Database Info

[ROM] [REPACK] [ 5.1.1 ] RC5 Lollipop Jiayu S3 & S3 Pro [MT6752]

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is the well known Build of Jiayu Germany Lollipop Release Candidate 5 (latest) for Jiayu S3 (Advance/Basic) with MTK 6752 SoC
There's also a modified version , for the new Jiayu s3 Pro ( with 32GB of internal memory ) also MTK6752
This is being posted here, as this is a full SPFlashTools "Base" ROM, usually used to recover your device
( or if you want to roll back to Lollipop ...)
The "REPACK" Version is simply the same RC5 Rom, but with latest M.A.D. TWRP already included
There's also a modified version for the s3 Pro (32GB)
The Rom should be flashed in "UPGRADE MODE" on SPFlashTools. (Doesn't matter in what ROM / OS you currently are ...)
DO NOT flash any SP Flash Tools Jiayu s3 (old 16gb) roms on the new Jiayu s3Pro (32GB)
--> Preloader, partitions are different, you'll get an hard brick.
Installation Instructions:
BACKUP EVERYTHING, This will ERASE everything from your internal phone memory (pics, videos, data, etc )
Turn OFF the phone
Open MediaTek SPFlashTools
Load mt6752 Scatter
Choose "Upgrade Mode"
Press "Download"
At this moment, plug USB Cable to phone, it'll start flash ...
Some Jiayu S3, require BOTH Volume Keys to be pressed , while you plug USB Cable to enter in "download Mode"
If you wish to upgrade to latest M.A.D. Android Nougat, after you flashed RC5, it's recommended that you let the RC5 boot up, then you can go back to recovery ( Latest M.A.D. Recovery included already)
Place AOSP Nougat Rom on internal memory/ external SDCard
WIPE ALL
Flash AOSP and GAPPS & SuperSu (latest two optional)
Download ROMs from "XDA DevDB Download Section"
Choose the right rom, for your Jiayu S3 variant (s3 advance / basic 16GB) or ( s3 pro 32GB )
Working:
Everything
The Rom Changelogs, and old discussion can be found on this thread :
https://forum.xda-developers.com/jiayu-s3/development/rom-jiayu-s3-5-1-1-t3217241
GPL Compliance:
https://github.com/MediatekAndroidDevelopers
XDA:DevDB Information
[ROM] [REPACK] [ 5.1.1 ] RC5 Lollipop Jiayu S3 & S3 Pro [MT6752], ROM for the JiaYu S3
Contributors
superdragonpt, DerTeufel1980
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: SP Flash Tools
Based On: MediaTek AOSP
Version Information
Status: Stable
Created 2017-01-25
Last Updated 2017-01-25

Reserved
,,,,,,,,,,,,,,

Please include boot from AICP 10 (with fixed wi-fi hotspot).

superdragonpt said:
ROMs will take a while to be uploaded ...
slow speed...
Click to expand...
Click to collapse
thanks man.....
waiting for the s3 pro version....

My net provider is having issues, I currently have no home connection, hopefully they'll fix this today, for me to upload
Bb

ROMs being uploaded

superdragonpt said:
ROMs being uploaded
Click to expand...
Click to collapse
thank you so much...
hope flashing rc5 and then stable 7 fix my low signal connection on s3 pro

All done ...

Can you also upload the SPFT flash tool so that people would use a similar version and reduce variables and become easier to debug when a problem arises?

I'm sorry for the stupid question but are de download links?
Have searched in the download section but keeps sending me back to this post!
Enviado do meu Redmi Note 3 através de Tapatalk

Found it, sorry for double post!
Enviado do meu Redmi Note 3 através de Tapatalk

Upgrade successfull!
Thank you. This has helped me gretly with my quest to upgrade 4.4 -> 5.x -> 7.x.
I had a problem with uploading through SP Flash Tool that it wouldn't start to download to phone, but after many tries i finally changed USB port, and then it worked like a charm.
I have a question though. Should i stay on this ROM or upgrade to 6.0.1 or what? The problem is that Xposed framework does not work yet with 7.x, so untill it does, i will stay on system that does support it.

