Does anybody know how to disable the temperature sensor? My phone's sensor is not working, temp is shown as -302ºC, so I can't charge the phone unless it is on recovery mode.
Disabling it, I'm not sure. Have you tried factory reset, etc?
In Kernel Adiutor app which comes with Resurrection Remix ROM (and also works with other custom ROMs) you can change the thermal threshold to be as high as you want. You can even download that app from the Play store.
Kernel Adiutor (ROOT)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=en
Changing it in stock firmware, I don't know. You don't say if your bootloader is unlocked and whether you are rooted or not. Kernel Adiutor needs root.
But be VERY careful. The phone gets very hot anyway sometimes. When I was visiting Brazil in Mato Grosso (hot weather) and was installing a lot ROM updates in Recovery, I would stick the phones in the freezer for a few minutes to cool them down while they rebooted and optimized all the apps.
---------- Post added at 08:27 PM ---------- Previous post was at 07:44 PM ----------
another choice, perhaps
[XPOSED] Sensor Disabler
https://play.google.com/store/apps/details?id=com.mrchandler.disableprox&hl=en
This app can be used to disable your proximity sensor along with other sensors on your device.
Click to expand...
Click to collapse
and here's a third, but sounds like it's a plug in to a paid app....
GyroDroid
https://play.google.com/store/apps/details?id=com.prefrontalcortex.gyrodroid&hl=en
This is the demo application for GyroDroid, a Unity3D plugin which enables access to the native Android sensors.
So far Unity has only built-in support for the accelerometer/gyroscope sensors on Android mobiles.This package provides access to every single sensor of your Android device!
Click to expand...
Click to collapse
Feature list of GyroDroid 5.2:
support for every single sensor Android is capable of:
Rotation Vector
Gyroscope
Accelerometer
Linear Acceleration
Gravity
Light
Proximity
Orientation
Pressure
Magnetic Field
Processor Temperature
Ambient Temperature
Relative Humidity
Magnetic Field (uncalibrated)
Gyroscope (uncalibrated)
Game Rotation Vector
Step Detector
Step Counter
Geomagnetic Rotation Vector
you can do pretty much everything
check whether sensor is available
activate/deactivate sensor
set fetching speed
get info about power usage, manufacturer etc.
Click to expand...
Click to collapse
---------- Post added at 08:40 PM ---------- Previous post was at 08:27 PM ----------
Some more information for you:
Battery temp too cool
https://forums.lenovo.com/t5/Moto-X-Pure-Moto-X-Style/Battery-temp-too-cool/td-p/3299046
ChazzMatt said:
Disabling it, I'm not sure. Have you tried factory reset, etc?
In Kernel Adiutor app which comes with Resurrection Remix ROM (and also works with other custom ROMs) you can change the thermal threshold to be as high as you want. You can even download that app from the Play store.
You said "In Kernel Adiutor app which comes with Resurrection Remix ROM (and also works with other custom ROMs) you can change the thermal threshold to be as high as you want. "... Well, I hace Resurrection remix but i don't know how to replace The -32°, wich doesn't allow me to Charge the battery, into a normal temperature value.
Click to expand...
Click to collapse
Dal101 said:
Well, I hace Resurrection remix but i don't know how to replace The -32°, wich doesn't allow me to Charge the battery, into a normal temperature value.
Click to expand...
Click to collapse
Have you tried deleting the battery stats file in TWRP?
Where are the battery stats files located? I Will try to delete them.
Dal101 said:
Where are the battery stats files located? I Will try to delete them.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=74391392&postcount=6
Thank you very much.
I deleted the battery stats but nothing changed. The stats files were regenerated in the next boot, but the problem remains. I have the temperature sensor broken, so the battery won't charge because it's "cold"... I don't know how to workaround this... any help?
Dal101 said:
Thank you very much.
I deleted the battery stats but nothing changed. The stats files were regenerated in the next boot, but the problem remains. I have the temperature sensor broken, so the battery won't charge because it's "cold"... I don't know how to workaround this... any help?
Click to expand...
Click to collapse
Are you able to charge in TWRP recovery like the other guy? He was able to charge while in recovery, but not in his regular ROM.
Have you updated to the latest TWRP?
Have you completely re-set your device and re-installed ROM? Maybe try another ROM, just to see? Have you tried restoring factory firmware, just to see?
After all that, I'm out of ideas, maybe someone else has some?
How to disable temp sensor
Here ara my answers. Thank you for helping me.
ChazzMatt said:
Are you able to charge in TWRP recovery like the other guy? He was able to charge while in recovery, but not in his regular ROM.
I was only able to charge in the bootloader screen. While in TWRP menu, it's seems to charge for a couple of minutes only.
Have you updated to the latest TWRP?
YES, I have TWRP 3.1.1-0
Have you completely re-set your device and re-installed ROM? Maybe try another ROM, just to see? Have you tried restoring factory firmware, just to see?
YES, I tried several ROMS and restore/wipe factory firmware . None of then could charge in normal mode, with the operation system up.
After all that, I'm out of ideas, maybe someone else has some?
Click to expand...
Click to collapse
Dal101 said:
Here ara my answers. Thank you for helping me.
Click to expand...
Click to collapse
That's not the newest TWRP.
