[ROM] AICP Oreo Edition 13.1 [Unofficial] R7 Plusf (Qualcomm) - Oppo R7 Plus

AICP Oreo.
................ Old stuff below................
AICP
- also known as Ice Cold Project - is based on LineageOS 14.1, but with a few features added.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install as any other ROM
Below guide is inspired from this CM13 post.
Unlock the Bootloader (Fastboot Mode = Vol. Up + Power)(Command: fastboot oem unlock)
* Flash a custom recovery (Command: fastboot flash recovery name.recovery.img)
Download AICP ROM and Open GApps (ARM64/7.1) and copy to the phone
Reboot to Recovery (Vol. Down + Power)
Do a Full Wipe (will delete everythings so make a copy of your file to the microSD card)
Flash AICP ROM
Flash GApps
Reboot the phone and wait (the first time will take a bit of time)
* Using twrp 3.0.2-0, there will be 2 red error lines when flashing - just ignore.
Credits:
LineageOS for making R7Plus ready for custom ROMs.
The team behind AICP.
omnirom, SlimRoms & probably more.
Source code
AICP
Device source and build guide.
Have fun!​

Very nice to see the R7 Plus get custom ROMS ! Thanks !

rch.aj34 said:
Very nice to see the R7 Plus get custom ROMS ! Thanks !
Click to expand...
Click to collapse
Very nice
---------- Post added at 01:58 AM ---------- Previous post was at 01:56 AM ----------
Very nice:good::good::good:GoodGuide

can not install this rom... wipe-> install from internal or external storage-> twrp display out and no install
pixelfreak

-pixelfreak- said:
can not install this rom... wipe-> install from internal or external storage-> twrp display out and no install
pixelfreak
Click to expand...
Click to collapse
What device?
What recovery?
What was installed previously?

Works perfectly, keep going :victory:

re
teemo said:
What device?
What recovery?
What was installed previously?
Click to expand...
Click to collapse
Oppo R7Plusf... root...Twrp from raymanfx.. first custom flash is with CM13 and BaNks gapps...
CM13 make no install proplems.....
nice to see other devs work for this device
Pixelfreak

-pixelfreak- said:
Oppo R7Plusf... root...Twrp from raymanfx.. first custom flash is with CM13 and BaNks gapps...
CM13 make no install proplems.....
nice to see other devs work for this device
Pixelfreak
Click to expand...
Click to collapse
Looks good to me, even though I don't know the recovery. It should work, since it works for CM13.
However, you can try with the official twrp. That's the one I link to from OP.

guys.,. anyone had time to try it?
on CM13 i'm experiecing problems with AUTO ROTATE screen.. is becoming a bit annoying !
I'd like to know if anyone experienced this problem with this rom, hopefully i'll have time to test it myself in the next days !
thanks

simika said:
guys.,. anyone had time to try it?
on CM13 i'm experiecing problems with AUTO ROTATE screen.. is becoming a bit annoying !
I'd like to know if anyone experienced this problem with this rom, hopefully i'll have time to test it myself in the next days !
thanks
Click to expand...
Click to collapse
@Osleg reported rotating issue in the CM thread. I had it once on this ROM as well.
I was messing with stuff in "Developer options" and at a point the rotation totally broke. I wasn't able to revert the setting, so I flashed the ROM again and have not had the problem again.
I suspect the "Multi window mode" broke it, but it could be other things like a bad behaving theme.
Could you think of any specific changes you have made previous to your broken rotation ?
Aside from that, the build has been stable for me since 22. Feb.

teemo said:
@Osleg reported rotating issue in the CM thread. I had it once on this ROM as well.
I was messing with stuff in "Developer options" and at a point the rotation totally broke. I wasn't able to revert the setting, so I flashed the ROM again and have not had the problem again.
I suspect the "Multi window mode" broke it, but it could be other things like a bad behaving theme.
Could you think of any specific changes you have made previous to your broken rotation ?
Aside from that, the build has been stable for me since 22. Feb.
Click to expand...
Click to collapse
I didn't make any significant change in &"developer" section and for sure I didn't touch the multi window thing.. yesterday I installed the new nightly but I still have same issue.. did you activate again developers mode?
Sent from my R7plusf using Tapatalk

simika said:
I didn't make any significant change in &"developer" section and for sure I didn't touch the multi window thing.. yesterday I installed the new nightly but I still have same issue.. did you activate again developers mode?
Sent from my R7plusf using Tapatalk
Click to expand...
Click to collapse
Thanks. There may be something here on CMs Gerrit. We are not alone. Im thinking our v3.10 kernel or the vendor blobs are not yet able to cope 100% with MM and need some workarounds.
It will be fixed.

Installed and loving it, great rom compliments to the dev.
Is it possible to move apps to micro sad card if so how or if not is it on th to do list.
Cheers.

Fantastic and very fast ROM
question 1st. which is the theme OP is displaying
2nd. how to remove google bar from the screen?