AgiZ10 said:
Thank you. This has helped me gretly with my quest to upgrade 4.4 -> 5.x -> 7.x.
I had a problem with uploading through SP Flash Tool that it wouldn't start to download to phone, but after many tries i finally changed USB port, and then it worked like a charm.
I have a question though. Should i stay on this ROM or upgrade to 6.0.1 or what? The problem is that Xposed framework does not work yet with 7.x, so untill it does, i will stay on system that does support it.
Click to expand...
Click to collapse
Then go with AICP11 MM its the best MM rom for the phone with xposed (mm) available ...

superdragonpt said:
Then go with AICP11 MM its the best MM rom for the phone with xposed (mm) available ...
Click to expand...
Click to collapse
Thanks, done.
Will continue replying there if something comes bugs me

A huge thank you for the s3pro version. I have just bought a second S3 32gb without knowing that it was different to my old S3 32gb, and bricked it trying to install the old rc5 that is on my old phone. This version rescued the phone from death!!
Can I use TWRP to install SuperSU and root it? I'm guessing there's zero chance of flashing 7.1.1 on the s3pro.

StoneTheKiwis said:
A huge thank you for the s3pro version. I have just bought a second S3 32gb without knowing that it was different to my old S3 32gb, and bricked it trying to install the old rc5 that is on my old phone. This version rescued the phone from death!!
Can I use TWRP to install SuperSU and root it? I'm guessing there's zero chance of flashing 7.1.1 on the s3pro.
Click to expand...
Click to collapse
I've just found that the recovery is the chinese one, not twrp. Reflashing just recovery does not change this. The build number is 20160302-190806. Any ideas on what might have happened here?

I made this thread mainly for the newer s3 33GB variant...
Since I also got the 32gb variant, after my old s3 died
You just need to follow instructions on the first post
Download full rc5 repack for the 32GB variant
And flash in "upgrade mode"
You,ll get the newer MAD twrp, that is also Nougat compatible.
After flash, just boot to recovery , full wipes (including data, and flash newer Nougat release)
Cheers

superdragonpt said:
I made this thread mainly for the newer s3 33GB variant...
Since I also got the 32gb variant, after my old s3 died
You just need to follow instructions on the first post
Download full rc5 repack for the 32GB variant
And flash in "upgrade mode"
You,ll get the newer MAD twrp, that is also Nougat compatible.
After flash, just boot to recovery , full wipes (including data, and flash newer Nougat release)
Cheers
Click to expand...
Click to collapse
Thanks for your reply. I've just done it all again - downloaded the PRO pkg afresh and flashed as 'upgrade', but again booting to recovery shows a chinese menu. I also flashed in 'format all' mode, but the same result. I'm downloading the pkg from the 'downloads' section of this forum, and it unpacks to show recovery as 'S3_h560_TWRP_3.0.2-0' at 13,074kb. The recovery from the old rc5 pkg is a different size - I suppose that can't be used without rewriting the scatter file? Or does the scatter file reference the recovery that's recommended for your latest 7.1.1 rom? I could just get that separately and copy it in.
Apart from blaming the pixies, I really don't understand what is going wrong here.

Stranger and stranger. I replaced the recovery with the one hosted on mediafire for 7.1.1 (though that has a space in the filename which had to be removed for the scatter txt to recognise it) and after flashing the phone was bricked. Then replaced recovery with the one from rc5 and again it was bricked. Then unpacked afresh the pro pkg and flashed with that in 'format all' mode - this time it booted to chinese recovery but refused to boot normally. Then reflashed in 'upgrade' mode and now it boots normally but refuses to boot to recovery. Perhaps the hardware has been changed even further, or perhaps the gods are just laughing at me, but I've run out of options now. The problem is that supersu won't install without updating itself (though it's 2.79) and it fails to update under the 'normal' update option and doesn't have a twrp recovery to update through. Hence the phone can't be rooted.

