Database Info

[Q] Back to stock recovery B137SP03 without recovery image

Hello all,
I have been going slightly mad today trying to get my mate 7 2GB back from CWM to stock recovery. The main problem is that I do not have a stock recovery image. But after being shown where to find one, I noticed that I could not get it successfully flashed either.
Since I do not really know how to do this, I used flashify, but that did not work and either returned me to the CWM or sent me to rescue.
Can someone help me to a) get a stock recovery image for the Mate 7 version MT7-L09 and b) show me how to properly flash it?

Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?

djzero86 said:
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
Click to expand...
Click to collapse
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?

Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device

dekraan said:
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Click to expand...
Click to collapse
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
Ali_adel_medo said:
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
Click to expand...
Click to collapse
You have a unlocked bootloader???

Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more

Ali_adel_medo said:
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Click to expand...
Click to collapse
Do you tried flash via fastboot ?
fastboot flash recovery recovery.img
Or try to use this tool
http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424
This should work.

The fast boot just stucks at waiting for device
And the tool you send says that the stock recovery works only on tl_09 and my device is tl_10

djzero86 said:
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
You have a unlocked bootloader???
Click to expand...
Click to collapse
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?

I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
dekraan said:
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
Click to expand...
Click to collapse
Ok.... you have the stock recovery now???

djzero86 said:
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
Ok.... you have the stock recovery now???
Click to expand...
Click to collapse
I think so. If stock looks like I described: black screen, large EMUI logo, and the options reboot system now, wipe data/factory reset and wipe cache partition?

That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...

djzero86 said:
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
Click to expand...
Click to collapse
Great, thank you for your fantastic help!
I will get a new micro-sd card tomorrow, and will try it right away!

Good luck... come back to report

djzero86 said:
Good luck... come back to report
Click to expand...
Click to collapse
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??

dekraan said:
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
Click to expand...
Click to collapse
Ok, I just reinstalled the B137P03 version from the how to install lollipop thread, and that went successful. Now going to try the update.zip! Keep you posted

Ah, now we're talking It seems to have worked. Phone is now showing 'Android is upgrading' and 'optimising app.....'
Great! It does seem strange I had to reinstall the B137SP03 rom, but that did the trick!

Allview P7-Pro Root

Hello! Is there a way to root my Allview P7 Pro? I haven't found any app/software to root it. It would be nice if someone knows how to root it. If someone need info about the phone I can write it down later. Thanks in advice

TWRP 3.0.3 for Allview P7 Pro
TWRP 3.0.3 for Allview P7 Pro (mt6737t)
Based on Android 6.0 firmware ver.P7_PRO / Fri Sep 9 08:34:39 CST 2016

jemmini said:
TWRP 3.0.3 for Allview P7 Pro (mt6737t)
Based on Android 6.0 firmware ver.P7_PRO / Fri Sep 9 08:34:39 CST 2016
Click to expand...
Click to collapse
Is this working?

GalaxyRSR said:
Is this working?
Click to expand...
Click to collapse
yes

jemmini said:
yes
Click to expand...
Click to collapse
I'll try it Thank you so much

Um...I moved it to my phone..but I cant find the files in recovery..

jemmini said:
yes
Click to expand...
Click to collapse
moved to sd card..but I cant install it..it says installation aborted :c

GalaxyRSR said:
Hello! Is there a way to root my Allview P7 Pro? I haven't found any app/software to root it. It would be nice if someone knows how to root it. If someone need info about the phone I can write it down later. Thanks in advice
Click to expand...
Click to collapse
Hi.
If someone want to root this phone Allview P7 Pro you can do it by flashing TWRP and then SuperSU.
Here is the link for TWRP: https://drive.google.com/file/d/0B3-CwjCz7AuhdmRCR01TcHZvWkU/view?usp=drivesdk
You need to flash this with Sp flash tool http://spflashtool.com then from TWRP install Super Su https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133 and reboot.
I've rooted mine.
Good luck.

Thanks. Can I link this post in another forum? Cuz some other ppl would like to root their devices too..

GalaxyRSR said:
Thanks. Can I link this post in another forum? Cuz some other ppl would like to root their devices too..
Click to expand...
Click to collapse
Yes

Help
Can someone help me root my P7 PRO step by step? I really want to get rid to bloatware

Naicht said:
Can someone help me root my P7 PRO step by step? I really want to get rid to bloatware
Click to expand...
Click to collapse
First of all. The download the required files.
- TWRP Recovery
-Super SU
-SP Flash Tool
1) On your PC open up the Flash Tool, on the scatter select the file you have downloaded before.
(Before you proceed make sure you have enabled the Developer options by going to Settings -> About Phone -> And click the Build number until you see a little box saying that "You are now a developer". Now go back and head to advanced settings and go all the way down, where you'll see the Developer Options, go in, look for USB Debugging and turn it on.)
2)Move the Super SU zip file to your phone or SD card.
3) Now turn off your phone, click Download and connect your phone via USB cable and the process should start. A window should pop up saying Download Complete, and click OK.
4)Now disconnect your phone, press the Volume up button then the Power button until the screen lights up, then release it. The recovery should start up.
5)Now click Install and navigate to the file. The install and the interface is pretty simple so you won't have problems during it. After the installation is completed, click Reboot System and wait until the phone start up. Done!
Pls tell us if you don't understand something. (Sorry if I made a grammar mistake, but English is not my main language)
GOOD LUCK!