This is the TWRP you should be on, not any older.
twrp-3.1.1-mod_2-quark.img
https://androidfilehost.com/?w=files&flid=39562
it's the newest TWRP
ChazzMatt said:
That's not the newest TWRP.
https://androidfilehost.com/?w=files&flid=39562
Click to expand...
Click to collapse
I checked it in https://twrp.me/ and it seems to be the last version!
Dal101 said:
I checked it in https://twrp.me/ and it seems to be the last version!
Click to expand...
Click to collapse
My answer stands. If you go to our TWRP thread, @bhb27 explains you have to ignore that TWRP website. He got us "official" status with them, then they have ignored his improvements which are necessary for the newest ROMs.
Even in my bootloader unlock guide, I tell people to only use @bhb27 modded version. On the newer Nougat ROMs, the official TWRP version for Quark will mess up your phone.
ChazzMatt said:
That's not the newest TWRP.
This is the TWRP you should be on, not any older.
twrp-3.1.1-mod_2-quark.img
https://androidfilehost.com/?w=files&flid=39562
Click to expand...
Click to collapse
This one in for quark version, I'm looking for the "clark" version. Do you know where can I find the newest "clark" version? Thanks a lot.
Dal101 said:
This one in for quark version, I'm looking for the "clark" version. Do you know where can I find the newest "clark" version? Thanks a lot.
Click to expand...
Click to collapse
I assumed you had a Quark (Moto Maxx, Moto Turbo, Droid Turbo), since you didn't say otherwise and you are posting in the Quark forum... specifically in the "Q&A, Help & Troubleshooting" section. Yet, you don't have a Quark and I didn't know that.
You are probably using the latest version of TWRP for Moto Clark. My answers about TWRP were specifically for Quark and the modded versions from @bhb27 we need to use for latest ROMs.
I'm glad to help you anyway I can, but every phone model has idiosyncrasies best known to their user group. For CLARK (Moto X Style, Moto X Pure) have you tried seeking help in that Q&A, Help & Troubleshooting" section?
Moto X Style/Pure: Q&A, Help & Troubleshooting" section.
ChazzMatt said:
I assumed you had a Quark (Moto Maxx, Moto Turbo, Droid Turbo) since you didn't say otherwise and you are posting in the Quark forum... specifically in the "Q&A, Help & Troubleshooting" section.
Click to expand...
Click to collapse
you are so right!
I came here because of the title of the post and because I'm suffering the same problem
Dal101 said:
you are so right!
I came here because of the title of the post and because I'm suffering the same problem
Click to expand...
Click to collapse
You are probably using the latest version of TWRP for Moto Clark. My answers about TWRP were specifically for Quark and the modded versions from @bhb27 we need to use for latest ROMs.
And yes, any other answers about temperature sensors possibly could have helped you, since you are also using a Motorola phone. But in this case I'm out of ideas.
I'm glad to help you anyway I can, but every phone model has idiosyncrasies best known to their user group. For CLARK (Moto X Style, Moto X Pure) have you tried seeking help in that Q&A, Help & Troubleshooting" section?
Moto X Style/Pure: Q&A, Help & Troubleshooting" section.
Related
Upgrade LG G3 Stylus to Stock Lollipop Official
by:
Apriansyah Bintang
Alhamdulillah, those were the words in my mouth when it landed on LG G3 Stylus "in the middle of the fence." Finally "google potion" has come to us. Ok do not dwell upon this subject anymore! let's rock. But, there has to be understood first before upgrading this device to you who are still newbie :
A. COMMON QUESTIONS
Is the stock firmware of Lollipop are official? yes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If the firmware are official then why can't upgrade via On The Air (OTA) / automatic updates of device? not yet, because even though official however allocated for regional Malaysia, while Indonesia or other countries untill the author post this article currently there is no clarity when it will be given, only the sweet promises from the LG. CAUTION: now you can upgrade to Lollipoop via On The Air (OTA).
Is the manual upgrade as way below will shorten the life of our device ? Nope, there is no relation.
Is the manual upgrade as this will void the warranty ? of course, but do not worry just flash again to Kitkat then it will go back again to a virgin state.
Is the upgrade Indonesian Firmware must be via On The Air (OTA)? nope, you can flash it, and the link of Indonesian firmware is in the under point A. UPGRADE PREPARATION.
B. SPECIFIC QUESTIONS
Is using the firmware will be a significant improvement ? not entirely .
Is 3g signal is more stronger ? the author use “tri” and “simpati” cards. The signal of tri in kitkat for Bekasi (west java, Indonesia) area’s only 1-2 strips, but in lollipop at least 2 strips and 4 strips at maximum. While simpati in kitkat and lollipop both 5 strips.
If we use the Antutu Benchmark then what is the score? If the Kitkat ranging from 17,000 to 18,000 so if Lollipop minimal ranging from 19370-20447.
Does performance increased? I feel it is a litte bit increase.
Is the battery getting longer ? a little bit different with kitkat, it depends on usage.
Is interface (user interface ) to change ? not significant, may be only in screen lock, recent, navigation key, which changed to the style of Lollipop .
It will support USB On The Go ( OTG ) ? no, not yet.
Does the RAM increased ? nope, there is no change, but multitasking becomes better if the entire animations in our device turned off.
Does it affect internal memory becomes more space ? nope, even on the contrary, the Kitkat internal memory which is used for sytem amount 3.7GB but at Lollipop reach 4.21GB.
Is there an Indonesian language option ? Yeup, even the choice of languages becomes more choice.