Sorry for this question, please how can I revert to this ROM I'm already on 7,1.2, what does repack means or how should I repack it ,any possible way to use spflashtool for this ROM, your answer is highly needed urgently please to whom ever knew

[DEVELOPMENT STOPPED][Unofficial][TWRP] for YU Yunicorn

DEVELOPMENT OF CUSTOM ROMS FOR YU YUNICORN STOPPED DUE TO LACK OF KERNEL SOURCES
Warning: This may not work for the MM version of Yunicorn. Because YU had sent patches in the updates. So try this and if it doesn't work, do some porting yourself .
Hey guys this thread is for TWRP for YU Yunicorn, the most popular custom recovery is now available for YU Yunicorn
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
TWRP is helpful in flashing custom ROMs and do a nandroid backup and now available for Yunicorn.
Click to show steps of flashing TWRP in YU Yunicorn
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool and the recovery.zip on your PC.
2. Open and run flash tool.exe as administrator.
3. Click on the scatter loading button and select the scatter file from the recovery folder.
4. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
5. Boot into recovery by pressing VOL UP + VOL DOWN + POWER button.
Now, you have successfully installed TWRP on your mobile.
Download SP Flash Tool form here.
In some cases you are not able to see TWRP after booting into recovery. You have to flash the recovery twice when you face this problem.
CHANGELOG
What's new in 3.0.1-0:
support new CM 13.0 pattern encryption (sultanqasim)
fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
libtar updated to latest upstream and fixes (jcadduono)
fixes for loading custom themes (_that)
TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
translation updates - added Italian, Czech and Polish and significant updates to Dutch
progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
fix input box text display (Dees_Troy)
reboot option after zip install complete (bigbiff)
other mostly invisible bug fixes and improvements
BUGS
- Touch in TWRP works after 10-15 seconds when boot into recovery
- other bugs you tell me
NOTE: THIS IS NOT OFFICIAL TWRP AND MAY NOT BE STABLE DO IT AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANYTHING WRONG HAPPENS. FEEL FREE TO ASK QUESTIONS.
Current latest Version: 3.0.1-0
Download TWRP recovery.zip from below.
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
TWRP_3.0.1-0
Do not forget to press the thanks button

Great work bro. I will try today and keep you posted.

Best recovery
Recovery is working nice. :good:
No bugs till now.

Post the download link
Cm 13 for yunicorn yu5530. Post the download link for c13 or rr rom

Dishonor96 said:
Cm 13 for yunicorn yu5530. Post the download link for c13 or rr rom
Click to expand...
Click to collapse
Not available now, you have to wait because camera, fingerprint, audio, gps, wifi, thethering, not working.
Don't worry we are working on fixing these.
Sent from my OnePlus 3T using XDA Labs

This method is not working for me on marshmallow. My phone got bricked after flashing recovery.

Still working?
_saurabh__._ said:
Not available now, you have to wait because camera, fingerprint, audio, gps, wifi, thethering, not working.
Don't worry we are working on fixing these.
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
Aa? No

starckarcimi said:
Aa? No
Click to expand...
Click to collapse
We tried to fix those bugs, but no luck. A successful porting for Yu Yunicorn isn't possible without kernel source. But still you can try porting yourself, refer to some useful posts on XDA. ,

Dude help me
I tried my times through Sp Flash it says done at last but once i boot in recovery it open up with old recovery options not twrp, I also tried Adb Fastboot tool. Once file transfer it dont boot is twrp recover..... M pissed please help me to correct this Its been 3 days now its very imp for me to root my phone coz my Imei Invalid.... It will get fixed after rooting my phone.

_saurabh__._ said:
Hey guys this thread is for TWRP for YU Yunicorn, the most popular custom recovery is now available for YU Yunicorn
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
TWRP is helpful in flashing custom ROMs and do a nandroid backup and now available for Yunicorn.
Click to show steps of flashing TWRP in YU Yunicorn
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool and the recovery.zip on your PC.
2. Open and run flash tool.exe as administrator.
3. Click on the scatter loading button and select the scatter file from the recovery folder.
4. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
5. Boot into recovery by pressing VOL UP + VOL DOWN + POWER button.
Now, you have successfully installed TWRP on your mobile.
Download SP Flash Tool form here.
In some cases you are not able to see TWRP after booting into recovery. You have to flash the recovery twice when you face this problem.
CHANGELOG
What's new in 3.0.1-0:
support new CM 13.0 pattern encryption (sultanqasim)
fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
libtar updated to latest upstream and fixes (jcadduono)
fixes for loading custom themes (_that)
TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
translation updates - added Italian, Czech and Polish and significant updates to Dutch
progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
fix input box text display (Dees_Troy)
reboot option after zip install complete (bigbiff)
other mostly invisible bug fixes and improvements
BUGS
- Touch in TWRP works after 10-15 seconds when boot into recovery
- other bugs you tell me
NOTE: THIS IS NOT OFFICIAL TWRP AND MAY NOT BE STABLE DO IT AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANYTHING WRONG HAPPENS. FEEL FREE TO ASK QUESTIONS.
Current latest Version: 3.0.1-0
Download TWRP recovery.zip from below.
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
TWRP_3.0.1-0
Do not forget to press the thanks button
Click to expand...
Click to collapse
Is it stable??
Any further updates...

