Hello all. I have a problem. I can not, for the life of me, figure out how to set my lock screen to 'None'. I've tried:
Disabling fingerprints and fingerprint unlock,
Disabling smart unlock and any trusted agents
Disabling and uninstalling Android Pay and Android Wallet,
Disabling NFC,
I have no VPNs
I have no administrators enabled,
I have cleared my credential storage,
powered off my phone and powered it back on
I do not have any encryption enabled
and still 'None' is grayed out with the "Disabled by Administrator, encryption policy, or credential storage" message.
I just can't think of anything else to try in order to disable the lockscreen. Can anyone please help me?:crying: Thank you for anyone help anyone can offer. I'm desparate!
You seem to have tried everything. Only thing else I can think of is I know sometimes if apps are allowed draw over others, the phone can block some security settings.
Just a suggestion, but if you go into your apps in settings and change it there, maybe it'll work
All I can suggest then is a factory reset unfortunately, I cannot think of anything else to change
Sorry I couldn't be of more help
Draw over other apps
Should I disable Draw over other apps for every app in the list or any one in particular?
Schuettais said:
Should I disable Draw over other apps for every app in the list or any one in particular?
Click to expand...
Click to collapse
I have exactly the same problem,after factory reset it s ok,but after instalation couples of apps and other stufs again is the same...i dont know where is problem...is anybody resolve this without factory reseting phone?
We have this issue on our Honor 8. It's my son's phone so I can't test possible solutions. One I read was to remove all credentials. Since I don't have the phone, I have no idea where credentials are. Another I read said to create a pattern lock and a pin emergency lock. Use the WRONG pattern 5 times or until it requires the back-up pin. Enter back-up pin then the "none" choice returned. It will be a few more weeks before I have access to the phone. If either works, please report back.
Sent from my Nexus 5X using Tapatalk
ritchea said:
We have this issue on our Honor 8. It's my son's phone so I can't test possible solutions. One I read was to remove all credentials. Since I don't have the phone, I have no idea where credentials are. Another I read said to create a pattern lock and a pin emergency lock. Use the WRONG pattern 5 times or until it requires the back-up pin. Enter back-up pin then the "none" choice returned. It will be a few more weeks before I have access to the phone. If either works, please report back.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
I once had that problem. This is what I did and it worked for me.
Ihaveatattoo said:
I once had that problem. This is what I did and it worked for me.
Click to expand...
Click to collapse
Thanks.
Sent from my Nexus 5X using Tapatalk
1 app can help u out here ( Gravity Screen ) better if have the purchased one . will never neet un unlock ur device any more =)
GD Luck .
Romiui said:
1 app can help u out here ( Gravity Screen ) better if have the purchased one . will never neet un unlock ur device any more =)
GD Luck .
Click to expand...
Click to collapse
He's talking about removing the lock screen, and he's fixed it... ?
jkccl9 said:
He's talking about removing the lock screen, and he's fixed it...
Click to expand...
Click to collapse
Try The app then Decide if any thing u done by removing is better than this app ( Try To download payed app ) .
Romiui said:
Try The app then Decide if any thing u done by removing is better than this app ( Try To download payed app ) .
Click to expand...
Click to collapse
U need to read the OP again... That isn't his problem
Related
Hello.
Well in October I have set the screen lock pattern just for fun and haven't used it till now. Now by an oversight I have activated the "Require pattern". Well to be honest I have no idea what my pattern was. Could someone tell me how to get rid of the pattern without wiping the phone or installing a backup with fastboot? I have root access and I would love to see a solution for my problem.
At the moment I have the screen timeout set to "never".
I'm looking forward reading your answers.
Regards
Ok it is easy. Just lock the phone and try the false patterns several times. Until that you will be able to log into the phone with the own google account.
are u sure its ur phone bcoz even if u dont know the unlock pattern u must be knowing the email id and its password assigned with that phone
it asks to login into ur google acc if u forgot pattern...
sangeet.003 said:
GOT MULTI-TOUCH & AUTO-ROTATE THANKS TO JESUS FREAK AND KOUSH FOR ALL THESE STUFF
ALSO THANKS TO GOOGLE & HTC FOR SUCH A GREAT PHONE
AS ANDROID IS NOT AVAILABLE IN INDIA I AM THE ONLY ONE WITH ANDROID IN MY SURROUNDING... SO ITS GREAT TO HAVE IT IN HANDS...
