Database Info

[ROMS][7.1.2][d838] Resurrection Remix N, LineageOS 14.1, Mokee N[stable]

Disclaimer:
/* **Your warranty is now void.** * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. * */
Resurrection Remix N
This rom is for D838 variant, maybe works on others, but I have not tested.
Working:
-Wifi
-Ril
-Camera (rear, front, video)
-Sound
-SDCard
-DT2W (Double tap to wake)
-Bluetooth
-NFC
Bugs:
-Tell me
LineageOS 14.1
Working:
-same as RR N
Bugs:
-same as RR N
Installation:
-same as RR N
Downloads:
Latest builds:
Mokee June Update:
-June security patch level
-Kernel and device tree updates
link : https://drive.google.com/open?id=1etfqN8e1C5VxvBdtyJmuSuDkIxRTg2vh
Mokee May Update:
-May security patch level
-Kernel and device tree updates
-Enabled zRam
link : https://drive.google.com/open?id=1El4BRvm0ehAMm7TzA1EiiHfRPYGDNGKr
February updates: (MOKEE N, LINEAGEOS 14.1, RR N
Download
Changelog:
-Kernel and device tree updates
-New governors and IO schedulers
-February security patch and ROM updates
(I'm gonna update RR and LineageOS soon)
December update:
https://drive.google.com/open?id=1jHwwNxaMJ91-iTOuSqm0jYRjzSuJO3jK[/SIZE][/B]
Only LineageOS is rooted, for other roms flash magisk.
Changelog:
-Kernel, device tree, rom updates
-December security patch level
Resurrection Remix N
RR-N-v5.8.5 20171010
link: https://1drv.ms/u/s!Ai3bT6KNVyQEiD62G-CtstEulJu0
news: RR updates, kernel updates, October security patch, etc
This is final build of RR based on Nougat
Lineage
lineage-14.1-20171013
link: https://1drv.ms/u/s!Ai3bT6KNVyQEiEArgg1WboOrj7B_
news: LineageOS updates, kernel updates, October security patch
This is final build of LineageOS based on Nougat[/B]
Installation:
You need twrp recovery by @xenius9 : https://forum.xda-developers.com/lg-g-pro-2/development/twrp-recovery-lg-g-pro-2-t3318686
1. MAKE BACKUP!!!
2. Push baseband , ROM and gapps to sdcard (copy cm13 zip and LP Baseband to sd card)
3. Make WIPE dalvik, data,cache(from recovery)(advanced wipe in twrp)
4. Install lollipop baseband
5. Install ROM
6. Install gapps
Additional links:
KK Baseband and kernel - https://yadi.sk/d/nVx3rb7MpheN9
LP Baseband and kernel(bumped)+KK bootloader - https://yadi.sk/d/_hz4jdQhpheNn
How to Restore previous ROM:
1. if you have KK based Rom - flash KK Baseband and restore ROM from Recovery
2. if you have LP based Rom - flash LP Baseband and restore ROM from Recovery
How to install twrp on kitkat:
1. You need ROOT
2. Download and install this apk: https://drive.google.com/file/d/0B4kfGU1z_PCla2pxMW9ZZWgzX3M/view?usp=sharing
3. Download updated TWRP zip and put to internal storage or sdcard: https://drive.google.com/file/d/0B0LH2ajSZjDpalVsQmpoTDBfTUE/view
4. Open installed app, grant root access, flash recovery
5. Reboot into recovery (via apk or power off phone, press power and volume down button until lg logo come up, release buttons for one second than press volume up and volume down, select yes and again yes. This will not erase your memory if you have TWRP flashed)
6. Flash updated TWRP
7. Reboot into recovery again
How to install TWRP on lollipop:
1. Need ROOT
2. Download and install LG drivers from here : https://drive.google.com/file/d/0B4kfGU1z_PClSWVlY0FGWWJoVFE/view?usp=sharing
3. Download and extract this files: https://drive.google.com/file/d/0B4kfGU1z_PClQ3AyM2lKOGR1S3M/view?usp=sharing
4. Enable usb debugging under developer options
5. Connect phone to pc via MTP
6. Run d838recovery.bat (You will see chinese language, just press any button to flash recovery)
7. Allow usb debugging and grant root access
8. DO NOT REMOVE USB CABLE
9. After finishing process press any key to reboot into TWRP recovery
TWRP 3.2.1-0
link: https://drive.google.com/file/d/1ADfHyz8ii6w_QErKkzhrKexTQ4a6cAXp/view?usp=sharing
to update from older twrp just flash zip
Recommended GAPPS (google apps) : http://opengapps.org/
Older builds
RR
link: https://drive.google.com/file/d/0B4kfGU1z_PClbmJUTkdGUnpYYlU/view?usp=sharing
Lineage
link: https://drive.google.com/open?id=0B4kfGU1z_PClbURaNm5ST1FMeVE
lineage-14.1-20170624
link: https://drive.google.com/file/d/0B4kfGU1z_PClRk5XV0pSS0hfMk0/view?usp=sharing
lineage-14.1-20170613
link: https://drive.google.com/open?id=0B4kfGU1z_PClSlBJd0djcWFHcDQ
Resurrection Remix M
Resurrection Remix M
-Based on @xenius9 Cyanogenmod 13
-Everything works
-Tested on D838 (I don't have F350 to test)
link: https://drive.google.com/file/d/0B4kfGU1z_PClaU02WVZMNHB0OVk/view?usp=sharing
LineageOS 13.0 (rebranded and updated CyanogenMod 13 )
Bugs: Same as CM13 and RR
Installation: Same as CM13 and RR
Link: https://drive.google.com/file/d/0B4kfGU1z_PClWDlobDhlSmZCbzA/view?usp=sharing
kernel and device tree sources: https://github.com/coavasic
thanks to:
@xenius9
RESURRECTION REMIX team
CyanogedMod
G2/G3 developers

