hey today my phone switch off by it self so i recharged it and turn it on but it didnt load then i tried going on recover but it only flashes the screen black then it goes back to the same menu the recovery dont open i had CW recovery installed it says it the top
FASTBOOT MODE- NO BOOT OR RECOVERY IMG
i tried flashing cw recover by adb but it dont find the phone it the bottom of the screen it says
USB Control init
USB control init End.
anyone help?
sir ithink it is not yet bricked based on the description just make sure that all drivers for your phone is installed and flash the recovery again
hey thx for your quick respond i dont seem to find my device look at the printscreen attached.
the phone is underwarrenty can anyhouse lock the bootloader so i can sent it for repair? thx again
abdalah2004 said:
hey thx for your quick respond i dont seem to find my device look at the printscreen attached.
the phone is underwarrenty can anyhouse lock the bootloader so i can sent it for repair? thx again
Click to expand...
Click to collapse
Your adb setup isn't working. Have you booted your phone holding VOL+ and power? Are your ADB drivers installed?
It's either the first or the last one, check your stuff. I doubt it's bricked.
look thats what the phone do exactly when i restart it normal it keeps on the boot screen it just keep going on but when i boot with vol + i get into that menu not sure what its called where it say
REBOOT BOOTLOADER
REBOOT
RECOVERY
POWER OFF
not sure which driver i had but can u give me one to install just in case? thanks
PS. i just reinstalled the drivers from Android SDK still having the same problem
abdalah2004 said:
look thats what the phone do exactly when i restart it normal it keeps on the boot screen it just keep going on but when i boot with vol + i get into that menu not sure what its called where it say
REBOOT BOOTLOADER
REBOOT
RECOVERY
POWER OFF
not sure which driver i had but can u give me one to install just in case? thanks
Click to expand...
Click to collapse
I've never had good luck with the Android SDK driver, I use the PDANet driver instead.
http://junefabrics.com/android/index.php
That always got my phone to be detected after.
Edit: That's the fastboot screen. You should have used this when you rooted your phone, if you did it "manually".
You will use fastboot flash recovery recoveryimage.img
to flash a recovery. Recoveryimage.img will be the name of the recovery you're trying to flash.
i did and thats what i get when im trying flash the recovery
wow i restarted the phone and tried and it worked
abdalah2004 said:
i did and thats what i get when im trying flash the recovery
Click to expand...
Click to collapse
sir also try renaming the file so it will be easier to type...sir and it was flashed if it restarted in the recovery please let me know what happened
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Hey! I'm having the same problem with my yu yureka.. Can anyone help me please!
Kaustubh M said:
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Click to expand...
Click to collapse
Hi! I'm having the same problem with this post... Does anyone knows the solution of this problem. I'd be really glad if anyone could help me with this..please!
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
im also having same problem i have also unknowingly wiped system & now im not able to flash any rom while flashing its rebooting automatically & i am able to enter in to fastboot mode then i have flashed factory firmware then also its not booting stucked on boot loop.
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
Click to expand...
Click to collapse
Bro tried that but nothing........
rss3183 said:
Bro tried that but nothing........
Click to expand...
Click to collapse
Can you be more specific ? Are you facing boot loop too?
anybody please help... facing the same problem and tried the solution as mentioned above but still facing Boot loop. what to do friends. please reply
I suddenly faced bootloop.....then I tried to flash stock rom without root...as a web page suggested me that....it was flashed successfully ...but still I am facing bootloop issue .....can someone pls help me to get out of this mess....pls help me...ASAP !!!
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
Click to expand...
Click to collapse
as its in boot loop battery has come to an end.... now what? having same problem as the topic creator
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
arunbiju969 said:
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
Click to expand...
Click to collapse
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a point and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Yogesh1969 said:
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a p loopoint and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Click to expand...
Click to collapse
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Sorry for a late reply...
