Database Info

Directly booting to recovery

I have a rooted S-7500, with CWM recovery 5.0.2.8 installed. I (by mistake) allowed the 'software update' option to install a system update(or something) today by mistake (I know, you should never install system updates after rooting. My bad.) Since then, the phone directly goes to the cwm recovery mode on powering on, and i am unable to do anything else
I am not very well versed with the finer details of rooting bootloader recovery n all...so pls some details with steps...if possible .
Any help whatsoever...please I will be really grateful

You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system ​

j.posarekar70 said:
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system ​
Click to expand...
Click to collapse
Thanks!!! It totally worked!
Just a clarification...now that i have got the stock rom back on my phone...am i right in saying that I have lost root access, my phone is totally back to the 'original' state, and i have lost CWM as well? Please correct me if I am wrong.
And assuming that I am correct(above), I would like to re-root my device(need to use proxydroid to surf internet over the damned proxy server!). So..can I follow the standard method, ie, can I do it the same way I had done before, or do i need to do something different now?
And once again...THANK YOU for your help! I had ended up hard bricking my previous phone, and was really scared when this happend to my aceP. You saved me!

Easy way to ROOT your SGAP
Yes by the time you flash stock rom you loss root even any custom recovery you flashed before...
but now if you want to root your SGAP again don't follow that guide again which you done before just follow this :
Download ODIN from Downloading link below (inside ODIN software folder)
Download any one recovery which you like TWRAP / CWM v5.5 (inside Custom recovery folder)
Download Root_SGAP.zip from Root folder & place that zip inside in your sd card
Click to expand...
Click to collapse
Download Link : GALAXY Ace Plus - Basic stuff
FOR Custom_Recovery :
Open odin, be sure your system has already install drivers & if kies is there close it.
extract recovery zip
connect device to pc in download mod (vol down + power + home) & select that (recovery) .md5 file in pda section inside ODIN software
Click start & wait to reboot device
FOR ROOT :
Now boot device in CWM mod ( vol up + down + power + home)
choose zip from sd card & select Root_SGAP.zip
DONE.
Click to expand...
Click to collapse
you've successfully ROOT & flash custom recovery on your device by just few simple steps ​

Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.

dubey.arpit said:
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
Click to expand...
Click to collapse
if you are going to stick on stock rom forever & only want to root device then stock recovery is ok for you...
but while dealing with custom roms, custom recoveries are smart choice.
it has lot of additional options than stock recovery.
so my opinion yes use custom recovery ​

Stuck in boot loop
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.

Snowflakes91 said:
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Click to expand...
Click to collapse
Check my guide on how to fix a bootloop in my sig

Question About Flashing A Stock ROM
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca

cwm fixed
davidboca2000 said:
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
Click to expand...
Click to collapse
The new cwm by mb-14 is fixed and there are no more bootloops​

Reply
bibhu60 said:
The new cwm by the wisp is fixed and there are no more bootloops​
Click to expand...
Click to collapse
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!

Here it is..
davidboca2000 said:
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Click to expand...
Click to collapse
CWM 5.5.0.4 BY mb-14
I am also using this recovery from months i have flashed many roms and mods but it does not have any bugs.
Working perfectly...
Hit thanks if I helped You don't say it...
​

thanks
thanks for help

Help root for PE-TL10

Hi
i can't root my device if you can help me please
my phone is honor 6 plus PE-TL10
i did unlock and i use multi-tool when i flash cwm recovery it is ok but i cant boot from it, when i hold vel+ and power comes huawie logo only then black screen, then i tried other verions of CWM and nothing was ok, then i back to stock recovery, so i want boot recovery to root my phone
Some guys said it works with them , so can you help me please with files or something ?
Thank you,

and2011 said:
Hi
i can't root my device if you can help me please
my phone is honor 6 plus PE-TL10
i did unlock and i use multi-tool when i flash cwm recovery it is ok but i cant boot from it, when i hold vel+ and power comes huawie logo only then black screen, then i tried other verions of CWM and nothing was ok, then i back to stock recovery, so i want boot recovery to root my phone
Some guys said it works with them , so can you help me please with files or something ?
Thank you,
Click to expand...
Click to collapse
I've ordered 6 plus but it is not with me yet. However, have you tried using tool provided on the Chinese site instead of multi tool? Links are in this forum. If you cant find, I can look up for you. Thanks.

