[Honor 6+] vendor/country for EU. - Honor 6, 6 Plus Q&A, Help & Troubleshooting

In my phone rom China, vendor/country "not exist"
Can someone tell me vendor/country for EU? to flash rom B331 EU
I know only following country. Procedure
Step 1: First of all, find out your current vendor/country info. One way to do this is by dialing *#*#2846579#*#* – from the menu that pops up go to Network Information > Vendor/Country Info. Some country:
hw/spcseas – Malaysia
unicomelectric/cn – China
hw/meafnaf – Pakistan
mts/by – Belarus

Install attached file inside a custom recovery (CWM or TWRP).

Thank you so much!

I have a china rom now with oeminfo cn.
I would like to setup a oeminfo eu (I got it - above) to install Eu 571 rom Android MM
I neeed (I believe...)
- place oeminfo eu on oeminfo cn (overwrite?)
- root
- custom recovery
For root and custom rec can anyone help my step by step?
Thanks

Related

HUAWEI CHINESE VERSION Model: PE-TL10 Product ID: 2014CP4716

Hi i own a HUAWEI honor that i believe is a Chinese version Model: PE-TL10 Product ID: 2014CP4716 with rom version PE-TL10V100R001CHNC00B260 .Is there is a custom suitable for my rooted phone?
Thanks
sorry i mean custom rom
Looking for same
Did you find a soloution as i am still looking for the same
it's a Honor 6 + (plus)
This is not a Chinese version but it's the Honor 6 + (honor 6 plus in other countries)
You can rebrand it (change the region).
At this time : Custom Recovery & Root are available
I find 1 custom rom here http://www.htcmania.com/showthread.php?t=1074633 But not tested by myself.
My solution
I've tried many solutions for rooting my PE TL10 HONOR 6 PLUS,
EMUI 3.1 (5.1 Lolipop )
The only one working with stock recovery : Kingroot apk (not working With PC software use directly the apk !)
:victory::victory: I found a EMUI 3.1 compatible TWRP :victory::victory:
You can find it here : http://www.htcmania.com/showthread.php?t=1052636
I't working fine !
You need a unlocked bootloader, put your phone on fastboot mode and launch the .Bat ! (you can also take the .IMG file and flash it with your own way).

BooLoader "relock no work" and Update no Work

Hi guys on my Honor 8 model Number of Series: FRD-L09C432B360 then model FRD-L09 and Firmware B360 i have the bootloader unlocked and i can not stop blocking it and i need it because it does not receive any more OTA updates and because i wanted to send it to assistance seen that I still have the valid guarantee and is giving me trouble.
I've already tried with 'fastboot oem relock [MyCode] ' but the command fails!
I'm trying in every way to upgrade the firmware through the process of inserting one into the dload folder on an external sd but part and then stops and so does nothing!
Please help me!
Hi all now i have B389 using this guide :
Normal update dload/update.app [Main firmware file]
Copy required vendor pack Example : [/dload/venrod/update_****_hw_eu.app] after rename the file in update.app
Update dload/update.app [Required vendor file]
Manually reset
Retry Normal update dload/update.app [Main firmware file]
Enjoy
Service repair firmware [ Скачать / Download ]
File: FRD-L09 C432B389 Italy France Poland Germany Android 7.0 EMUI 5.0
Model: FRD-L09
Build Number: C432B389
Vendor: [ hw/eu ]
Country: [ Italy France Poland Germany ]
But my bootloader is lock pls help me

