Related
Hello Everyone Sorry for Delay i was out of City so... thats why.. i was not able to share or update it..
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Click Here to Download UBISLATE 7C+ Stock Rom
Click here to download LiveSuit Flasher
Step by Step Guide
1. Put Your Ubislate off means complete power off
2. Run Livesuite
3. Select/Open UBI Slate stock Img File
4. Plug oneside of Data cable to computer only to computer not with Tablet (rember)
5. Now keep pressing and holding Volume up+ button and now attach data cable with tablet ( UBISLATE)
6. Now Popup of live suite will say Yes and again Yes press yes both times and ... release the volume up+ button
7. Now update will start.... wait for 5 min
8. 100% up gradation complete
:good:Now enjoy your UBISLATE ONCE AGAIN ENJOY
Enjoy Just
Uploaded or not?
What Happend Brother ,,uploading complete or not?
What a good news you got!
Now if you're telling us all truth, and this is original firmware, then this device is now un-brickable. In case of bootloop, we can go to flash mode with some pin and key combination and flash back to stock. And in case bootloader failed to load (hard brick), this device automatically goes to flash mode (kinda fail safe) and we can get back our working device. This is all because of Allwinner A13 board. It's not a work of Datawind.
Another thing is that, I can start development, because I know there way to recover back.
I hope you really got the firmware and you'll upload it soon.
Thank you.
Hello Friends for those with stuck on android n forgotten password
TRY >> http://j.gs/205J
it helped me
n please comment if it helps u to
ENJOY
ubislate 7c + rom
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks
ahirwar said:
Where is your upload man???
Have you uploaded or not?
I got same problem, device is not booting only datawind logo
on the screen. I told about it to datawind, they said that they
Will send me link for rom zip, I asked "device is not booting then
How to possible to insert zip file into device "
they told " card should be formatted where zip pasted, then you
Can use that file "
But they didn't send me any mail in 24 hours.
Info for developer .....thanks
Click to expand...
Click to collapse
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *
fkardame said:
yea there are 2 way for flashing
one is flashing using livesuite (this is flashed with fone off-in download mode)
second is by recovery software
just do as instructed in my link or wait for the datawind to send u the file n flash it using livesuite
*NOTE* u should know that tab can connect to pc when the tab is stuck on loading image *
Click to expand...
Click to collapse
Have you got any rom for ubislate 7c + ???
If you have .... where is it?
ahirwar said:
Have you got any rom for ubislate 7c + ???
If you have .... where is it?
Click to expand...
Click to collapse
as i said go to this link >>> http://j.gs/205J
n read it n do as it says
fkardame said:
as i said go to this link >>> http://j.gs/205J
n read it n do as it says
Click to expand...
Click to collapse
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.
See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130
ahirwar said:
I want to say something to you, first your link
Is not working, second if you really know
About android then you should give real
link. Third this forum not for your advertising
This is for development so no need to put
advertise link, only put direct link ok Mr.
Click to expand...
Click to collapse
try this >>> http://fkardame.blogspot.in/p/ubislate-7c.html
or find on ur own
enjoy n learn to request not order
callingmedic911 said:
See here: http://forum.xda-developers.com/showpost.php?p=39546159&postcount=116
That person reported to got stock firmware along with proper instruction to make a bootable SDCard.
Direct Link for the firmware: https://www.dropbox.com/sh/aywf02dd0y2qp2k/Ao2v2JZxvC
Edit: That's original Stock firmware for Ubislate7C+, see explanation here: http://forum.xda-developers.com/showpost.php?p=39623084&postcount=130
Click to expand...
Click to collapse
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.
ahirwar said:
thanks brother for helping me.
I would like to ask one question
Is that original firmware? Because its name is
Wifi8188 something.
.
Click to expand...
Click to collapse
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.
callingmedic911 said:
Yes, that is original firmware for Ubislate7C+, please read my explanation (I have explained and proved that is stock firmware). Also, after flashing that file, you will have no longer Datawind's pre-installed (All sh*ty apps, so nothing to worry about).
That name looks weird because, it was automatically generated by compiler according to boards/configuration/driver etc, and looks like Datawind didn't had time to rename that file.
BTW Flash it, you'll have no problems.