I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.

thank you
Sathelp said:
I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.
Click to expand...
Click to collapse
Thanks very much now i rooted , it is very help
now i search for changing country code and remove chinese lang

Sathelp said:
I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.
Click to expand...
Click to collapse
Sathelp, do you know where I can find a full stock ROM for PE-TL-10?

dchsub said:
Sathelp, do you know where I can find a full stock ROM for PE-TL-10?
Click to expand...
Click to collapse
there are all the ROM versions at Needrom.com but ours is at http://www.needrom.com/download/honor-6-4g-pe-tl10/
or from http://www.huaweimobileshop.com/download (right at the bottom)

Sathelp said:
there are all the ROM versions at Needrom.com but ours is at http://www.needrom.com/download/honor-6-4g-pe-tl10/
or from http://www.huaweimobileshop.com/download (right at the bottom)
Click to expand...
Click to collapse
Sathelp thank you very much. It is very helpful.

Can I use this method for Indian version

Sathelp said:
I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.
Click to expand...
Click to collapse
Just flash this 2 file or still need unlock phone first? Thank you

device not found
tonylhw82 said:
Just flash this 2 file or still need unlock phone first? Thank you
Click to expand...
Click to collapse
I tried on my win 7 and win 8, when in fastboot, I see in red letters, PHONE unlocked, i think bootloader is unlocked but I didn't do that , it was like that when I booted the first time to fastboot
when I use the flashtool , i see : device not found .
Adb driver is installed , hisuite also, drivers are working ..
Can someone assist please ?
device : pe tl10 huawei honor 6 plus
bought in Belgium
---------- Post added at 01:44 PM ---------- Previous post was at 01:41 PM ----------
Sathelp said:
I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.
Click to expand...
Click to collapse
I'm stuck on starting ADB, waiting for device..
Can someone assist?

Guys how to unlock bootloder ? step by step guide for PE-TL10 PLZZZ

Sathelp said:
I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.
Click to expand...
Click to collapse
hye. just follow your tutorial but ending in bootloop. im able to flash those recovry but failed to boot to it. phone just bootloop . i think this tutorial cannot be done on lollipop 5.1.1 version.

I have not tried this on 5.1.1 as IU have had no need to root it. Mine is still with an unlocked boot loader from 4.1.1 but running 5.1.1
I hope you have managed to recover your system.

and2011 said:
Thanks very much now i rooted , it is very help
now i search for changing country code and remove chinese lang
Click to expand...
Click to collapse
hi
How to change the region/country code? I have petl10 provided China. I want changing code with Europa . They did this for the Mate7 here. But *#*#2846579159#*#* dont work on honor6+.
(sorry for bad english)

please my huawia tab t1701u can't be rooted.please help me..........

[Simple Guide] Rooting Oppo F1 Plus X9009

Hello, this is simple guide to root Oppo F1 Plus. No need to unlock bootloader :fingers-crossed:
This method worked and tested :highfive:
Yes i know there's another guide in this forum but it only link to youtube video tutorial.
First, download this update.zip and then copy it to your device (internal or MicroSD is allright, up to you)
*You can download file update.zip via attachment below
1. Go to recovery mode. Turn off your F1 Plus, wait for a second and then turn it on again with Power + Volume Down
2. Select language (english of course ahh is up to you)
3. Choose Install from storage and select update.zip
4. Wait the process (below 1 minute) and when it done just reboot system
5. Finishing updating and then check in your app drawer SuperSu should appear
6. Update SuperSU binary if needed
7. Done

will this work with the F1f version of the phone?

chooky536 said:
will this work with the F1f version of the phone?
Click to expand...
Click to collapse
There are instructions in a guide in this very section of this forum.

Works like a charm. Having recently purchased the phone I didn't want to root it. But after I realized that Oppo released the May firmware (around 1.3 GB) on their website. Everything works as it should. I'm hoping for an official forum with more stuff.
A question, what theme are you using with the default launcher?

Ron1209 said:
Works like a charm. Having recently purchased the phone I didn't want to root it. But after I realized that Oppo released the May firmware (around 1.3 GB) on their website. Everything works as it should. I'm hoping for an official forum with more stuff.
A question, what theme are you using with the default launcher?
Click to expand...
Click to collapse
Lucid launcher with darkonis icon theme

Can you confirm if Xposed is working with stock recovery? If working please specify the version

Ron1209 said:
Can you confirm if Xposed is working with stock recovery? If working please specify the version
Click to expand...
Click to collapse
I tried flashing Xposed with stock recovery.
Install failed.

Is it still working?