RyanRaina1 said:
I tried my times through Sp Flash it says done at last but once i boot in recovery it open up with old recovery options not twrp, I also tried Adb Fastboot tool. Once file transfer it dont boot is twrp recover..... M pissed please help me to correct this Its been 3 days now its very imp for me to root my phone coz my Imei Invalid.... It will get fixed after rooting my phone.
Click to expand...
Click to collapse
Did you tried flashing the recovery twice ? By twice I mean, after flashing the recovery, press the download button again in SP Tool and let the recovery to flash again, do not boot your phone in either recovery or system between the two times flashing procedure. Try again.
Hey, if you want to fix invalid IMEI, nothing is working on Marshmallow, even if you root your device and edit IMEI by any of the Root apps like Chamelephon MobileUncle Tools it will give a wierd IMEI like 40#[email protected]. The only way to fix IMEI is to flash lollipop ROM again by SP Flash tool. https://drive.google.com/file/d/0B2MZMs2kUcOZeXd6dkdTc0M5TEk/view. This is download link for LP stock ROM, thanks to Ayushmaan Thakur who extracted this. After flashing LP root using TWRP or Kingroot app both will work then use Chamelephon to change IMEI, you can also use Engineer Mode for changing IMEI if Chamelephon isn't working. Then update to Marshmallow.

jowinjohnchemban said:
Is it stable??
Any further updates...
Click to expand...
Click to collapse
For your info, it is the latest stable version, newer version aren't working smoothly and takes more time to boot into recovery.
Sent from my OnePlus X using XDA Labs

_saurabh__._ said:
For your info, it is the latest stable version, newer version aren't working smoothly and takes more time to boot into recovery.
Click to expand...
Click to collapse
I'm using YU Yunicorn 5530
And is under warranty period also...
After 2 months of purchase I faced charging issue that its not charging to 100% , stuck at 90%
---------- Post added at 05:06 AM ---------- Previous post was at 05:02 AM ----------
Does the source code of the mediatek soc for this device
MT6750 Octacore 1.95GHz
Released??
Or any stable custom ROM such as Lineage, Oxigen, Cyanogen,...

jowinjohnchemban said:
I'm using YU Yunicorn 5530
And is under warranty period also...
After 2 months of purchase I faced charging issue that its not charging to 100% , stuck at 90%
---------- Post added at 05:06 AM ---------- Previous post was at 05:02 AM ----------
Does the source code of the mediatek soc for this device
MT6750 Octacore 1.95GHz
Released??
Or any stable custom ROM such as Lineage, Oxigen, Cyanogen,...
Click to expand...
Click to collapse
Are you using Marshmallow version. If yes then you will surely having this problem. Because every Yunicorn user is having this problem,
Temparory fix- try clearing battery cache and dalvik then reboot, then do a complete discharge and then let it attain its maximum battery percent after that do a complete discharge again, then again let it attain the maximum battery percent. Do this 4-5 times, and your phone will be charging 100% again.
Permanent fix- you have to flash lollipop version, as it is stable.
No there is no source code released by YU, and no stable custom ROMs are available, Note that the stock ROM isn't stable, how custom ROM be stable.
Sent from my OnePlus X using XDA Labs

hateis said:
This method is not working for me on marshmallow. My phone got bricked after flashing recovery.
Click to expand...
Click to collapse
Have you flashed it correctly? Are you using latest version of SP Flash tool? Make sure that there is no corrupt file. Note that this recovery is tested many times. Which type of brick it is? I am reposting the link, try again then.
Sent from my OnePlus X using XDA Labs