Click to expand...
Click to collapse
My android and I are in your surroundings
Hi,
Since two days I'm a happy and proud Note owner, but there's one thing, that makes me really go crazy:
I installed the program "Widgetlocker", because the standard lockscreen is quite broing. It actually works quite good, but sometimes the standard lockscreen still apears. Not instead of the widgetlocker, but additional. So I always have to unlock two lockscreens.
Does anybody else has got this problem? And how can I fix it?
I tried to find a solution in different forums and in the program configuration, without sucess!
Thanks for help!
Edit: The error apears mostly when there's a pop-up (gtalk e.g.) or when I plug in the charger....
I turned on root helper and home helper in settings, that fixed it for me. I'm on Stock Rooted XXKK9 if that helps.
Sent from my GT-N7000 using xda premium
I presume you have set the lock screen to "none" in the actual phone settings too?
NZtechfreak said:
I presume you have set the lock screen to "none" in the actual phone settings too?
Click to expand...
Click to collapse
Where? Can't find any option like that....
Thanks for help
Hi, chrcad,
Finally, the someone else who's been having the same problem.
It IS really irritating. Sometimes it's OK, but other times it just comes on.
Have turned off the lock screen option, but same thing happens. Someone please help!
Sent from my GT-N7000 using XDA App
NZtechfreak said:
I presume you have set the lock screen to "none" in the actual phone settings too?
Click to expand...
Click to collapse
Lol, i accidentaly hit the thanks button. You're welcome!
Sent from my HTC Desire HD using xda premium
drjp77 said:
Hi, chrcad,
Finally, the someone else who's been having the same problem.
It IS really irritating. Sometimes it's OK, but other times it just comes on.
Have turned off the lock screen option, but same thing happens. Someone please help!
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
My widgetlocker works fine. Been using it since day 1. Hmm.. Sorry. Not sure how to help.
chrcad,
Your problem seems related to the fact that Android is not having enough memory left ans simply closes "useless" apps and considers that WL is part of them. To prevent that to happen, simply check in advanced settings the "refuse to suspend WL" box and Android will look another application than WL to close
The_Steph said:
chrcad,
Your problem seems related to the fact that Android is not having enough memory left ans simply closes "useless" apps and considers that WL is part of them. To prevent that to happen, simply check in advanced settings the "refuse to suspend WL" box and Android will look another application than WL to close
Click to expand...
Click to collapse
Thanks @ everybody for the help, but unhappily it's still not working properly.
The problem always apperas, when the phone's sleeping and a gTalk message comes in.... but ONLY, when the gTalk ppop-up is activated......
Any (more) idea?
you are leaving it running all the time aren't you?
I use to have the same problem, very rarely but it was still annoying. I have put a lock on widgetlocker so if I ever close all programs, widgetlocker is still running. It's not happened since but it's only been a few days so I'll see.
chrcad said:
Edit: The error apears mostly when there's a pop-up (gtalk e.g.) or when I plug in the charger....
Click to expand...
Click to collapse
Some pop-ups cause this if they're designed to appear underneath the stock lockscreen rather than dismiss it.
For now:
1) Easy Wake Mode disables the system lockscreen
2) WL Settings > Long-press volume down for Experimental > Aggressive Dismiss stock lockscreen. This should work, but it's not well tested yet so it's off by default.
Hey,
Im looking for a solution to skip the pattern lock when Im connected with my Wifi at home.
Im running Lollipop and i DONT wanna use Androids "Trusted areas".
Hope you can help me.
Thanks so far!
Nik
Tasker?
Tasker only supports skip PIN Lock, isnt it?
Latest google play services
mr.joshuanice said:
Latest google play services
Click to expand...