Danusyakti said:
Lucid launcher with darkonis icon theme
Click to expand...
Click to collapse
Have u tried flashfire to flash xposed?

kazuya_gonzalez said:
Have u tried flashfire to flash xposed?
Click to expand...
Click to collapse
What is FlashFire? I'm new to this, I had a Samsung S3 earlier so CWM was the king. Also, I get notifications for software updates but it just won't download. Even after unrooting and factory reset.

Ron1209 said:
What is FlashFire? I'm new to this, I had a Samsung S3 earlier so CWM was the king. Also, I get notifications for software updates but it just won't download. Even after unrooting and factory reset.
Click to expand...
Click to collapse
Flashfire is a tool that can flash zip / backup ur phone without unlocking bootloader or install custom recovery.. So u can install xposed.zip.. But there is no one try it for x9009 oppo f1 plus.. Make sure u check ur hardware info first so u download the right thing for ur phone if arm64 u must download for arm64.. Do it on ur own risk..

Just tried, its not working with Flashfire

theobeaudenon said:
Just tried, its not working with Flashfire
Click to expand...
Click to collapse
Rooted stockrom , arm64 xposed and flashfire? Makes ur device brick?

kazuya_gonzalez said:
Rooted stockrom , arm64 xposed and flashfire? Makes ur device brick?
Click to expand...
Click to collapse
No brick, no bugs but xposed app do not detect it

There was a link for TWRP in the YouTube video. Anyone tried? If you want to try it's in Chinese but TWRP has a translate option.
I am now able to get OTA after 5th factory reset.

Ron1209 said:
There was a link for TWRP in the YouTube video. Anyone tried? If you want to try it's in Chinese but TWRP has a translate option.
I am now able to get OTA after 5th factory reset.
Click to expand...
Click to collapse
Any link and tutorial ?

Link for TWRP - pan.baidu.com/s/1qXNnLdq#path=%252Fandroid%252F%25E7%25AC%25AC%25E4%25B8%2589%25E6%2596%25B9ROM%252FOPPO%2520R9m%252Ftwrp%2520recovery

Ron1209 said:
Link for TWRP - pan.baidu.com/s/1qXNnLdq#path=%252Fandroid%252F%25E7%25AC%25AC%25E4%25B8%2589%25E6%2596%25B9ROM%252FOPPO%2520R9m%252Ftwrp%2520recovery
Click to expand...
Click to collapse
Just made it !!
I used this link : https://ce398c.lt.yunpan.cn/lk/cPi8mZgDBbGRk
and xposed-v86-sdk22-arm64.zip

theobeaudenon said:
Just made it !!
I used this link : https://ce398c.lt.yunpan.cn/lk/cPi8mZgDBbGRk
and xposed-v86-sdk22-arm64.zip
Click to expand...
Click to collapse
Hmm thanks for confirming it is work

theobeaudenon said:
Just made it !!
I used this link : https://ce398c.lt.yunpan.cn/lk/cPi8mZgDBbGRk
and xposed-v86-sdk22-arm64.zip
Click to expand...
Click to collapse
Please share the whole method. Thank you.
Another thing, the link I sent has an unofficial cm12.1 link for our device. Can someone please check that as well?

Please Help! is my honor 8 dead?

Help. I have destroyed my device. I have installed EMUI 5.0. Then I installed twrp 3.1.1. Everything was fine. Then I have flashed a wrong supersu file. Now I only get into the fastboot mode and the "erecovery". The TWRP 3.1.1 I can not flash. It means i can flash it with adb, but the device always boots into the system. My smartphone hangs in the bootloop. (After Honor logo it restarts again and again) What can I do? How can a go back to stock? Or flash twrp without booting the system after flashing twrp? Hope someone can help me

soulbreeder83 said:
Help. I have destroyed my device. I have installed EMUI 5.0. Then I installed twrp 3.1.1. Everything was fine. Then I have flashed a wrong supersu file. Now I only get into the fastboot mode and the "erecovery". The TWRP 3.1.1 I can not flash. It means i can flash it with adb, but the device always boots into the system. My smartphone hangs in the bootloop. (After Honor logo it restarts again and again) What can I do? How can a go back to stock? Or flash twrp without booting the system after flashing twrp? Hope someone can help me
Click to expand...
Click to collapse
Boot to erecovery, select the first option. It will download and install your stock firmware.
Sent from my Honor 8 using XDA Labs

adriansticoid said:
Boot to erecovery, select the first option. It will download and install your stock firmware.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Thank you. I have tried to do this, but i getting "getting package info failed". i have tried with different wlan-connections.. is there a way to flash stock rom with adb? i can boot also in TWRP 3.1.1 there is a error "Failed to mount '/cust' (Invalid argument)" - i have tried to flash ressurection remix after a full wipe, because of that, but RR is does not finishind booting only see the start animation 15minutes. is there any way to go back to stock and start rooting again? thank you very much!