2007jchill said:
Installed and loving it, great rom compliments to the dev.
Is it possible to move apps to micro sad card if so how or if not is it on th to do list.
Cheers.
Click to expand...
Click to collapse
Thanks.
I don't know about moving apps yet. But you should be able to format the sdcard as ext4 and use it as internal data. I think you get the option to chose the first time you mount the sdcard. I'm sure there is a guide somewhere

jacktackle said:
Fantastic and very fast ROM
question 1st. which is the theme OP is displaying
2nd. how to remove google bar from the screen?
Click to expand...
Click to collapse
1. DarkSideOrange theme. One of many variants: http://youtu.be/l5wuc7bKO-o
2. Long press an empty area of the screen, chose settings. Disable search bar.

This rom is only getting better and better.
Latest build outstanding.
Cheers

Ok 6.x.x Google camera video mode force closes. But the 5.x.x.x version works perfectly. Appreciate it if you have any ideas.
Cheers

2007jchill said:
This rom is only getting better and better.
Latest build outstanding.
Cheers
Click to expand...
Click to collapse
Thanks. There are some improvements in next build, like fixing clock settings fc.
2007jchill said:
Ok 6.x.x Google camera video mode force closes. But the 5.x.x.x version works perfectly. Appreciate it if you have any ideas.
Cheers
Click to expand...
Click to collapse
I can't even find the Google cam, do you have a link to the app. Or do you mean build in camera?

teemo said:
Thanks. There are some improvements in next build, like fixing clock settings fc.
I can't even find the Google cam, do you have a link to the app. Or do you mean build in camera?
Click to expand...
Click to collapse
Just got the latest from apkmirror once installed it shows in play store then when you uninstall on play store you get the option to install the 5.x.x version which works fine. I think the 6.x.x version is for the nexus at the moment.

Related

[ROM][BleedMIUI R2.4][U8150][18/9/2012][UPLOADED]