Click to collapse
Did you even read the OP?
Im running Lollipop and i DONT wanna use Androids "Trusted areas".
Click to expand...
Click to collapse
mr.joshuanice said:
Latest google play services
Click to expand...
Click to collapse
So, you didnt read my post, Sir!
But I found a solution in using Llama...
It's clear I haven't read all ... Sorry for that just trying to help I'm standing on crowded train to work
4tticuz said:
Tasker only supports skip PIN Lock, isnt it?
Click to expand...
Click to collapse
With Secure Settings (and Tasker) it will do pattern lock. I am doing this. The only difference between KK and L with secure settings is you have to go into the spanner icon > Pattern unlock method [4.1+] > Lock Settings (Experimental)
rootSU said:
With Secure Settings (and Tasker) it will do pattern lock. I am doing this. The only difference between KK and L with secure settings is you have to go into the spanner icon > Pattern unlock method [4.1+] > Lock Settings (Experimental)
Click to expand...
Click to collapse
Thanks alot, will def. test this!
rootSU said:
With Secure Settings (and Tasker) it will do pattern lock. I am doing this. The only difference between KK and L with secure settings is you have to go into the spanner icon > Pattern unlock method [4.1+] > Lock Settings (Experimental)
Click to expand...
Click to collapse
+1 to this.
Its the best way to go.
jayRokk said:
+1 to this.
Its the best way to go.
Click to expand...
Click to collapse
One thing I've had a few times though, if im locked then come in range of WiFi, it is still locked and the pattern doesn't unlock it, so I've had to turn the screen off and on again
rootSU said:
One thing I've had a few times though, if im locked then come in range of WiFi, it is still locked and the pattern doesn't unlock it, so I've had to turn the screen off and on again
Click to expand...
Click to collapse
I read somewhere (can't recall where) that, that is supposed to happen. You have to unlock first with pin/pattern then it should take affect but I too have only had this happen a couple times. The rest of the times it just simply unlocks.
jayRokk said:
I read somewhere (can't recall where) that, that is supposed to happen. You have to unlock first with pin/pattern then it should take affect but I too have only had this happen a couple times. The rest of the times it just simply unlocks.
Click to expand...
Click to collapse
Hmm. With the new experimental feature you mean?
But what I mean is it is broken sometimes. Doesn't accept the pattern. It shows the pattern path as correct and just hangs there, not unlocking, until I off and on the screen.
use the new play service apk and set location
rootSU said:
Hmm. With the new experimental feature you mean?
But what I mean is it is broken sometimes. Doesn't accept the pattern. It shows the pattern path as correct and just hangs there, not unlocking, until I off and on the screen.
Click to expand...
Click to collapse
I have the same issue. Sometimes it works, sometimes it doesn't. I give up sometimes and just enter it manually.
JJsevol said:
I have the same issue. Sometimes it works, sometimes it doesn't. I give up sometimes and just enter it manually.
Click to expand...
Click to collapse
Do you have Secure Settings?
And in secure setting do you have System+ Module enabled and set up as Device Admin?
What me and @rootSU were talking about is just a, you can say a bug, where the pattern is complete but it just hangs to unlock.You can see the pattern (Which I think sucks because someone else can see if you just leave your phone on that screen) but it just stays there. You lock your phone again and upon swiping the regular slide lock, there shouldn't be any prompt anymore and it should work fine after that.
I know using Tasker alone cause a lot of error like not disabling lock screen at all and just a blank screen sometimes.
https://play.google.com/store/apps/details?id=com.benhirashima.skiplock
Works great
ChongoDroid said:
https://play.google.com/store/apps/details?id=com.benhirashima.skiplock
Works great
Click to expand...
Click to collapse
Have you tried it with lollipop? Does it work?
sorcio91 said:
Have you tried it with lollipop? Does it work?
Click to expand...
Click to collapse
I'll check right now on my n5
Edit: nope, says incompatible device on my n5.
Sorry can't test 5.0 on G3 as theirs no ROM for d852 yet.
where can I get latest Google services?