Does using Indonesian regional firmware for non Indonesian regional will impact influence on the received signal ? i think it doesn't.
Does rooting the device must be? Nope, doesn't.
Does unroot the device must be? Nope, doesn't.
Would the device can be rooted ? Yes, only one methode for now, use king root version 4.0 : www.kingroot.net
Is this upgrade will delete internal memory ? yes, it will. Than backup first please.
Is this upgrade will delete external memory ? nope.
How lerge is the size of the firmware in a KDZ ? 893MB.
Is the pixel density will increase ? nope.
There Is bugs on Lollipop ? Yeup, GPS not working properly and there is no solution yet..
Is the result of photo more better ? a little bit increase about 5-10 %, a better result when the light is less when we using the kitkat with a flash lamp then the result becomes chaotic, ugly saturation, blur. But now it is litle bit better.
Compare the photo above is taken from the stock camera of LG G3 Stylus Kitkat when the light level is very lacking at 08:00 pm ; the left does taken using blits (flash lamp) while the right photo does not use blits.
Now compare the photos below was taken at 10:00pm with stock camera of LG G3 Stylus lollipop in the same condition; with a worse light at 10.00 pm, the left does taken using blits (flash lamp) while the right photo does not use flash lamp.
Does the input / output sound more better ? no changes.
The other Applcations does not change....
etc
TUTORIAL UPGRADE / UPDATE SOFTWARE
A. UPGRADE PREPARATION
The LG Driver must be installed, download here.
Download flashing tools here.
Download the Lolipop firmware, Malaysian Regional here or here and put it on the same folder with flashing tools.
Or download the Lollipop Indonesian Firmware : here and put it on the same folder with flashing tools.
B. HOW TO UPGRADE
Turn off the device.
Go into Download Mode/Firmware Update press volume up and plug the usb cable immediately.
Choose CSE mode not Normal Mode.
Than flash it with lollipop firmware that you've downloaded.
For those of you who are confused how to flash please look at this link or this for the Facebook Group and this for you an Indonesian.
Still Confused? look at this video on youtube.
Done, the device will reboot twice. Do not affraid it's normal.
Congratulation for you... do not forget Your Thumb please.
Please write the source when you copying to other blogs etc.
Thanks for Reading my Article.
Great!
Finally we have Lollipop! I've did this 2 days ago and the phone works perfect although i'm from Chile and the indonesian firmware runs correctly so
I only hope that some developer can find the way to enable recovery
Is not possible to root the phone yet?
works great on LG D693n
I have the single SIM model (D693n) from Mexico and the performance is very good, to me it seems to drain quicker the battery lollipop
---------- Post added at 02:29 AM ---------- Previous post was at 02:27 AM ----------
I have the single SIM model (D693n) from Mexico and the performance is very good, to me it seems to drain quicker the battery lollipop, just flashed yesterday
themonja said:
Finally we have Lollipop! I've did this 2 days ago and the phone works perfect although i'm from Chile and the indonesian firmware runs correctly so
I only hope that some developer can find the way to enable recovery
Is not possible to root the phone yet?
Click to expand...
Click to collapse
I've try many way to root it, but always fail. :crying: I hope some developer can find how to root it and to enable a custom recovery.
Your thumb please...
mckarty said:
I have the single SIM model (D693n) from Mexico and the performance is very good, to me it seems to drain quicker the battery lollipop
---------- Post added at 02:29 AM ---------- Previous post was at 02:27 AM ----------
I have the single SIM model (D693n) from Mexico and the performance is very good, to me it seems to drain quicker the battery lollipop, just flashed yesterday
Click to expand...
Click to collapse
callibrate it first and than judge it.
thumb please :good:
themonja said:
Finally we have Lollipop! I've did this 2 days ago and the phone works perfect although i'm from Chile and the indonesian firmware runs correctly so
I only hope that some developer can find the way to enable recovery
Is not possible to root the phone yet?
Click to expand...
Click to collapse
Now is possible to root the lollipop, use king root version 4.0 : www.kingroot.net
Thanks for your helpful information.
My GPS is not working after I update to Android Lollipop! Is it only with me or it's happening with someone else? What can I do?
Thanks!
Does this works with a G3 Stylus model D693 ?
Just to answer my own question, I flashed the ROM and is working perfect.
themonja said:
Finally we have Lollipop! I've did this 2 days ago and the phone works perfect although i'm from Chile and the indonesian firmware runs correctly so
I only hope that some developer can find the way to enable recovery
Is not possible to root the phone yet?
Click to expand...
Click to collapse
renatobring said:
My GPS is not working after I update to Android Lollipop! Is it only with me or it's happening with someone else? What can I do?
Thanks!
Click to expand...
Click to collapse
Yeup, GPS not working properly and there is no solution yet.
It's working! but we can't use xposed because no custom recovery ;_;
evertonjcorreia said:
It's working! but we can't use xposed because no custom recovery ;_;
Click to expand...
Click to collapse
xpossed for lollipop has realesed but must flashing from cwm. The problem is we have no cwm yet.
thumb please...
Do we have a solution for the GPS on Lollipop yet? Will LG update this firmware?
Thanku very very much
Sent from my LG-D690 using XDA Free mobile app
thanks worked on my g3 stylus (d690n) gives the same error above and my gps works.
anyone sucessfully rooted it?
lg one click root failed for me :'(
Hxnter said:
I was with the Kingroot (the link is on the own post), then I flashed the rom again and it's not working anymore. Funny.
