Database Info

[Q] Huawei Vision keeps restarting

Hi guys,I am new here
Today I flashed my vision with custom rom (2.3.7+root) from a Russian forum.Everything was OK,then I installed the Beats app and restarted.Now the phone is constantly rebooting.How can I fix it? ?Please help
PS: I try to get in recovery menu,but I cant

do you have backup? if you have
try to get recovery via adb
type ' adb reboot recovery '
and then restore

I dont have backup.I managed to get into recovery and made factory defaults, but nothing.It keeps restarting.I uploaded the rom to my sd card.And I saw "download rom from sd card" in the recovery menu.If I click it,would it flash the rom?
And another thing is that i cant remove the battery and that is why it is so hard to get into recovery
PS How it is possible to get into recovery mode when the phone is constantly restarting and I cant remove the battery?

Infoto said:
I dont have backup.I managed to get into recovery and made factory defaults, but nothing.It keeps restarting.I uploaded the rom to my sd card.And I saw "download rom from sd card" in the recovery menu.If I click it,would it flash the rom?
And another thing is that i cant remove the battery and that is why it is so hard to get into recovery
PS How it is possible to get into recovery mode when the phone is constantly restarting and I cant remove the battery?
Click to expand...
Click to collapse
use adb to get recovery, when the phone boots, quickly type 'adb reboot recovery'

Huawei U8850 keeps rebooting
Mine already brick...

Infoto said:
Hi guys,I am new here
Today I flashed my vision with custom rom (2.3.7+root) from a Russian forum.Everything was OK,then I installed the Beats app and restarted.Now the phone is constantly rebooting.How can I fix it? ?Please help
PS: I try to get in recovery menu,but I cant
Click to expand...
Click to collapse
1. Hold the Vol (+) and Power button and hold it until the screen is black. Count to 10 seconds. (Hard reset)
2. Remove a second finger from the Power button and return back to Power button (Quickly release and immediately press it back.) Huawei logo should appear just for a second and then it will turn off. Count to 10 seconds.
3. Remove your fingers and wait for the phone to turn on again, if not then good, if on then do it all over again.
4. Enter recovery mode
5. Flash it back using SUT L3.

bricked my mobile...Help!!!!
I had installed the latest rooted russian firmware and unknowingly installed the ICS..Now my device stuck at boot and while connecting with sutlr error(cannot identify device) occurs..What to do:crying:???

sivakarthick said:
I had installed the latest rooted russian firmware and unknowingly installed the ICS..Now my device stuck at boot and while connecting with sutlr error(cannot identify device) occurs..What to do:crying:???
Click to expand...
Click to collapse
I have same PROBLEM, anny help?

Stuck with Samsung Logo after installing TWRP

Hi,
I decided to root and installed a custom recovery on my G920l.
The root went fine and I installed TWRP but once I tried to reboot into the recovery my phone has frozen and doesnt want to turn off.
I don't get what I did wrong and how to fix it or at least how to turn the phone off?
Thanks

I just figured out how to restart it holding power + volume down but I guess my TWRP doesnt work...

Try to Flash stock kernal for fix stuck on boot.

The phone is booting fine but I guess the recovery still doesnt work.
And TWRP keep failing to install the custom recovery ???

massacreur75010 said:
Hi,
I decided to root and installed a custom recovery on my G920l.
The root went fine and I installed TWRP but once I tried to reboot into the recovery my phone has frozen and doesnt want to turn off.
I don't get what I did wrong and how to fix it or at least how to turn the phone off?
Thanks
Click to expand...
Click to collapse
Have you made any progress?
I'm stuck in the same situation.. I just reflashed CF Root in order to fix it. But really need TWRP working
Thanks

i got the same situration . do u know how to solve it

Hi guys, i have a g920f with 5.1.1.
Installed twrp 2.8.7.1 and i want to install a custom rom. To copy the rom on the phone, in the past on galaxy s4, i used to reboot in recovery twrp, then wipe everything and copy the rom file on the phone.
Now with twrp 2.8.7.1 and S6 when i reboot in recovery mode i'm not able to copy any file on the phone because i don't see the phone in windows explorer.
I think is twrp mtp problem, do you have the same issue? any workaround?
thanks in advance

YU Yureka with no OS stuck on a Bootloop and unable to enter recovery mode.

Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!

Hey! I'm having the same problem with my yu yureka.. Can anyone help me please!
Kaustubh M said:
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Click to expand...
Click to collapse
Hi! I'm having the same problem with this post... Does anyone knows the solution of this problem. I'd be really glad if anyone could help me with this..please!

Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.

im also having same problem i have also unknowingly wiped system & now im not able to flash any rom while flashing its rebooting automatically & i am able to enter in to fastboot mode then i have flashed factory firmware then also its not booting stucked on boot loop.

arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
Click to expand...
Click to collapse
Bro tried that but nothing........

rss3183 said:
Bro tried that but nothing........
Click to expand...
Click to collapse
Can you be more specific ? Are you facing boot loop too?

anybody please help... facing the same problem and tried the solution as mentioned above but still facing Boot loop. what to do friends. please reply

I suddenly faced bootloop.....then I tried to flash stock rom without root...as a web page suggested me that....it was flashed successfully ...but still I am facing bootloop issue .....can someone pls help me to get out of this mess....pls help me...ASAP !!!

arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
Click to expand...
Click to collapse
as its in boot loop battery has come to an end.... now what? having same problem as the topic creator

If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device

arunbiju969 said:
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
Click to expand...
Click to collapse
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a point and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.

Yogesh1969 said:
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a p loopoint and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Click to expand...
Click to collapse
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??

Sorry for a late reply...
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
The problem got solved bcos it had a battery problem !!!! Battery showed 90-100%, but could not hold up on boot.
A very strange case. Thanks.

Hi, I flashed my Yu Yureka AO5512 Yesterday and entered into recovery mode and selected the wipe userdata option. When it was doing the process after 20min the process stopped all together and My phone does not start at all now. If i press any button there is no response at all. Looks like phones OS and everything is wiped out. How do i go about from here?

Same problem , Stuck in BootLoop
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks

YuganshT7 said:
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
Click to expand...
Click to collapse
Sorry to hear that anyway,
By stock lolipop you mean you had the yureka plus with Volte From factory right!!...if so the twrp might have been for the yureka plus with the cm bootloader which got replaced in the new Devcice

I am facing the same problem and in my case I dont think its an battery issue...I was happily using the CM 13.0 Snapshot Rom since a long time...but today morning when I did a soft reset by going into the settings in my yureka...the phone has gone in bootloop...and nothing is working...using fastboot I even flashed the twrp again and also flashed the CM 12.0 Stock firmware..but nothing is working...after the YU logo it restarts....please help...

I am also facing problem maybe worst
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.

Aditi Apte said:
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Click to expand...
Click to collapse
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.

FAILED (remote: unknown command)
Yogesh1969 said:
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
Click to expand...
Click to collapse
But when I am executing other fastboot commands it halts the process between with error "FAILED (remote: unknown command)".
I have read about this error and people suggested that I need to get into "Download mode" not "fastboot/bootload". To get into "download" mode I tried pressing "VoulumeDown+Power+Home", but nothing happened, it simply restarted the phone.
Please advise.
-Aditi

nexus 5 stucked on google screen and twrp startup failure

hi, this is my first time on xda and I'm sorry if I'm doing something wrong here. I'm using nexus 5 since last 3 years and I was thinking of rooting it cause there is no official update after 6.0.1. so, I unlocked the bootloader installed twrp recovery and when I tried opening the custom recovery for the first time ever and it opened with some loading screen for 3-4 seconds then turned off and got stuck on the google screen and after 2-3 seconds it starts again. I searched everywhere but there was nothing like my problem. Now I don't know what to do cause I can't even open the custom recovery to wipe the data.
can anyone help me out in this situation?
thanks

prerit_m said:
hi, this is my first time on xda and I'm sorry if I'm doing something wrong here. I'm using nexus 5 since last 3 years and I was thinking of rooting it cause there is no official update after 6.0.1. so, I unlocked the bootloader installed twrp recovery and when I tried opening the custom recovery for the first time ever and it opened with some loading screen for 3-4 seconds then turned off and got stuck on the google screen and after 2-3 seconds it starts again. I searched everywhere but there was nothing like my problem. Now I don't know what to do cause I can't even open the custom recovery to wipe the data.
can anyone help me out in this situation?
thanks
Click to expand...
Click to collapse
Install this recovery twrp-3.0.2-0-hammerhead.img i think it will help u.
Sent from my Nexus 5 using XDA-Developers Legacy app

tathanhlam66 said:
Install this recovery twrp-3.0.2-0-hammerhead.img i think it will help u.
Click to expand...
Click to collapse
Thank you so much for your help but it took me no where. I tried cleaning the data and cache and now im stucked in animation loop. Lol