Click to expand...
Click to collapse
Phoenixcard not working it stuck after burn MBR.
any suggestion????
ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery
Updating Please Wait for 10 Mins
simars said:
Hello Every...
So now wait is over i got Ubislate 7c+ Full Stock ROM from Datawind office and Livesuit to flash. So now you can try to build custom rom and can try other rom's and can test it..
Here is the UBISlate Datawind Stock ROm
Uploading Please wait it will take 1 Hour around 240Mb
Enjoy Just
Click to expand...
Click to collapse
Updating Dear Please wait for 10 mins more
fkardame said:
u can use livesuite n flash that img file u got from the dropbox directly
1. install livesuite drivers
2. open livesuite n select that file u got .
3. press n hold vol down button n insert the usb cable n keep pressing power button till u get warning on ur comp screen
4. press yes n yes
5. it will start flashing
Simple Done
n for ur information that 8188 means it has wifi of rtl8188 n if in case u have rtl 8150 then ur wifi wont work
so try to make a backup of ur device using cwm recovery
Click to expand...
Click to collapse
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance
ahirwar said:
Phoenixcard not working it stuck after burn MBR.
any suggestion????
Click to expand...
Click to collapse
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
fkardame said:
if in case u have rtl 8150 then ur wifi wont work
Click to expand...
Click to collapse
How can same device model have different WiFi boards?
callingmedic911 said:
What is the size of your SDCard? And how're you connecting your SDCard to your PC?
---------- Post added at 09:06 PM ---------- Previous post was at 08:56 PM ----------
How can same device model have different WiFi boards?
Click to expand...
Click to collapse
it does have coz its made with few different manufacturers coz the quantity ordered is very high
so it depends on the manufacturer .. what drivers n hardware they use
but the base is all the same like it has allwinner a13 processor
n allwinner13 support 3 different touchpanel drivers too
n 2 wlan driver n 3-4 sensor drivers n 2 diff camera driver
so all the best with using the file
i had one ubislate without sim i almost downloaded 44 flash files n got the right one finally
coz in some touch was not working in some camera in some sensor
but finally got the right file... thats what my experience says
take care n be safe before flashing as u can take the backup of ur device before flashing the given file
---------- Post added at 01:16 PM ---------- Previous post was at 01:10 PM ----------
ahirwar said:
Boss please give me livesuit and cwm recovery link.
And instruction for install cwm recovery .
I installed successfully stock rom via phoenixcard.
Thanks in advance
Click to expand...
Click to collapse
livesuite link >>> http://j.gs/2184 (Skip ad)
cwm recovery link >>> http://j.gs/205Z(skip ad)
n method to
Method:
1: Connect the tab to pc n install driver
2: Start the tab n activate usb debugg in tur tab
3: Flash Cwm recovery by clicking recovery for ics and follow the instruction
4: Click reboot to recovery.
ubislate 7c+
adb is not working in ubislate 7c+ ,
Already installed sdk adb in my pc. But adb not recognized
Ubislate 7c+ . Datawind don't care about customer problem.
it stucks on datawind logo
Hi everyone, this is a guide that help you to unbrick Micromax Canvas 2 Plus A110Q.
Follow all the steps carefully
1. Download the stock rom v1 from here . Do not download stock rom v2 from anywhere, that rom contain many bugs.
2. Download sp flash tools form here. (tool needed for flashing rom on the device)
3. Download USB drivers from here
Now you need to install the usb preloader drivers you just downlaoded.
To install the drivers:-
1.Extract the USB drivers.rar file.
2.Switch off your phone
3.Open device manager(search for "Device Manager") or click on computer properties , then device manager..
4.Connect your phone in OFF state
5.There will be a device named "mt65xx preloader" which will be there for some seconds.
You need to be quick at this. As soon as it is displayed, right click and click update driver.
Browse manually the files from usb drivers you extracted.