I got root with iRoot too, but even the own iRoot apps couldn't got root permissions, which means it couldn't gave permissions to any other app too.
I guess that even if you get, you won't be able to update the su binaries easily, so you will have to get used with the Chinese apps.
Gps is working fine to me either, seems even faster than before.
Click to expand...
Click to collapse
iroot worked fine after the 3rd try
the only thing remaining is the custom recovery to install xposed
i dont know, i was just about to try
---------- Post added at 01:43 PM ---------- Previous post was at 01:08 PM ----------
now i've noticed that i lost the nfc funcion of my device. i think this was the n from d690n.
anyone knows how to add it back?
apriansyahbintang said:
Yeup, GPS not working properly and there is no solution yet.
Click to expand...
Click to collapse
My GPS works Great after update to Lollipop, and i have root in my device. Greetings from México.
There is already TWRP OR CWM for LG stylus g3 D690 5.0.2?!
Do you have the LG D393n?
Do you have the LG D393n?
---------- Post added at 02:24 PM ---------- Previous post was at 02:21 PM ----------
Dargod92 said:
My GPS works Great after update to Lollipop, and i have root in my device. Greetings from México.
Click to expand...
Click to collapse
Do you have the LG D693n ?
AICP Oreo.
................ Old stuff below................
AICP
- also known as Ice Cold Project - is based on LineageOS 14.1, but with a few features added.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install as any other ROM
Below guide is inspired from this CM13 post.
Unlock the Bootloader (Fastboot Mode = Vol. Up + Power)(Command: fastboot oem unlock)
* Flash a custom recovery (Command: fastboot flash recovery name.recovery.img)
Download AICP ROM and Open GApps (ARM64/7.1) and copy to the phone
Reboot to Recovery (Vol. Down + Power)
Do a Full Wipe (will delete everythings so make a copy of your file to the microSD card)
Flash AICP ROM
Flash GApps
Reboot the phone and wait (the first time will take a bit of time)
* Using twrp 3.0.2-0, there will be 2 red error lines when flashing - just ignore.
Credits:
LineageOS for making R7Plus ready for custom ROMs.
The team behind AICP.
omnirom, SlimRoms & probably more.
Source code
AICP
Device source and build guide.
Have fun!
Very nice to see the R7 Plus get custom ROMS ! Thanks !
rch.aj34 said:
Very nice to see the R7 Plus get custom ROMS ! Thanks !
Click to expand...
Click to collapse
Very nice
---------- Post added at 01:58 AM ---------- Previous post was at 01:56 AM ----------
Very nice:good::good::good:GoodGuide
can not install this rom... wipe-> install from internal or external storage-> twrp display out and no install
pixelfreak
-pixelfreak- said:
can not install this rom... wipe-> install from internal or external storage-> twrp display out and no install
pixelfreak
Click to expand...
Click to collapse
What device?
What recovery?
What was installed previously?
Works perfectly, keep going :victory:
re
teemo said:
What device?
What recovery?
What was installed previously?
Click to expand...
Click to collapse
Oppo R7Plusf... root...Twrp from raymanfx.. first custom flash is with CM13 and BaNks gapps...
CM13 make no install proplems.....
nice to see other devs work for this device
Pixelfreak
-pixelfreak- said:
Oppo R7Plusf... root...Twrp from raymanfx.. first custom flash is with CM13 and BaNks gapps...
CM13 make no install proplems.....
nice to see other devs work for this device
Pixelfreak
Click to expand...
Click to collapse
Looks good to me, even though I don't know the recovery. It should work, since it works for CM13.
However, you can try with the official twrp. That's the one I link to from OP.
guys.,. anyone had time to try it?
on CM13 i'm experiecing problems with AUTO ROTATE screen.. is becoming a bit annoying !
I'd like to know if anyone experienced this problem with this rom, hopefully i'll have time to test it myself in the next days !
thanks
simika said:
guys.,. anyone had time to try it?
on CM13 i'm experiecing problems with AUTO ROTATE screen.. is becoming a bit annoying !
I'd like to know if anyone experienced this problem with this rom, hopefully i'll have time to test it myself in the next days !
thanks
Click to expand...
Click to collapse
@Osleg reported rotating issue in the CM thread. I had it once on this ROM as well.
I was messing with stuff in "Developer options" and at a point the rotation totally broke. I wasn't able to revert the setting, so I flashed the ROM again and have not had the problem again.
I suspect the "Multi window mode" broke it, but it could be other things like a bad behaving theme.
Could you think of any specific changes you have made previous to your broken rotation ?
Aside from that, the build has been stable for me since 22. Feb.
teemo said:
@Osleg reported rotating issue in the CM thread. I had it once on this ROM as well.
I was messing with stuff in "Developer options" and at a point the rotation totally broke. I wasn't able to revert the setting, so I flashed the ROM again and have not had the problem again.
I suspect the "Multi window mode" broke it, but it could be other things like a bad behaving theme.
Could you think of any specific changes you have made previous to your broken rotation ?
Aside from that, the build has been stable for me since 22. Feb.
Click to expand...
Click to collapse
I didn't make any significant change in &"developer" section and for sure I didn't touch the multi window thing.. yesterday I installed the new nightly but I still have same issue.. did you activate again developers mode?