Good, I am waiting for nuogat.

If I am already using Lollipop, do I need to flash lillipop baseband?
Does it have superSU, is it root?

yplim2300 said:
If I am already using Lollipop, do I need to flash lillipop baseband?
Does it have superSU, is it root?
Click to expand...
Click to collapse
No need, it has root

So nice?
I will flash it later.

Finished test on d838.
Done, its work very well! Vietnamese 99%, but isn't problem.
Best rom for me. But it play not good with stock rom. I play Mobius Final Fantasy with medium graphic and frame, some time it freeze 0,01s ^.^. Stock rom no problem. Can you fix it?

Hi, I am running this Rom now. So far so good no issue yet.
I found G Pro2 little slow though perhaps the storage or ram management.

which gapp should i should for this rom?i always get "unfortunately, google play has stopped"

g2mantap said:
which gapp should i should for this rom?i always get "unfortunately, google play has stopped"
Click to expand...
Click to collapse
i'm using this without any problem
https://www.androidfilehost.com/?fid=24591000424961929

coavasic said:
i'm using this without any problem
https://www.androidfilehost.com/?fid=24591000424961929
Click to expand...
Click to collapse
You flash this with Recovery?
We should choose ARM or ARM64 to download?

Yes, arm
Sent from my LG-D838 using Tapatalk

UPDATE: Let it go for a couple of hours and it seems fine OMG.
UPDATE 2: The second boot up takes a really long time too. I'm still waiting for it to boot up.
UPDATE 3: IT BOOTED UP! But it took seriously long. Tested Soft Reboot seems quick, now testing full reboot.
UPDATE 4: Seems like I should never do a full reboot or shut down on this. Holy **** it's long.
Not having a great time flashing this... Using TWRP 3.0.2-0 to flash the ROM somehow it doesn't go past starting apps. Doesn't seem to boot on CM13 as well.
I've tried:
- Full wipe (system, cache, dalvik, data) and normal wipe (cache, dalvik, data)
- Installing the ROM with and without GAPPS
- Installing LP Baseband & Kernel (found in CM13 thread) with ROM with and without GAPPS
ROM would refer to either RR and CM13.
No SD card inserted, tried having SIM card in or out, the only thing I have not tried is to put the camera back in (stock ROM works without camera).

how to install.. just flash baseband and rom and gapps? thats it? ty

pato2015 said:
how to install.. just flash baseband and rom and gapps? thats it? ty
Click to expand...
Click to collapse
Installation is same as CM13, if you are on lollipop/cm rom you don't need to flash baseband, just rom and gapps, if you are on kitkat flash lollipop baseband in cm13 thread.

@coavasic how long does it take for your phone to do a full reboot? Seems like it takes 45 minutes for mine to boot.