Sent from my Nexus 5
With latest firmware (G930FXXU1APD1-G930FDBT1APC5-DBT) Im having problems when unlocking the device with fingerprint. It does not allow me, but instead I get:
“Enter pin instead of using fingerprint recognition because of security policy”
And I have to use the PIN.
This happens when locking the display with “lock wedged”. If the lock is made with button (power) ... or time out display. Then I can normally use the fingerprint.
Does someone also facing the problem?
Is there any solution – setting?
Best.
D.
Yes i had this and tried to reset my fingerprints when i tried that settings error and closed, then i couldnt change anything, pin, fingerprints, couldnt even factory reset. Cause it always asked for my pin and after i entered it settings would error rebooting didnt help. Finally using android device manager from my pc i had to do an erase. My s7 is stock and it had nothing disable at the time this happen.
ducy1 said:
With latest firmware (G930FXXU1APD1-G930FDBT1APC5-DBT) Im having problems when unlocking the device with fingerprint. It does not allow me, but instead I get:
“Enter pin instead of using fingerprint recognition because of security policy”
And I have to use the PIN.
This happens when locking the display with “lock wedged”. If the lock is made with button (power) ... or time out display. Then I can normally use the fingerprint.
Does someone also facing the problem?
Is there any solution – setting?
Best.
D.
Click to expand...
Click to collapse
there might be extra Policy set on ur device.
go to setting > Security > click on Clear Credentials
+ also check what is ur device administrator
:good:
I had that even on my Nexus 6P when using Nova's double tap to lock feature. I think it's something to do with Marshmallow actually.
Sent from my SM-G930W8 using Tapatalk
Geeks Empire said:
there might be extra Policy set on ur device.
go to setting > Security > click on Clear Credentials
+ also check what is ur device administrator
:good:
Click to expand...
Click to collapse
Clear credentials is not active.
Device Admin - APP is added.
So the error is still there.
ducy1 said:
Clear credentials is not active.
Device Admin - APP is added.
So the error is still there.
Click to expand...
Click to collapse
You can try Samsung's Good Lock app from Galaxy Apps store or, if you live outside U.S., from apkmirror.com. It's a System UI update that allows fingerprint unlock with third party locking widgets.
@ avah
This actually works. But ... then I get totally different lock screen display etc... that I actually don’t like.
So ... till now ... no real solution.
Best.
Hay
Question.
Is it possible to flash the phone back to previous ROM version via Odin… and you won’t get Knox void .. or something else??
I'm thinking to go back to previous ROM when lock and fingerprint worked OK.
Best
D.
This is a duplicate of: http://forum.xda-developers.com/galaxy-s7/help/security-policy-prevents-fingerprint-t3354270
You can find details on that thread about this problem.
I'm having the same issue and I must say it is very annoying. Can't really see any reason why this should interfere with the security. Should be my choice to be honest. Would be nice to have a solution to this. Looks like it's been an issue for a long time as well. Found some threads about the 6P for example with the same issue.
Try use other app to pass that policy: https://play.google.com/store/apps/details?id=com.luutinhit.doubletapscreenoff
When using app: https://play.google.com/store/apps/details?id=com.luutinhit.doubletapscreenoff please choose check box show clear view to fix this problem.
ducy1 said:
With latest firmware (G930FXXU1APD1-G930FDBT1APC5-DBT) Im having problems when unlocking the device with fingerprint. It does not allow me, but instead I get:
“Enter pin instead of using fingerprint recognition because of security policy”
And I have to use the PIN.
This happens when locking the display with “lock wedged”. If the lock is made with button (power) ... or time out display. Then I can normally use the fingerprint.
Does someone also facing the problem?
Is there any solution – setting?
Best.
D.
Click to expand...
Click to collapse
A third-party lock screen app call 'Quick Gesture Pro' on google play may work for you
bruce88 said:
A third-party lock screen app call 'Quick Gesture Pro' on google play may work for you
Click to expand...
Click to collapse
Are you aware of that you are answering a post that is almost half a year old?
gerhard_wa said:
Are you aware of that you are answering a post that is almost half a year old?