NOTE: THIS METHOD WILL NOT WORK ON WINDOWS 8
Now, if you are using windows 8 do this to install the drivers:
1. Dwonlaod the usb driver.rar file.
2. Hover pointer to Top Right corner of your screen, choose Settings from sidebar
3.Click last option "Change PC Settings"
4.Select "General"
5.Scroll to end and find "Restart Now" under "Advanced Startup". PC Will be in troubleshoot mode now
6.Once screen is back, select option "Troubleshoot"
7.Select "Advanced Options"
8.Select "Startup Settings"
9.Select "Restart"
Now important step. There will be several options to select from. You need to select "Option 7". For this press "7" key from number pad.
After your PC starts, follow above steps.
10. Choose the win 7 file from usb drivers.rar file to install drivers on windows 8 .
Now,
4. Extract ROM and Flash Tool
5. Open Flash_tool.exe from SP_FLASH Tools.
6.Select "Scatter-loading" and select "MT6589_Android_scatter_emmc.txt" from ROM folder
7.Select "Download" option, it will search for phone now.(if does not detect your phone pull the battery out and put it in again.)
8.Switch OFF the phone.
9.Connect it with USB (in OFF state only) (proper divers must be installed as said above)
10.If all goes well you'll see data transfer. At the end there will be Green Circle in middle of screen which means ROM is flashed.(don't panic if there is no green circle just let it work for 10 minutes and unplug your phone from computer.)
11.Remove phone, Switch it ON.
Thanks
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
I tried this and it worked. Successfully unbricked my phone.
Sent from my IQ446 Magic using Tapatalk
supersapien said:
Thanks for this guide. I think I bricked my Canvas2+. So I'm trying this now.
Click to expand...
Click to collapse
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
Click to expand...
Click to collapse
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
rahulbasu2013 said:
hey did you successfully unbrick your phone?? and is the method working??? I also think that I bricked my phone....
---------- Post added at 10:39 AM ---------- Previous post was at 10:25 AM ----------
I rooted my phone using "Framaroot app" by Boromir exploit and also installed Superuser.
Using ROM Toolbox pro, I changed the system font on my device.
But when I tried to revert to the system font, the phone wont turn on; (I also forgot to take a Nandroid backup)
The phone gets stuck at the boot logo.
I can enter recovery mode, and I also factory reset my phone, wiped cache, etc, but its of no use (first it turns on and then after the boot logo animation, nothing happens....)
Is my phone bricked????
Please help.......
Click to expand...
Click to collapse
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
ok thanks...
rahulbasu2013 said:
ok thanks...
Click to expand...
Click to collapse
There is a thanks button
Plz help
supersapien said:
Hey, I unbricked my phone using this technique. I think you're phone is stuck in a bootloop. This method will certainly work.
Click to expand...
Click to collapse
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Plz
Samuel117 said:
hey bro i also have same problem and my phone everytime stuck on bootloop but i am out of town now so is there any to flash stock rom using cwm
Thanks in advance
Click to expand...
Click to collapse
Not any reply plz reply guys i need help
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
Samuel117 said:
Not any reply plz reply guys i need help
Click to expand...
Click to collapse
How did you get into that problem?????
and can you describe in detail?
Using fastboot
rahulbasu2013 said:
Hey I'm using Windows 8.1 pro... so any help?????
---------- Post added at 09:34 PM ---------- Previous post was at 09:30 PM ----------
How did you get into that problem?????
and can you describe in detail?
Click to expand...
Click to collapse
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Samuel117 said:
i tried fastboot but not any keys work when i tried to go back so i remove my phone battery and when i put battery again and tried to switch on it stucked on bootlogo
Click to expand...
Click to collapse
did you try the unbricking guide??? did that help??
No
rahulbasu2013 said:
did you try the unbricking guide??? did that help??
Click to expand...
Click to collapse
cant able to use those step out of town now not have pc here
It didn't Work.
I did everything correctly, the green circle appeared, still stuck on bootloop. HELP PLZ.
bluetooth not working
hey guyz i have installed custom rom lewa os5 in my canvas a110q, every things works fine but bluetooth is not working. is it rom problem or something else. is there any solution for this? kindly reply me [email protected] thnx.
anyone helpme frnds
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
sai teja badri said:
i installed kitkat rom and now my phone is gets bugging when i lock phn it wont unlock again display was not coming
what i want to do???????????
Click to expand...