DJCrapsody said:
@coavasic how long does it take for your phone to do a full reboot? Seems like it takes 45 minutes for mine to boot.
Click to expand...
Click to collapse
about 1 min. It's just on this rom or same with cm13?

coavasic said:
about 1 min. It's just on this rom or same with cm13?
Click to expand...
Click to collapse
It's the same with CM13. Doesn't happen on stock or modded stock ROM though.
It's a LG D838 32GB Variant.
Update: Seems like the camera does not work after hooking it back up (it works when I'm on Stock ROM), could it be because the system has already registered it as a non-camera device as I did flash it without the camera hooked up. But I did also flash the Stock ROM without the camera and hooking the camera back on still allowed it to work... Hmm....
Update 2: Device feels sluggish compared to when on the stock ROM, when lucky, app just lags for a second, when unlucky, it hangs for a few minutes then crashes.

@coavasic it's definitely a CM thing, I just reflashed a modified stock ROM (Sphinx Pro v5a) and it booted up in seconds.

coavasic said:
-Based on @xenius9 Cyanogenmod 13
-Everything works
-Tested on D838 (I don't have F350 to test)
link: https://drive.google.com/file/d/0B4kfGU1z_PClaU02WVZMNHB0OVk/view?usp=sharing
kernel and device tree sources: https://github.com/coavasic
I will create this rom based on CM14.1 (nougat) when we have all basic functions working on Cm14.1
thanks to:
@xenius9
RESURRECTION REMIX M team
CyanogedMod
G2/G3 developers
Click to expand...
Click to collapse
just as suggestion....stock camera for this rom is not really good perfomance becoz the image not so bright......i already try installing lenovo super camera version 3.6.7 and it give much better result...hope u can replace the stock camera app

Working Perfectly On LG G Pro 2 F350S, Thanks For Beautiful ROM

[ROM] [REPACK] [ 5.1.1 ] RC5 Lollipop Jiayu S3 & S3 Pro [MT6752]

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is the well known Build of Jiayu Germany Lollipop Release Candidate 5 (latest) for Jiayu S3 (Advance/Basic) with MTK 6752 SoC
There's also a modified version , for the new Jiayu s3 Pro ( with 32GB of internal memory ) also MTK6752
This is being posted here, as this is a full SPFlashTools "Base" ROM, usually used to recover your device
( or if you want to roll back to Lollipop ...)
The "REPACK" Version is simply the same RC5 Rom, but with latest M.A.D. TWRP already included
There's also a modified version for the s3 Pro (32GB)
The Rom should be flashed in "UPGRADE MODE" on SPFlashTools. (Doesn't matter in what ROM / OS you currently are ...)
DO NOT flash any SP Flash Tools Jiayu s3 (old 16gb) roms on the new Jiayu s3Pro (32GB)
--> Preloader, partitions are different, you'll get an hard brick.
Installation Instructions:
BACKUP EVERYTHING, This will ERASE everything from your internal phone memory (pics, videos, data, etc )
Turn OFF the phone
Open MediaTek SPFlashTools
Load mt6752 Scatter
Choose "Upgrade Mode"
Press "Download"
At this moment, plug USB Cable to phone, it'll start flash ...
Some Jiayu S3, require BOTH Volume Keys to be pressed , while you plug USB Cable to enter in "download Mode"
If you wish to upgrade to latest M.A.D. Android Nougat, after you flashed RC5, it's recommended that you let the RC5 boot up, then you can go back to recovery ( Latest M.A.D. Recovery included already)
Place AOSP Nougat Rom on internal memory/ external SDCard
WIPE ALL
Flash AOSP and GAPPS & SuperSu (latest two optional)
Download ROMs from "XDA DevDB Download Section"
Choose the right rom, for your Jiayu S3 variant (s3 advance / basic 16GB) or ( s3 pro 32GB )
Working:
Everything
The Rom Changelogs, and old discussion can be found on this thread :
https://forum.xda-developers.com/jiayu-s3/development/rom-jiayu-s3-5-1-1-t3217241
GPL Compliance:
https://github.com/MediatekAndroidDevelopers
XDA:DevDB Information
[ROM] [REPACK] [ 5.1.1 ] RC5 Lollipop Jiayu S3 & S3 Pro [MT6752], ROM for the JiaYu S3
Contributors
superdragonpt, DerTeufel1980
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: SP Flash Tools
Based On: MediaTek AOSP
Version Information
Status: Stable
Created 2017-01-25
Last Updated 2017-01-25

Reserved
,,,,,,,,,,,,,,

Please include boot from AICP 10 (with fixed wi-fi hotspot).

superdragonpt said:
ROMs will take a while to be uploaded ...
slow speed...
Click to expand...
Click to collapse
thanks man.....
waiting for the s3 pro version....