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
The problem got solved bcos it had a battery problem !!!! Battery showed 90-100%, but could not hold up on boot.
A very strange case. Thanks.
Hi, I flashed my Yu Yureka AO5512 Yesterday and entered into recovery mode and selected the wipe userdata option. When it was doing the process after 20min the process stopped all together and My phone does not start at all now. If i press any button there is no response at all. Looks like phones OS and everything is wiped out. How do i go about from here?
Same problem , Stuck in BootLoop
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
YuganshT7 said:
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
Click to expand...
Click to collapse
Sorry to hear that anyway,
By stock lolipop you mean you had the yureka plus with Volte From factory right!!...if so the twrp might have been for the yureka plus with the cm bootloader which got replaced in the new Devcice
I am facing the same problem and in my case I dont think its an battery issue...I was happily using the CM 13.0 Snapshot Rom since a long time...but today morning when I did a soft reset by going into the settings in my yureka...the phone has gone in bootloop...and nothing is working...using fastboot I even flashed the twrp again and also flashed the CM 12.0 Stock firmware..but nothing is working...after the YU logo it restarts....please help...
I am also facing problem maybe worst
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Aditi Apte said:
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Click to expand...
Click to collapse
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
FAILED (remote: unknown command)
Yogesh1969 said:
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
Click to expand...
Click to collapse
But when I am executing other fastboot commands it halts the process between with error "FAILED (remote: unknown command)".
I have read about this error and people suggested that I need to get into "Download mode" not "fastboot/bootload". To get into "download" mode I tried pressing "VoulumeDown+Power+Home", but nothing happened, it simply restarted the phone.
Please advise.
-Aditi
Hello Guys,
I have a huge Problem! I installed Twrp and CosmosOS.. after that I installed Magisk. I clicked long on the reboot button and clicked reboot recovery. It rebooted but now I am stuck in the TWRP loadingscreen and can't do anything.. I tryed to adb reboot bootloader, came back to the loadingscreen.. I also tryed to click all the combination to get somewhere but nothing worked.. Please someone help me... Im lost..
Worse case you could just flash stock images and start over. Could first try flashing twrp recovery image
ThePrinoob said:
Hello Guys,
I have a huge Problem! I installed Twrp and CosmosOS.. after that I installed Magisk. I clicked long on the reboot button and clicked reboot recovery. It rebooted but now I am stuck in the TWRP loadingscreen and can't do anything.. I tryed to adb reboot bootloader, came back to the loadingscreen.. I also tryed to click all the combination to get somewhere but nothing worked.. Please someone help me... Im lost..
Click to expand...
Click to collapse
What's your phone model (variant) ? Can you still access to the bootloader or the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
What's your phone model (variant) ? Can you still access to the bootloader or the erecovery?
Click to expand...
Click to collapse
I have a BKL-L09.
If I drain the battery to 0% I can acces CosmicOS now, but if I do a reboot it reboots back to this screen.. I can acces erecovery, but not the BL..
Is there an bootloader button? Like Power + Volume up, for recovery?
Try open cmd
Adb shell halt, after that pull USB from device.
This works for me to shut down the device.
Now connect phone with USB and hold vol -
Your phone starts in bootloader
Powered by View 10
I had the same Problem! I used the buttoncombination vol- & power - when the Phone boots, plug your USB cable that is plugged into your Computer in the Phone and you will boot into fastboot mode. Flash stock Images available via Firmware Finder, extract SYSTEM.IMG from UPDATE.APP. you will lose all data from your internal sd :/
Thanks for you're help
Hello
I tried to flash android 9 on my P20 PRO and after the reboot the phone enetered emui recovery for verification and i got the error verification fail and phone turned off.
Now if i wanna try power on the phone nothing happens. But the phone is on cuz i hook it on pc and the HIsuite starts , also on fast boot i can sent reboot command and the phone reboots but the display is black .....
Is there a way i can flash a new system via fastreboot or adb ?? Any help is appreciate..
