Related
Install CWM 5.5.0.4, Root, BusyBox & Init.d Support(NEW METHOD)
Samsung Galaxy Ace Plus (GT-S7500)
Requirements :
Odin3 Flash Program
CWM Package
SuperSU Package
BusyBox.zip
Windows PC
Samsung Drivers Installed (Get from Here If not installed)
GT-S7500 only
Disclaimer:
Make Sure you have GT-S7500 only and no other variant.
Make Sure you are ready with all the stuffs mentioned above
You are Doing all this at your own risk
No developer will be responsible if you Brick your device
CWM Procedure:
Download all the things Mentioned Above
Extract Odin3.zip
Extract cwm-trebon.zip and place it inside Odin3 folder
Copy UPDATE-SuperSU-vx.xx.zip and Busybox.zip to root of External SD of your Phone
Now Open Odin3 v1.85.exe
Check Auto Reboot, F. Reset Time & PDA only
Uncheck everything that is not mentioned above
Now Click on PDA and select cwm-trebon.tar.md5
Boot your Phone in Download Mode by Pressing Volume Down Key + Home Key + Power Button together
Now Press Volume Up to Continue
Now the Phone is Ready to be connected to PC
Connect your Phone to PC
Odin3 will detect your Phone and The Box will turn yellow
Now Recheck whether every thing mentioned above is done or not
Now hit Start Button to begin Flashing
After flashing is done the phone will reboot
Now the CWM is installed
Now follow Rooting Procedure
Rooting + BusyBox Procedure:
Boot your Phone in CWM mode by Pressing Volume Up Key + Volume Down Key + Home Key + Power Button together
Now in CWM navigate to Install Zip From SDcard using Volume Keys
Now Select Choose Zip from SDcard by pressing Home Key
Now select UPDATE-SuperSU-vx.xx.zip
Select Yes to Install
Now select BusyBox.zip
Select Yes to Install
After Install is done Reboot Your Phone
Now you are Rooted with Init.d Support
Note :
The Yellow Triangle at boot doesn't matter You can remove it by Using Triangle Away App from Here
(GUIDE FOR TRIANGLE AWAY ON MY FAQ THREAD)
Don't forget to Visit This FAQ thread
Credits :
mb-14
Chainfire
Nice work pawan !
keep it up!!:laugh::laugh:
you rock for ace plus!!!
Awesome
Sent from my GT-I9500 using Tapatalk 2
Guide Updated
why don't you make a package file flashable root (SuperSU + BusyBox) to be more efficient
I have a question. After this root, stock recovery will be replaced by CWM. So is it possible to go back to stock recovery after rooting?? And If it is possible then will be noticeable by samsung if I go to samsung care??
I'm new in rooting....
Jayadratha Mondal said:
I have a question. After this root, stock recovery will be replaced by CWM. So is it possible to go back to stock recovery after rooting?? And If it is possible then will be noticeable by samsung if I go to samsung care??
I'm new in rooting....
Click to expand...
Click to collapse
Yes, You can go back to stock recovery any time you want, just flash stock rom and you will also be unrooted.
Flashing and installing new roms from CWM is different??
Flashing and installing new roms from CWM is different?? I mean in case of installing from CWM, no flashing occurs?? May be its a dump like question but please answer..
1. I want to know the differences between flashing and installing roms from CWM
2. All are those attached files latest versions? i.e CWM, busybox & SuperSU?
Jayadratha Mondal said:
Flashing and installing new roms from CWM is different?? I mean in case of installing from CWM, no flashing occurs?? May be its a dump like question but please answer.. I want to know the differences between flashing and installing roms from CWM
Click to expand...
Click to collapse
We flash Stock Rom using Odin and We install Custom Rom using CWM.
Flashing Stock Rom using Odin includes the whole firmware of our phone including Stock Recovery And Installing Custom Rom from CWM includes Only System folder and kernel.
kk9999gada said:
We flash Stock Rom using Odin and We install Custom Rom using CWM.
Flashing Stock Rom using Odin includes the whole firmware of our phone including Stock Recovery And Installing Custom Rom from CWM includes Only System folder and kernel.
Click to expand...
Click to collapse
Ok both odin and CWM flashes the NAND memory then??
& all are those attached files latest versions? i.e CWM, busybox & SuperSU? Or I can get more latest versions of those files.?
Jayadratha Mondal said:
Ok both odin and CWM flashes the NAND memory then??
& all are those attached files latest versions? i.e CWM, busybox & SuperSU? Or I can get more latest versions of those files.?
Click to expand...
Click to collapse
Yes, all the files attached are latest version.
kk9999gada said:
Yes, all the files attached are latest version.
Click to expand...
Click to collapse
When I flashed CWM now its shows a yellow triangle. So is it necessary to remove using the app before installing custom rom of yours or do that after rom installation???
Sent from my GT-I9300 using xda premium
nightwing90 said:
When I flashed CWM now its shows a yellow triangle. So is it necessary to remove using the app before installing custom rom of yours or do that after rom installation???