My net provider is having issues, I currently have no home connection, hopefully they'll fix this today, for me to upload
Bb

ROMs being uploaded

superdragonpt said:
ROMs being uploaded
Click to expand...
Click to collapse
thank you so much...
hope flashing rc5 and then stable 7 fix my low signal connection on s3 pro

All done ...

Can you also upload the SPFT flash tool so that people would use a similar version and reduce variables and become easier to debug when a problem arises?

I'm sorry for the stupid question but are de download links?
Have searched in the download section but keeps sending me back to this post!
Enviado do meu Redmi Note 3 através de Tapatalk

Found it, sorry for double post!
Enviado do meu Redmi Note 3 através de Tapatalk

Upgrade successfull!
Thank you. This has helped me gretly with my quest to upgrade 4.4 -> 5.x -> 7.x.
I had a problem with uploading through SP Flash Tool that it wouldn't start to download to phone, but after many tries i finally changed USB port, and then it worked like a charm.
I have a question though. Should i stay on this ROM or upgrade to 6.0.1 or what? The problem is that Xposed framework does not work yet with 7.x, so untill it does, i will stay on system that does support it.

AgiZ10 said:
Thank you. This has helped me gretly with my quest to upgrade 4.4 -> 5.x -> 7.x.
I had a problem with uploading through SP Flash Tool that it wouldn't start to download to phone, but after many tries i finally changed USB port, and then it worked like a charm.
I have a question though. Should i stay on this ROM or upgrade to 6.0.1 or what? The problem is that Xposed framework does not work yet with 7.x, so untill it does, i will stay on system that does support it.
Click to expand...
Click to collapse
Then go with AICP11 MM its the best MM rom for the phone with xposed (mm) available ...

superdragonpt said:
Then go with AICP11 MM its the best MM rom for the phone with xposed (mm) available ...
Click to expand...
Click to collapse
Thanks, done.
Will continue replying there if something comes bugs me

A huge thank you for the s3pro version. I have just bought a second S3 32gb without knowing that it was different to my old S3 32gb, and bricked it trying to install the old rc5 that is on my old phone. This version rescued the phone from death!!
Can I use TWRP to install SuperSU and root it? I'm guessing there's zero chance of flashing 7.1.1 on the s3pro.

StoneTheKiwis said:
A huge thank you for the s3pro version. I have just bought a second S3 32gb without knowing that it was different to my old S3 32gb, and bricked it trying to install the old rc5 that is on my old phone. This version rescued the phone from death!!
Can I use TWRP to install SuperSU and root it? I'm guessing there's zero chance of flashing 7.1.1 on the s3pro.
Click to expand...
Click to collapse
I've just found that the recovery is the chinese one, not twrp. Reflashing just recovery does not change this. The build number is 20160302-190806. Any ideas on what might have happened here?

I made this thread mainly for the newer s3 33GB variant...
Since I also got the 32gb variant, after my old s3 died
You just need to follow instructions on the first post
Download full rc5 repack for the 32GB variant
And flash in "upgrade mode"
You,ll get the newer MAD twrp, that is also Nougat compatible.
After flash, just boot to recovery , full wipes (including data, and flash newer Nougat release)
Cheers

superdragonpt said:
I made this thread mainly for the newer s3 33GB variant...
Since I also got the 32gb variant, after my old s3 died
You just need to follow instructions on the first post
Download full rc5 repack for the 32GB variant
And flash in "upgrade mode"
You,ll get the newer MAD twrp, that is also Nougat compatible.
After flash, just boot to recovery , full wipes (including data, and flash newer Nougat release)
Cheers
Click to expand...
Click to collapse
Thanks for your reply. I've just done it all again - downloaded the PRO pkg afresh and flashed as 'upgrade', but again booting to recovery shows a chinese menu. I also flashed in 'format all' mode, but the same result. I'm downloading the pkg from the 'downloads' section of this forum, and it unpacks to show recovery as 'S3_h560_TWRP_3.0.2-0' at 13,074kb. The recovery from the old rc5 pkg is a different size - I suppose that can't be used without rewriting the scatter file? Or does the scatter file reference the recovery that's recommended for your latest 7.1.1 rom? I could just get that separately and copy it in.
Apart from blaming the pixies, I really don't understand what is going wrong here.