Click to collapse
Flash v1 and then flash any rom or uboot.bin of v1 via sp tools
Sent from my C2305 using Tapatalk
guyz it cnat detect my phone on device manager....
in other devices in device manager...it shows micromax a110q and the phone just boots ....
plz help
What happened is that, i haven't rooted my phone yet and out of no where it goes into bootloop.
I followed all the steps from installing the drivers - till getting the green circle, but no success
Can you please help me?
Will it help ?
I have the same problem on Phone stuck on boot up....
I Never did any rooting/other software updates to my mobile.
The Problem started when a message like "some XYZ process has stopped"
I clicked OK but the message came 1 after the other many times so I though of rebooting mobile.... I gave reboot option and the problem raised and the phone never did start up. I tried factory reset but still the same........A friend suggested me this But i still want to confirm is it harmless to use this and is this the proper technique for my problem ?
Please Help Me....
ok first thing is my english is bad
- i have root my device via farma root with super SU
- today i install android kitkat them available on google play(first option in serach list for kitkat theme)
- after installation nothing happend and don't show open button on that page of google play.
- so i just restart my phone (without uninstalling that theme)
- when its starting it stuck on "CANVAS MAGNUS" logo screen
- i wait for 20 mins but it don't get start
- then i did factry reset from (by pressing power + vol. up buttons)
- still same problem
please give some solution. my phone is in warrenty periodes
K!!nG said:
ok first thing is my english is bad
- i have root my device via farma root with super SU
- today i install android kitkat them available on google play(first option in serach list for kitkat theme)
- after installation nothing happend and don't show open button on that page of google play.
- so i just restart my phone (without uninstalling that theme)
- when its starting it stuck on "CANVAS MAGNUS" logo screen
- i wait for 20 mins but it don't get start
- then i did factry reset from (by pressing power + vol. up buttons)
- still same problem
please give some solution. my phone is in warrenty periodes
Click to expand...
Click to collapse
Flash stock rom using sp tool or use CWM/TWRP to install any other custom rom. It will solve your problem.
Siddhesh.K15 said:
Flash stock rom using sp tool or use CWM/TWRP to install any other custom rom. It will solve your problem.
Click to expand...
Click to collapse
Use this!
Just one click!
ridelight said:
Use this!
Just one click!
Click to expand...
Click to collapse
@ridelight where is the link?
http://forum.xda-developers.com/canvas-magnus/development/micromax-stock-install-one-click-t2758619
Siddhesh.K15 said:
Flash stock rom using sp tool or use CWM/TWRP to install any other custom rom. It will solve your problem.
Click to expand...
Click to collapse
Thanx for solution..
It works gr8 .
Btw.
what is CWM/TWRP??
ridelight said:
http://forum.xda-developers.com/canvas-magnus/development/micromax-stock-install-one-click-t2758619
Click to expand...
Click to collapse
Thnx for stom rom
But its not original
I want original if i get my warrenty back
K!!nG said:
Thanx for solution..
It works gr8 .
Btw.
what is CWM/TWRP??
Click to expand...
Click to collapse
Cwm &Twrp are the custom recoveries using which we can install different custom roms, mods and any which requires root and that's available in zip format can be installed using Cwm\Twrp. And don't just say thanks hit thanks button also , it won't cost you
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
K!!nG said:
Thnx for stom rom
But its not original
I want original if i get my warrenty back
Click to expand...
Click to collapse
Download official rom from this site LINK
Siddhesh.K15 said:
Cwm &Twrp are the custom recoveries using which we can install different custom roms, mods and any which requires root and that's available in zip format can be installed using Cwm\Twrp. And don't just say thanks hit thanks button also , it won't cost you
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
Download official rom from this site
Click to expand...
Click to collapse
Thnx for link but it say File busy
And ask for premium id
i m not a richy rich for premium id's
But thnx for link
And
I can't hit thnx twice in single post i think so.
Its the original rom, only bootlogo chenged by me, the rom is the stock one.
---------- Post added at 09:27 AM ---------- Previous post was at 09:26 AM ----------
Chang rom wiont void hardware warranty
@K!!nG
The link i gave u before is often busy coz of server load.
