Hello, i bought a chinese honor 6+ PE-TL 10,
could you help me if it's possible to flash an international ROM ?
thanks
dom152 said:
Hello, i bought a chinese honor 6+ PE-TL 10,
could you help me if it's possible to flash an international ROM ?
thanks
Click to expand...
Click to collapse
im using international rom, and flashing chinese rom...
so i think its possible for you too...
as long as you made your backup using twrp or cwm youll be fine....please made a backup first
method used
flash directly from local update
if fail, you must root your phone before you can flash
flash boot.img, recovery.img, system.img , cust.img using fastboot
you should be ok after flashing this
if bricked or cannot boot, reinstall your cwm or twrp, and install your backup
I have the same situation. I made some trials and here are the results;
I was on Chinese version B250. I udated manually to Chinese version B260 and this was successful.
I unlocked my bootloader successfully.
All trials to flash the International version B324 with Lollipop and (EMUI 3.1) have failed. I even tried with a relocked bootloader but still the same. No root or custom recovery; all stock.
Of note that I could successfully flash the International version B142 which is a Kitkat and (EMUI 3.0) but could never update to the succeeding update OTA although it is being downloaded successfully by the Huawei updater.
All flashing was through virusplus Multi-tool
These are my observations. If anyone has a better input regarding fully flashing a Chinese PE-TL10 with an International firmware with working OTA updates later on then please share it.
Thank you
Hello
I have honor 6+ pe TL10 chinese version EMUI3.1_PE - TL_10-6.1.1
how to put an international version ?
Hello
My mate 8 has rom NXT-L29C432B581, is unlocked, and has twrp 3.1.1-1 installed
Everytime i try to upgrade to B582 it fails. I already tried with several methods with no success:
- flashing the 3 zip files from twrp recovery (error 7; check write data to partition, write data error
E:unknown command)
- firmwarefinder
- funkyhuawei
Also tried to rebrand to C636 model using funfyhuawei but it failled as well
Any help?
Thanks!
pasil.pt said:
Hello
My mate 8 has rom NXT-L29C432B581, is unlocked, and has twrp 3.1.1-1 installed
Everytime i try to upgrade to B582 it fails. I already tried with several methods with no success:
- flashing the 3 zip files from twrp recovery (error 7; check write data to partition, write data error
E:unknown command)
- firmwarefinder
- funkyhuawei
Also tried to rebrand to C636 model using funfyhuawei but it failled as well
Any help?
Thanks!
Click to expand...
Click to collapse
Did you tried from system update (OTA)?
hamadazh said:
Did you tried from system update (OTA)?
Click to expand...
Click to collapse
OTA updates were never available, since I bought it.
I fear that C432 is not the original model, as C432 is for Europe and I bought it as an international model, from Ondamobile - HK.
Perhaps it was C636 or C185 and during one past upgrade C432 was installed...I am not sure.
The device is also rooted, and it is stable. Rebranding failled because bootloader is Unlocked. I think I am stuck permanently with this B581 rom
pasil.pt said:
OTA updates were never available, since I bought it.
I fear that C432 is not the original model, as C432 is for Europe and I bought it as an international model, from Ondamobile - HK.
Perhaps it was C636 or C185 and during one past upgrade C432 was installed...I am not sure.
The device is also rooted, and it is stable. Rebranding failled because bootloader is Unlocked. I think I am stuck permanently with this B581 rom
Click to expand...
Click to collapse
Another strange issue: I made a TWRP Backup and folder name was "...NRD90M Teste keys..."
I sincerely believe my system is some hybrid of diferente roms...but aparently working well
Hi my device is Bln-L22C675 indian version I have rebranded my device to EU version by flashing eu oeminfo now my device is Bln-L21C435. now I have used rollback package for eu version downgraded to mm then again using official update upgraded to nougat.
But this eu version not supporting volte. im not getting volte. so I decided to go back to indian version by flasing IN oeminfo but every time it saying flashing eu oem. I have downloaded every indian oeminfo files on xda but the result was it flashing eu oem instead of in oem. I have wiped 5 times all partitions using elite twrp formated data but still it flashing eu oem. I tried to flash in oeminfo on emui 4&5 no use. I tried to use hauwei tool to restore my in oeminfo but the tool is not working. I tried to manually copy the indian oem from root explorer I changed cust and oem with permissions still on Bln-L22.