You flashed twrp using fast boot commands?
After flashing twrp, did you boot into twrp from the fast boot screen?

This is called a boot loop.
prerit_m said:
Thank you so much for your help but it took me no where. I tried cleaning the data and cache and now im stucked in animation loop. Lol
Click to expand...
Click to collapse
First off I'd like to know what did you do to unlock your bootloader? What version of TWRP did you use? Are you sure it was for the right device?
But what you're in is called a boot loop, which is the result of a error in the OS. If it's still doing this what I want you to do is wait until it is shut down then hold power + VOL Up + VOL Down and wait until it brings up the bootloader (if it does at all.) If you access that hit the VOL Down button twice to open recovery mode. If it tries to enter the TWRP custom recovery and you get that error again, I can't help ya. If it enters the stock recovery you're golden. Hit the VOL down button until you're on the wipe data/factory reset and hit the power button. This should clear out your phone. Hope this helps.

System is not booting after flashing TWRP

I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.

zahidhasanzahid said:
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
Click to expand...
Click to collapse
Have you tried booting the recovery by pressing Power + Vol up?

zahidhasanzahid said:
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
Click to expand...
Click to collapse
Now since you are bootlooping we would need to install MIUI back again, to do this download the MiFlash Tool and the fastboot ROM for the latest MIUI, now copy it's file path and paste in MiFlash Tool, also make sure it detects your phone, now in the bottom right corner there would be an option like flash_everything_except_internal (similar to this) so that the internal storage isn't erased, now flash the ROM and let the phone boot up atleast once.
Once that's done use this TWRP (https://forum.xda-developers.com/re...unofficial-twrp-3-3-1-proper-t3933531/page4), it has a fix for the encryption bug and won't lead to a bootloop (the password/code/pattern asked in it is the same as the phone's), now you have TWRP installed and running

Thanks for your support. I followed the instruction and bootup the phone. But I'm afraid of flashing TWRP ?

It worked. I installed TWRP without any issue . Thanks again ?

TWRP 3.3.1 has bug, reinstall TWRP 3.2.3 and boot to recovery and then reboot to system.

Naveenthemi said:
Now since you are bootlooping we would need to install MIUI back again, to do this download the MiFlash Tool and the fastboot ROM for the latest MIUI, now copy it's file path and paste in MiFlash Tool, also make sure it detects your phone, now in the bottom right corner there would be an option like flash_everything_except_internal (similar to this) so that the internal storage isn't erased, now flash the ROM and let the phone boot up atleast once.
Once that's done use this TWRP (https://forum.xda-developers.com/re...unofficial-twrp-3-3-1-proper-t3933531/page4), it has a fix for the encryption bug and won't lead to a bootloop (the password/code/pattern asked in it is the same as the phone's), now you have TWRP installed and running
Click to expand...
Click to collapse
I have now flashed TWRP. But my phone isn't booting into TWRP recovery and the power button and volume UP button is booting the phone into MIUI recovery. Also when booting into the system, it's asking for a password when I had no passwords on the device. Will MiFlash Tool help in this case??

mad_hat said:
I have now flashed TWRP. But my phone isn't booting into TWRP recovery and the power button and volume UP button is booting the phone into MIUI recovery. Also when booting into the system, it's asking for a password when I had no passwords on the device. Will MiFlash Tool help in this case??
Click to expand...
Click to collapse
The password is on the phone lock screen? In that case your device must have got encrypted, you might have to format all partitions and then flash with Mi Flash.Do have a try with MiFlash first, might help if it's not encrypted. Also make sure you used the right commands to flash the recovery, and use OrangeFox or Peter's.