Dont know what are you saying about "Thanks" but here is the working link of stock rom tested ok
https://drive.google.com/uc?id=0B_nouTN5y1w7S0pGZDVmd2h6S0k
Sent from my Micromax A117 using XDA Premium 4 mobile app
same problem
when i have done a full reset and then tried to restore the applications of my smartphone with the help of titanium backup the problem of hanging on boot screen have arouse on my phone.
will stock ROM will help me in my case too.
reply please, since i am in urgent need of my smartphone.
Try Sp tooling
Have u try SP tooling...it will work 100% bro:good:
thanks
Sek her said:
Have u try SP tooling...it will work 100% bro:good:
Click to expand...
Click to collapse
the custom rom worked perfectly:laugh::laugh:
same problem
K!!nG said:
ok first thing is my english is bad
- i have root my device via farma root with super SU
- today i install android kitkat them available on google play(first option in serach list for kitkat theme)
- after installation nothing happend and don't show open button on that page of google play.
- so i just restart my phone (without uninstalling that theme)
- when its starting it stuck on "CANVAS MAGNUS" logo screen
- i wait for 20 mins but it don't get start
- then i did factry reset from (by pressing power + vol. up buttons)
- still same problem
please give some solution. my phone is in warrenty periodes
Click to expand...
Click to collapse
helo dear,
I did the same. I go to Recovery option and do REBOOT without doing anything. After that it struck on welcome screen. Unfortunately USB Debugging is not ON. Screen hang on with logo CANVAS MAGNUS.
How can i get rid of this problem. pls reply
---------- Post added at 01:06 PM ---------- Previous post was at 12:41 PM ----------
Dear all
my canvas magnus screen hangs on CANVAS MAGNUS logo when starts. Unfortunately USB Debugging is OFF.
This haapened when i rooted my phone and the go to System recovery (volume=power), then i REBOOT my phone.
After that it is getting struck of when logo comes on screen.
pls tell how can i solve this problem. Waiting keenly as i am not able to use my phone.
It is better to flash stock ROM using SP Tools. If you dont know the process, then search about SP Tools and flashing instructions in XDA.
Hi friends !
Encountred WhiteScreen Erros while Rooting your s7262 ??
Dont WOrry ! We have SImple and Working Solution for you
AIM : fixing WhiteScreen Errors on s7262
Things we will need:
(attached at the end of post)
file 1: whitefixS7262.rar location : PC
file 2 : ODIN307.zip Location : PC
**Make sure you have USB drivers installed**
Instructions:
STEP 1 :
a:Put Your phone in download Mode by pressing Volume Down +Home+Power key simultaneously.
b: Press Volume UP when Warning screen appears
STEP 2:
a: Extract ODIN307.ZIP and Run Odin 307.exe as Administrator (by right click > Run As> Administrator)
b: Extract whitefixS7262.rar you will get file BOOTSPL_S7262XXUAMJ3.tar
c: Connect Phone with PC
d:Click on PDA select[COLOR="SeaGreen)"] BOOTSPL_S7262XXUAMJ3.tar [/COLOR]
e: Click START !!
f: You will see message PASS !!
Your Phone WIll Be Rebooted Automatically and whitescreen error will not be occured
for latest and tested tutorial on How to Root Samsung star pro duos s7262 Go to : Rooting Guide for Samsung Star pro duos s7262
Press Thanx if i helped you
If you encountered any problem , Reply Here with full error message
S7262 Totally black screen.Internal sound after one of the two files in the zip .
Remove the fist file.After BOOTSPL_S7262XXUAMJ3.tar, still white screen when trying recovery.
After going stock, everything ok but "e:missing bitmap icon_att_fota_installing" when in recovery.
WTF !!! I flashed the tar file and the phone just died.. This is no fix, please do not use these files...
S7262 bricked
This is Bogus. Help me. First I flashed BOOTSPL_S7262XXUAMJ3 as mentioned, then lot of grey lines started coming on the screen instead of Samsung pro GT S 7262. Then I used odin and flashed the other file which came out of whitefixS7262.rar that is BOOTSPL_S7262JVUANB2.tar. After flashing the second file, my phone just bricked. None of the buttons are working now, neither the phone is getting booted, nor I can go to download mode or any mode. PLEASE HELP AS MY PHONE IS BRICKED AFTER DOING THIS.
zeetherocker said:
WTF !!! I flashed the tar file and the phone just died.. This is no fix, please do not use these files...