Anyone can tell me a way that I have didn't tried to solve this problem.
Solved! after a long google search I found a tool SRKT tool which is for honor 7&8,p9 lite but there is no honor 6x model. so I chooses honor p9 lite and applied asia oem file after reboot and factory rest my device name changed to some onxy A180 a15generic device.
now I have tried another way. I have downloaded oem file l22c675b340 and custom bin from xda and kept them in restore oem and custombin. I have extracted oem file there. now connected the device attempted to restore and it was success. now my device showing l22 after reset. then flashed l22c675b340 firmware. now I got an update for volte for all networks. for reset I have used elite rom.
Plz can anyone help me debranding my Bln-L21?
MAK7246 said:
Plz can anyone help me debranding my Bln-L21?
Click to expand...
Click to collapse
[Guide] Debranding to India variant BLN-L22 (successful case)- Noob Friendly
Update- Please flash the OEMINFO and Custom bin from - https://mega.nz/#!qYtlzawK!Ab86GUO40JpUZ8scGnaIszhA-3gf6bN4NdfuHb8IeBU via TWRP and then flash the B340 update.app file from download section via dload method. if you face any issue, follow...
forum.xda-developers.com
read also the lasts posts
Bro My one is Bln-l21 which rom should I debrand to can anyone give me link for the firmware?
MAK7246 said:
Bro My one is Bln-l21 which rom should I debrand to can anyone give me link for the firmware?
Click to expand...
Click to collapse
Follow this post:
[Guide] Debranding to India variant BLN-L22 (successful case)- Noob Friendly
Update- Please flash the OEMINFO and Custom bin from - https://mega.nz/#!qYtlzawK!Ab86GUO40JpUZ8scGnaIszhA-3gf6bN4NdfuHb8IeBU via TWRP and then flash the B340 update.app file from download section via dload method. if you face any issue, follow...
forum.xda-developers.com
the B340 update.app link is in the one right after.
If you don't have/know about TWRP recovery:
[GUIDE] Root Huawei Honor 6X and install TWRP custom recovery (EMUI 5.X)
Note- Applicable for Windows 7, Windows 8 and Windows 10 Similar steps are applicable for EMUI 4.X as well but TWRP file will change. Hi Folks, There are few threads but most of them are old or for EMUI 4.X and users having issues while...
forum.xda-developers.com
the unlock code for your bootloader is available throught "DC unlocker" software for 4 € .
Will my device get EMUI 8 after debrand?
MAK7246 said:
Will my device get EMUI 8 after debrand?
Click to expand...
Click to collapse
Nope, you would just have done step 2 of the following post, you also have to do step 3 then:
Thread '[HONOR 6x EMUI 8.X Oreo] Installing EMUI 8.X on Honor 6X EMUI 5.X and RAM extend via SD Card' https://forum.xda-developers.com/t/...-emui-5-x-and-ram-extend-via-sd-card.4237453/
Bro where can I get stock recovery and stock erecovery
Cause I successfully debranded!
MAK7246 said:
Bro where can I get stock recovery and stock erecovery
Cause I successfully debranded!
Click to expand...
Click to collapse
they sould be in HUawei "full" rom package. Use the soft "huawei update extractor"
Djiban said:
they sould be in HUawei "full" rom package. Use the soft "huawei update extractor"
Click to expand...
Click to collapse
Bro do u have the full emui 8 firmware for Honor 6x?
@Djiban bro my build is same though it updated to emui 8 for not having the full firmware package!Do u have the full firmware?
Bro my build no. Is still same after upgrading from emui 5.0.1 to emui 8 because of not having the full firmware.do u have the full firmware package for Emui 8 honor 6x?
MAK7246 said:
Bro my build no. Is still same after upgrading from emui 5.0.1 to emui 8 because of not having the full firmware.do u have the full firmware package for Emui 8 honor 6x?
Click to expand...