Huawei Honor 6A [DLI-**] TWRP ROOT FIRMWAREs RECOVERY OEMINFO

Required OEMINFO files for switching between firmware.
If you can post on the forum your OEMINFO.
Download Huawei Honor 6A DLI-xxx TWRP 3.2.1 Orifinal Recovery ROOT
Unlock Bootloader
Install TWRP 3.2.1
Flash SuperSU-Honor 6A.zip
Download and unpack DLI-BAT-BLOCK-INSTRUCTION.rar
Open CMD
Run ADB Shell
Сonfirm the right phone screen
Run SU
When accessed # -> Run "BACKUP BLOCK.bat"
OEMINFO
DLI-L22 C432 hw/eu Delhi-L22
DLI-L42 C432 hw/eu Delhi-L42
DLI-TL20S C10 hw/ru Delhi-TL20S
DLI-AL10 C00 all/cn Delhi-AL10
TWRP + ROOT + STOCK RECOVERY:
TWRP 3.2.1 + ROOT + RECOVERY
EMUI 5.1 GMS CORE GOOGLE :
[ Скачать / Download ] - GmsCore-EMUI-5.1-NEW2018-ANDROIDHOST.RU.rar
*******************************************************************************************
[ Download ] Huawei Delhi AL10 DLI AL10 C00B160 all cn China 7.0 5.1 Factory Stock Firmware Update
[ Download ] Huawei Delhi AL10 DLI AL10 C00B151 all cn China 7.0 5.1 Factory Stock Firmware Update.rar
[ Download ] Huawei-Delhi-L42 DLI-L42 C675B121 India Service Full Factory Stock Firmware
[ Download ] Huawei Delhi TL20R DLI TL20S C10B121 hw ru Russia 7.0 5.1 Factory Stock Firmware Update.rar
[ Download ] Huawei Delhi TL20R DLI TL20S C10B104 hw ru Russia 7.0 5.1 Factory Stock Firmware Update.rar
[ Download ] Huawei Delhi L42 DLI L42 C432B104 hw eu Europe Italy 7.0 5.1 Factory Stock Firmware Update.rar
[ Download ] Huawei Delhi L22 DLI L22 C432B106 hw eu UK 7.0 5.1 Factory Stock Firmware Update.ra
[ Download ] Huawei Delhi L42 DLI L42 C636B121 hw spcseas Malaysia 7.0 5.1 Factory Stock Firmware Update.rar
[ Download ] Huawei Delhi L42 DLI L42 C672B121 hw in India 7.0 5.1 Factory Stock Firmware Update.rar
Repair Unbrick DLI-AL10/DLI-L22/DLI-L42/DLI-TL20
[ Download ] HUAWEI-DLI-AL10_TL2-0_L22_L42_9008-UNBRICK-QCOMDLOADER-FLASH-FIRMWARE.rar
Note: instruction
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Required OEMINFO files for switching between firmware.
If you can post on the forum your OEMINFO.
Any way to get only the boot.IMG for the L22?
(Only have acess to mobile data,and 2GB is a lot)
Ricardo_223 said:
Any way to get only the boot.IMG for the L22?
(Only have acess to mobile data,and 2GB is a lot)
Click to expand...
Click to collapse
unpack Huawei Delhi L22 DLI L22 C432B106 hw eu UK 7.0 5.1 Factory Stock Firmware Update.rar
and extract boot -> flash fastboot?
5261979 said:
unpack Huawei Delhi L22 DLI L22 C432B106 hw eu UK 7.0 5.1 Factory Stock Firmware Update.rar
and extract boot -> flash fastboot?
Click to expand...
Click to collapse
Sorry, what i meant was it you coupd upload the boot.IMG only, since i lack the possibility to download the RAR archivr
Need help for honor 5c pro launched in saudi, (honor holly4 in india)
I had found some useful content on your post [ Download ] Huawei Delhi L42 DLI L42 C672B121 hw in India 7.0 5.1 Factory Stock Firmware Update.rar
want to install indian version Os in this honor 5c pro (rebranding).
My current version is dLI-L42
build number Delhi-L42C185B121
but latest version available on givemerom.com/dli-l42 is Delhi-L42_C675B121_Firmware_India
https://givemerom.com/dli-l42-honor-holly-4
Does above rom compatible with my phone, Need instructions for installation.
Also, when I downloaded the stock rom for Honor 6A DLI-L22, I founded out that there are two .app files. Also, when I tried to use Huawei Extractor I found out that I cannot extract these .app files. Also, I tried to flash (using dload method and sd card) one of these files (the file was 1.5GB size), it did not work.
So I cannot extract and flash these files. Any clue?
Thank You
Did anyone test this unoffical twrp and magisk or supersu for DLI-L22 ?
Hello, I have DLI-L42, Ive unlocked the bootloader and flashed twrp successfully but after flashing any supersu or magisk zip the phone boots without root, what can I do ?
Downloaded the twrp recovery and flashed it, it says it was successful, however when i boot into recovery, it is still the default emui recovery and not twrp. Anyone nows how to fix it?