Click to expand...
Click to collapse
please help me if you fixed the problem, I too followed the tutorial and my phone is dead, I cant even enter into download mode
---------- Post added at 05:07 AM ---------- Previous post was at 05:05 AM ----------
I just flashed your file, Now I get a white screen on all modes, I cant even enter into download mode after flashing the file given you, please help me
Chandradev said:
please help me if you fixed the problem, I too followed the tutorial and my phone is dead, I cant even enter into download mode
---------- Post added at 05:07 AM ---------- Previous post was at 05:05 AM ----------
I just flashed your file, Now I get a white screen on all modes, I cant even enter into download mode after flashing the file given you, please help me
Click to expand...
Click to collapse
I did fix it. It was a long time back and I don't remember all that well. But from what I can recall, the phone is actually functional only the display does blank. So imagine that your display is broken and try to boot into download mode. once you are confident enough that you are in the download mode press vol up and then it should show up on Odin. after this point you just need to flash the stock files. I know I'm late in replying but if you still have the problem, this should help
---------- Post added at 10:19 PM ---------- Previous post was at 10:12 PM ----------
jai2061 said:
This is Bogus. Help me. First I flashed BOOTSPL_S7262XXUAMJ3 as mentioned, then lot of grey lines started coming on the screen instead of Samsung pro GT S 7262. Then I used odin and flashed the other file which came out of whitefixS7262.rar that is BOOTSPL_S7262JVUANB2.tar. After flashing the second file, my phone just bricked. None of the buttons are working now, neither the phone is getting booted, nor I can go to download mode or any mode. PLEASE HELP AS MY PHONE IS BRICKED AFTER DOING THIS.
Click to expand...
Click to collapse
check my post below
this file is really working
thanks
zeetherocker said:
WTF !!! I flashed the tar file and the phone just died.. This is no fix, please do not use these files...
Click to expand...
Click to collapse
Thish is WORK!!!!!!!!!!!!!!
Flashing ***AMJ3 & wipe Factory reset after wipe Cash Partition
Hello everyone I'm new to Androids world.My curiosity to customize my stock android landed me in XDA site.I have flashed a cwm recovery in my Samsung GT s 7262 recently but I ended up in white light screen on my recovery.After continous searching for solution I reached a YouTube video of LogansDroid video (link updated) How to fix white screen in Samsung Galaxy star dated Nov 21, 2016) about fixing white screen.In description of video link is provided for cwm recovery to fix white screen yesterday I flashed the zip using Odin 3 & to my surprise I was able to get cwm recovery instead of white screen.Guys give a try u may also be able to fix ur device problem. Don't blame me for anything that happens to ur device.If u r ready to risk u may also gain solution to ur problem.Guys sorry for not able to attach the recovery tar file in that link that's y I have clearly written the videos title so that u can find it easily.I tried to attach the file but it says this cannot be done.Happy Flashing.
don`t work
give life to ur dead phone
i too used this in odin but my mobile got dead
very bad people do post these type of wrong files. if u dont know then please dont post anything in this forum rather u sit calm.
after flashing i got white screen and it is not going to nor recovery mode nor download mode.
even it doesnt power up with samsung logo.
atlast i tried to do with usb dongle jig but failed . i didnt got any help from that jig. money wasted
but atlast i gave life to my samsung gts7262 without using any mechanical steps lyk using Riff box jtag.
i done it with my computer and with odin.
soo if u wanna know how to gv life to ur dead phone then reply to my message i may help you.
Help
subratmunnu said:
i too used this in odin but my mobile got dead
very bad people do post these type of wrong files. if u dont know then please dont post anything in this forum rather u sit calm.
after flashing i got white screen and it is not going to nor recovery mode nor download mode.
even it doesnt power up with samsung logo.
atlast i tried to do with usb dongle jig but failed . i didnt got any help from that jig. money wasted
but atlast i gave life to my samsung gts7262 without using any mechanical steps lyk using Riff box jtag.
i done it with my computer and with odin.
soo if u wanna know how to gv life to ur dead phone then reply to my message i may help you.
Click to expand...
Click to collapse
BRO i have same problem please help me.