Anybody got twrp on marshmallow successfully

hateis said:
Anybody got twrp on marshmallow successfully
Click to expand...
Click to collapse
Yup
Sent from my OnePlus X using XDA Labs

I am not able to go through boot logo .....
After flashing ??

jowinjohnchemban said:
Is it stable??
Any further updates...
Click to expand...
Click to collapse
Not stable on some mobiles.
Sent from my OnePlus X using XDA Labs

Is this recovery working on marshmallow? It seems like my device is bricked

[ROM] LineageOS 15.0 Unofficial Rom

<code>
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
</code>
Starting Development on Lineage 15.0. This will hopefully track my progress
Prerequisites:
TWRP
Unlock Bootloader
What Works?
- Don't Know Yet
What's broken ?
Probably Everything
Download Links
ROM:
Coming Soon
Trello:
https://trello.com/b/K9fXDV9L/lineageos-zenfone3
TWRP:
https://drive.google.com/drive/folde...zNmTmpzSWthMTQ
GAPPS:
http://opengapps.org/
Source Code:
https://github.com/LineageOS-Zenfone3
XDA:DevDB Information
Lineage 15.0, ROM for the Asus ZenFone 3
Contributors
mdigiacomi, mdigiacomi
ROM OS Version: 8.x Oreo
Based On: LineageOS
Version Information
Status: Testing
Created 2017-10-06
Last Updated 2017-10-06

Reserved for stuff

Fun Fact: Lineage 15.0 is 85,000+ source files.

Great!!!

Nice!!

Reserve hahahhaha nice

Oreo yeah :victory:

WoooW !!! Nice. Good Work !!!!!

Hello,
Do you think in this new version the "roaming bug" will be fixed ?
I have tried all custom roms available (lineage 14.1, ViperOS and RR) and any is working for data in roaming.

Niteshakee said:
Hello,
Do you think in this new version the "roaming bug" will be fixed ?
I have tried all custom roms available (lineage 14.1, ViperOS and RR) and any is working for data in roaming.
Click to expand...
Click to collapse
To solve data roaming issues you just have to flash the latest stock rom using the stock recovery, start it up, then reinstall your custom rom of choice. Backup your data first!
At least this has worked for me with LineageOS 14.1 (using the stock rom version "WW-14.2020.1708.56").
I've had a hard time figuring this out - I even compiled the ROM myself, trying anything I could imagine to solve this.
By flashing the stock rom properly all the special firmware partitions the phone has get updated too - the bug is in one of them, not the rom itself.
A custom rom installation normally doesn't touch those partitions.

planet9 said:
To solve data roaming issues you just have to flash the latest stock rom using the stock recovery, start it up, then reinstall your custom rom of choice. Backup your data first!
At least this has worked for me with LineageOS 14.1 (using the stock rom version "WW-14.2020.1708.56").
I've had a hard time figuring this out - I even compiled the ROM myself, trying anything I could imagine to solve this.
By flashing the stock rom properly all the special firmware partitions the phone has get updated too - the bug is in one of them, not the rom itself.
A custom rom installation normally doesn't touch those partitions.
Click to expand...
Click to collapse
Thanks a lot.
It's true I upgraded from stock 6.0.1 to lineage 7.1.2
Now i flashed back to latest stock (7.0) but with twrp recovery: it's work fine ( i have only a weird message about dm-verify on boot.)
So if now if I flash lineage with twrp you think the bug disappear ?

Niteshakee said:
Thanks a lot.
It's true I upgraded from stock 6.0.1 to lineage 7.1.2
Now i flashed back to latest stock (7.0) but with twrp recovery: it's work fine ( i have only a weird message about dm-verify on boot.)
So if now if I flash lineage with twrp you think the bug disappear ?
Click to expand...
Click to collapse
I'm not sure if TWRP updated those partitions so it's possible it doesn't work...
I think you should reflash the latest stock rom with the right stock recovery, then reinstall the latest TWRP and Lineage.

planet9 said:
I'm not sure if TWRP updated those partitions so it's possible it doesn't work...
I think you should reflash the latest stock rom with the right stock recovery, then reinstall the latest TWRP and Lineage.
Click to expand...
Click to collapse
Yes right , i am doing his right now :good:

Hello,
you mention the "data" issue on roaming. Do you mean to unlock Band 20?
I have a ZE520KL TW version and rooted it, now I try to make Band 20 working,
but without success. Should i try LineageOS15.0 and will it help or not at all?
Thank you.