Sent from my R7plusf using Tapatalk
simika said:
I didn't make any significant change in &"developer" section and for sure I didn't touch the multi window thing.. yesterday I installed the new nightly but I still have same issue.. did you activate again developers mode?
Sent from my R7plusf using Tapatalk
Click to expand...
Click to collapse
Thanks. There may be something here on CMs Gerrit. We are not alone. Im thinking our v3.10 kernel or the vendor blobs are not yet able to cope 100% with MM and need some workarounds.
It will be fixed.
Installed and loving it, great rom compliments to the dev.
Is it possible to move apps to micro sad card if so how or if not is it on th to do list.
Cheers.
Fantastic and very fast ROM
question 1st. which is the theme OP is displaying
2nd. how to remove google bar from the screen?
2007jchill said:
Installed and loving it, great rom compliments to the dev.
Is it possible to move apps to micro sad card if so how or if not is it on th to do list.
Cheers.
Click to expand...
Click to collapse
Thanks.
I don't know about moving apps yet. But you should be able to format the sdcard as ext4 and use it as internal data. I think you get the option to chose the first time you mount the sdcard. I'm sure there is a guide somewhere
jacktackle said:
Fantastic and very fast ROM
question 1st. which is the theme OP is displaying
2nd. how to remove google bar from the screen?
Click to expand...
Click to collapse
1. DarkSideOrange theme. One of many variants: http://youtu.be/l5wuc7bKO-o
2. Long press an empty area of the screen, chose settings. Disable search bar.
This rom is only getting better and better.
Latest build outstanding.
Cheers
Ok 6.x.x Google camera video mode force closes. But the 5.x.x.x version works perfectly. Appreciate it if you have any ideas.
Cheers
2007jchill said:
This rom is only getting better and better.
Latest build outstanding.
Cheers
Click to expand...
Click to collapse
Thanks. There are some improvements in next build, like fixing clock settings fc.
2007jchill said:
Ok 6.x.x Google camera video mode force closes. But the 5.x.x.x version works perfectly. Appreciate it if you have any ideas.
Cheers
Click to expand...
Click to collapse
I can't even find the Google cam, do you have a link to the app. Or do you mean build in camera?
teemo said:
Thanks. There are some improvements in next build, like fixing clock settings fc.
I can't even find the Google cam, do you have a link to the app. Or do you mean build in camera?
Click to expand...
Click to collapse
Just got the latest from apkmirror once installed it shows in play store then when you uninstall on play store you get the option to install the 5.x.x version which works fine. I think the 6.x.x version is for the nexus at the moment.
AOKP (Android Open Kang Project)
7.? Nougat for All Motorola "Quark" Devices (XT1225 | XT1250 | XT1254)
With Substratum/OMS Themes
KNO'DIS: I, OR ANYONE ELSE AT XDA, WILL NOT BE HELD RESPONSIBLE FOR "BRICKING" YOUR PHONE!! IF YOU MANAGE TO MAKE A BRICK, DUE TO YOUR "FUN-DA-MENTAL" INABILITY TO READ, GO BUILD A BBQ PIT WITH IT!! (Or ask for help, there's a lot of friendly people around here)
This is for the AOKP fans out there that are using the Motorola Quark, which includes: DROID Turbo, Moto MAXX and Turbo Maxx. It's stable, I use it daily, however it's still under development, see post #2 ("Extra Info") for additional information.
Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation
Clean Install Recommend:
Use TWRP for a Full Backup
Wipe/Factory Reset
Flash ROM.zip + GApps
Clear Cache/Dalvik
Reboot
Upgrading
Use TWRP to Backup Data Only
Wipe/Factory Reset
Flash ROM.zip + GApps
Clear Cache/Dalvik
Reboot
Setup Phone
Reboot Recovery
Restore Data Backup
Download
Current Release
Open GApps 7.? (I used Pico)
Credits
Development:
@bhb27
ROM Testers:
@eddiemc12
@hpbrasil
@kitcostantino
@Nitefire77
@Shiftydogit
And, I've recently added more (PM me if you want your name here)
Sources
Source Code: AOKP
Device Tree: Motorola Quark
Kernel: BHB27 Stock Kernel
Extra Info
Most "bugs" have been fixed. IF you find one, feel free to share on this thread :good:
PLEASE, PLEASE:
Do a "clean install" before reporting issues, you may also want to clean your modem first using this:
Download Zip
(Flash using TWRP)
Kang 2
Great.
Is it using bhb27 kernel or you modified something in it?
Very nice, thanks @NepoRood
Debuffer said:
Great.
Is it using bhb27 kernel or you modified something in it?
Click to expand...
Click to collapse
Using bhb's stock CM14 kernel, it's running great. I'll be adding more information to the first 3 posts as time goes on :good:
NepoRood said:
Using bhb's stock CM14 kernel, it's running great. I'll be adding more information to the first 3 posts as time goes on :good:
Click to expand...
Click to collapse
But is it using Bhb kernel 1.0?
Or you changed something and it's your 1.0 version?
ROM was running great. Been running it a couple days without hassle
Nitefire77 said:
ROM was running great. Been running it a couple days without hassle
Click to expand...
Click to collapse
same here ,smooth and fast with no reboots.
For those who has problems installing because of com.android.phone has stopped
First fresh install
Reboot
It'll problem
Reboot in recovery
Dirty install the rom again (without any configuration done in the first boot)
Reboot
Worked for me.