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It's not necessary to remove it, however, it's better to do so before any rom installation (just in case your rom installation went wrong and you needed to take your phone to samsung care/service center).
Thanks for the wonderful tutorial and effort!
Worked like a charm!
Cheers :good:
Hello guys. One question - why after this rooting, my wifi ability just gone? I can find a wireless networks, i can apply the password, but i can see only "Obtaining IP address..." ?
MoHuToP said:
Hello guys. One question - why after this rooting, my wifi ability just gone? I can find a wireless networks, i can apply the password, but i can see only "Obtaining IP address..." ?
Click to expand...
Click to collapse
The problem must be in connection. It is not due to rooting.
kk9999gada said:
The problem must be in connection. It is not due to rooting.
Click to expand...
Click to collapse
Yes, it looks like bad wireless home network. Thanks for the info!
The method is easy and well constructed, but I want to add something else:
I think is better to add in step 4 - Copy SuperSU-v1.25.zip and BusyBox.zip to root of External SD of your Phone
Newbies will avoid to turn off their devices.
+1 thanks or thumbs up or etc. for ya ; )
Odin has two yellow box and hanging at setup connection
kk9999gada said:
Install CWM 5.5.0.4, Root, BusyBox & Init.d Support(NEW METHOD)
Samsung Galaxy Ace Plus (GT-S7500)
Requirements :
Odin3 Flash Program
CWM Package
SuperSU Package
BusyBox.zip
Windows PC
GT-S7500 only
Pre-Requisites:
Don't forget to install drivers before doing anything
Make Sure you have GT-S7500 only and no other variant.
Make Sure you are ready with all the stuffs mentioned above
You are Doing all this at your own risk
No developer will be responsible if you Brick your device
CWM Procedure:
Download all the things Mentioned Above
Extract Odin3.zip
Extract cwm-trebon.zip and place it inside Odin3 folder
Copy SuperSU-v1.25.zip and Busybox.zip to root of External SD of your Phone
Now Open Odin3 v1.85.exe
Check Auto Reboot, F. Reset Time & PDA only
Uncheck everything that is not mentioned above
Now Click on PDA and select cwm-trebon.tar.md5
Boot your Phone in Download Mode by Pressing Volume Down Key + Home Key + Power Button together
Now Press Volume Up to Continue
Now the Phone is Ready to be connected to PC
Connect your Phone to PC
Odin3 will detect your Phone and The Box will turn yellow
Now Recheck whether every thing mentioned above is done or not
Now hit Start Button to begin Flashing
After flashing is done the phone will reboot
Now the CWM is installed
Now follow Rooting Procedure
Rooting + BusyBox Procedure:
Boot your Phone in CWM mode by Pressing Volume Up Key + Volume Down Key + Home Key + Power Button together
Now in CWM navigate to Install Zip From SDcard using Volume Keys
Now Select Choose Zip from SDcard by pressing Home Key
Now select SuperSU-v1.25.zip
Select Yes to Install
Now select BusyBox.zip
Select Yes to Install
After Install is done Reboot Your Phone
Now you are Rooted with Init.d Support
Note :
The Yellow Triangle at boot doesn't matter You can remove it by Using Triangle Away App from Here
Don't forget to Visit This FAQ thread
Credits :
mb-14
Chainfire
Click to expand...
Click to collapse
Hi kk9999gada
Odin is hanging at Setup connection. I tried all solutions mentioned on this forum and google and tried different Odin versions but still no luck.
could u plz suggest some way or any other replacement of odin. I am new to rooting and very excited to do and worked very hard to resolve that setup connection issue but couldn't find any way yet ... ...
one more thing i noticed that i can see two yellow box in Odin after connecting my mobile to PC 0:COM22 and 1:COM16 .. is it usual.. i saw many screenshot on this forum no one show 2 yellow box.... this happens when i 1st start Odin then connect phone to pc but when i connect phone to pc 1st and then start Odin then only one yellow box is visible that is 0:COM22...please suggest....
aronxda said:
Hi kk9999gada
Odin is hanging at Setup connection. I tried all solutions mentioned on this forum and google and tried different Odin versions but still no luck.
could u plz suggest some way or any other replacement of odin. I am new to rooting and very excited to do and worked very hard to resolve that setup connection issue but couldn't find any way yet ... ...
one more thing i noticed that i can see two yellow box in Odin after connecting my mobile to PC 0:COM22 and 1:COM16 .. is it usual.. i saw many screenshot on this forum no one show 2 yellow box.... this happens when i 1st start Odin then connect phone to pc but when i connect phone to pc 1st and then start Odin then only one yellow box is visible that is 0:COM22...please suggest....
Click to expand...
Click to collapse
Please don't Quote the whole OP it is against xda rules.
You should boot in download mode in order to flash anything via Odin.
Just got this phone, really cheap quad core (MTK 6589) 5.5" android phone but pretty decent quality.