Nice!!!
jemmini said:
TWRP 3.0.3 for Allview P7 Pro (mt6737t)
Based on Android 6.0 firmware ver.P7_PRO / Fri Sep 9 08:34:39 CST 2016
Click to expand...
Click to collapse
ROOTED!
Many thanks my friend!
Easy peasy root method... now, let's go further, I'm mean, peoples who know what should be done, DEV people like...
Thank YOU again!!!
Klaus

I tried this twice and went with my phone to warranty 2 times. Cand someobe please tell me what have i done wrong? After installing TWRP OS stopped to boot (TWRP was working). I installed SuperSu and then the phone bricked. After some trying to restore it i ended up with the OS wiped....then i went to warranty. Is it because i installed Twrp with fastboot, i mean do i really need flash tool? Thanks in advance :3

Sketch RPG2 said:
I tried this twice and went with my phone to warranty 2 times. Cand someobe please tell me what have i done wrong? After installing TWRP OS stopped to boot (TWRP was working). I installed SuperSu and then the phone bricked. After some trying to restore it i ended up with the OS wiped....then i went to warranty. Is it because i installed Twrp with fastboot, i mean do i really need flash tool? Thanks in advance :3
Click to expand...
Click to collapse
I think it's time to try with flash tool.

panda822 said:
I think it's time to try with flash tool.
Click to expand...
Click to collapse
I FINALLY GOT IT WORKING!!!!
For those who think that their phone got bricked, listen 'ere.
After i installed TWRP phone stopped booting, it got in bootloop (i was able to get in recovery)
If this happens to you to, just install SuperSU (the exact version that is on the first page, first reply), it installs another boot image that will work. Your phone should boot properly now ( it might take up to 5 minutes to first boot, it happend to me, i got worried but it was alright).
Thank you so much, now i can finally do WHATEVER I WANT with my phone.

Hey. Is there a way to unroot the phone? I've tried to do it by unrooting within the SuperSU app but without succes.

GalaxyRSR said:
Hey. Is there a way to unroot the phone? I've tried to do it by unrooting within the SuperSU app but without succes.
Click to expand...
Click to collapse
Flash back the stock ROM

I don't have the stock ROM. Only the stock recovery..

GalaxyRSR said:
I don't have the stock ROM. Only the stock recovery..
Click to expand...
Click to collapse
https://firmwarefile.com/gionee-p7

Unbrick needed

Hi,
I need your help: I might have bricked my Mate 9 while trying to root it. Right now it makes a boot loop. I still have access to TWRP:
I already WIPED the phone with TWRP (all apart from the Systempartition) but I'm still out of luck.
I downloaded the current firmware (FULL) and extracted the update.app, copied it into a "dload" folder on my SDCARD but I get a "Software install failed" after 5% from the HUAWEI updater tool (which opens when pressing VolumeDown while booting). I tried it with bootloader unlocked and relocked.
I really hope you guys have another idea!
Thanks a lot!
Cheers,
quicky

Extract update.app with huawei extractor, and flash system, recovery, boot.img with fastboot.

gm007 said:
Extract update.app with huawei extractor, and flash system, recovery, boot.img with fastboot.
Click to expand...
Click to collapse
Thanks for the feedback. I HEARD that the new filesystem of the Mate9 renders the phone with that process. As you can see I'm a noob, I just wanted to ask if anybody was succesful with HuaweiExtractor on the Mate9

Also fastboot flashing method not working
Phone bootloap

So that means it's bricked? I just made a donation for "Funky Huawei" hoping that this solution will let me flash it back to normal. But I start running out of ideas.
Any other options?

Just to let you all know: I tried FunkyHuawei and I was able to recover my Mate9! Everything is working fine again.

quicky said:
Just to let you all know: I tried FunkyHuawei and I was able to recover my Mate9! Everything is working fine again.
Click to expand...
Click to collapse
Good to hear! Enjoy

quicky said:
Just to let you all know: I tried FunkyHuawei and I was able to recover my Mate9! Everything is working fine again.
Click to expand...
Click to collapse
how to recover it .. my case same as you
my mate 9 brick
thanks before
Update : im using Funkyhuawei methode, Problem solved.