Stranger and stranger. I replaced the recovery with the one hosted on mediafire for 7.1.1 (though that has a space in the filename which had to be removed for the scatter txt to recognise it) and after flashing the phone was bricked. Then replaced recovery with the one from rc5 and again it was bricked. Then unpacked afresh the pro pkg and flashed with that in 'format all' mode - this time it booted to chinese recovery but refused to boot normally. Then reflashed in 'upgrade' mode and now it boots normally but refuses to boot to recovery. Perhaps the hardware has been changed even further, or perhaps the gods are just laughing at me, but I've run out of options now. The problem is that supersu won't install without updating itself (though it's 2.79) and it fails to update under the 'normal' update option and doesn't have a twrp recovery to update through. Hence the phone can't be rooted.

Sorry for this question, please how can I revert to this ROM I'm already on 7,1.2, what does repack means or how should I repack it ,any possible way to use spflashtool for this ROM, your answer is highly needed urgently please to whom ever knew

[ROM] [Noguat 7.0] K55020a Stock Rooted Odex for T-Mobile LG Stylo 2 Plus[06/02/2017]

[ROM] [Noguat 7.0] K55020a Stock Rooted Odex for T-Mobile LG Stylo 2 Plus​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Introduction
This is the based on the official latest K55010a 7.0 Noguat for T-Mobile LG Stylo 2 Plus (K550)
Click to expand...
Click to collapse
Features
Rooted
Busybox
Odex
Added init.d support
Remove dm-verify
Remove force encrypt
Replaced T-mobile bootanimation with Google pixel bootanimation
Removed boot sound
Debloated version available with lots of bloat applications removed which can be downloaded via Playstore
Click to expand...
Click to collapse
Requirements
T-Mobile LG Stylo 2 Plus (K550)
TWRP recovery
Noguat bootloader
Click to expand...
Click to collapse
Installation
Backup your device, in case you wanted to revert back.
Wipe Data/Factory Reset in TWRP recovery.
Flash the ROM
Reboot
First boot will take around 10-15 minutes
Click to expand...
Click to collapse
If you like my work, then press Thanks button to show your appreciation. If you are feeling generous you can also donate to me :good:
Enjoy!!!
XDA:DevDB Information
[ROM] [Noguat 7.0] K55020a Stock Rooted Odex for T-Mobile LG Stylo 2 Plus[06/02/2017], ROM for the Android General
Contributors
pvsgh
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Nougat Bootloader
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2017-06-02
Created 2017-06-02
Last Updated 2017-08-17

Screenshots: ​

Downloads ​
Odex Version:
K55020a_stock_odex.zip
Debloated Odex Version:
K55020a_stock_odex_debloated.zip
Stock Kernel:
K55020a_stock_kernel.zip
Click to expand...
Click to collapse

Question and Answers
Q. What works?
A. Everything, nothing removed. debloated version available with some of t-mobile/google apps removed which can be downloaded from play store.
Q. Wifi Calling ?
A. Yes, wifi calling works. It is based on the T-Mobile firmware.
Q. Is there a way to remove the root from this ROM?
A. Yes, you can flash UPDATE-unSU-signed.zip file this URL.. Don't forget to install the Stock Kernel after unroot or you will boot loop.
Q. How do I install Xposed Framework?
A. Currently there is no xposed framework available for Nougat(7.x)​

reserved4

reserved5

reserved6... last one

Thanks so much for this, i will be downloading this and giving it a try!!
---------- Post added at 07:37 PM ---------- Previous post was at 07:35 PM ----------
Did you add a modified stock kernel or anything like that to this?