Welcome to the port of MIUI gingerbread for huawei IDEOS u8150:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: this is a direct port of this rom:http://forum.xda-developers.com/showthread.php?t=1764018
the developer has put a lot of effort in bringing miui to ldpi phones. therefore, don't forget to thank him.:good:
before coming to information on the rom, firstly i would like to give credits to people who made this possible:
THANKS TO:
Cyanogenmod team
MIUI team
alanorth for his CM7.2 port
ahmadsafar for his wonderful work on miui resized framework and apks.
now lets get started:
FEATURES:
full MIUI gingerbread(2.4.20) experience
based on CM7.2(AUGUST 26)
MIUI APPS( gallery compass notes music etc.)
fully working with perfectly resized launcher and framework.
BUGS(MIUI SPECIFIC ONLY i.e excluding bugs in cm7.2)
1.haptic feedback doesn't work.
2.mobile data needs a workaround i.e install set DNS and set your DNS to google.
INSTALLATION: (use cwm 5.0.2.8/ 6.0.1.0)
1. download rom and place it in your sd card
2.make a nandroid of your phone for safety
3.boot into recovery cwm
4.wipe data/factory reset
5.wipe cache.
6.choose zip and flash this rom
7. reboot and enjoy miui
To make themes and icon bigger like MIUI, create "theme" folder at /data/system! this is a must!!
DOWNLOADS:
RELEASE 2.4(B)-DOWNLOAD
BOOT FIX-DOWNLOAD
RELEASE 2.4 - DOWNLOAD
RELEASE 2.1 -DOWNLOAD
RELEASE 2- DOWNLOAD
RELEASE 1- DOWNLOAD (mirrors required)
MIUI LOCKER THEMES-(put these in sdcard/miui/themes):here
MIUI ICON THEME-(Having icons for exdialer and go sms) :coming soon
ENJOY GUYS! and don't forget to say thanks..
CHANGELOG:
RELEASE 2.4(B)
a) nothing changed regarding miui but changed base to cm7.2 by aorth (june 11) which should fix some issues.
if you are using the previous build and are satisfied, you don't need to flash this.
RELEASE 2.4
a) fixed sms/mms apps fc. (thanks to heathen)
b)added awesome miui camera app (fully functional).
c)incorporated extended settings in the rom settings,
d)added apps, youtube and updated to play store.
e)uses cm 7.2 official (august 26) as base.
RELEASE 2.1
a)uses cm 7.2 ( august 12)
b)added 4 way reboot.
c)added extended settings.
1.RELEASE 2
a)changed miui framework to latest from the port by ahmadsafar.
b)fixed auto-brightness.
c)fixed slow auto rotation.
d)fixed can't change lockscreen wallpaper.
e) fixed camera
f)fixed speed and stability(now comparable to cm 7.2)
and maybe many more...
g)uses cm7.2 (june 11)
2.RELEASE 1
a)initial port
b)miui gingerbread.
dialer is ok ? on my rom dialer is really slow at first
takisbeskos7 said:
dialer is ok ? on my rom dialer is really slow at first
Click to expand...
Click to collapse
yup it works perfectly..no lags in dialer, opens in 1 sec.
Hi,
Refer to beneath thread that Aorth update again CyanogenMod 7.2-RC3 :
http://forum.xda-developers.com/showthread.php?t=1456890
Could you refer CyanogenMod 7.2-RC3 to upgrade you miui-u8150 [2.3.7] as well ?
jackson0829 said:
Hi,
Refer to beneath thread that Aorth update again CyanogenMod 7.2-RC3 :
http://forum.xda-developers.com/showthread.php?t=1456890
Could you refer CyanogenMod 7.2-RC3 to upgrade you miui-u8150 [2.3.7] as well ?
Click to expand...
Click to collapse
sure, i am planning on doing that.
@TakisBeskos
does auto-brightness work on your rom? it does'nt work on mine. i am thinking that the problem is in framework-res.apk. if it is working, can you please upload the file thanks.
mitulvohra said:
@TakisBeskos
does auto-brightness work on your rom? it does'nt work on mine. i am thinking that the problem is in framework-res.apk. if it is working, can you please upload the file thanks.
Click to expand...
Click to collapse
how can i test it for sure ?
TakisBeskos said:
how can i test it for sure ?
Click to expand...
Click to collapse
go to settings>display>brightness> if there is a checkbox of auto brightness then its working.
mitulvohra said:
go to settings>display>brightness> if there is a checkbox of auto brightness then its working.
Click to expand...
Click to collapse
i 've enabled it , and it become brighter , but i have never used it , and i don't know how it changes the brightness
sorry man , now i read again that you write and noticed that according to you , auto brightness works on my rom . do you want me to upload something for you ? if yes which file/s ?
TakisBeskos said:
sorry man , now i read again that you write and noticed that according to you , auto brightness works on my rom . do you want me to upload something for you ? if yes which file/s ?
Click to expand...
Click to collapse
system>framework-res.apk
i think auto brightness is due to this file. thanks
mitulvohra said:
system>framework-res.apk
i think auto brightness is due to this file. thanks
Click to expand...
Click to collapse
here you are : https://www.dropbox.com/s/ofp3g963bcxgc1m/framework-res.apk
this is the one i use , i haven't make it . i took it from pasquile's miui rom
i don't know if that's the problem , but if you want something else , just tell me
---------- Post added at 07:12 AM ---------- Previous post was at 06:35 AM ----------
i don't know why dialer on my rom lags . it open normal but if i press any key , is hangs for about 2-3 secs , and then it's ok . i tried your framework and apps , but it did exactly the same
TakisBeskos said:
here you are : https://www.dropbox.com/s/ofp3g963bcxgc1m/framework-res.apk
[/COLOR]i don't know why dialer on my rom lags . it open normal but if i press any key , is hangs for about 2-3 secs , and then it's ok . i tried your framework and apps , but it did exactly the same
Click to expand...
Click to collapse
you can try to use v6 supercharger. it may help in keeping the dialer in memory. other than that i am too in the dark about this problem. but in my port the dialer opens quickly if its in memory and if not it takes like 2 secs. another option is to use excontacts app, its very much similar to miui dialer and in some case faster too.
mitulvohra said:
you can try to use v6 supercharger. it may help in keeping the dialer in memory. other than that i am too in the dark about this problem. but in my port the dialer opens quickly if its in memory and if not it takes like 2 secs. another option is to use excontacts app, its very much similar to miui dialer and in some case faster too.
Click to expand...
Click to collapse
in my rom it opens fast too , but if i try to dial a number , it freezes for a while and then you can press buttons normally
can you update this porting into CM7.2 Nightly 20120812?
itachilinux said:
can you update this porting into CM7.2 Nightly 20120812?
Click to expand...
Click to collapse
where this nightly is released? is it cm official? or alanorth's? though on cm thread it is not mentioned and on get.cm the latest verison is from 5/8?
mitulvohra said:
where this nightly is released? is it cm official? or alanorth's? though on cm thread it is not mentioned and on get.cm the latest verison is from 5/8?
Click to expand...
Click to collapse
here you are...
Installed on my device but not getting boot. It is getting stuck on boot
Sent from my U8150 using xda app-developers app
itachilinux said:
here you are...
Click to expand...
Click to collapse
working on it! expect a release today!
Installed on my device but not getting boot. It is getting stuck on boot
Click to expand...
Click to collapse
see the installation method on OP. you need to apply boot fix.