Does this work on the ZC520TL X008D? I don't mind testing I just want to make sure it doesn't brick my phone before a blind flash.

Please make rom for ZC551KL. We haven't a custom rom or kernel. i'm so unhappy.

Is the project stopped? No new activity on trello

Any development for Zenfone 3 Laser ? I'm tired it's problems and system.

MoNgoLHİMİK said:
Any development for Zenfone 3 Laser ? I'm tired it's problems and system.
Click to expand...
Click to collapse
oreo

OreoBooyah said:
oreo
Click to expand...
Click to collapse
Asus's firmware or Custom Firmware ? If Asus's firmware , i don't want. Me and A lot of Z3 Laser users need Custom Firmware.

[RECOVERY][3.4.0-2][instantnoodle]Unofficial TWRP for OnePlus 8 Unified (Test)

Moderator Announcement: THREAD CLOSED on request of OP @mauronofrio!
In future, please follow this thread in the Cross-device Development Section.​
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- TWRP boots;
- Fastboot boot is working;
- Decryption is working.
- Vibration is working.
- System, Vendor and Product partitions mount is working but you can't modify them.
- You can flash magisk and others kernels.
- You can flash ROMs.
- Format Data still broken.
Install guide (Reccomended):
Acutally seems oneplus (or directly android 10) re-introduced the recovery partition so you should only flash it in recovery partition or you can try to boot it from fastboot. For now only boot it.
To flash:
Code:
fastboot flash recovery_a twrpname.img
fastboot flash recovery_b twrpname.img
To boot:
Code:
fastboot boot twrpname.img
Tips:
If you have some problems with backup, like 255 error or something similar please check this guide: https://forum.xda-developers.com/oneplus-6/how-to/255-error-twrp-backup-restore-999-t3801632
For the Bacups use always "system_image" and "vendor_image" instead of "system" and "vendor".
Download:
TWRP 3.4.0-2 Test by mauronofrio
TWRP 3.4.0-1 Test by mauronofrio
TWRP 3.4.0-0 Test by mauronofrio
TWRP 3.3.1-10 Test by mauronofrio
TWRP 3.3.1-10 Test Installer by mauronofrio
TWRP 3.3.1-8 Test by mauronofrio
TWRP 3.3.1-7 Test by mauronofrio
TWRP 3.3.1-4 Test by mauronofrio
TWRP 3.3.1-4 Test Installer by mauronofrio
TWRP 3.3.1-2 Test by mauronofrio
TWRP 3.3.1-1 Test by mauronofrio
TWRP 3.3.1-0 Test by mauronofrio
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/mauronofrio/android_bootable_recovery
https://github.com/mauronofrio/android_device_oneplus_instantnoodle_TWRP
Kernel source: precompiled stock one
My Telegram TWRP Support Group:
https://t.me/twrp_Mauronofrio
Donations:
Credits:
I want to say a big thanks to the tester @Fentadroid
Created 2020-05-18

DON'T FLASH THE TWRP, please only boot it for now

mauronofrio said:
DON'T FLASH THE TWRP, please only boot it for now
Click to expand...
Click to collapse
I will give it a try! Thank you so much for this! <3

How is this possible if no one is able to unlock their bootloader yet? ?

TheKnux said:
How is this possible if no one is able to unlock their bootloader yet? ?
Click to expand...
Click to collapse
Why are you not able to unlock your bootloader?

TheKnux said:
How is this possible if no one is able to unlock their bootloader yet? ?
Click to expand...
Click to collapse
People on the t mobile varient are unable to unlock the bootloader. The international one plus 8 bought from one plus can be done easily enough.

TheKnux said:
How is this possible if no one is able to unlock their bootloader yet? ?
Click to expand...
Click to collapse
should have bought from oneplus website instead of your vendor.