Here's some tools I've collected for whoever else gets this phone:
Recovery
CWM 6.0.3.0
Root Script
ADB script to root this device
Partition
This will repartition/shrink the internal SD so that the data partition is about 2.5gig, if you wish to disable the remaining internal SD and use external SD only you can flash the enable/disable internal SD zip files.
SP Flash Tools
Use this to flash the Recovery and Partition files. Just point the program to the scatter file and click download. You'll need the MTK drivers located if you haven't, then once you have clicked download just plug your device in without battery and it will flash it.
Factory Rom
If something goes wrong you can use SP Flash Tools to flash the factory rom here:
http://www.needrom.com/mobile/feiteng-h7189-2/
Download:
https://www.dropbox.com/sh/z9a99r56llx8zs5/Gj2-LNcuhx
Thanks for sharing it ! :good:
But how to use the repartition?
What should i do after browse the scatter file?
d3kilo said:
Thanks for sharing it ! :good:
But how to use the repartition?
What should i do after browse the scatter file?
Click to expand...
Click to collapse
Hey replace the files you flash with the partition ones then flash it. Click download once you've chosen scatter file. You'll need to put your phone in factory mode, I just took the battery out, held volume up and plugged it in.
Double trouble
I just bricked my device in the process of rooting and installing custom ROM. Nowe all it does is when i turn it on is showingg the S2 logo and nothing else. Itried wit stock rom but i t seems like i dowes not even recgnize my volume up plug in maneuver. Need advice...
magnusaaa said:
I just bricked my device in the process of rooting and installing custom ROM. Nowe all it does is when i turn it on is showingg the S2 logo and nothing else. Itried wit stock rom but i t seems like i dowes not even recgnize my volume up plug in maneuver. Need advice...
Click to expand...
Click to collapse
Remove a battery and flash stock with sp flashtool.
1. load scatter from firmware folder
2. press download
3. plug phone without battery
You need to install drivers first I got flash and driver here (http://yadi.sk/d/J267LoVxBGQS8) and firmware http://yadi.sk/d/xonGmdhNB2Axr
after I flash partition from head post - works perfectly
I dont know where i fail but after having installed the drivers and started Flashtool nothing happens. I tried both hitting F9 and press the F9 and The regular upgrade button. Still no go. It seems idle and I have zero clue what wrong I'm doing... help appreciated...
i have a lyf flame phone it was working fine but after intalling xposedv72sdk22.zip it got into booloop(struck on bootlogo)
i have tried:
1. wipe data/factory reset
2. wipe cache partion
it is on stock recovery and rooted.tried installing zips but signature verification error.
there is no stock rom available on the net for this phone.
help me to repair it as i want to enjoy 4g sim!
You have corrupted your system files and in this situation factory resetting the device is useless as its only deletes user data, not what you changed. Also can you verify if this website is talking about your model specifically since you as you haven't specified a model for your device... Reset your Flame phone.
rehone in bootloop
sir there is no stock rom for my device
can i install one of the flame's model stock rom?will it hard brick my device?
please tell me another solution:crying::crying:.help:crying:
Could you tell me your phone's model please
ls-4001 (lyf flame 3)
i also want frimware there are no frimware of lyf flame 3 mt device is bricked i have solution but frimware is not availble help me
You will need to find someone with the same phone and backup the firmware from there
No one upload stuff for lyf flame 3
!!!!solved!!!!
nirmal cartoon said:
No one upload stuff for lyf flame 3
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B7Fr6NRtO--MYjdyWHdNVGFaeXM/view?usp=drivesdk
download firmware from here and flash it.
hit thanks if helped!
pratyaksh tyagi said:
https://drive.google.com/file/d/0B7Fr6NRtO--MYjdyWHdNVGFaeXM/view?usp=drivesdk
download firmware from here and flash it.
hit thanks if helped!
Click to expand...
Click to collapse
Thank s bro
how to flash
Please guide how to flash file...
Just download and extract it.
Open upgrade download.
Connect using USB cable holding vol down button. And click on play icon.
Flashing will start. Done
Thanks for guiding....
I am away from my PC
When I flash it will give feedback
Tnx again
No success
Downloaded and extract in PC
Open Upgrade download exe
Connected USB cable with holding down volume ( vibration mode )
Hit play icon but no flashing start...
Something did wrong but i can't get it
chandrakhatri82 said:
Downloaded and extract in PC
Open Upgrade download exe
Connected USB cable with holding down volume ( vibration mode )
Hit play icon but no flashing start...
Something did wrong but i can't get it
Click to expand...
Click to collapse
you have done something wrong.check these steps:
1. Once you open upgrade download. click on play before connecting your device.
2. remove battery for 10s~15s and then put it back again.
3. hold only vol down button and connect usb.
4 done....
here is a link to spreadtrum drivers:*(first install them)*
http://smkdrivers.blogspot.in/p/spreadtrum-spd-all-usb-drivers.html
hit thanks if helped.
you can google for driver. if this didn't helped.
or follow this video
https://www.youtube.com/watch?v=mm7zyjH-JoA
pratyaksh tyagi said:
you have done something wrong.check these steps:
1. Once you open upgrade download. click on play before connecting your device.
2. remove battery for 10s~15s and then put it back again.