Click to collapse
ok, there is a more recent EMUI stock firmware (B520):
Honor6X-BLN-L22HNC675CUSTC675D2B520 (8.0.0.520) - Shared with pCloud
Keep all your files safe, access them on any device you own and share with just the right people. Create a free pCloud account!
e.pcloud.link
you can use https://www.dropbox.com/s/via9iigwa5q37rf/HWOTA_BLN_Eng.zip
to install it. Some infos about that here.
You should be able to use dload official update, and somehow "Huawei updater" software or "Huawei Firmware Finder" soft or app, also to instal it.
BUT ANYWAY, you should have stock recovery already with the build you install to get EMUI 8 !!! Did you check? That would be the case, after installing the above B520.
If not, look inside those B520 zip files (using "Huawei update extractor" software for update.app if I remember well, google "Huawei update extractor" for all infos), you will get recovery .img files. Flashable with Fastboot or twrp recovery.
But I thnik you are already on stock recovery, or will be after B520 update
Djiban said:
ok, there is a more recent EMUI stock firmware (B520):
Honor6X-BLN-L22HNC675CUSTC675D2B520 (8.0.0.520) - Shared with pCloud
Keep all your files safe, access them on any device you own and share with just the right people. Create a free pCloud account!
e.pcloud.link
you can use https://www.dropbox.com/s/via9iigwa5q37rf/HWOTA_BLN_Eng.zip
to install it. Some infos about that here.
You should be able to use dload official update, and somehow "Huawei updater" software or "Huawei Firmware Finder" soft or app, also to instal it.
BUT ANYWAY, you should have stock recovery already with the build you install to get EMUI 8 !!! Did you check? That would be the case, after installing the above B520.
If not, look inside those B520 zip files (using "Huawei update extractor" software for update.app if I remember well, google "Huawei update extractor" for all infos), you will get recovery .img files. Flashable with Fastboot or twrp recovery.
But I thnik you are already on stock recovery, or will be after B520 update
Click to expand...
Click to collapse
My current one is B520 just the bui
Djiban said:
ok, there is a more recent EMUI stock firmware (B520):
Honor6X-BLN-L22HNC675CUSTC675D2B520 (8.0.0.520) - Shared with pCloud
Keep all your files safe, access them on any device you own and share with just the right people. Create a free pCloud account!
e.pcloud.link
you can use https://www.dropbox.com/s/via9iigwa5q37rf/HWOTA_BLN_Eng.zip
to install it. Some infos about that here.
You should be able to use dload official update, and somehow "Huawei updater" software or "Huawei Firmware Finder" soft or app, also to instal it.
BUT ANYWAY, you should have stock recovery already with the build you install to get EMUI 8 !!! Did you check? That would be the case, after installing the above B520.
If not, look inside those B520 zip files (using "Huawei update extractor" software for update.app if I remember well, google "Huawei update extractor" for all infos), you will get recovery .img files. Flashable with Fastboot or twrp recovery.
But I thnik you are already on stock recovery, or will be after B520 update
Click to expand...
Click to collapse
Bro I updated to emui 8 using the update.zip and huru updater using howtabln the one which u have given but after updating the build number was supposed to be b520 but it remain unchanged I don't know the reason but emui was successfully updated to emui 8!
MAK7246 said:
My current one is B520 just the bui
Bro I updated to emui 8 using the update.zip and huru updater using howtabln the one which u have given but after updating the build number was supposed to be b520 but it remain unchanged I don't know the reason but emui was successfully updated to emui 8!
Click to expand...
Click to collapse
you are not on B520 obviously, install the B520 provided in my previous post. You should have stock recovery afterwards
MAK7246 said:
My current one is B520 just the bui
Bro I updated to emui 8 using the update.zip and huru updater using howtabln the one which u have given but after updating the build number was supposed to be b520 but it remain unchanged I don't know the reason but emui was successfully updated to emui 8!
Click to expand...
Click to collapse
Bro is the rom indian or Chinese?
Djiban said:
you are not on B520 obviously, install the B520 provided in my previous post. You should have stock recovery afterwards
Click to expand...
Click to collapse
@Djiban bro but the link which u have given in china variant,Indian variant does not have HNC in build number,am I right?