Rommco05 said:
so for enter to twrp : unplug your phone usb/charge and turn device off. So now, turn on with button combo: hold vol up + on/off, when u see blue scree honor, release on/off button but still continue holding vol+
Just to be sure...
Click to expand...
Click to collapse
Thank you. i can boot also in TWRP 3.1.1 there is a error "Failed to mount '/cust' (Invalid argument)" - i have tried to flash ressurection remix after a full wipe, because of that, but RR is does not finishing booting i only see the start animation 15minutes. is there any way to go back to stock and start rooting again? or can i flash stock (or pre-rooted) rom with adb? erecovery download does not working i get "getting package info failed". i have tried with different wlan-connections.. thank you very much!

soulbreeder83 said:
Thank you. I have tried to do this, but i getting "getting package info failed". i have tried with different wlan-connections.. is there a way to flash stock rom with adb? i can boot also in TWRP 3.1.1 there is a error "Failed to mount '/cust' (Invalid argument)" - i have tried to flash ressurection remix after a full wipe, because of that, but RR is does not finishind booting only see the start animation 15minutes. is there any way to go back to stock and start rooting again? thank you very much!
Click to expand...
Click to collapse
There is a way with ADB and fastboot. Download an appropriate firmware file for your mobile, then using Huawei Update Extractor, flash the image to their respective partitions.
Sent from my Honor 8 using XDA Labs

Fastboot is the best option for now

Rommco05 said:
Ok your model is? For now will be good to flash stock rom
Click to expand...
Click to collapse
My Model is FRD-L19 it's the Premium Version in Europe. i think... but i dont know how to do that. do you know a good guid? thank you very much! : )

adriansticoid said:
There is a way with ADB and fastboot. Download an appropriate firmware file for your mobile, then using Huawei Update Extractor, flash the image to their respective partitions.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Thank you : ) now i am writting with two members about the same. maybe we should talk all three togheter?! i try to find a guid, how to flash it right way and the right firmware! : ) Thank you!!

yes!! its done!! i have made a new installation *_* copied unziped firmware to dloadfolder and with pressing Vol+/Vol- and power button. it has installed the firmware completely! can i now update to 7.0 and unlock and root on nougat? i will use different supersu and different twrp, i think?! thank you guys very much!! : )

soulbreeder83 said:
yes!! its done!! i have made a new installation *_* copied unziped firmware to dloadfolder and with pressing Vol+/Vol- and power button. it has installed the firmware completely! can i now update to 7.0 and unlock and root on nougat? i will use different supersu and different twrp, i think?! thank you guys very much!! : )
Click to expand...
Click to collapse
That's great. Yes you can upgrade. No need to use a different TWRP and SuperSU. Just be sure to mount Vendor partition when flashing SuperSU.

soulbreeder83 said:
yes!! its done!! i have made a new installation *_* copied unziped firmware to dloadfolder and with pressing Vol+/Vol- and power button. it has installed the firmware completely! can i now update to 7.0 and unlock and root on nougat? i will use different supersu and different twrp, i think?! thank you guys very much!! : )
Click to expand...
Click to collapse
That's great, if I were you, I'll stick to stock for a little while

PalakMi said:
That's great, if I were you, I'll stick to stock for a little while
Click to expand...
Click to collapse
That's true, same as you.

PalakMi said:
That's great, if I were you, I'll stick to stock for a little while
Click to expand...
Click to collapse
Why? I am since 3 Years on rooted smartphones. I need root restore some root apps with titanium backup. I have rooted one time my honor 8 with no problems. If its thw same way to root it again on nougat (the same supersu and twrp version) it should be no problem)

Rommco05 said:
U find for yourself?
Click to expand...
Click to collapse
Found a manual on xda

adriansticoid said:
That's great. Yes you can upgrade. No need to use a different TWRP and SuperSU. Just be sure to mount Vendor partition when flashing SuperSU.
Click to expand...
Click to collapse
Ok. Really? I mean something seen about different twrp and supersu version. I can need the same files, i used for marshmallow? - Now i have to find out what do you mean with "mount vendor" mount in twrp? With enabled mtp? Thank you!