Not sure what boot loader I have. Pretty sure it isn't nougat though. Think it'll brick my device? MM Rom and kernel from u and twrp installed.

gnino said:
Not sure what boot loader I have. Pretty sure it isn't nougat though. Think it'll brick my device? MM Rom and kernel from u and twrp installed.
Click to expand...
Click to collapse
I already tried flashing this on my marshmallow k550 and it bricked and kept looping when it booted up, you will need to update to nougat so you can also get the nougat bootloader and such. I am using it on my nougat k550 and it's working great ? just wished i backed up my data as i accidentally deleted everything ?

puzzimassa said:
Thanks so much for this, i will be downloading this and giving it a try!!
---------- Post added at 07:37 PM ---------- Previous post was at 07:35 PM ----------
Did you add a modified stock kernel or anything like that to this?
Click to expand...
Click to collapse
Yes, dm-verity patch is applied to stock kernel, otherwise if you install the stock kernel and reboot the device by mistake, device will be encrypted.
gnino said:
Not sure what boot loader I have. Pretty sure it isn't nougat though. Think it'll brick my device? MM Rom and kernel from u and twrp installed.
Click to expand...
Click to collapse
Nougat bootloader is required, it is mentioned in the Requirements for the ROM.
puzzimassa said:
I already tried flashing this on my marshmallow k550 and it bricked and kept looping when it booted up, you will need to update to nougat so you can also get the nougat bootloader and such. I am using it on my nougat k550 and it's working great just wished i backed up my data as i accidentally deleted everything
Click to expand...
Click to collapse
Yes, Nougat bootloader is required. Also ROM will not delete/wipe anything on internal sdcard.

I'm having problems with google play services, it won't update from 10 to 11 and so google assistant isn't working, any advice or help?

puzzimassa said:
I'm having problems with google play services, it won't update from 10 to 11 and so google assistant isn't working, any advice or help?
Click to expand...
Click to collapse
So you don't get option to update the google services? usually you should get a message like " this application won't run unless you update play services" then only you can see and update play services in play store.

So I had downloaded and installed the debloated marshmallow version and it's working great. And of course has the marshmallow bootloader so if I wanted to update from where I am to the debloated nougat version with the nougat bootloader how would I go about this?

pvsgh said:
So you don't get option to update the google services? usually you should get a message like " this application won't run unless you update play services" then only you can see and update play services in play store.
Click to expand...
Click to collapse
That's not happening for me and idk why, maybe i need to flash back to stock

So I'm guessing it's fine to flash without wiping or factory reset i did works get very stable noticed the lag is gone with going from an open app to home screen thanks nice work

Is anyone working on xposed?

Awesome
Thanks for the work and effort!!!!

To clarify; will bootloader only flash from OTAs or do I just need to go through stock N before flashing this?

Any chance for metroPCS users
Any chance for metroPCS users?
I like this phone but the rooted/debloated version would a significant upgrade.

[ROM][PRA-LX1] Haky86's LineageOS 15.1 Oreo Huawei P8 Lite 2017

LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage OS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Do not copy my works or steal fixes without giving any credits..or gather it by yourself if you have the right knowledge.​
Downloads
03/05/2020
lineage-15.1-20200503-UNOFFICIAL-hi6250.zip
Fix mostly everything.
SPL: April 2020.
Note
Special thanks to XDA-Developers for putting this rom to the news feed, it was a pleasure.
Contributors
haky 86, phhusson
Source Code: https://github.com/hak86/device_phh_treble
kernel GPL: Due to Project Treble, my roms doesn't use any pre-compiled kernel because it's using the stock kernel that can be found in UPDATE.APP's kernel.img.
https://github.com/hak86/android_kernel_huawei_hi6250
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.0.0 PRA-LX1 C432B322 8.0.0(C432log)
Version Information
Status: Stable
Current Stable Version: 8.1
Stable Release Date: 2018-04-06
Created 2018-04-06
Last Updated 2018-06-16

Reserved
Here the screen shots in attached files

I have problems booting your ROM. Im running atm on my pralx1 (rebranded to cn) AOSP 8.1. This Treble rom is booting without problems. I installed this lineage img via fastboot and twrp but after the warning screen the device will not boot the rom and restarts the device everytime. Then i flashed the aosp 8.1 img again with twrp and it booted without problems. Im also not able to revert to EMUI 8 btw. Same problem and idk what is wrong.
-----------------------------------------------------------------
Edit: v.08.04.2018
Solved. Magisk caused the problem. Only way (and fastest) to solve it, was to load a backup from the same device on which is this Lineage ROM already booting (thx to @Striike) or just no Magisk installed before.
(I tried to install Magisk after booting up this ROM and it caused the same booting issue).