Click to expand...
Click to collapse
Yes but the problem still remains so it was a good initiative. I've got a brand new S7 and I find this very annoying. If I switch off my screen with Nova, I have to use fingerprint+PIN Code to unlock. If I switch it with physical buttons, I only have to use fingerprints..
Fixed
Search 4 knock on app on playstore.
Instal
Tap on create icon. Turn off the rest options
Fixed by installing a third party screen locker.
Kholargol said:
Fixed by installing a third party screen locker.
Click to expand...
Click to collapse
Which one?
xavier2k3 said:
Which one?
Click to expand...
Click to collapse
Screen Lock Pro
luutinhit.1412 said:
When using app: https://play.google.com/store/apps/details?id=com.luutinhit.doubletapscreenoff please choose check box show clear view to fix this problem.
Click to expand...
Click to collapse
Your app is too many pop-up ads, so bad. I uninstall it quickly.
I just bought this phone today used but it's in perfect condition and I have tried a regular reset and also a hard reset via power and volume up when turned off and nothing I do will get the option for it to show up so that I can set it up....
Anyone else ever have this happen before Google has not been giving me any info at all.... thanks
zacholley said:
I just bought this phone today used but it's in perfect condition and I have tried a regular reset and also a hard reset via power and volume up when turned off and nothing I do will get the option for it to show up so that I can set it up....
Anyone else ever have this happen before Google has not been giving me any info at all.... thanks
Click to expand...
Click to collapse
Download the shortcut maker from playstore, run it and you can get into setting. The fingerprint id might show up in one of the settings. You can then use it through this shortcut.
Thanks for the idea I tried but it won't work still it gives an error
zacholley said:
Thanks for the idea I tried but it won't work still it gives an error
Click to expand...
Click to collapse
I tried it in my mate 8 and it works. However the fingering id is also on my settings. I wonder if some rom does not have the fingering id. You might try to update to another rom.
I just bought the phone used I think the scanner is broken so I'm going to swap or return it
zacholley said:
I just bought this phone today used but it's in perfect condition and I have tried a regular reset and also a hard reset via power and volume up when turned off and nothing I do will get the option for it to show up so that I can set it up....
Anyone else ever have this happen before Google has not been giving me any info at all.... thanks
Click to expand...
Click to collapse
What about your phone model?
NXT-L09, NXT-L29, NXT-AL10, NXT-CL00, NXT-DL00 or NXT-TL00
Mentioned on back of your phone like this image:
zacholley said:
I just bought this phone today used but it's in perfect condition and I have tried a regular reset and also a hard reset via power and volume up when turned off and nothing I do will get the option for it to show up so that I can set it up....
Anyone else ever have this happen before Google has not been giving me any info at all.... thanks
Click to expand...
Click to collapse
My fingerprint scanner disappeared from my setting about a month after I got the phone . Support was of no help. resetting phone did not work. Any Suggestions? Thank You.
You should try and flash c185b180 stock ROM, that should have all the stock settings
Sent from my HUAWEI NXT-L29 using XDA-Developers Legacy app
Its not a firmware problem. Probably ID hardware haven't connection with motherboard so it missing from settings. Open phone and CHECK EVERY TAPE. It should work because if you unmount tape from ID SCANNER and then go to settings there will be nothing about FINGERPRINT SCANNER.
This is rediciloius some of u peoples remedy , this problem is due to a kernel issue with the security , complete wipe and. Reinstall a os ....Or just try to factory reset it . I do not know why people ha
Be to be so stupid and do a run around. S
Restore factory os .
Hi. I bought a new case for my mate 8. My phone is nxt-l29c185 but the case I bought is for al10. The fingerprint sensor on the new case is not working and fingerprint id in the settings has disappeared lately. When I attached old case fingerprint sensor is working but I attached new case sensor is not working. What can I do for this problem. Is there a solution for this problem or sensor on the new case is broke.
Fingerprint id missing on my huawei p10 lite help me i cant see fingerprint options.