@NepoRood can you please add caffeine tile in next update? And maybe zzmoove gov? I know its just the first build, but this additions would be really loved. Thank you for such a good job.
Link to kernel not working. Could you please confirm
janine13 said:
Link to kernel not working. Could you please confirm
Click to expand...
Click to collapse
It's a typo, my bad. You know that is the source code, right?
@Debuffer, personally, I have no use for all the "extra" functionality of a custom kernel. After the holidays, I'll look into providing a custom kernel along with the stock one (like bhb does with RR). Just out of curiosity, did you install the Kernel Auditor app?
NepoRood said:
@Debuffer, personally, I have no use for all the "extra" functionality of a custom kernel. After the holidays, I'll look into providing a custom kernel along with the stock one (like bhb does with RR). Just out of curiosity, did you install the Kernel Auditor app?
Click to expand...
Click to collapse
Yeah. I use Bhb kernel since 5.1.
Thank you for this.
NepoRood said:
It's a typo, my bad. You know that is the source code, right?
Click to expand...
Click to collapse
Yeah, I got that part after I went to the site. I was looking for the kernel in a bid to try using it with the ROM. I have been using the ROM for the past 3 hours now and all seems smooth and stable so far. I will keep running it and see, if it stays this way I just may have a new daily driver
Great rom, it runs very well. Only issue with it, is that the torch using gestures is very inconsistent. Similar to what happened when 6.0 roms first came out. It either takes 30 seconds to activate, or never works at all.
Also, the setting to control media volume by default doesn't work. This is the same on cm14.1, so imagine it's not something you can easily change in the rom.
Users with GPS problem only make the flash of this file that will be solved.
https://www.androidfilehost.com/?fid=24531035584725320
Please add publication. @NepoRood
Very good rom.stable and smoot.but there is little laggy for camera conect in many apk.more of it happens for front camera
Sent from my DROID Turbo using Tapatalk
great rom, liked it alot, clean installed it without any phone stop errors, bhb27's auditor n govtuner works perfectly aswell
only one issue i have was when i take photos im not able to share them online for some reason (example via watsapp or facebook) it always shows "sharing failed please try again" msg. dont know what happened there i tried re-installing watsapp and also a different camera app but still get the same error.
reverted back to 6.1 for now as i really need photo share as my work is depended on it, although i did notice the pictures i took on 7.1 now in the gallery were corrupt n un-viewable aswell ? was there something i did wrong? should i try flashing again?
Pakman300 said:
great rom, liked it alot, clean installed it without any phone stop errors, bhb27's auditor n govtuner works perfectly aswell
only one issue i have was when i take photos im not able to share them online for some reason (example via watsapp or facebook) it always shows "sharing failed please try again" msg. dont know what happened there i tried re-installing watsapp and also a different camera app but still get the same error.
reverted back to 6.1 for now as i really need photo share as my work is depended on it, although i did notice the pictures i took on 7.1 now in the gallery were corrupt n un-viewable aswell ? was there something i did wrong? should i try flashing again?
Click to expand...
Click to collapse
There are 2 folders where pictures are stored: DCIM and Pictures
Using the built in file explorer (or a PC), rename each of these. I did DCIM2 and Pictures2, then use your phone to take a picture. Both folders will be recreated. Then, drag and drop everything from the #2 folder into the corresponding "New" folder.
Hassle? Just a bit, but we did just change branches on our android phones :laugh:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I present to you, LineageOS for the X2 . Lineage is one of the premier custom ROMS for Android with many extra features and customizations. This build was ported by myself using bits and pieces from a few separate unofficial builds for different Huawei devices. I did some Framework edits to add/remove features. I hope you enjoy the rom and please hit the thanks button if you like what I've done. Thanks to all who have donated, it's never required but much appreciated and thank you to @Djiban for providing me with an X2 to keep the developing going and to @audioralf for all the testing and bug findings on all of my roms and everyone else for your help. I am not responsible for bricked devices, dead SD Cards or if your phone melts and burns in your hand
Thanks to spiritx & T1mb3 for the original builds.
Features
AdAway
Kernel Adiutor
Footej Camera
Init.d Support
Permissive SeLinux
Pre-Rooted w/Magisk
Xposed Compatible
Instructions
You must already be on Android 6.0 (B2xx) to flash this rom
Boot into TWRP
Do a backup
Wipe and flash ROM
That's it, you're done!
First boot will take a few minutes, please be patient.
Bugs
LED notification light works but stays solid
Only one sim is supported
Signal icon always shows one bar
Battery drains a little faster than stock EMUI
Read the Changelogs for information
Download
https://androidfilehost.com/?fid=5862345805528050336
Gapps
http://opengapps.org/
Changelogs
3-5-18: Beta 1
7-17-18: Beta 2
-Fixed Mobile Data
-Removed FM Radio
-Removed Camera & Gallery for now as they don't and may never work due to no custom Kernel for Nougat
Reserved
Download link shows "KangVIP Slim B212v4 Xposed "
goon-heaven said:
Download link shows "KangVIP Slim B212v4 Xposed "
Click to expand...
Click to collapse
Sorry, i just fixed that. If you go to androidfilehost.com and search my username you can always see all of my files even if they aren't posted on here yet.