[ROM][P940][JB][4.2.2] CyanogenMod 10.1 for LG Prada 3.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the unofficial CyanogenMod 10.1 nightlies​
The releases will co-inside and the build start time is at 03:01 UTC every night and should be uploaded soon after. If at anytime the builds are not there, then there was a problem building the ROM, and we will have a look at it ASAP.
CyanogenMod 10.2 builds are available here: http://forum.xda-developers.com/showthread.php?p=47732474. The buildbot resources are beeing used for other projects and/or CM10.2 builds
Click to expand...
Click to collapse
These builds are compiled from the latest CyanogenMod repos and device repos on device, kernel and vendor files.
Furthermore these builds are multiDPI, i.e. you can run the rom at any dpi between 160 and 240 while maintaining hi-res assets.
Initial install
Make sure you are updated to stock LG ICS update (v20d) prior flashing the first time.
And remember to wipe data/cache
(These steps need only to be done once. Later updates can be just flashed over an existing installation without the need of a wipe)
And as always: I take no responsibility whatsoever for raging, screaming, crying, frustration, failing, confusion, etc.
You need to have a custom recovery installed in order to flash these builds;
e.g. http://forum.xda-developers.com/showthread.php?t=1859662
Download builds here
or via GooManager
Click to expand...
Click to collapse
Download Google Apps
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Changes
Upstream changes
Devicetree commits
Kernel commits
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Issues
Issuetracker
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Tip: If you want to have your density settings persist over updates and don't want to edit build.prop with every update, use local.prop.
create a file named local.prop in your /data root (i.e. /data/local.prop) with the following contents (overrides ro.sf.lcd_density in build.prop):
Code:
qemu.sf.lcd_density=160
Click to expand...
Click to collapse
Thanks/Credits
Click to expand...
Click to collapse
Won-Kyu Park - for his awesome work with all LG phones
Ricardo Cerqueira - for his work on the LG Star devices (mainly P990) and the P920. This made some of the porting a tad easier for me glancing at his changes.
cyanogen - For starting this great project
Google - This wouldn't have happened without the releases of Android from you
IRC channel
Click to expand...
Click to collapse
Visit us in #cyanogenmod-dev on freenode
reserved for future use
first reply :laugh:
i'd like to report that when you update from cm10 to cm10.1, a fully wipe is recommended by me
cm10.1 is stable enough for daily use, and hope it become more perfect :angel:
i'll keep to use and test cm10.1, cheers!
Thanks alot to milaq!
I will use until every HW work, but thank for your support
milaq said:
Works
Phone 2G/3G
Wifi
Camera
MTP and PTP
Mass Storage
Touch
EGL
Video Plyback
HW Acceleration
Sound
Headphones
Vibration
NFC
Bluetooth
Sensors
Autobrightness
GPS
Video Recording up to 720p
USB Tethering
Wifi Tethering
...
Doesn't work atm
Wifi Direct
HWC + MHL
1080p Video Recording
Click to expand...
Click to collapse
same as cm10?
Maybe it's just me, but somehow I'm missing the performance menu.
Additionly, the phone doesn't boot into recovery anymore. The circle revolves endless in the 'Restart Phone' screen.
But the good news is, that the echoing I suffered in CM 10 is almost gone or just minimal, so that's not annoying anymore.
rockambole said:
same as cm10?
Click to expand...
Click to collapse
seems so...
-=bhf=- said:
Maybe it's just me, but somehow I'm missing the performance menu.
Click to expand...
Click to collapse
got to unlock that first. wont tell you how to do it, find out yourself
-=bhf=- said:
Additionly, the phone doesn't boot into recovery anymore. The circle revolves endless in the 'Restart Phone' screen.
Click to expand...
Click to collapse
pressing the power button while in that state should help. dont know the cause atm
milaq said:
seems so...
got to unlock that first. wont tell you how to do it, find out yourself
Click to expand...
Click to collapse
Oh, for god sakes. To unlock the hidden menu wasn't even an effort needed on my side. :laugh:
Seriously, though, why was the performance menu hidden in the first place? Too many casualties on the way?
pressing the power button while in that state should help. dont know the cause atm
Click to expand...
Click to collapse
Yes, that did the trick. Thanks for the info.
Fantastic now using it.
Sent from my Prada 3.0 using xda premium
JB !!
Hi Milaq,
Thanks for your great job :good:
Please continue to your developing for LG PRADA 3.0 P940
My first ROM is 2.3.7 V10D and after that upgraded to V20D but now using V20G (VDI/VODAFONE(ITALY))
Can I Install 10.1 on my device?
Android version: 4.0.4
Baseband version: v20g-eur-xxx-aug-8-2012+0
Kernel version: 3.0.21
Build number: IMM76D
Hi milaq,
There are some errors that you need to fix.
1.) Mounting USB on Mass Storage is not working
su
setprop persist.sys.usb.config mass_storage
but then when connected to a computer, turning on USB Storage doesn't work?
2.) I have a third party screenshot app called Screenshot UX, I tried capturing my notification drawer but it appears he captured the PRADA logo at boot? and everything I captured also appears the PRADA Logo. :laugh:
3.) Status bar error? The upper left toggle to your Quick settings panel is missing, remove the AM/PM on clock and it turns OK.
excellent work.
but
1- I miss the black and white theme. do you have any apk or zip of the original prada theme and widgets ?
2- My touch sensitivity decreased.
3- My Antutu points decreased from 7866 (stock rom) to 7666
Thanks for the great work.
here are the few things I noticed and wish to be added:
- Seems that my phone is warms up or is warmer than using the CM10.0
- No option to save the Camera captures directly to SD card
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
You can DL a CM Theme in the play store: https://play.google.com/store/apps/details?id=org.cerqueira.theme.Outline
adempozhari said:
1- I miss the black and white theme. do you have any apk or zip of the original prada theme and widgets ?
Click to expand...
Click to collapse
hi milaq,
seems mass storage can not work(both in recovery & system), and there's a bug related to signal :
when i turn off flight mode, the singnal is zero, it seems that the phone can not re-search the singnal when return from flight mode, i need to restart the phone manually.
thanks!
Again may I add glitches and errors that I've encountered so far.
1st and 2nd Screenshot
Some video glitch perhaps or is it just my device?
3rd and 4th Screenshot
Tried clearing cache but still resets to 12KB? CM10 and CM9 zero out's cache.
Hello, the biggest problem for me is screen sensitivity which have decreased since cm10. I flashed back stock rom and the problem disappeared so i believe it's a software problem,I will stay with stock rom till there is a fix.Thanks again for this great rom
Sent from my LG-P880 using Tapatalk 2
kgian2007 said:
Hello, the biggest problem for me is screen sensitivity which have decreased since cm10. I flashed back stock rom and the problem disappeared so i believe it's a software problem,I will stay with stock rom till there is a fix.Thanks again for this great rom
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
After Flashed CM 9/10/10.1 , How to flash back to stock ROM? Is it possible?
If you want flash stock rom look here forum.xda-developers.com/showthread.php?t=1761779
Sent from my LG-P970 using Tapatalk 2
Phone warm up. Black screen and no response of hardware power , i have to remove battery.