Haky, good job on being on the news feed! Congratulations!

All hail @haky 86
Our little PRA, one of the first devices having Treble Lineage, I am really impressed.

MIcHiJK said:
I have problems booting your ROM. Im running atm on my pralx1 (rebranded to cn) AOSP 8.1. This Treble rom is booting without problems. I installed this lineage img via fastboot and twrp but after the warning screen the device will not boot the rom and restarts the device everytime. Then i flashed the aosp 8.1 img again with twrp and it booted without problems. Im also not able to revert to EMUI 8 btw. Same problem and idk what is wrong.
Click to expand...
Click to collapse
install it same like you install aosp 8, the most important to not wipe system partition of emui8, it's a mandatory to boot. also format data

CarlosAG10 said:
All hail @haky 86
Our little PRA, one of the first devices having Treble Lineage, I am really impressed.
Click to expand...
Click to collapse
I already fix signal plus switching between networks and NFC(partially for some noisy reason won't enable) then I'll release AOSPA Pa Treble-enabled

haky 86 said:
I already fix signal plus switching between networks and NFC(partially for some noisy reason won't enable) then I'll release AOSPA Pa Treble-enabled
Click to expand...
Click to collapse
The fingerprint on a p9lite2017 would work ?(i know p8 and p9 2017 the same internals almost)

Is there an External SDCard problem?

YoussefR said:
Is there an External SDCard problem?
Click to expand...
Click to collapse
same as aosp. I will check the issue once fix the NFC (already working on it)

Well done man. Hope to get stable oero soon to try it out...??

Reserved
07/04/2018:
https://basketbuild.com/filedl/devs?dev=haky86&dl=haky86/HuaweiP8Lite2017/Roms/Android-8.0/lineage-15.1-treble-prague-07042018.tar.gz
ChangeLogs:
07/04/2018:
fix signal.
fix switching between networks.
Warning issue about mismatch vendor image, this bug appear on all treble devices as they told me, the only to see if to fix is by waiting the next update of emui 8 for our hi6250.
sdcard it's work but after some reboot.

how to flash gapps?

haky 86 said:
07/04/2018:
https://basketbuild.com/filedl/devs....0/lineage-15.1-treble-prague-07042018.tar.gz
ChangeLogs:
07/04/2018:
fix signal.
fix switching between networks.
Warning issue about mismatch vendor image, this bug appear on all treble devices as they told me, the only to see if to fix is by waiting the next update of emui 8 for our hi6250.
sdcard it's work but after some reboot.
Click to expand...
Click to collapse
Already? Legend!

jeuxtype said:
how to flash gapps?
Click to expand...
Click to collapse
I will include in next build for both gapps and su probably nfc fix too.

Did you make a TWRP for Oreo on this device?

Great Work! Just would like to know if there's a way to get the stock camera on this Rom.

MIcHiJK said:
I have problems booting your ROM. Im running atm on my pralx1 (rebranded to cn) AOSP 8.1. This Treble rom is booting without problems. I installed this lineage img via fastboot and twrp but after the warning screen the device will not boot the rom and restarts the device everytime. Then i flashed the aosp 8.1 img again with twrp and it booted without problems. Im also not able to revert to EMUI 8 btw. Same problem and idk what is wrong.
Click to expand...
Click to collapse
hey ,can you tell me how you installed oreo? i have rebranded my phone but i cant find a working guide...

Striike said:
Great Work! Just would like to know if there's a way to get the stock camera on this Rom.
Click to expand...
Click to collapse
camera is fully works same as stock, I will add the port of Huawei Camera but in next build, actually I'm trying to include gapps and su
mateiocristi said:
hey ,can you tell me how you installed oreo? i have rebranded my phone but i cant find a working guide...
Click to expand...
Click to collapse
follow this, first you must to convert to nougat al00 then update b220 (I did like 3-4 times to fix test-keys)
https://forum.xda-developers.com/p8.../guide-holy-emui8-treble-rom-pra-lx1-t3773216

Why not support emui 5.x upgrade? Is the source code problem?