Vio281 said:
should have bought from oneplus website instead of your vendor.
Click to expand...
Click to collapse
lol I think he knows that. Please do not start drama. He asked a question that literally implied he does not know much about this. I answered with exactly what you said. You literally butted in to basically sound mean when I said exactly what you said in a nicer form. Have a great day.

Im so happy with this damn phone, within 10 minutes it was unlocked! why can't others give you this option!!.

frankieuk said:
Im so happy with this damn phone, within 10 minutes it was unlocked! why can't others give you this option!!.
Click to expand...
Click to collapse
Have you tried twrp? I am waiting on my bootloader unlock. I'm excited to already have this.

Wait but @Dees_Troy said TWRP isn't currently supported on devices that ship with Android 10.
What is this black magic?

Any idea when the decryption part will start working ?
I upgraded to 10.5.7 GLOBAal and a magisk module is causing a boot loop. I tried to patch a a new boot.img but it's not working .
Would love to be able to flash magisk through twrp . Right now I need /data decrypted. Any idea ?

Can I make a copy of my persist partition with this TWRP? (only boot recovery, not flash)

Hi guys, i'm here again to ask for your support, actually with android 10 Google introduced a lot of changing, from dynamic partitions to the new keymaster 4 encryption/decryption. Teamwin is working hard to update TWRP but they will still take some time. Currently some things already work but there are difficulties in bringing them to the OnePlus 8/8 Pro, for example decryption already works but creates some problems on the OnePlus devices. That's why I decided to create a Paypal moneybox to be able to bring you the latest updates in the shortest time possible. As I have previously done, I assure you of a support of at least 2 years (within the limits of my possibilities). In addition to the TWRP I will improve the fastboot roms and add OnePlus 8/8 Pro to my TOOL ALL IN ONE (and maybe I will also bring the RevengeOS). By getting hold of a OnePlus 8 or 8 Pro I will also be able to improve the TWRP for OnePlus 7T and 7T Pro.
OnePlus 8/8 Pro PayPal MoneyBox: https://www.paypal.com/pools/c/8pfrIOL3Qa
If you are unable to participate in the PayPal moneybox, you can make a normal donation (perhaps specifying that it is for the moneybox), however all private donations that I will receive for this or other projects will be included in the moneybox.
Private PayPal Donations: https://www.paypal.me/MauronofrioTool

I want to thank all those who supported me, in 2 days I have already managed to buy the OnePlus 8 Pro, I will receive it in about a week and then I will immediately get to work. I will remove the link of the Paypal moneybox and let it close by itself so as to keep it in the historical (it will close tomorrow). A big thank you to everyone.

I rooted it without twrp but root explorer doesn't work as well. Because of I try to change UI sound in the system and it doesn't allow me to, I already grant root explorer to superuser but it still with issue. I'm not sure what's problem.

TWRP 3.3.1-1 TEST for OnePlus 8/ 8 Pro (instantnoodle):
Fixed Decryption;
TWRP 3.3.1-1 Test by mauronofrio

Unlocked from tmobile and was able to boot "twrp-3.3.1-0-instantnoodle-unified-mauronofrio" .. Other one gave me a qualcomm crash.

matteosaeed said:
Unlocked from tmobile and was able to boot "twrp-3.3.1-0-instantnoodle-unified-mauronofrio" .. Other one gave me a qualcomm crash.
Click to expand...
Click to collapse
Yes seems that on newer firmwares the test1 twrp is not able to decrypt, there are some problems in the decryption

mauronofrio said:
Yes seems that on newer firmwares the test1 twrp is not able to decrypt, there are some problems in the decryption
Click to expand...
Click to collapse
Yeah. I popped in a OTG and tried a backup. Let me know if you need anything tested.