3. hold only vol down button and connect usb.
4 done....
here is a link to spreadtrum drivers:*(first install them)*
http://smkdrivers.blogspot.in/p/spreadtrum-spd-all-usb-drivers.html
hit thanks if helped.
you can google for driver. if this didn't helped.
or follow this video
https://www.youtube.com/watch?v=mm7zyjH-JoA
Click to expand...
Click to collapse
Tried but software not detecting mobile
chandrakhatri82 said:
Tried but software not detecting mobile
Click to expand...
Click to collapse
i was also puzzeled in this step to flash, but at last i did with stictly following the steps.
if you followed all of them correctly then you would have flashed your device 100%.
as you said you were not able to flash you can ensure that:
1. your device is of sprdtrum chip(ls-4001) and not of MTK.
2. wipe cache/ partition and data before flash.
3. install SPRD Device drivers(!most important!)
4. retry
LINK TO DRIVERS- https://androidmtk.com/install-spreadtrum-usb-driver-manually EXTREMELY IMPORTANT STEP
revert back with sucess or failure
My Jio Phone is boot loop. So plz help me with firmware
DISCLAIMER: I WILL NOT BE HELD LIABLE FOR ANY DAMAGE TO YOUR DEVICE BY USING THIS METHOD
Warning: this will only work with the older firmware (Android 6.0.1/1BEBFDB1 )
What this will achieve:
You will flash a modified boot image that runs selinux in permissive mode.
You will flash a custom recovery that allows you to root the device.
After you are done, your userdata will most likely not be encrypted anymore. You can re-enable encryption in the system settings.
DOWNLOAD
1. Install the usb drivers that come with the device, in /system/etc/USBDriver.iso.
They are also in the download package, in USBDriver/.
Run Setup.vbs.
Also install SUGAR QCT_SP v11.1.2 Setup.exe from the download package.
2. Connect your device to your computer and boot it into EDL mode (enable usb debugging).
adb.exe reboot edl
3. Run SUGAR QCT_SP (use credentials from download package), select VF1400 device and click on the upgrade button.
It will download the latest official firmware update into "C:\Program Files (x86)\SUGAR QCT_SP_Gotu2\bin\VF1400-2AVXXXX" (VF1400-2AVDDE1, for me).
After the download is done and the flashing started, make a copy of the VF1400-2AVXXXX folder to your Desktop.
4. While the flashing is going on, we can start to modify out copy of VF1400-2AVXXXX.
In it should be a folder, most likely called 1BEBFDB1 (version number of the update).
Inside that folder should be the .mbn files we care about: B1BEB0B0CD00.mbn (boot image) and R1BEB0B0CD00.mbn (recovery image).
Possibly they will be called differently, but I assume the boot image always starts with B and the recovery with R.
You can check "C:\Program Files (x86)\SUGAR QCT_SP_Gotu2\tool\logs\Sugar_XXXXXXXX.log" to make sure which file is which.
Replace B1BEB0B0CD00.mbn with boot.img from the download and R1BEB0B0CD00.mbn with recovery.img.
5. After the flash is done and the device rebooted, put it in edl mode again (after enabling usb debugging).
adb.exe reboot edl
6. Now, *before* we start SUGAR QCT_SP again, copy the VF1400-2AVXXXX into "C:\Program Files (x86)\SUGAR QCT_SP_Gotu2\bin"
7. Start SUGAR QCT_SP, select VF1400 device and hit upgrade.
Congratulations! After flashing and after the next reboot you are running with selinux in permissive mode and you can flash SuperSU from the recovery.
Now copy the latest SuperSU flashable zip into your internal storage and install it from recovery.
The recovery used is CM-13.0, device tree based on https://github.com/zwliew/android_device_xiaomi_land
Being compiled with prebuilt kernel from boot.img.
Works great! Thank you
Cool! Thanks alot!
Hi fused#1,
thanks for this, have you tried to install Xposed on this device after rooting it?
Best regards,
misterfx
Hi,
i've now tested and installed xposed.
You need this files: xposed-v87-sdk23-arm.zip, XposedInstaller_3.1.1.apk and for safety the xposed-uninstaller-20160829-arm.zip.
Install the xposed-v87-sdk23-arm.zip with recovery, after reboot install the XposedInstaller_3.1.1.apk.
Best wishes,
misterfx
TWRP recovery
Hello.
All work as expected, thanks a lot for that.
I wonder if someone have manage to install TWRP recovery.
I mainly interesting of NANDroid Backup i can take with TWRP recovery.
How can i do that?
Thanks at advance.
Hello,
is there any way to get ntfs oder exfat support on the vodafone tab prime 7 ?
at the moment, it is original, without rom changes.
Hi, I tried your guide today, but it failed at flashing the alternative bootloader and recovery. System was not able to boot anymore after flashing the second time with your altered files.