soulbreeder83 said:
Ok. Really? I mean something seen about different twrp and supersu version. I can need the same files, i used for marshmallow? - Now i have to find out what do you mean with "mount vendor" mount in twrp? With enabled mtp? Thank you!
Click to expand...
Click to collapse
Flash TWRP from [url="https://forum.xda-developers.com/honor-8/development/twrp-t3566563/page1]HERE,[/url] then boot to recovery. You'll see an option there called Mount, click that and you'll see a checklist of mountable partitions. Just check on Vendor before you flash SuperSU.

soulbreeder83 said:
Why? I am since 3 Years on rooted smartphones. I need root restore some root apps with titanium backup. I have rooted one time my honor 8 with no problems. If its thw same way to root it again on nougat (the same supersu and twrp version) it should be no problem)
Click to expand...
Click to collapse
Yeah me too I have been on rooted and ROMd phones since a lot of time, but I do miss stock from time to time

PalakMi said:
Yeah me too I have been on rooted and ROMd phones since a lot of time, but I do miss stock from time to time
Click to expand...
Click to collapse
i wanna have stock, but rooted... and now i have the next problem... damn... think i go back to sony xD

soulbreeder83 said:
i wanna have stock, but rooted... and now i have the next problem... damn... think i go back to sony xD
Click to expand...
Click to collapse
Lol xD

adriansticoid said:
That's great. Yes you can upgrade. No need to use a different TWRP and SuperSU. Just be sure to mount Vendor partition when flashing SuperSU.
Click to expand...
Click to collapse
and the next problem!! ( is this normal on a huawei device? I have done the update. But its very buggy i think. no keyboard inside only google voice... slow.. and cant open update programm! i am on
Build-Number: FRD-L19C900B300 - EMUI-VERION: 5.0 - ANDROID-VERSION: 7.0
and now i do not now how to go back to 6.0 - i have downloaded de downgrade update.app vom hihonor and flashed it with stock recovery... but i am still on 7.0 -.- can you say me how i can flash now 6.0? maybe with adb?
thank you for your support!

Help to flash ULEFONE S8 PRO GOLD

Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you

mfonemaello said:
Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you
Click to expand...
Click to collapse
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too

thxs Klima i fixed
Klima1123 said:
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too
Click to expand...
Click to collapse
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?

mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
I've heard about it, but I didn't noticed nothing strange coming from the app, I'll scan it with avast, if he finds something, I'll deleted him, my phone does have root
---------- Post added at 01:50 PM ---------- Previous post was at 01:41 PM ----------
Hey guy, I'm trying to port lineage os 14 & 15 to the S8 Pro, do you have experience with twrp, flash etc.? You could help with being my beta tester, next I'll put some betas on android file host, and make a forum here on XDA for the phone

Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?

4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
I have found it on 4pda.
Just google ulefone s8 pro 4pda.
You need to let translate by google, because of different language.

4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root

Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?

Klima1123 said:
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root
Click to expand...
Click to collapse
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.

4ndyroid said:
Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?
Click to expand...
Click to collapse
Something like this has happened to me too. Boot your phone on twrp then select the option 'Wipe', then "Format data", my phone only booted up after I did this
---------- Post added at 04:41 PM ---------- Previous post was at 04:36 PM ----------
mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
In the sound recorder I didnt find nothing, but the app GYBeautySnap aka BeautyMakeup open some annoyng processes (that consumes about 40mb of ram) that has something like ads, I think he is the real virus

Tried wiping then 'format system', still didn't work, stays stuck at the boot logo, bit thanks for the help anyway.

It rebootq only to a green TWRP!

Touf344 said:
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.
Click to expand...
Click to collapse
My phone use V3.01 firmware and it's worked

Klima1123 said:
My phone use V3.01 firmware and it's worked
Click to expand...
Click to collapse
What was the process you used?

4ndyroid said:
What was the process you used?
Click to expand...
Click to collapse
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment noverity.zip

Klima1123 said:
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment 4460246
Click to expand...
Click to collapse
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?

4ndyroid said:
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?
Click to expand...
Click to collapse
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip

Klima1123 said:
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip
Click to expand...
Click to collapse
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway

4ndyroid said:
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway
Click to expand...
Click to collapse
which firmware version are installed on your phone? Have you tried flashing the official ROM from the ulefone site, then retried the process?

Have tried on both v3. 01 & v3. 03 firmwares. Stock firmware wasn't downloaded directly from ulefone site, imagine it will be the same but will give it a go.