5261979 said:
Required OEMINFO files for switching between firmware.
If you can post on the forum your OEMINFO.
Download Huawei Honor 6A DLI-xxx TWRP 3.2.1 Orifinal Recovery ROOT
Unlock Bootloader
Install TWRP 3.2.1
Flash SuperSU-Honor 6A.zip
Download and unpack DLI-BAT-BLOCK-INSTRUCTION.rar
Open CMD
Run ADB Shell
Сonfirm the right phone screen
Run SU
When accessed # -> Run "BACKUP BLOCK.bat"
OEMINFO
DLI-L22 C432 hw/eu Delhi-L22
DLI-L42 C432 hw/eu Delhi-L42
DLI-TL20S C10 hw/ru Delhi-TL20S
DLI-AL10 C00 all/cn Delhi-AL10
TWRP + ROOT + STOCK RECOVERY:
TWRP 3.2.1 + ROOT + RECOVERY
EMUI 5.1 GMS CORE GOOGLE :
[ Скачать / Download ] - GmsCore-EMUI-5.1-NEW2018-ANDROIDHOST.RU.rar
*******************************************************************************************
[ Download ] Huawei Delhi AL10 DLI AL10 C00B160 all cn China 7.0 5.1 Factory Stock Firmware Update
[ Download ] Huawei Delhi AL10 DLI AL10 C00B151 all cn China 7.0 5.1 Factory Stock Firmware Update.rar
[ Download ] Huawei-Delhi-L42 DLI-L42 C675B121 India Service Full Factory Stock Firmware
[ Download ] Huawei Delhi TL20R DLI TL20S C10B121 hw ru Russia 7.0 5.1 Factory Stock Firmware Update.rar
[ Download ] Huawei Delhi TL20R DLI TL20S C10B104 hw ru Russia 7.0 5.1 Factory Stock Firmware Update.rar
[ Download ] Huawei Delhi L42 DLI L42 C432B104 hw eu Europe Italy 7.0 5.1 Factory Stock Firmware Update.rar
[ Download ] Huawei Delhi L22 DLI L22 C432B106 hw eu UK 7.0 5.1 Factory Stock Firmware Update.ra
[ Download ] Huawei Delhi L42 DLI L42 C636B121 hw spcseas Malaysia 7.0 5.1 Factory Stock Firmware Update.rar
[ Download ] Huawei Delhi L42 DLI L42 C672B121 hw in India 7.0 5.1 Factory Stock Firmware Update.rar
Repair Unbrick DLI-AL10/DLI-L22/DLI-L42/DLI-TL20
[ Download ] HUAWEI-DLI-AL10_TL2-0_L22_L42_9008-UNBRICK-QCOMDLOADER-FLASH-FIRMWARE.rar
Note: instruction
Click to expand...
Click to collapse
There is no update package the full firmware is two firmware and no update package.
dload method not working because there is no update package meaning this is plain impossible to flash on a phone
oeminfo for spanish HONOR 6A
Phone was updated at the time of this extraction, 10 minutes ago.
I hope this file could help other ppl.
http://androidhost.ru/5Fb
cheers,
Alister
PS: Just to be clear, it's L22 HW EU
I have factory reset my DLI-L22 with TWRP without making a backup (my bad I know)
That has caused my phone to be unusable, only the back/home/recent apps button show up when booting up, the rest of the screen is black, so I assume android is gone from my phone pretty much.
How would I go about flashing one of the firmwares from this thread onto my phone to make it usable again, knowing that I can't access android features themselves but have TWRP access.
I beg for someone to help me, as my phone is unusable.
Yuuteru said:
I have factory reset my DLI-L22 with TWRP without making a backup (my bad I know)
That has caused my phone to be unusable, only the back/home/recent apps button show up when booting up, the rest of the screen is black, so I assume android is gone from my phone pretty much.
How would I go about flashing one of the firmwares from this thread onto my phone to make it usable again, knowing that I can't access android features themselves but have TWRP access.
I beg for someone to help me, as my phone is unusable.
Click to expand...
Click to collapse
Hi,
AFAIK, you are forced to open the smartphone ("torx" #2 tool needed) and flash directly to the phone using specific software indicated in the first post.
Hi guys...I finally managed to root Huawei Honor 6A Pro (DLI-L42) model by using Magisk Manager via boot.img patch. Really damn works!
Here's how I'm do it:
1. Unlock the bootloader.
2. Flash TWRP and access it.
3. Try to wipe the data to remove the encryption and reboot to TWRP when prompted. If fails, try with other TWRP recovery.
4. Perform a full nandroid backup to grab all of its rom image files from the device and transfer it into your PC.
5. Rename boot.emmc.win to boot.img