Display only showed "powered by android" and nothing else happened. Luckily I found out that you are able to switch back into EDL mode when this happens:
- Shut down device (disconnect any cable and press power until display switches off)
- Press Vol+ AND Vol- for about 10 seconds and then insert USB cable
-> "powered by android" label flashes up and then display goes black and voila you are in EDL mode again
---------------------
Here comes my question:
Is it possible that your bootloader and/or recovery are incompatible with latest FW version? Could you have a look at the current bootloader and recovery to get selinux in permissive mode again? I attached the original bootloader and recovery that was downloaded with SUGAR QCT_SP.
Hi,
quite possible.
I wasn't even aware of the new firmware version. Obviously this only works with the old firmware. I will make that clear in the original post.
What firmware/android version is it? Maybe I'll look into that today or tomorrow.
Cheers
edit: I'm not even being offered the new firmware. Can you upload all of it somewhere?
gandharva said:
Hi, I tried your guide today, but it failed at flashing the alternative bootloader and recovery. System was not able to boot anymore after flashing the second time with your altered files.
Display only showed "powered by android" and nothing else happened. Luckily I found out that you are able to switch back into EDL mode when this happens:
- Shut down device (disconnect any cable and press power until display switches off)
- Press Vol+ AND Vol- for about 10 seconds and then insert USB cable
-> "powered by android" label flashes up and then display goes black and voila you are in EDL mode again
---------------------
Here comes my question:
Is it possible that your bootloader and/or recovery are incompatible with latest FW version? Could you have a look at the current bootloader and recovery to get selinux in permissive mode again? I attached the original bootloader and recovery that was downloaded with SUGAR QCT_SP.
Click to expand...
Click to collapse
Hi,
it seems there is again a new fw, files named like R1BEJ0J0CD00.mbn, with security patch level of April 2017. A user flashed this with the root-patch, but he has no wifi anymore.
Thanks for a update
Best wishes,
MrFX
The procedure works, but I can not install from Supersu.zip recovery mode. I tried many versions but I always get this error:
E:filed to veryfy whole-file signature
E:signature verification failed
Istallation aborted.
Can someone help me
Hey @fused#1 , i have a problem. after flashing and rooting my wifi does not work. do you know why?
x.0ldB0y.x said:
Hey @fused#1 , i have a problem. after flashing and rooting my wifi does not work. do you know why?
Click to expand...
Click to collapse
I don't think this is compatible with the latest update for the device. If you are running thatthat could be the reason. It's possible they updated the radio firmware or whatever the **** it's called these days...
Hi fused#1,
have you a hint, i've now a 2nd device with the old fw (and saved old firmware files), but sugar_qct always do a update and downloads the new firmware... is it possible to flash the old, saved files?
Update: got it, renamed all old fw files to the new names, copied they to the new created directory (replaced new fw), and sugar_qct installed the old fw with the new file names.
Thanks,
MrFX
Hey misterfx,
can u do an tutorial, how u did it to flash the old fw?
I tryed many things but he doesnt accept the old files (and i dont know the new folder-name).
Would help many guys i think, thanks ^^
Hi,
you can download the new fw with sugar_qct (but while downloading, unplug the tab)... you now have the new folder name and the files inside it.
Rename ALL old firmware files (from backup) to the new names and copy they to the new fw folder and replace all files.
Then exit sugar_qct and start it again, it will find the "new" files... make upgrade.
Good luck,
MrFX
Neeschar said:
Hey misterfx,
can u do an tutorial, how u did it to flash the old fw?
I tryed many things but he doesnt accept the old files (and i dont know the new folder-name).
Would help many guys i think, thanks ^^
Click to expand...
Click to collapse
df
thank you
TWRP
Someone can find TWRP for VFD1400?
Vdf 1400 Old firmware
Would someone please upload the vdf1400 old firmware before the update of April 2017!!
I would like to install that Rom instead..
WiFi is not working while using this method for the new firmware..
Thanks
Vdf 1400 Old firmware
Anyone has a link for the old firmware VF1400-2AVDDE1 ....
Thanks in advance
Hi Guys,
I Am Going To Guide You How To Root Your Samsung Galaxy J2 (All 2015 Variants).
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR ANY HARM OCCURRED WITH YOU DURING THE PROCESS !
GUYS, FOLLOW EACH STEP CORRECTLY FOR THE PERFECT SOLUTION.
Your Samsung Galaxy J2 May Be Have Latest Or Lowest Version Of Firmware, It Doesn't Matter.
STEP 1: UNLOCKING THE BOOTLOADER :-
Switch ON Your Phone.
Goto >>SETTINGS >>ABOUT DEVICE>>TAP THE BUILD NUMBER 3 TO 5 TIMES.
Get Back To SETTINGS And Goto >>DEVELOPER OPTIONS>>TURN "ON" OEM UNLOCK.
This Will Unlock Your BOOTLOADER.
STEP 2: DOWNLOADING THE TWRP RECOVERY (CUSTOM RECOVERY) :-
Visit TWRP Homepage.
Download The File "twrp-3.1.1-0-j2lte.img.tar"
(The Latest Version Of TWRP Recovery For Galaxy J2)
OR Just Google It, You Will Find It Easily.