[UNOFFICIAL] [TWRP] [PDX206] twrp for sony xperia 5 ii [FBEv2]

Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Working :
Basic twrp features
partially dual boot (different rom can be boot on both slots but still share same userdata, recommend to use fastboot method)
Decryption only support for fbev2 rom (example is some older rom, and kyasu lineageos)
otg / sdcard
Issues / Notes :
vibration is really wonky (which only happened on twrp, not orange fox) not quite fix, but it's stable enough to confirm
you might need to reflash rom "once" after you boot into recovery (flash twrp > boot to twrp > reboot to system (you'll see system corrupt) then reflash same rom that you currently using (via fastboot or twrp if rom support), after that it'll be fine. only on custom rom, stock is fine)
doesn't works with kyasu lineage due to using device model as ota assert (different than twrp ota assert, which is pdx206) fixed in latest build
doesn't support stock, due to different decryption key
ext4 only, no erofs and other models for now (1 ii and pro might release later, busy working new device tree for kumano)
format data, before flashing any rom (unless you doing a dirty flash)
For Stock users, use THIS TWRP instread this one
Big thanks :
most users on telegram for testing
christopher, for send me the device
clfbbn for kernel source
skkk (sekaiacg) for base device tree
Download : Link
device tree :
https://github.com/lolipuru/twrp_sony_pdx206
https://github.com/lolipuru/kernel_sony_sm8250
donation :
contact me via pm due to paypal is no longer able to receive money here

Nice work dude finally some development

I tested and it works on kyasu lineageos...

Nightmare_19 said:
I tested and it works on kyasu lineageos...
Click to expand...
Click to collapse
OTA probably won't work

The Xperia5ii PDX206 doesn't have an official LineageOS, so OTAs don't do much.

Nightmare_19 said:
I tested and it works on kyasu lineageos...
Click to expand...
Click to collapse
there's some problem on some roms for missing ota assert (tested on ricedroid), but if it works. no problem

Cannot install .zip files, neither slot A nor B work.

Nightmare_19 said:
Cannot install .zip files, neither slot A nor B work.
Click to expand...
Click to collapse
lineageos zip?
if lineageos zip, no it don't works. (different ota name)

Can install in au(Japan) version?

rifzan said:
Can install in au(Japan) version?
Click to expand...
Click to collapse
none of my tester (including me) have au devices, but if custom rom works then twrp should be fine

Sorry, but I didn't understand with which ROM(s) and version does this TWRP works.

And any OrangeFox would possibly be developed?
Well, thqnks for your replies

Yoannjap said:
And any OrangeFox would possibly be developed?
Well, thqnks for your replies
Click to expand...
Click to collapse
join xperia group on telegram you will find what you need there

Yoannjap said:
Sorry, but I didn't understand with which ROM(s) and version does this TWRP works.
Click to expand...
Click to collapse
tl;dr
- twrp works on android 12 (but decryption doesn't works on stock)
- twrp can't install lineageos (due to different device target, mine use pdx206 and lineage uase xq-as72)
(we're already discussed about device ota on dev group, so i'll use pdx206 for now, more custom rom in future will use pdx206 as target device)

Ok then, I am a real noob, I don't understand what does mean "PDX206".
I don't understand what you mean saying ‘due to different device target, mine use pdx206 and lineage uase xq-as72’.
To me, the XQ-AS72 is the code of the South Asian variant of Xperia 5 ii, whereas XQ-AS62/52/42 other variants.
Whereas PDX206 is just a codename meaning Xperia 5 ii (whatever variant of XQ-ASXX it is) used by I dunno who.
Am I wrong?

Yoannjap said:
Ok then, I am a real noob, I don't understand what does mean "PDX206".
I don't understand what you mean saying ‘due to different device target, mine use pdx206 and lineage uase xq-as72’.
To me, the XQ-AS72 is the code of the South Asian variant of Xperia 5 ii, whereas XQ-AS62/52/42 other variants.
Whereas PDX206 is just a codename meaning Xperia 5 ii (whatever variant of XQ-ASXX it is) used by I dunno who.
Am I wrong?
Click to expand...
Click to collapse
it's ota assert (in this case, target_device) that custom rom is set when flashing (to avoid flashing into wrong device)
lineage has been set for xq-as72 as default (don't confuse with device variants, ota assert or target_device doesn't affect with device variant that you use)
and twrp have been set to pdx206 (which is device codename for 5ii) so that's main reasons why it can't flash lineageos (but you can still access data normally)

Ok
Thank you loipuru, I got it now.

update,
- add xq-xx72 for lineageos flashing
the rest like /oem (for japanese variant) ltalabel and ta will come out later