Need help to relock bootloader stock mate 9 usa
Anyone has the stock rom for the mate 9 USA version I want to relock bootloader. Thanks

Moenasser34 said:
Anyone has the stock rom for the mate 9 USA version I want to relock bootloader. Thanks
Click to expand...
Click to collapse
Just reunlock from ADB

[Recovery]TWRP for the Galaxy C7 [SM-C7000]

TWRP has come to the SM-C7000!
In order to install this, follow these instructions:
Enable OEM Unlock in developer settings
Enter download mode (Press and hold home + volDown + Power when powered off)
Using Odin, click the 'AP' tab and select the recovery.tar file you've downloaded.
Flash the TWRP image, then hold home + volUp + Power
Congratulations, you are now booted into TWRP!
Remember, on the stock ROM, dm-verity is enabled. What does this mean? If you swipe to allow system modifications, you must flash something that disables dm-verity (such as magisk or a dm-verity disabler.)
Also, on the stock ROM, you MUST format /data before performing any actions, due to the fact that it is force-encrypted by default.
BUGS:
None, as far as I'm aware of.
https://drive.google.com/file/d/1fQRIR_fa7MaHTIT-4ta13477mo-Ir-Ey/view
XDA:DevDB Information
TWRP for c7ltechn, Tool/Utility for the Samsung Galaxy C7
Contributors
wzedlare and minz1
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Created 2017-10-07
Last Updated 2018-01-04

Thank you very much @wzedlare..
TWRP Recovery for Samsung Galaxy C7 (SM-C7000) was being waited by lots of C7 owners. We hope you fix all the issues and make it a flawless file. You can also collaborate with @javad0644 to make it even better.. He had developed a root file for C7 before..
Keep up this good work..
(Note: Except the first two pictures in the OP you have uploaded, the other pictures are broken. We can't see them. Can you please upload them again?)

lawyer_06 said:
Thank you very much @wzedlare..
TWRP Recovery for Samsung Galaxy C7 (SM-C7000) was being waiting by lots of C7 owners. We hope you fix all the issues and make it a flawless file. You can also collaborate with @javad0644 to make it even better.. He had developed a root file for C7 before..
Keep up this good work..
(Note: Except the first two pictures in the OP you have uploaded, the other pictures are broken. We can't see them. Can you please upload them again?)
Click to expand...
Click to collapse
Thanks.I have already been in contact with javad.There are only 2 pictures, there are no other pictures in the thread.

Build 14.10.2017:
Code:
* MTP issue is fixed.You can use MTP now.

Hello excelent work
thanks for work, Thank you very much, excellent work thanks to people like you, we can enjoy new things in our device, thank you very much, a hug and if I can in any way contribute to the creation of a personalized Rom, or send some money to q you think it would be exceptional of you

thank you very much bro , hope you create some bigger works like custom roms. ?
---------- Post added at 06:09 PM ---------- Previous post was at 05:29 PM ----------
hey guys help me i cant take a backup
it cant read the memory at all

Rkd2000 said:
thank you very much bro , hope you create some bigger works like custom roms.
---------- Post added at 06:09 PM ---------- Previous post was at 05:29 PM ----------
hey guys help me i cant take a backup
it cant read the memory at all
Click to expand...
Click to collapse
Because your data is encrypted.Please read the whole thread.

wzedlare said:
Because your data is encrypted.Please read the whole thread.
Click to expand...
Click to collapse
Can you explain for me how can i solve it please

Rkd2000 said:
Can you explain for me how can i solve it please
Click to expand...
Click to collapse
its can not be fix for now...

Costom rom
Thanks for this hard work
I haven't used this method yet
I'm really waiting for a stable costom rom based on lineage os ??

installed on my c7
i have installed on my c7000 hongkong firmware model. flashed with twrp with auto reboot off. restarted into twrp ,swipe to allow modification but it failed to mount storage. then i did factory reset in twrp and type yes. it removed all the data after that it asked me to install twrp and reboot. (it gives you options in twrp upon factory reset) did that and rebooted again in twrp . this time every thing is working good. mounted storage . after that put the supersu zip file on mobile via usb cable and installed through twrp install option then i installed (no-verity-opt-encrypt-3.1.zip) i dont know is it necessary or not but i installed it . rebooted now my mobile is rooted and twrp recovery is working fine.
only problem i got is that private mode is not working now. xD
thanks for making twrp to work :good:

koolguy0000 said:
i have installed on my c7000 hongkong firmware model. flashed with twrp with auto reboot off. restarted into twrp ,swipe to allow modification but it failed to mount storage. then i did factory reset in twrp and type yes. it removed all the data after that it asked me to install twrp and reboot. (it gives you options in twrp upon factory reset) did that and rebooted again in twrp . this time every thing is working good. mounted storage . after that put the supersu zip file on mobile via usb cable and installed through twrp install option then i installed (no-verity-opt-encrypt-3.1.zip) i dont know is it necessary or not but i installed it . rebooted now my mobile is rooted and twrp recovery is working fine.
only problem i got is that private mode is not working now. xD
thanks for making twrp to work :good:
Click to expand...
Click to collapse
So you can use your data even if you reboot to system? I tried verity zip but it didnt work for me(stock rom still encrypted my data).It is just weird, maybe supersu zip made it possible.