STEP 3: DOWNLOADING SAMSUNG ANDROID USB DRIVERS SETUP AND ODIN TOOL :-
Visit Samsung Support Files And Download Latest Android USB Drivers For Samsung.
And Also Download Latest Version Of ODIN Tool.
(These Both Files Can Be Found Very Easily By Google)
STEP 4: FLASHING THE TWRP RECOVERY.
Make Sure You Have Installed The Latest USB Drivers For Samsung And Have Latest Version Of ODIN Tool.
Switch OFF Your Phone. (To Make Sure It Is Switched Off, Remove Battery And Re - Insert It)
Boot Your Phone Into Download Mode. (This Can Be Easily Done By Holding The "VOLUME DOWN + HOME + POWER" Buttons At A Same Time.)
Now Your Phone's Screen Shows Download Mode.
Open The "ODIN.EXE" File (After The Extracting The ODIN.ZIP).
Click On "PDA" OR "AP" Then Browse And Select The "twrp-3.1.1-0-j2lte.img.tar" File.
Now, Connect Your Phone To The PC With The USB Cable. (Make Sure That Your Cable Is Not Damaged And It is At It's Peak Performance.)
Wait Until You See The "Added" Message In The Log Section Of ODIN Tool.
Now, Click On "START" To Begin The Flashing Process.
Wait Until The Process Is Completed And Then ODIN Shows The "PASS" OR "RESET" Message.
Disconnect The Phone From The PC And Let It To Power ON Itself.
STEP 5: DOWNLOADING SUPERSU FILE AND FLASHING IT WITH TWRP RECOVERY :-
Search The File "EXPERIMENTAL-BETA-SuperSU-v2.66-20160103015024.Zip" And Download It.
Put It Into Your Internal Or External Storage.
Switch OFF Your Phone.
Boot Your Into Recover Mode. (This Can Be Easily Done By Holding The "VOLUME UP + HOME + POWER" Buttons At A Same Time.)
Now Instead Of Stock Recovery, You Will See The TWRP Recovery.
At The First Time It Will Ask For Mount System.
Swipe And Give Permissions To Mount The System.
Now, Click On "INSTALL" And Browse Your Downloaded SUPERSU.Zip And Swipe To Flash It.
Wait Till The Flash Is Completed And Then Click On "REBOOT SYSTEM".
The Phone Will Reboots Itself. (It Will Reboot For Two Times, Don't Worry ; Let It To Boot Completely And Don't Interrupt The Process.
After The Successful Boot Up, It Will Show Android Is Upgrading And Takes You To The Home Launcher ; Launch Your App Drawer To See Your SUPERSU App Installed.
STEP 6: ROOT VERIFICATION :-
Goto Play Store And Download Root Checker Basic App.
Launch It And Verify Yourself.
KEEP SMILING!!!
DOWNLOAD LINKS :-
1. Samsung Android USB Drivers :
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
2. ODIN Tool :
http://odindownload.com/mobile/
3. TWRP Recovery :
https://dl.twrp.me/j2lte/
4. SUPERSU :
https://forum.xda-developers.com/showpost.php?p=64161125
Peeran said:
Hi Guys,
I Am Going To Guide You How To Root Your Samsung Galaxy J2 (All 2015 Variants).
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR ANY HARM OCCURRED WITH YOU DURING THE PROCESS !
GUYS, FOLLOW EACH STEP CORRECTLY FOR THE PERFECT SOLUTION.
Your Samsung Galaxy J2 May Be Have Latest Or Lowest Version Of Firmware, It Doesn't Matter.
STEP 1: UNLOCKING THE BOOTLOADER :-
Switch ON Your Phone.
Goto >>SETTINGS >>ABOUT DEVICE>>TAP THE BUILD NUMBER 3 TO 5 TIMES.
Get Back To SETTINGS And Goto >>DEVELOPER OPTIONS>>TURN "ON" OEM UNLOCK.
This Will Unlock Your BOOTLOADER.
STEP 2: DOWNLOADING THE TWRP RECOVERY (CUSTOM RECOVERY) :-
Visit TWRP Homepage.
Download The File "twrp-3.1.1-0-j2lte.img.tar"
(The Latest Version Of TWRP Recovery For Galaxy J2)
OR Just Google It, You Will Find It Easily.
STEP 3: DOWNLOADING SAMSUNG ANDROID USB DRIVERS SETUP AND ODIN TOOL :-
Visit Samsung Support Files And Download Latest Android USB Drivers For Samsung.
And Also Download Latest Version Of ODIN Tool.
(These Both Files Can Be Found Very Easily By Google)
STEP 4: FLASHING THE TWRP RECOVERY.
Make Sure You Have Installed The Latest USB Drivers For Samsung And Have Latest Version Of ODIN Tool.
Switch OFF Your Phone. (To Make Sure It Is Switched Off, Remove Battery And Re - Insert It)
Boot Your Phone Into Download Mode. (This Can Be Easily Done By Holding The "VOLUME DOWN + HOME + POWER" Buttons At A Same Time.)