Thanks alot
eRecovery
The recovery sitting in the "recovery" partition. eRecovery is Huawei's recovery that is able to fix your phone by downloading the latest OTA update via WiFi if you got stuck in a boot loop for several reasons.
To boot into eRecovery:
Power down your phone (if you are stuck in a boot loop simply continue with the next step).
Hold volume up until you end up in eRecovery.
Setup your WiFi access and let it recover your phone.
If unsure, "wipe data/factory reset" to get rid of any leftovers you messed up.
Reboot and be happy that you have not fully bricked your phone.
i cant enter in erecovery ....i have no image on display i tried press power+ volum up and nothing...the phone is on but is black screen .
now the led is blinking red battery empty i think
did you have an unlocked bootloader?
if thats right, you can use this guide to recover.
XDA - Recover
I recovered my phone 2 or 3 times following that guide.
aragarm said:
Hello
I tried to flash android 9 on my P20 PRO and after the reboot the phone enetered emui recovery for verification and i got the error verification fail and phone turned off.
Now if i wanna try power on the phone nothing happens. But the phone is on cuz i hook it on pc and the HIsuite starts , also on fast boot i can sent reboot command and the phone reboots but the display is black .....
Is there a way i can flash a new system via fastreboot or adb ?? Any help is appreciate..
Thanks alot
Click to expand...
Click to collapse
You could try the recovery method in my signature.
Wrote it a while back.
Hello this probably caused by bad rom installation, I've tried to get into fastboot mode by holding down volume button but it just boot looping there I've also tried wiping the data from the recovery menu but it doesnt do anything I've also tried using ADB and MI flash but both of them seems useless since I cant get into fastboot mode there's also Mi suite pc but my phone just doesnt connect with the pc. Is there anything I can do without going to service center? I'm abroad rn and my warranty will be void if I'm using outside service and I dont want to go outside without phone. Also my power up button seems to be busted
: I just select help from MIservice and boot it to bootloader using adb I manage to install twrp again but after I install rom it still wont boot into android
GanganH said:
Hello this probably caused by bad rom installation, I've tried to get into fastboot mode by holding down volume button but it just boot looping there I've also tried wiping the data from the recovery menu but it doesnt do anything I've also tried using ADB and MI flash but both of them seems useless since I cant get into fastboot mode there's also Mi suite pc but my phone just doesnt connect with the pc. Is there anything I can do without going to service center? I'm abroad rn and my warranty will be void if I'm using outside service and I dont want to go outside without phone. Also my power up button seems to be busted
: I just select help from MIservice and boot it to bootloader using adb I manage to install twrp again but after I install rom it still wont boot into android
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/4288121/post-85137963
Do clean flash. Start from step 14.
Recommend to install MIUI 12, boot into MIUI to make sure your phone works well with SIM card readable.
After phone successfully booted into MIUI, then you can flash custom ROMs.
pl1992aw said:
https://forum.xda-developers.com/t/4288121/post-85137963
Do clean flash. Start from step 14.
Recommend to install MIUI 12, boot into MIUI to make sure your phone works well with SIM card readable.
After phone successfully booted into MIUI, then you can flash custom ROMs.
Click to expand...
Click to collapse
Thank you for replying I already fix my phone but forgot to close it lol
I just flash recovery and then fastboot and it sticks
GanganH said:
Thank you for replying I already fix my phone but forgot to close it lol
I just flash recovery and then fastboot and it sticks
Click to expand...
Click to collapse
Hey, exactly same problem happened in my phone (redmi 9 prime) too. Would you please help me how can I fix this?
it happened to me just now. it was looping on that page even when I choose reboot. but then I tried the connect wi mi assistance and connected it to my PC. then I press the power button for around 10 seconds and wait. while waiting, I disconnected the USB then it showed me the same page again. BUT this time I manage to reboot it back to normal.
how did you fix it? please help me