id=1-OPU1JycSr8nVyAGfdkhdajn8Uap_0dl
ROOT PROCESS:
1. While on Android, go to Settings>About this device and toch 7 times Build number (this will enable Developer Options)
2. Now go back to Settings and then Developer options>Enable OEM unlock and USB debugging.
3. Connect the device to the PC and install the correct driver (for doing this just open Device Manager and force the install of Android Composite ADB Interface on your unrecognized device (should be called SUNNY2)).
4. Open a CMD/Terminal and type this:
Code:
adb reboot-bootloader
5. Now type
Code:
fastboot flash recovery path/to/twrp-suny2.img
and after that just
Code:
fastboot reboot
.
6. Now the phone will start, just type in CMD/Terminal
Code:
adb reboot recovery
and you will boot into TWRP.
7. Okay, this TWRP has a buggy touch so just use ADB to install the magisk zip:
Code:
adb shell twrp sideload
, then
Code:
adb sideload path/to/magisk.zip
and finally
Code:
adb reboot
.
8. Nice, now Magisk should be installed. Now with root access, happy modding!
Some things to note:
1) In this guide I did everything via ADB, never booted to recovery or fastboot using button combinations. Why? Simple, on my device I didn't find the correct combinations.
2) You can use TWRP also for factory resetting or installing anything, but via ADB only (as the touch doesn't work properly).
3) If you need any help with this device just PM me!
I hope this guide will be useful for anyone.
CREDITS:
This guy for his work on porting TWRP to his device
Magisk team for his work on making root as simple as flashing a ZIP!
AndroidMTK website for hosting the ADB installer which
I just mirrored!

Stuck in boot loop
Hi ! Thanks for the HowTo !
But...
I followed the exact same procedure (except I had to fastboot oem unlock before flashing the twrp image, in addition to unlocking it in dev mode).
After flashing, the device was stuck in a boot loop : "orange state your device has been unlocked and can't be trusted / your device will boot in 5 seconds". Tried all manners of key combos to reboot in recovery (Vol Up + power is supposed to be the right combo) but to no avail.
Fortunately Wiko provides an "upgrade" tool that allows you to factory reset the device (support dot wikomobile dot com /maj/Sunny2Plus_V24.zip, window$ only) but no luck installing twrp.
Any idea why ? Thanks in advance

tofleplof said:
Hi ! Thanks for the HowTo !
But...
I followed the exact same procedure (except I had to fastboot oem unlock before flashing the twrp image, in addition to unlocking it in dev mode).
After flashing, the device was stuck in a boot loop : "orange state your device has been unlocked and can't be trusted / your device will boot in 5 seconds". Tried all manners of key combos to reboot in recovery (Vol Up + power is supposed to be the right combo) but to no avail.
Fortunately Wiko provides an "upgrade" tool that allows you to factory reset the device (support dot wikomobile dot com /maj/Sunny2Plus_V24.zip, window$ only) but no luck installing twrp.
Any idea why ? Thanks in advance
Click to expand...
Click to collapse
Hmm this device is pretty strange, his key combinations never worked for me (because of that I'd need to reboot into system a few times, instead of booting to fastboot with keys).
You can try this:
After flashing stock rom and allowing oem unlock on settings, reboot directly to fastboot. Then use "fastboot boot recovery.img" and tell me what it says. If it says something about bad boot image, it's normal (that happens in my device even if try to load stock boot.img).
Also there's a tool called SPD Research Download Tool, which let's you flash the phone partitions one by one (manually selectable) from the path you want, while phone is in download mode (volume down and connect USB to PC). However, I don't know if that tool's license allows it's free redistribution, so I recommend research for it before downloading anything.
You can get the stock files by running the wiko upgrade tool, going to the folder it extracted his files and then looking for a file called rom.pac (then unpack it, there are guides here on XDA for doing so). You can even edit the boot splash image lol

Sorry for wasting your time
I'm so stupid ! It turns out my device is a different model, the Sunny 2 Plus.
Sorry, and thanks again

Does anyone know if a custom rom exists for the Wiko Sunny 2?

Klab98 said:
Does anyone know if a custom rom exists for the Wiko Sunny 2?
Click to expand...
Click to collapse
Nope, sold the device some days after writing this post so didn't even bother to port anything.
BTW it's a 4-core phone with 512MB RAM, so what would you expect to run there? I thing nothing higher than MM (KK would be nice if it was not so outdated nowadays)

Hi, i have got a problem with my wiko sunny 2 plus.
i flashed twrp via fastboot, it succeed. but after reboot the phone didnt start,
only shows orange state, didn´t connect to pc anymore with same cable. i mean i can hear the win7 sound of connecting device and right after connect sound appear then disconnect sound follows right after. so i cant detect the device with adb anymore. what to do, any idea? P.S. sp flashtool also cant detect device. greets

merci beaucoup j espere sa marche