6. Unpack boot.img using bootimg.exe
7. Edit default.prop file and adjust the properties of the line like this:
ro.secure=0
security.perf_harden=0
ro.adb.secure=0
ro.debuggable=1
8. Repack it back after editing default.prop.
9. Instal Magisk Manager and transfer the boot-new.img into the device.
10. Install Magisk root by applying boot patch on the boot-new.img.
11. Compress the patched_boot.img as zip or 7z etc. to allow boot image file to be transfer out from the device.
12. Enter the bootloader and flashed the patched_boot.img and reboot.
13. Voila!
---------- Post added at 02:26 PM ---------- Previous post was at 01:49 PM ----------
DerEngel said:
Downloaded the twrp recovery and flashed it, it says it was successful, however when i boot into recovery, it is still the default emui recovery and not twrp. Anyone nows how to fix it?
Click to expand...
Click to collapse
Did you unlock the bootloader first? If not, try to unlock the bootloader with getting its unlock code first by visiting EMUI site and register it. Then, you will need to key-in the phone serial number and IMEI and etc given in order to accessing the unlock code. Then use the unlock code to unlock the bootloader.
---------- Post added at 02:30 PM ---------- Previous post was at 02:26 PM ----------
deadwolf666 said:
Hello, I have DLI-L42, Ive unlocked the bootloader and flashed twrp successfully but after flashing any supersu or magisk zip the phone boots without root, what can I do ?
Click to expand...
Click to collapse
I'm just found a way on rooting this model by flashing root-patched boot.img file. Will post on other thread soon.
For those who are using Honor 6A Pro DLI-L42 model, please check this thread below here on how to rooting the device:
https://forum.xda-developers.com/honor-6/development/rom-honor-6a-pro-dli-l42-root-patched-t3768368
amirzaim said:
Hi guys...I finally managed to root Huawei Honor 6A Pro (DLI-L42) model by using Magisk Manager via boot.img patch. Really damn works!
Here's how I'm do it:
1. Unlock the bootloader.
2. Flash TWRP and access it.
3. Try to wipe the data to remove the encryption and reboot to TWRP when prompted. If fails, try with other TWRP recovery.
Click to expand...
Click to collapse
My bootloader is unlocked.
Which TWRP did you use? I did tried it using the one OP posted. I flashed it with fastboot and it says it was successful. However if i reboot into recovery, it is the default EMUI one. Im using DLI-L22, EMUI 5.1, Honor 6A, Android 7 and BuildNumber is: Delhi-L22C432B126.
Regards, Vincent
DerEngel said:
My bootloader is unlocked.
Which TWRP did you use? I did tried it using the one OP posted. I flashed it with fastboot and it says it was successful. However if i reboot into recovery, it is the default EMUI one. Im using DLI-L22, EMUI 5.1, Honor 6A, Android 7 and BuildNumber is: Delhi-L22C432B126.
Regards, Vincent
Click to expand...
Click to collapse
Well, I'm using this one, TWRP version 3.1.1, able to boot to custom recovery. After flashing, please run command "adb reboot recovery" to boot into TWRP.
http://www.mediafire.com/file/gflkv6yiy5qm5m3/Honor_6A_XN_Logos.zip
amirzaim said:
Well, I'm using this one, TWRP version 3.1.1, able to boot to custom recovery. After flashing, please run command "adb reboot recovery" to boot into TWRP.
http://www.mediafire.com/file/gflkv6yiy5qm5m3/Honor_6A_XN_Logos.zip
Click to expand...
Click to collapse
Thanks!
This version of TWRP did work! I flashed it and shut down my phone afterwards to then boot into TWRP directly press power + volume up and down, since adb does not work while in bootloader/flashboot mode.
Afterwards i installed Magisk 16.0 using TWRP.
can someone give me pls the stock rom for Delhi-L22C432B126? i effed something up and now magisk has safetynet and basicintegrity false.. tried everything to fix this now i wanna start over but idk what to do with those .APP files.
i read somewhere that the boot.img is enough to reflash (if anyone can confirm that and maybe give me a download link?)
thx in advance :/