Thanks. I just tried searching for ajsmsg78 at androidfilehost.com, and it only showed 8 TWRP zips. Any ideas?
goon-heaven said:
Thanks. I just tried searching for ajsmsg78 at androidfilehost.com, and it only showed 8 TWRP zips. Any ideas?
Click to expand...
Click to collapse
https://androidfilehost.com/?w=profile&uid=24269982086988507
My supported devices is on the right. The X2 is under Generic Device/Other.
Wipe and flash ROM
Click to expand...
Click to collapse
in general wich WIPE do you recommand (depending on which kind you are coming from) ?
thanks
Djiban said:
in general wich WIPE do you recommand (depending on which kind you are coming from) ?
thanks
Click to expand...
Click to collapse
If you're coming from any rom other than this one wipe data/system/caches
ajsmsg78 said:
If you're coming from any rom other than this one wipe data/system/caches
Click to expand...
Click to collapse
Thank you very much, AJ
Is there a GAPPS suggested?
Pico ok??
mouse723 said:
Thank you very much, AJ
Is there a GAPPS suggested?
Pico ok??
Click to expand...
Click to collapse
Open gapps, whichever you want, just make sure it's 6.0 that you're downloading.
New life!
Thanks ajsmsg78! ROM working good so far! Push working great! GPS... I'll let you know in a few days! Battery seems to drain a little faster. Not a big deal here... No double tap to wake options? Don't really need it... Phone is very stable!
Steamer2499 said:
Thanks ajsmsg78! ROM working good so far! Push working great! GPS... I'll let you know in a few days! Battery seems to drain a little faster. Not a big deal here... No double tap to wake options? Don't really need it... Phone is very stable!
Click to expand...
Click to collapse
I couldn't get dt2w working so I removed it from the framework. It's something with the kernel and that's where my extreme lack of kernel knowledge shows
There are actually a few apps in the play store where you can use the proximity sensor to wake the phone (wave your hand over the sensor to unlock) but dt2w does consume more battery.
Xposed installed and working here. Thank you for great ROM!
ajsmsg78 said:
I present to you, LineageOS for the X2 . Lineage is one of the premier custom ROMS for Android with many extra features and customizations. This build was ported by myself using bits and pieces from a few separate unofficial builds for different Huawei devices (Piaooops X2 build, the build for the P8 and Honor 7). I did some editing of the framework to add/remove features. I hope you enjoy the rom and please hit the thanks button if you like what I've done. Thanks to all who have donated, it's never required but much appreciated and thank you to @Djiban for providing me with an X2 to keep the developing going and to @audioralf for all the testing and bug findings on all of my roms and everyone else for your help. I am not responsible for bricked devices, dead SD Cards or if your phone melts and burns in your hand
Features
AdAway
Kernel Adiutor
Footej Camera
Init.d Support
Permissive SeLinux
Pre-Rooted w/Magisk
Xposed Compatible
Instructions
You must already be on Android 6.0 (B2xx) to flash this rom
Boot into TWRP
Do a backup
Wipe and flash ROM
That's it, you're done!
First boot will take a few minutes, please be patient.
Bugs
You tell me
Read the Changelogs for information
Download
https://www.androidfilehost.com/?fid=962187416754465742
Gapps
http://opengapps.org/
Changelogs
3-5-18: Initial build
Click to expand...
Click to collapse
Is it possible to dirty flash over cyanogenmod by gagua?
I think about my wifes phone to flash.
Thy, Ray
ajsmsg78 said:
I couldn't get dt2w working so I removed it from the framework. It's something with the kernel and that's where my extreme lack of kernel knowledge shows
There are actually a few apps in the play store where you can use the proximity sensor to wake the phone (wave your hand over the sensor to unlock) but dt2w does consume more battery.
Click to expand...
Click to collapse
Notification led doesn't blink but does stays on...
Hi! And why one SIM card?
goon-heaven said:
Xposed installed and working here. Thank you for great ROM!
Click to expand...
Click to collapse
which version of xposed did you install? I tried version 89 and didn't get it to work.
Thanks in advance
Wolfgang
version 89_sdk23_arm64 using installer 3.1.5
what exactly did not work?
goon-heaven said:
version 89_sdk23_arm64 using installer 3.1.5
what exactly did not work?
Click to expand...
Click to collapse
thanks, that' what I used.
I got a message, that xposed couldn't be activated .
I'll give it another try.
Thanks - Wolfgang
Yes, I got that message too. Cant remember exactly what I did, I think I rebooted, and tried a couple of times, then it worked.
Hi guys, does anyone got a very high battery drain after update to OOS 10.3.0.
View attachment 4912651
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It seems ANDROID SYSTEM have huge battery drain...
I don't know why but downgrade to 10.0.2/10.0.3 until next version released..
brightmbsh said:
Hi guys, does anyone got a very high battery drain after update to OOS 10.3.0.
View attachment 4912651
View attachment 4912653
It seems ANDROID SYSTEM have huge battery drain...
I don't know why but downgrade to 10.0.2/10.0.3 until next version released..
Click to expand...
Click to collapse
Hello,
I, on the contrary, am having GREAT BATTERY LIFE on OOS 10.3.0.
Anyway, about your issue...
"Android System" is not actually a standalone APK or app. A lot of other apps are encompassed within "Android System" so, the high battery drain on "Android System" may actually be caused by another app. We couldn't tell by merely looking at the pictures you provided...if you really want to get serious about it, you can try installing some well-known battery monitor apps and then measure/identify which apps are really causing it (the high battery drain).
brightmbsh said:
Hi guys, does anyone got a very high battery drain after update to OOS 10.3.0.