Now Your Phone's Screen Shows Download Mode.
Open The "ODIN.EXE" File (After The Extracting The ODIN.ZIP).
Click On "PDA" OR "AP" Then Browse And Select The "twrp-3.1.1-0-j2lte.img.tar" File.
Now, Connect Your Phone To The PC With The USB Cable. (Make Sure That Your Cable Is Not Damaged And It is At It's Peak Performance.)
Wait Until You See The "Added" Message In The Log Section Of ODIN Tool.
Now, Click On "START" To Begin The Flashing Process.
Wait Until The Process Is Completed And Then ODIN Shows The "PASS" OR "RESET" Message.
Disconnect The Phone From The PC And Let It To Power ON Itself.
STEP 5: DOWNLOADING SUPERSU FILE AND FLASHING IT WITH TWRP RECOVERY :-
Search The File "EXPERIMENTAL-BETA-SuperSU-v2.66-20160103015024.Zip" And Download It.
Put It Into Your Internal Or External Storage.
Switch OFF Your Phone.
Boot Your Into Recover Mode. (This Can Be Easily Done By Holding The "VOLUME UP + HOME + POWER" Buttons At A Same Time.)
Now Instead Of Stock Recovery, You Will See The TWRP Recovery.
At The First Time It Will Ask For Mount System.
Swipe And Give Permissions To Mount The System.
Now, Click On "INSTALL" And Browse Your Downloaded SUPERSU.Zip And Swipe To Flash It.
Wait Till The Flash Is Completed And Then Click On "REBOOT SYSTEM".
The Phone Will Reboots Itself. (It Will Reboot For Two Times, Don't Worry ; Let It To Boot Completely And Don't Interrupt The Process.
After The Successful Boot Up, It Will Show Android Is Upgrading And Takes You To The Home Launcher ; Launch Your App Drawer To See Your SUPERSU App Installed.
STEP 6: ROOT VERIFICATION :-
Goto Play Store And Download Root Checker Basic App.
Launch It And Verify Yourself.
KEEP SMILING!!!
DOWNLOAD LINKS :-
1. Samsung Android USB Drivers :
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
2. ODIN Tool :
http://odindownload.com/mobile/
3. TWRP Recovery :
https://dl.twrp.me/j2lte/
4. SUPERSU :
https://forum.xda-developers.com/showpost.php?p=64161125
Click to expand...
Click to collapse
Will this twrp works on j23g? I don't think so..
Yes,of course.
Is it working on all type of j2?
Samial said:
Is it working on all type of j2?
Click to expand...
Click to collapse
Nope
here`s the twrp for j23g
https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994
and for root Just use magisk, it works on almost all smartphones and has much more features.
problems faced and solns found
1. During twrp flashing using odin, my stock recovery kept patching the twrp after reboots. So i couldn't install twrp succesfully. To fix this I unchecked "reboot" option in odin (thanks to another xda rooting guide)and switched off device manually after flashing. Then booted into recovery by pressing "home+vol up+power". this time stock rom was gone and twrp was there to welcome me.
2. i ended up in a bootloop after flashing the aforementioned superuser zip file. Instead i flashed BETA-SuperSU-v2.74-2-20160519174328.zip and fixed the bootloop.
Note- My device is Samsung Galaxy j200-G.
Here are some links to go through(as i did) ,if you face same problems:
1. https://twrp.me/samsung/samsunggalaxyj2.html
2. https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994
3. https://www.androidinfotech.com/2016/07/root-samsung-galaxy-j2-sm-j200g-511.html
How I can unlock bootloader permanently??
SM-J200G
Will this work on SAMSUNG J200GU?
But unable to access twrp 2nd time it show custom recovery blocked by frp lock
abhi91ar said:
But unable to access twrp 2nd time it show custom recovery blocked by frp lock
Click to expand...
Click to collapse
Turn on Oem unlock in developer options.
§Ani§ said:
Turn on Oem unlock in developer options.
Click to expand...
Click to collapse
Already turned on but problem still exists. What to do now? Help me?
Ok i will try
I s there any best ROM with higher version for Samsung SM-J200H
Rooting samsung j200gu
abinashdash17 said:
1. During twrp flashing using odin, my stock recovery kept patching the twrp after reboots. So i couldn't install twrp succesfully. To fix this I unchecked "reboot" option in odin (thanks to another xda rooting guide)and switched off device manually after flashing. Then booted into recovery by pressing "home+vol up+power". this time stock rom was gone and twrp was there to welcome me.
2. i ended up in a bootloop after flashing the aforementioned superuser zip file. Instead i flashed BETA-SuperSU-v2.74-2-20160519174328.zip and fixed the bootloop.
Note- My device is Samsung Galaxy j200-G.
Here are some links to go through(as i did) ,if you face same problems:
1. https://twrp.me/samsung/samsunggalaxyj2.html
2. https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994
3. https://www.androidinfotech.com/2016/07/root-samsung-galaxy-j2-sm-j200g-511.html
Click to expand...