[UNOFFICIAL] [TWRP] [PDX206] twrp for sony xperia 5 ii [FBEv2]

Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Working :
Basic twrp features
partially dual boot (different rom can be boot on both slots but still share same userdata, recommend to use fastboot method)
Decryption only support for fbev2 rom (example is some older rom, and kyasu lineageos)
otg / sdcard
Issues / Notes :
vibration is really wonky (which only happened on twrp, not orange fox) not quite fix, but it's stable enough to confirm
you might need to reflash rom "once" after you boot into recovery (flash twrp > boot to twrp > reboot to system (you'll see system corrupt) then reflash same rom that you currently using (via fastboot or twrp if rom support), after that it'll be fine. only on custom rom, stock is fine)
doesn't works with kyasu lineage due to using device model as ota assert (different than twrp ota assert, which is pdx206) fixed in latest build
doesn't support stock, due to different decryption key
ext4 only, no erofs and other models for now (1 ii and pro might release later, busy working new device tree for kumano)
format data, before flashing any rom (unless you doing a dirty flash)
For Stock users, use THIS TWRP instread this one
Big thanks :
most users on telegram for testing
christopher, for send me the device
clfbbn for kernel source
skkk (sekaiacg) for base device tree
Download : Link
device tree :
https://github.com/lolipuru/twrp_sony_pdx206
https://github.com/lolipuru/kernel_sony_sm8250
donation :
contact me via pm due to paypal is no longer able to receive money here

Nice work dude finally some development

I tested and it works on kyasu lineageos...

Nightmare_19 said:
I tested and it works on kyasu lineageos...
Click to expand...
Click to collapse
OTA probably won't work

The Xperia5ii PDX206 doesn't have an official LineageOS, so OTAs don't do much.

Nightmare_19 said:
I tested and it works on kyasu lineageos...
Click to expand...
Click to collapse
there's some problem on some roms for missing ota assert (tested on ricedroid), but if it works. no problem

Cannot install .zip files, neither slot A nor B work.

Nightmare_19 said:
Cannot install .zip files, neither slot A nor B work.
Click to expand...
Click to collapse
lineageos zip?
if lineageos zip, no it don't works. (different ota name)

Can install in au(Japan) version?

rifzan said:
Can install in au(Japan) version?
Click to expand...
Click to collapse
none of my tester (including me) have au devices, but if custom rom works then twrp should be fine

Sorry, but I didn't understand with which ROM(s) and version does this TWRP works.

And any OrangeFox would possibly be developed?
Well, thqnks for your replies

Yoannjap said:
And any OrangeFox would possibly be developed?
Well, thqnks for your replies
Click to expand...
Click to collapse
join xperia group on telegram you will find what you need there

Yoannjap said:
Sorry, but I didn't understand with which ROM(s) and version does this TWRP works.
Click to expand...
Click to collapse
tl;dr
- twrp works on android 12 (but decryption doesn't works on stock)
- twrp can't install lineageos (due to different device target, mine use pdx206 and lineage uase xq-as72)
(we're already discussed about device ota on dev group, so i'll use pdx206 for now, more custom rom in future will use pdx206 as target device)

Ok then, I am a real noob, I don't understand what does mean "PDX206".
I don't understand what you mean saying ‘due to different device target, mine use pdx206 and lineage uase xq-as72’.
To me, the XQ-AS72 is the code of the South Asian variant of Xperia 5 ii, whereas XQ-AS62/52/42 other variants.
Whereas PDX206 is just a codename meaning Xperia 5 ii (whatever variant of XQ-ASXX it is) used by I dunno who.
Am I wrong?

Yoannjap said:
Ok then, I am a real noob, I don't understand what does mean "PDX206".
I don't understand what you mean saying ‘due to different device target, mine use pdx206 and lineage uase xq-as72’.
To me, the XQ-AS72 is the code of the South Asian variant of Xperia 5 ii, whereas XQ-AS62/52/42 other variants.
Whereas PDX206 is just a codename meaning Xperia 5 ii (whatever variant of XQ-ASXX it is) used by I dunno who.
Am I wrong?
Click to expand...
Click to collapse
it's ota assert (in this case, target_device) that custom rom is set when flashing (to avoid flashing into wrong device)
lineage has been set for xq-as72 as default (don't confuse with device variants, ota assert or target_device doesn't affect with device variant that you use)
and twrp have been set to pdx206 (which is device codename for 5ii) so that's main reasons why it can't flash lineageos (but you can still access data normally)

Ok
Thank you loipuru, I got it now.

update,
- add xq-xx72 for lineageos flashing
the rest like /oem (for japanese variant) ltalabel and ta will come out later