View attachment 4912651
View attachment 4912653
It seems ANDROID SYSTEM have huge battery drain...
I don't know why but downgrade to 10.0.2/10.0.3 until next version released..
Click to expand...
Click to collapse
Have you try to do a wipe cache after the update? If no , test you have nothing to loose
topet2k12001 said:
Hello,
I, on the contrary, am having GREAT BATTERY LIFE on OOS 10.3.0.
Anyway, about your issue...
"Android System" is not actually a standalone APK or app. A lot of other apps are encompassed within "Android System" so, the high battery drain on "Android System" may actually be caused by another app. We couldn't tell by merely looking at the pictures you provided...if you really want to get serious about it, you can try installing some well-known battery monitor apps and then measure/identify which apps are really causing it (the high battery drain).
Click to expand...
Click to collapse
I've rolled back to 10.0.3, and everything is becoming ok.
I didn't make any change on 10.3.0, everything is just like the older 10.0.3, but got a very high battery drain on 10.3.0.
Which battery monitor app can find the most power-hungry app exactly?
c3drik 67 said:
Have you try to do a wipe cache after the update? If no , test you have nothing to loose
Click to expand...
Click to collapse
Certainly, i even use MsmDownloadTool reset my device, but useless...
Are you using a custom kernel? Flash this in magisk and report back
preference said:
Are you using a custom kernel? Flash this in magisk and report back
Click to expand...
Click to collapse
Yes, i'm using blu_spark_r67 kernel, but i'm in 10.0.3 now, can't test this temporarily.
I'll try it when i update to 10.3.x next time.
brightmbsh said:
Yes, i'm using blu_spark_r67 kernel, but i'm in 10.0.3 now, can't test this temporarily.
I'll try it when i update to 10.3.x next time.
Click to expand...
Click to collapse
I had the same issue and this zip definitely worked. I'm on the latest arter97 kernel and get amazing battery life.
preference said:
I had the same issue and this zip definitely worked. I'm on the latest arter97 kernel and get amazing battery life.
Click to expand...
Click to collapse
I found a new version of this magisk module, author says that this will be more effectively.
View attachment stop_oneplus_brain_service.zip
brightmbsh said:
I found a new version of this magisk module, author says that this will be more effectively.
Click to expand...
Click to collapse
Thanks for the heads up :good:
brightmbsh said:
I found a new version of this magisk module, author says that this will be more effectively.
Click to expand...
Click to collapse
It seems like 10.3.0 definitely has a battery issue. (at least,in my case). Before I revert, what exactly does this module do?
Chance Ill said:
It seems like 10.3.0 definitely has a battery issue. (at least,in my case). Before I revert, what exactly does this module do?
Click to expand...
Click to collapse
Stops a service that's running wild and causing drain
preference said:
I had the same issue and this zip definitely worked. I'm on the latest arter97 kernel and get amazing battery life.
Click to expand...
Click to collapse
The latest version of arter kernel (r50b1) even doesn't need that module anymore as it fixes the OP issues.
on the contrary I've been getting great battery life on 10.3.0, make sure you do a clean stock flash with no custom kernel
I was on 10.0.2. Downloaded 10.3 and upgraded without any data loss.
Initially faced battery drain but then wiped cache and now all good.
hmm i also noticed this but for me telegram takes the battery drain as per battery statics
tried restricting app also not helping i used servicely app to stop the service still its running in background for some time
preference said:
Are you using a custom kernel? Flash this in magisk and report back
Click to expand...
Click to collapse
brightmbsh said:
Yes, i'm using blu_spark_r67 kernel, but i'm in 10.0.3 now, can't test this temporarily.
I'll try it when i update to 10.3.x next time.
Click to expand...
Click to collapse
As noted, this is an issue with the OnePlus stock kernel on international build after you flash a custom kernel.
Install that module it will kill the process after reboot. 10.3.0 issue only with custom kernels. As you noted 10.0.3 fine with a custom.
But you will then get annoying 10.3 upgrades notices next. I might go back to 10.3 and leave it stock the kernel. Some kernel Devs said they might not do builds anymore for international builds due to OnePlus and what they are doing with the kernel build on those causing issues like this.
This should be a sticky thread because once Devs feel they can't support a specific device...then people should be aware of this. Now it seems that they don't want to deal with the most popular build, international version for kernels.
At this rate, might as well just get a S11 when it comes out and bail on OnePlus...haha
brightmbsh said:
I found a new version of this magisk module, author says that this will be more effectively.
View attachment 4912955
Click to expand...
Click to collapse
What is the source of the stop_oneplus_brain_service.zip? Is there a support or release page?
dizM0nkey said:
What is the source of the stop_oneplus_brain_service.zip? Is there a support or release page?
Click to expand...
Click to collapse
NO, the module is come from a China custom kernel developer, he post this message in a Chinese forum which must download it's app and sign up an ID.
The link below is a preview version, you must use the coolapk app if you want to look over the comment or the author's other posts.
https://www.coolapk.com/feed/15465324?shareKey=ZmFjNGE2MjhjZjdiNWUwN2UwMTk~
preference said:
Are you using a custom kernel? Flash this in magisk and report back
Click to expand...
Click to collapse
Hello,
What's this ?