@Djiban can u send the screenshot of ur system info I mean build info of honor 6x!
I m getting getting package info failed in erecovery since debrand can anybody help me fix this?model bln 22 emui 8 debranded from BLN-L22.
Djiban said:
Follow this post:
[Guide] Debranding to India variant BLN-L22 (successful case)- Noob Friendly
Update- Please flash the OEMINFO and Custom bin from - https://mega.nz/#!qYtlzawK!Ab86GUO40JpUZ8scGnaIszhA-3gf6bN4NdfuHb8IeBU via TWRP and then flash the B340 update.app file from download section via dload method. if you face any issue, follow...
forum.xda-developers.com
the B340 update.app link is in the one right after.
If you don't have/know about TWRP recovery:
[GUIDE] Root Huawei Honor 6X and install TWRP custom recovery (EMUI 5.X)
Note- Applicable for Windows 7, Windows 8 and Windows 10 Similar steps are applicable for EMUI 4.X as well but TWRP file will change. Hi Folks, There are few threads but most of them are old or for EMUI 4.X and users having issues while...
forum.xda-developers.com
the unlock code for your bootloader is available throught "DC unlocker" software for 4 € .
Click to expand...
Click to collapse
Hello, I am having trouble using the DC-Unlocker software. I am trying to follow this tutorial from their official website to unlock the bootloader of my Huawei Mate 9 Lite (BLL-L23) but HiSuite does not seem to work. It shows a pop-up saying "HiSuite will be installed in your device" and then another saying "Instalation error. System version is too old". And then nothing happens, and HiSuite doesn't even recognize my phone.
I have Android 6.0 Marshmallow and I'm trying to upgrade to Android 7.0 Nougat. Also, I have EMUI 4.1.3, and if I'm not mistaken, I should be able to upgrade it to EMUI 5.0.
EDIT: HiSuite seems to have installed the drivers 'Android Adapter PCUI' and 'DBAdapter Reserved Interface' despite the error, but not the 'Android Adapter Modem #2' one, and I don't know how to install it. I'd like to know I have everything needed to proceed successfully before paying the 4.00 €.
thedolanduck said:
Hello, I am having trouble using the DC-Unlocker software. I am trying to follow this tutorial from their official website to unlock the bootloader of my Huawei Mate 9 Lite (BLL-L23) but HiSuite does not seem to work. It shows a pop-up saying "HiSuite will be installed in your device" and then another saying "Instalation error. System version is too old". And then nothing happens, and HiSuite doesn't even recognize my phone.
I have Android 6.0 Marshmallow and I'm trying to upgrade to Android 7.0 Nougat. Also, I have EMUI 4.1.3, and if I'm not mistaken, I should be able to upgrade it to EMUI 5.0.
EDIT: HiSuite seems to have installed the drivers 'Android Adapter PCUI' and 'DBAdapter Reserved Interface' despite the error, but not the 'Android Adapter Modem #2' one, and I don't know how to install it. I'd like to know I have everything needed to proceed successfully before paying the 4.00 €.
Click to expand...
Click to collapse
the tutorial you're following is the good one.
What is the OS version of your computer ? try another one!
Try also to install diectly the huwei drivers without hisuite:
Huawei_Android_USB_Driver
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Djiban said:
the tutorial you're following is the good one.
What is the OS version of your computer ? try another one!
Try also to install diectly the huwei drivers without hisuite:
Huawei_Android_USB_Driver
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Click to expand...
Click to collapse
Thank you for replying.
My PC runs on Windows 10, so I don't think that is a problem. I could try a Virtual Machine with another one though, which one do you recommend?
As for the instalation, do I have to uninstall my current drivers in order to install the ones you are providing me? Or does it not matter? I will try them ASAP.
P.S.: I found this thread in the DC-Unlocker forums of someone saying not all phones have the 'Android Adapter Modem #2' drivers and it should be possible to read the bootloader code of a Honor 6X without it (I am assuming that Mate 9 Lite == Honor 6X at this point). Should I trust this?
I apologize for the amount of questions, you just seem like an experienced person, and I thank you again for taking the time and having the patience of answering.