[ROM][NOUGAT][QUARK][AOKP 7.?]DROID Turbo/Moto MAXX

AOKP (Android Open Kang Project)
7.? Nougat for All Motorola "Quark" Devices (XT1225 | XT1250 | XT1254)
With Substratum/OMS Themes​
KNO'DIS: I, OR ANYONE ELSE AT XDA, WILL NOT BE HELD RESPONSIBLE FOR "BRICKING" YOUR PHONE!! IF YOU MANAGE TO MAKE A BRICK, DUE TO YOUR "FUN-DA-MENTAL" INABILITY TO READ, GO BUILD A BBQ PIT WITH IT!!​ (Or ask for help, there's a lot of friendly people around here)​
This is for the AOKP fans out there that are using the Motorola Quark, which includes: DROID Turbo, Moto MAXX and Turbo Maxx. It's stable, I use it daily, however it's still under development, see post #2 ("Extra Info") for additional information.
Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation
Clean Install Recommend:
Use TWRP for a Full Backup
Wipe/Factory Reset
Flash ROM.zip + GApps
Clear Cache/Dalvik
Reboot
Upgrading
Use TWRP to Backup Data Only
Wipe/Factory Reset
Flash ROM.zip + GApps
Clear Cache/Dalvik
Reboot
Setup Phone
Reboot Recovery
Restore Data Backup
Download
Current Release
Open GApps 7.? (I used Pico)
Credits
Development:
@bhb27
ROM Testers:
@eddiemc12
@hpbrasil
@kitcostantino
@Nitefire77
@Shiftydogit
And, I've recently added more (PM me if you want your name here)
Sources
Source Code: AOKP
Device Tree: Motorola Quark
Kernel: BHB27 Stock Kernel
Extra Info
Most "bugs" have been fixed. IF you find one, feel free to share on this thread :good:
PLEASE, PLEASE:
Do a "clean install" before reporting issues, you may also want to clean your modem first using this:
Download Zip
(Flash using TWRP)
Kang 2
Great.
Is it using bhb27 kernel or you modified something in it?
Very nice, thanks @NepoRood
Debuffer said:
Great.
Is it using bhb27 kernel or you modified something in it?
Click to expand...
Click to collapse
Using bhb's stock CM14 kernel, it's running great. I'll be adding more information to the first 3 posts as time goes on :good:
NepoRood said:
Using bhb's stock CM14 kernel, it's running great. I'll be adding more information to the first 3 posts as time goes on :good:
Click to expand...
Click to collapse
But is it using Bhb kernel 1.0?
Or you changed something and it's your 1.0 version?
ROM was running great. Been running it a couple days without hassle
Nitefire77 said:
ROM was running great. Been running it a couple days without hassle
Click to expand...
Click to collapse
same here ,smooth and fast with no reboots.
For those who has problems installing because of com.android.phone has stopped
First fresh install
Reboot
It'll problem
Reboot in recovery
Dirty install the rom again (without any configuration done in the first boot)
Reboot
Worked for me.
@NepoRood can you please add caffeine tile in next update? And maybe zzmoove gov? I know its just the first build, but this additions would be really loved. Thank you for such a good job.
Link to kernel not working. Could you please confirm
janine13 said:
Link to kernel not working. Could you please confirm
Click to expand...
Click to collapse
It's a typo, my bad. You know that is the source code, right?
@Debuffer, personally, I have no use for all the "extra" functionality of a custom kernel. After the holidays, I'll look into providing a custom kernel along with the stock one (like bhb does with RR). Just out of curiosity, did you install the Kernel Auditor app?
NepoRood said:
@Debuffer, personally, I have no use for all the "extra" functionality of a custom kernel. After the holidays, I'll look into providing a custom kernel along with the stock one (like bhb does with RR). Just out of curiosity, did you install the Kernel Auditor app?
Click to expand...
Click to collapse
Yeah. I use Bhb kernel since 5.1.
Thank you for this.
NepoRood said:
It's a typo, my bad. You know that is the source code, right?
Click to expand...
Click to collapse
Yeah, I got that part after I went to the site. I was looking for the kernel in a bid to try using it with the ROM. I have been using the ROM for the past 3 hours now and all seems smooth and stable so far. I will keep running it and see, if it stays this way I just may have a new daily driver
Great rom, it runs very well. Only issue with it, is that the torch using gestures is very inconsistent. Similar to what happened when 6.0 roms first came out. It either takes 30 seconds to activate, or never works at all.
Also, the setting to control media volume by default doesn't work. This is the same on cm14.1, so imagine it's not something you can easily change in the rom.
Users with GPS problem only make the flash of this file that will be solved.
https://www.androidfilehost.com/?fid=24531035584725320
Please add publication. @NepoRood
Very good rom.stable and smoot.but there is little laggy for camera conect in many apk.more of it happens for front camera
Sent from my DROID Turbo using Tapatalk
great rom, liked it alot, clean installed it without any phone stop errors, bhb27's auditor n govtuner works perfectly aswell
only one issue i have was when i take photos im not able to share them online for some reason (example via watsapp or facebook) it always shows "sharing failed please try again" msg. dont know what happened there i tried re-installing watsapp and also a different camera app but still get the same error.
reverted back to 6.1 for now as i really need photo share as my work is depended on it, although i did notice the pictures i took on 7.1 now in the gallery were corrupt n un-viewable aswell ? was there something i did wrong? should i try flashing again?
Pakman300 said:
great rom, liked it alot, clean installed it without any phone stop errors, bhb27's auditor n govtuner works perfectly aswell
only one issue i have was when i take photos im not able to share them online for some reason (example via watsapp or facebook) it always shows "sharing failed please try again" msg. dont know what happened there i tried re-installing watsapp and also a different camera app but still get the same error.
reverted back to 6.1 for now as i really need photo share as my work is depended on it, although i did notice the pictures i took on 7.1 now in the gallery were corrupt n un-viewable aswell ? was there something i did wrong? should i try flashing again?
Click to expand...
Click to collapse
There are 2 folders where pictures are stored: DCIM and Pictures
Using the built in file explorer (or a PC), rename each of these. I did DCIM2 and Pictures2, then use your phone to take a picture. Both folders will be recreated. Then, drag and drop everything from the #2 folder into the corresponding "New" folder.
Hassle? Just a bit, but we did just change branches on our android phones :laugh:

[ROM][New][Unofficial] OpenKirin's LineageOS 14.1 for Honor 8

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest update: June 29th 2017​
Disclaimer:
Altough we are working hard to deliver a bug-free rom, things may break and we are not responsible if something goes wrong and your hardware becomes damaged or if you have any problem, you are taking a risk flashing roms.
Hi, so you might wonder why the other thread got closed and what's all of this about. Well, the answer is that now I'll be maintaining this rom while Surdu will take care of Resurrection Remix, the rom is the same and you can flash this builds without wiping if you had the 'older' rom.
Instructions:
If you come from stock EMUI 5.0:
Install TWRP (Available in this subforum)
Format data
Flash vendor.zip
Flash LineageOS's zip
If you already have LineageOS:
Flash LineageOS's zip
Downloads:
Find them in this DevDB project section called 'Downloads' (you might need to use a computer)
Bugs:
Encryption
Changelog:
Code:
01/06/2017 - Fixed random reboot issue
01/06/2017 - Added loop support
29/06/2017 - Fixed tethering
29/06/2017 - Fixed shaky camera
29/06/2017 - Updated Lineage source
Asking for help...
There are still some little bugs to fix and things will break from time to time, so in order to properly help you and keep the thread organized every help petition should include:
Brief description of the issue
A way to replicate it
Screenshots/Logs
Without that information, your post will be futile so please meet those easy conditions and try to keep the thread clean!
Last but not least, thanks to the whole OpenKirin team (@surdu_petru @OldDroid) for their amazing job at keeping updated roms for kirin devices as well as helping with this one.
XDA:DevDB Information
LineageOS 14.1 for Honor 8, ROM for the Honor 8
Contributors
XePeleato, surdu_petru, OldDroid
Source Code: https://github.com/OpenKirin
ROM OS Version: 7.x Nougat
ROM Firmware Required: EMUI 5.0
Based On: LineageOs
Version Information
Status: Stable
Created 2017-06-01
Last Updated 2017-06-30
Going to try it these days. Thanks
I see vendor.zip only in Downloads section
Yeah only vender.zip is in the download section, there's no Lineage zip
morpheus302 said:
I see vendor.zip only in Downloads section
Click to expand...
Click to collapse
Gus194 said:
Yeah only vender.zip is in the download section, there's no Lineage zip
Click to expand...
Click to collapse
Please be patient, it's coming very soon
Thank you for understanding !
I'm bit confused. So where is the download section?
Found it

			
				