[email protected] said:
BRO i have same problem please help me.
Click to expand...
Click to collapse
Pls pls give me the solution i need ur help
subratmunnu said:
i too used this in odin but my mobile got dead
very bad people do post these type of wrong files. if u dont know then please dont post anything in this forum rather u sit calm.
after flashing i got white screen and it is not going to nor recovery mode nor download mode.
even it doesnt power up with samsung logo.
atlast i tried to do with usb dongle jig but failed . i didnt got any help from that jig. money wasted
but atlast i gave life to my samsung gts7262 without using any mechanical steps lyk using Riff box jtag.
i done it with my computer and with odin.
soo if u wanna know how to gv life to ur dead phone then reply to my message i may help you.
Click to expand...
Click to collapse
can u help me with dead phone , this son of b***** posted wrong files and phone got dead,
انا اعلم ان ذلك الحل متاخرا جدا لكننى قمت بنفس الشىء الان ولقد ظهرت الشاشة البيضاء فجربت الملف التانى اختفت الشاشة البيضاء واصبحت الشاشة سوداء
والحل كالتالى
1- اولاقم بتنزيل السوفت وير الاصلى للهاتف
2- تاكد من شحن الهاتف ضعه فقط ع الشاحن واتركه حتى لو نصف ساعة
3-قم بنزع البطارية
4- اضغط ع مفتاح الطاقة+ ومفتاح خفض الصوت+ ومفتاح الرئيسية
5- اضغط مرة اخرى على مفتاح خفض الصوت
6- افتح برنامج اودين كمسئول ثم تاكد من اتصال الهاتف بجهازك الكمبيوتر
7-ضع الروم فى المكان المخصص له pda
8- قم بالضغط على كلمة ابدء
9-انتظر حتى يتم الاكتمال وسوف يعمل الهاتف بشكل طبيعى
اعتذر عن ضعفى فى اللغة الانجليزية يمكنكم الترجمة وسوف اترجم لكم ولكن ببعض الاخطاء اللغوية
i will translate it and i`m sorry because i`m not good in english
to solve this problem
1- download the stock room
2-unplug the battery
3- plug battery and press power+volume down+home buttom
4- press volume down and plug the data cable
5-run odin and put the stock room in pda
6-press start and wait to finish
7- the mobile will start normal
After a long search i found the rom for my phone ( samsung galaxy a5 clone based on mtk6582 chip) i extracted the rom file and load scatter file in sp flash tool and run it as download.... all procces gone well but after flashing rom my phone is dead and not turning on..... i tried to flash it again but this time facing dram failed error......
Plz guide me to get out of this problem
Plz dont ignore bcoz ur attention can save my money and phone
Last edited
Anyone?
Try solutions discussed in the link
RajpoOt- said:
After a long search i found the rom for my phone ( samsung galaxy a5 clone based on mtk6582 chip) i extracted the rom file and load scatter file in sp flash tool and run it as download.... all procces gone well but after flashing rom my phone is dead and not turning on..... i tried to flash it again but this time facing dram failed error......
Plz guide me to get out of this problem
Plz dont ignore bcoz ur attention can save my money and phone
Last edited
Click to expand...
Click to collapse
Here this guy had same problem and he solved it. See the link below
www_chinaphonearena_com/forum/Thread-Hard-bricked-mt6589-plz-help
Replace _ with .
Just remember one thing, keep trying again and again. Don't lose hope.
*****
FARHAN 951 said:
From which you find rom
Click to expand...
Click to collapse
I wil send u link when i get home
Am not sure but i think that was the wrong proloader i flashed on my phone so its totally dead.... can u please find me a right one so i can alive my phone?
********
FARHAN 951 said:
I am also having same trouble .From which you buy this phone .I had bought this type of phone from Rawalpindi.
---------- Post added at 04:32 AM ---------- Previous post was at 04:29 AM ----------
It has fixed battry .May be battry will dead if not charged for a month or more.I had formated preloader about 26 days ago .Now mobile is not charging or booting.Now your are must facing these problem
Click to expand...
Click to collapse
I charged my phone every day so there is no reason to dead..... my phone is hard bricked
I bought this phone in mirpur azad kashmir
*****