wzedlare said:
So you can use your data even if you reboot to system? I tried verity zip but it didnt work for me(stock rom still encrypted my data).It is just weird, maybe supersu zip made it possible.
Click to expand...
Click to collapse
i did the whole method in twrp . after wiping my data mounting storage started working. if you connect mobile to computer via usb (when you are in twrp recovery) the computer will show you your mobile drive so u can put zip files.
i can send you the files if u want them.

koolguy0000 said:
i did the whole method in twrp . after wiping my data mounting storage started working. if you connect mobile to computer via usb (when you are in twrp recovery) the computer will show you your mobile drive so u can put zip files.
i can send you the files if u want them.
Click to expand...
Click to collapse
I know about mtp(I tried it as I'm the dev.I just couldnt disable verity, please send your supersu and verity zips from pm and I will also try them in my spare time, thanks.

Any solution bro? i hope in you to fix it

Request For Galaxy C7 Pro TWRP Recovery
Dear Sir Kindly Upload TWRP Recovery For Samsung Galaxy C7 (SM-C7010).

Twrp for android 7 with default Hong Kong Rom
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?

Parsa1996 said:
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Click to expand...
Click to collapse
Hi no DO NOT use this TWRP on china rom

Google play
Parsa1996 said:
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Click to expand...
Click to collapse
hello if you are still trying to find a way to ut the play store in the china rom of android 7...here is a apk for installing google play http://itechify.com/2016/11/10/download-google-installer-apk-chinese-phones/

JohnnyMwanza said:
hello if you are still trying to find a way to ut the play store in the china rom of android 7...here is a apk for installing google play http://itechify.com/2016/11/10/download-google-installer-apk-chinese-phones/
Click to expand...
Click to collapse
Hi DO NOT use THIS app DIDNT WORKS

Help to flash ULEFONE S8 PRO GOLD

Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you

mfonemaello said:
Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you
Click to expand...
Click to collapse
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too

thxs Klima i fixed
Klima1123 said:
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too
Click to expand...
Click to collapse
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?

mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
I've heard about it, but I didn't noticed nothing strange coming from the app, I'll scan it with avast, if he finds something, I'll deleted him, my phone does have root
---------- Post added at 01:50 PM ---------- Previous post was at 01:41 PM ----------
Hey guy, I'm trying to port lineage os 14 & 15 to the S8 Pro, do you have experience with twrp, flash etc.? You could help with being my beta tester, next I'll put some betas on android file host, and make a forum here on XDA for the phone

Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?

4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
I have found it on 4pda.
Just google ulefone s8 pro 4pda.
You need to let translate by google, because of different language.

4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root

Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?

Klima1123 said:
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root
Click to expand...
Click to collapse
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.

4ndyroid said:
Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?
Click to expand...
Click to collapse
Something like this has happened to me too. Boot your phone on twrp then select the option 'Wipe', then "Format data", my phone only booted up after I did this
---------- Post added at 04:41 PM ---------- Previous post was at 04:36 PM ----------
mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
In the sound recorder I didnt find nothing, but the app GYBeautySnap aka BeautyMakeup open some annoyng processes (that consumes about 40mb of ram) that has something like ads, I think he is the real virus

Tried wiping then 'format system', still didn't work, stays stuck at the boot logo, bit thanks for the help anyway.

It rebootq only to a green TWRP!

Touf344 said:
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.
Click to expand...
Click to collapse
My phone use V3.01 firmware and it's worked

Klima1123 said:
My phone use V3.01 firmware and it's worked
Click to expand...
Click to collapse
What was the process you used?

4ndyroid said:
What was the process you used?
Click to expand...
Click to collapse
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment noverity.zip

Klima1123 said:
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment 4460246
Click to expand...
Click to collapse
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?

4ndyroid said:
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?
Click to expand...
Click to collapse
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip

Klima1123 said:
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip
Click to expand...
Click to collapse
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway

4ndyroid said:
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway
Click to expand...
Click to collapse
which firmware version are installed on your phone? Have you tried flashing the official ROM from the ulefone site, then retried the process?

Have tried on both v3. 01 & v3. 03 firmwares. Stock firmware wasn't downloaded directly from ulefone site, imagine it will be the same but will give it a go.