Sorry about that, there must be a problem with XDA servers, it's taking more than an hour to upload! And unfortunately I couldn't upload it without posting the DevDB thread, if it keeps working like that I'll find a more reliable storage solution.
I am really sorry! Check back in 5 minutes or so
Very nice job, and happy you fixed the issue. I'll set it as my daily driver once everything's OK
So what exactly caused the issues ? I'm curious as to whether it could have been solved on our own (i do say without Huawei's kind but forced operations).
And what do we do with that vendor.zip ? Flash it on top of Lineage's original Vendor package ?
(EDIT : Check post on top, the joys of cross-posting )
Still, thank you immensely on behalf of all the community
DJ Daemonix said:
So what exactly caused the issues ? I'm curious as to whether it could have been solved on our own (i do say without Huawei's kind but forced operations).
Click to expand...
Click to collapse
Hi, the problem was that a driver introduced by Huawei checked the time that it takes to boot (running in a kthread), if it takes more than three minutes it reboots to eRecovery, but it looks like it waits for a signal from userspace to check if it booted (like, write 1 to /sys/.... Whenever it boots).
We were actually aware of this being the issue, and tried to avoid it by editing the function's code (ARM64 instructions because we had no source (By filling the function with NOP or returning 0)) but we didn't succeed at first and thought that the kernel release was near so it made no sense to keep wasting time on it, if you want to see more details just go to github and check what we did, I hope that you understood the explanation.
Thanks for your kind words!
EDIT: The rom is up, you can download it now.
The Lineage zip file has uploaded! Thanks again for all your guys work.
Thx for your job. I'll now have to unlock the bootloader and start flashing. Two questions: can I lock the bootloader again once I installed LOS? Do i need to install twrp or is it enough to just boot it for installation?
faeArai said:
can I lock the bootloader again once I installed LOS?
Click to expand...
Click to collapse
Not at all, you need to be on EMUI in order to relock it. (You can if you go back to EMUI but I think that you asked if you could do that while you are on LineageOS).
faeArai said:
Do i need to install twrp or is it enough to just boot it for installation?
Click to expand...
Click to collapse
TWRP is just needed to format data and install the ROM, there's no need to keep it after installing the ROM.
What issues, if any, are present? Does the dual camera work? FPS fully functional along with gestures? Thanks
NeophyteGS2 said:
What issues, if any, are present?
Click to expand...
Click to collapse
Encryption
NeophyteGS2 said:
Does the dual camera work?
Click to expand...
Click to collapse
I am not sure about that, I think it does because that's coded into the HAL and we are using the one from Huawei.
NeophyteGS2 said:
FPS fully functional along with gestures? Thanks
Click to expand...
Click to collapse
It works well but the gestures are not included by now, maybe in the next release.
XePeleato said:
Encryption
I am not sure about that, I think it does because that's coded into the HAL and we are using the one from Huawei.
It works well but the gestures are not included by now, maybe in the next release.
Click to expand...
Click to collapse
Fantastic, thanks for the quick response. I'll test it out later and reply with feedback after a week or so
NeophyteGS2 said:
What issues, if any, are present? Does the dual camera work? FPS fully functional along with gestures? Thanks
Click to expand...
Click to collapse
I do not want to be rude, but if you want a personalized rom, based LOS or AOSP with fully dual camera support and FPS gesture, you better stay on stock EMUI
does the rom supports volte?if no please add that feature..this is the one con to make it as my daily driver
---------- Post added at 07:20 PM ---------- Previous post was at 07:20 PM ----------
thanks for your hardwork :good:
Where can I download this?
XePeleato said:
TWRP is just needed to format data and install the ROM, there's no need to keep it after installing the ROM.
Click to expand...
Click to collapse
What about updates? Do I need TWRP for (OTA-LOS) updates?