what model is it?

My Mate 8 was bought from Wondamobile, in HK.
It is the International version (4gb/64gb)
This is the informations I got on their invoice:
HUAWEI ASCEND MATE 8 INTERNATIONAL VERSION 32/64GB DUAL LTE MOBILE PHONE (NXT-L29) UNLOCKED AND SIM FREE
SKU: HAWINXTL29064BRZ
Know it has installed the rom NXT-L29 C432B581
However I suspect that is accepted C432 ROM after som flashing and reflashing. It is rooted and has bootloader unlocked but I never rebranded it properly.
Original model should be C636 or C185? What do you think?
Thanks for any help
hi
I think it's a C636 region because it comes from Hongkong
ango81 said:
hi
I think it's a C636 region because it comes from Hongkong
Click to expand...
Click to collapse
Thanks
Maybe I try to flash a C636 rom from Funky. Flashing attempt for C432 got failled
pasil.pt said:
Thanks
Maybe I try to flash a C636 rom from Funky. Flashing attempt for C432 got failled
Click to expand...
Click to collapse
Flashing C636 Rom from Funky site also failled
Another strange issue: I made a TWRP Backup and folder name was "...NRD90M Test keys..."
I sincerely believe that although phone info refers EMUI 5.01 my system must be some hybrid of diferent roms...but aparently working well
hi
you can verify your area
In dialer * # * # 2846579 # * # * Enter and then 3 - Network Information and then on 4 - Vendor Country Info
Cust eu = C432 - Europe
Cust specseas = C636 - Asie
do wipe data before new installation
to install from twrp take this in Firmwarefinder
NXT-L09C636B563 FullOTA-MF-PV
then update ota from the phone
ango81 said:
hi
you can verify your area
In dialer * # * # 2846579 # * # * Enter and then 3 - Network Information and then on 4 - Vendor Country Info
Cust eu = C432 - Europe
Cust specseas = C636 - Asie
do wipe data before new installation
to install from twrp take this in Firmwarefinder
NXT-L09C636B563 FullOTA-MF-PV
then update ota from the phone
Click to expand...
Click to collapse
Many thanks!
But mine is L29. Which ri«om should I instal?
Hi
must take for an installation from twrp
NXT-L29C636B563 FullOTA-MF-PV
then update from the phone to get the latest version
(for install from twrp it is necessary FullOTA-MF-PV)
ango81 said:
Hi
must take for an installation from twrp
NXT-L29C636B563 FullOTA-MF-PV
then update from the phone to get the latest version
(for install from twrp it is necessary FullOTA-MF-PV)
Click to expand...
Click to collapse
Hi
many thanks again!

Rebranding to FRD-L19/L09

Hi guys!
Mine is an original AL10 (bought from China). I want to rebrand it to L09/L19, I tried flashing FRD-L09C432B562 firmware but it doesn't work (I tried HuRUpdater, dload, Redlotus method), it's probably because I didn't flash the custom vendor img first. Previously I used Huawei Mutli-tool v7 (a year ago or so) to rebrand my phone but the latest v8 doesn't have an option for rebranding.
So, what should I do?
SirDarknight said:
Hi guys!
Mine is an original AL10 (bought from China). I want to rebrand it to L09/L19, I tried flashing FRD-L09C432B562 firmware but it doesn't work (I tried HuRUpdater, dload, Redlotus method), it's probably because I didn't flash the custom vendor img first. Previously I used Huawei Mutli-tool v7 (a year ago or so) to rebrand my phone but the latest v8 doesn't have an option for rebranding.
So, what should I do?
Click to expand...
Click to collapse
Hello!
If you have AL10, I advise you to rebrand it to L19.
Here is FRD-L19C432 "oeminfo" / "custom.bin" zip to flash via TWRP => https://mega.nz/#!XAET1YAD!JijwucQVNinMa-kBhUIEUUTFbRL-HcwqZsYxTntkMFM
Then use HuRUpdater method to flash latest Oreo firmware.
-OR-
You can also flash this FRD-L19C432B131 (Marshmallow) zip via TWRP, oeminfo and custom vendor img file are included => https://mega.nz/#!WF1FSbyJ!JiQ1oP8k8j3PMzVtvwEIb7gkRSigS8yzJ25Ud3b095g
Then use HuRUpdater method to flash latest Oreo firmware.
EDIT: If not working, you may need to flash B360 (Nougat): B131 (Marshmallow) -> B360 (Nougat) -> B5xx (Oreo)
Info: Rebranded Honor 8 Chinese model can't use B380+ Nougat firmwares. For Oreo firmwares, I don't know...
Micdu70 said:
Hello!
If you have AL10, I advise you to rebrand it to L19.
Here is FRD-L19C432 "oeminfo" / "custom.bin" zip to flash via TWRP => https://mega.nz/#!XAET1YAD!JijwucQVNinMa-kBhUIEUUTFbRL-HcwqZsYxTntkMFM
Then use HuRUpdater method to flash latest Oreo firmware.
-OR-
You can also flash this FRD-L19C432B131 (Marshmallow) zip via TWRP, oeminfo and custom vendor img file are included => https://mega.nz/#!WF1FSbyJ!JiQ1oP8k8j3PMzVtvwEIb7gkRSigS8yzJ25Ud3b095g
Then use HuRUpdater method to flash latest Oreo firmware.
EDIT: If not working, you may need to flash B360 (Nougat): B131 (Marshmallow) -> B360 (Nougat) -> B5xx (Oreo)
Info: Rebranded Honor 8 Chinese model can't use B380+ Nougat firmwares. For Oreo firmwares, I don't know...
Click to expand...
Click to collapse
I successfully rebranded to L09C432B562, but I still can't get the Openkirin ROMs to work. If I flash the treble ROMs, my SIM slot 1 doesn't work.

Categories

Resources