Click to collapse
Wow thank you so much bro I now have rooted my phone!! (Samsung J200GU):good: :laugh:
Note: I flashed SR5-SuperSU-v2.78-SR5-20161130091551 instead of the 2.74 mentioned above?
abhi91ar said:
Already turned on but problem still exists. What to do now? Help me
Click to expand...
Click to collapse
Turn off auto reboot in odin and then flash.
Does this work on Sm-J200h? Trying to root my device but I am doing a little research before I do.
Peeran said:
Hi Guys,
I Am Going To Guide You How To Root Your Samsung Galaxy J2 (All 2015 Variants).
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR ANY HARM OCCURRED WITH YOU DURING THE PROCESS !
GUYS, FOLLOW EACH STEP CORRECTLY FOR THE PERFECT SOLUTION.
Your Samsung Galaxy J2 May Be Have Latest Or Lowest Version Of Firmware, It Doesn't Matter.
STEP 1: UNLOCKING THE BOOTLOADER :-
Switch ON Your Phone.
Goto >>SETTINGS >>ABOUT DEVICE>>TAP THE BUILD NUMBER 3 TO 5 TIMES.
Get Back To SETTINGS And Goto >>DEVELOPER OPTIONS>>TURN "ON" OEM UNLOCK.
This Will Unlock Your BOOTLOADER.
STEP 2: DOWNLOADING THE TWRP RECOVERY (CUSTOM RECOVERY) :-
Visit TWRP Homepage.
Download The File "twrp-3.1.1-0-j2lte.img.tar"
(The Latest Version Of TWRP Recovery For Galaxy J2)
OR Just Google It, You Will Find It Easily.
STEP 3: DOWNLOADING SAMSUNG ANDROID USB DRIVERS SETUP AND ODIN TOOL :-
Visit Samsung Support Files And Download Latest Android USB Drivers For Samsung.
And Also Download Latest Version Of ODIN Tool.
(These Both Files Can Be Found Very Easily By Google)
STEP 4: FLASHING THE TWRP RECOVERY.
Make Sure You Have Installed The Latest USB Drivers For Samsung And Have Latest Version Of ODIN Tool.
Switch OFF Your Phone. (To Make Sure It Is Switched Off, Remove Battery And Re - Insert It)
Boot Your Phone Into Download Mode. (This Can Be Easily Done By Holding The "VOLUME DOWN + HOME + POWER" Buttons At A Same Time.)
Now Your Phone's Screen Shows Download Mode.
Open The "ODIN.EXE" File (After The Extracting The ODIN.ZIP).
Click On "PDA" OR "AP" Then Browse And Select The "twrp-3.1.1-0-j2lte.img.tar" File.
Now, Connect Your Phone To The PC With The USB Cable. (Make Sure That Your Cable Is Not Damaged And It is At It's Peak Performance.)
Wait Until You See The "Added" Message In The Log Section Of ODIN Tool.
Now, Click On "START" To Begin The Flashing Process.
Wait Until The Process Is Completed And Then ODIN Shows The "PASS" OR "RESET" Message.
Disconnect The Phone From The PC And Let It To Power ON Itself.
STEP 5: DOWNLOADING SUPERSU FILE AND FLASHING IT WITH TWRP RECOVERY :-
Search The File "EXPERIMENTAL-BETA-SuperSU-v2.66-20160103015024.Zip" And Download It.
Put It Into Your Internal Or External Storage.
Switch OFF Your Phone.
Boot Your Into Recover Mode. (This Can Be Easily Done By Holding The "VOLUME UP + HOME + POWER" Buttons At A Same Time.)
Now Instead Of Stock Recovery, You Will See The TWRP Recovery.
At The First Time It Will Ask For Mount System.
Swipe And Give Permissions To Mount The System.
Now, Click On "INSTALL" And Browse Your Downloaded SUPERSU.Zip And Swipe To Flash It.
Wait Till The Flash Is Completed And Then Click On "REBOOT SYSTEM".
The Phone Will Reboots Itself. (It Will Reboot For Two Times, Don't Worry ; Let It To Boot Completely And Don't Interrupt The Process.
After The Successful Boot Up, It Will Show Android Is Upgrading And Takes You To The Home Launcher ; Launch Your App Drawer To See Your SUPERSU App Installed.
STEP 6: ROOT VERIFICATION :-
Goto Play Store And Download Root Checker Basic App.
Launch It And Verify Yourself.
KEEP SMILING!!!
DOWNLOAD LINKS :-
1. Samsung Android USB Drivers :
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
2. ODIN Tool :
http://odindownload.com/mobile/
3. TWRP Recovery :
https://dl.twrp.me/j2lte/
4. SUPERSU :
https://forum.xda-developers.com/showpost.php?p=64161125
Click to expand...
Click to collapse
whether after I take the steps above my data will be lost ?
Phones bricked now....
you dog my phones bricked should of mentioned to make a backup u fuk wit
Nice Tutorials
Hey i m ramcharan thanks nice guide how to root samsung J200G