[ROM] [UNOFFICIAL] [7.1.1] [BETA] LineageOS 14.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I present to you, LineageOS for the X2 . Lineage is one of the premier custom ROMS for Android with many extra features and customizations. This build was ported by myself using bits and pieces from a few separate unofficial builds for different Huawei devices. I did some Framework edits to add/remove features. I hope you enjoy the rom and please hit the thanks button if you like what I've done. Thanks to all who have donated, it's never required but much appreciated and thank you to @Djiban for providing me with an X2 to keep the developing going and to @audioralf for all the testing and bug findings on all of my roms and everyone else for your help. I am not responsible for bricked devices, dead SD Cards or if your phone melts and burns in your hand
Thanks to spiritx & T1mb3 for the original builds.
Features
AdAway
Kernel Adiutor
Footej Camera
Init.d Support
Permissive SeLinux
Pre-Rooted w/Magisk
Xposed Compatible
Instructions
You must already be on Android 6.0 (B2xx) to flash this rom
Boot into TWRP
Do a backup
Wipe and flash ROM
That's it, you're done!
First boot will take a few minutes, please be patient.
Bugs
LED notification light works but stays solid
Only one sim is supported
Signal icon always shows one bar
Battery drains a little faster than stock EMUI
Read the Changelogs for information
Download
https://androidfilehost.com/?fid=5862345805528050336
Gapps
http://opengapps.org/
Changelogs
3-5-18: Beta 1
7-17-18: Beta 2
-Fixed Mobile Data
-Removed FM Radio
-Removed Camera & Gallery for now as they don't and may never work due to no custom Kernel for Nougat
Reserved
Download link shows "KangVIP Slim B212v4 Xposed "
goon-heaven said:
Download link shows "KangVIP Slim B212v4 Xposed "
Click to expand...
Click to collapse
Sorry, i just fixed that. If you go to androidfilehost.com and search my username you can always see all of my files even if they aren't posted on here yet.
Thanks. I just tried searching for ajsmsg78 at androidfilehost.com, and it only showed 8 TWRP zips. Any ideas?
goon-heaven said:
Thanks. I just tried searching for ajsmsg78 at androidfilehost.com, and it only showed 8 TWRP zips. Any ideas?
Click to expand...
Click to collapse
https://androidfilehost.com/?w=profile&uid=24269982086988507
My supported devices is on the right. The X2 is under Generic Device/Other.
Wipe and flash ROM
Click to expand...
Click to collapse
in general wich WIPE do you recommand (depending on which kind you are coming from) ?
thanks
Djiban said:
in general wich WIPE do you recommand (depending on which kind you are coming from) ?
thanks
Click to expand...
Click to collapse
If you're coming from any rom other than this one wipe data/system/caches
ajsmsg78 said:
If you're coming from any rom other than this one wipe data/system/caches
Click to expand...
Click to collapse
Thank you very much, AJ
Is there a GAPPS suggested?
Pico ok??
mouse723 said:
Thank you very much, AJ
Is there a GAPPS suggested?
Pico ok??
Click to expand...
Click to collapse
Open gapps, whichever you want, just make sure it's 6.0 that you're downloading.
New life!
Thanks ajsmsg78! ROM working good so far! Push working great! GPS... I'll let you know in a few days! Battery seems to drain a little faster. Not a big deal here... No double tap to wake options? Don't really need it... Phone is very stable!
Steamer2499 said:
Thanks ajsmsg78! ROM working good so far! Push working great! GPS... I'll let you know in a few days! Battery seems to drain a little faster. Not a big deal here... No double tap to wake options? Don't really need it... Phone is very stable!
Click to expand...
Click to collapse
I couldn't get dt2w working so I removed it from the framework. It's something with the kernel and that's where my extreme lack of kernel knowledge shows
There are actually a few apps in the play store where you can use the proximity sensor to wake the phone (wave your hand over the sensor to unlock) but dt2w does consume more battery.
Xposed installed and working here. Thank you for great ROM!
ajsmsg78 said:
I present to you, LineageOS for the X2 . Lineage is one of the premier custom ROMS for Android with many extra features and customizations. This build was ported by myself using bits and pieces from a few separate unofficial builds for different Huawei devices (Piaooops X2 build, the build for the P8 and Honor 7). I did some editing of the framework to add/remove features. I hope you enjoy the rom and please hit the thanks button if you like what I've done. Thanks to all who have donated, it's never required but much appreciated and thank you to @Djiban for providing me with an X2 to keep the developing going and to @audioralf for all the testing and bug findings on all of my roms and everyone else for your help. I am not responsible for bricked devices, dead SD Cards or if your phone melts and burns in your hand
Features
AdAway
Kernel Adiutor
Footej Camera
Init.d Support
Permissive SeLinux
Pre-Rooted w/Magisk
Xposed Compatible
Instructions
You must already be on Android 6.0 (B2xx) to flash this rom
Boot into TWRP
Do a backup
Wipe and flash ROM
That's it, you're done!
First boot will take a few minutes, please be patient.
Bugs
You tell me
Read the Changelogs for information
Download
https://www.androidfilehost.com/?fid=962187416754465742
Gapps
http://opengapps.org/
Changelogs
3-5-18: Initial build
Click to expand...
Click to collapse
Is it possible to dirty flash over cyanogenmod by gagua?
I think about my wifes phone to flash.
Thy, Ray
ajsmsg78 said:
I couldn't get dt2w working so I removed it from the framework. It's something with the kernel and that's where my extreme lack of kernel knowledge shows
There are actually a few apps in the play store where you can use the proximity sensor to wake the phone (wave your hand over the sensor to unlock) but dt2w does consume more battery.
Click to expand...
Click to collapse
Notification led doesn't blink but does stays on...
Hi! And why one SIM card?
goon-heaven said:
Xposed installed and working here. Thank you for great ROM!
Click to expand...
Click to collapse
which version of xposed did you install? I tried version 89 and didn't get it to work.
Thanks in advance
Wolfgang
version 89_sdk23_arm64 using installer 3.1.5
what exactly did not work?
goon-heaven said:
version 89_sdk23_arm64 using installer 3.1.5
what exactly did not work?
Click to expand...
Click to collapse
thanks, that' what I used.
I got a message, that xposed couldn't be activated .
I'll give it another try.
Thanks - Wolfgang
Yes, I got that message too. Cant remember exactly what I did, I think I rebooted, and tried a couple of times, then it worked.

Categories

Resources