Hello,
I have this tab for the last 2 years and it was gifted by my friend. The tab was going well until the day I tried to install CWM and it got stuck in the boot logo. I searched the net to find out some way to install the stock firmware via SDCARD and on inserting the sdcard and restarting the tab, there are some vertical colored lines on the screen and the screen was almost white but I could faintly see the boot logo.
I powered off the tab and on restarting it the screen was blank (black screen). I connected the tab to my computer and I see it was showing as unknown device in the device manager. after many search I could not find any proper driver for the tab and it won't recognise the older driver installed in my system.
I have also tried ADB driver search but the ADB tool does not recon my tab either.
Please HELP !!!!
kabira_rc said:
Hello,
I have this tab for the last 2 years and it was gifted by my friend. The tab was going well until the day I tried to install CWM and it got stuck in the boot logo. I searched the net to find out some way to install the stock firmware via SDCARD and on inserting the sdcard and restarting the tab, there are some vertical colored lines on the screen and the screen was almost white but I could faintly see the boot logo.
I powered off the tab and on restarting it the screen was blank (black screen). I connected the tab to my computer and I see it was showing as unknown device in the device manager. after many search I could not find any proper driver for the tab and it won't recognise the older driver installed in my system.
I have also tried ADB driver search but the ADB tool does not recon my tab either.
Please HELP !!!!
Click to expand...
Click to collapse
Check if SP Flash tool is detecting ur device...
ChahatGupta said:
Check if SP Flash tool is detecting ur device...
Click to expand...
Click to collapse
Thank You very much for your concern. The error is resolved by ADB Tool.
Related
Hi Guys...!
I am Muhammad Ali From Faisalabad Pakistan...! Using Huawei Ascend G510-0200 ...! Last night I've just flashed a zip in recovery mode that was including the boot.img file and then my phone got bricked...!
It only showes the splash screen which consist of A big green box, which has two small boxex inside, red and blue, phone is not detecting in recovery mode or not in the fastboot mode so that I cannot flash the stock kernel back to it...! My phone was running on CM 10.2 nightly which is Android 4.3.1...!
Device was not recognized in windows 7 completely , no plug and play options are avalable or not shown even in the device manager...!
Tried to put Fastboot.apk in the memory card and try to get it recognized in the system but failed...!
I want to get my phone working again...! Any method to change the kernel will be helpful...!
Can I tried it with Odin? Or any software like odin to work with...! Any hardware component which I can use for getting it fixed...!
Is it necessory to get it working with linux for better results...?
Any help will be appreciated...!
1 Thing I've tried later that is it is recognized as a modem device that is working correctly...! but in the firmware update mode...!
That is pink screen...!
but the fastboot and adb are not recognizing this device...!
Unbrick software also failed to get it recognized...!
No usb shown in my computer for this device...!
Cannot operate my phone so I am un happy...! isn't there any odin like software to do this...?
please help...!
sorry for uploading the pink screen image of another device becouse I do not have camera...!
The Odin just detected my Device but unable to flash successfully on it...!
Should I use the boot able sdcard for reflashing the firmware...!
boot able sdcard like you can use in the flashing of nook tablet?
Any Idea?
q
Hi,
I have same problem,did you resolve yours?
Muhammad_Ali said:
Hi Guys...!
I am Muhammad Ali From Faisalabad Pakistan...! Using Huawei Ascend G510-0200 ...! Last night I've just flashed a zip in recovery mode that was including the boot.img file and then my phone got bricked...!
It only showes the splash screen which consist of A big green box, which has two small boxex inside, red and blue, phone is not detecting in recovery mode or not in the fastboot mode so that I cannot flash the stock kernel back to it...! My phone was running on CM 10.2 nightly which is Android 4.3.1...!
Device was not recognized in windows 7 completely , no plug and play options are avalable or not shown even in the device manager...!
Tried to put Fastboot.apk in the memory card and try to get it recognized in the system but failed...!
I want to get my phone working again...! Any method to change the kernel will be helpful...!
Can I tried it with Odin? Or any software like odin to work with...! Any hardware component which I can use for getting it fixed...!
Is it necessory to get it working with linux for better results...?
Any help will be appreciated...!
Click to expand...
Click to collapse
problem
Did You fix yours phone?????
I have same problem,but havent find any solution yet....
i got the same problem any one knows how to fix it
when put on charging,the battery logo appears and then gets disappeared ....the whole screen turns off and flash turns on by itself and remains on until removed from charging .
my laptop doesn't recognize it ....i don't even know if its charged coz i think maybe the flashlight takes up everything ...hadn't put it on more than 2.5 hrs coz it gets freakin hot.
i have everything with me :its stock files like factory ,param ,zimage,recovery ,database ,etc and heimdall.
just tell me a way to get it recognized ....even i installed drivers for the tab.
can get it in download mode......
does it needs drivers of its own:fingers-crossed:
Hi, thank you for using XDA Assist. I'm not sure if you can recovery it in the state you described. But, when booted into download mode connect it to your pc. Go to device manager on the pc. Do you see an icon with a yellow exclamation mark? If so right click on it and update the driver. Go to where it lets you choose from a list on your computer. Choose the Android adb composite interface. If it works use Odin to flash the stock firmware.
Thread closed.
I guys I'm a noobie at this Stuff... But I make my Struggle, even trying it
I have a M4tel model SS1060 from Telcel, the phone was Ok, just one day it freezed , I removed the battery and when I put it back to the phone it get sttucked at M4 logo
So, I found at the web :cyclops: that with SPflashtool I could make it boot up correctly again, loading again the correct ROM or FIRMWARE with it:
I was making this procedure on a laptop with Windows 8.1pro 64bits.
1.- I get the firmware from MTK page I found
2.- I installed the mtk VCOM preloader drivers succesfully
3.- Extracted the RAR file of the Firmware.
4.- Opened Flashtool, I selected the respective scatter.txt file for my device, put the icon on "Donwload Only".
5.- I unpluged the battery, and conect it via USB, the program started to send the file . After a few secconds a error ocurred saying that the PMT was wrong. So i Try it again a few times, even with other version of SPflashtool, and different firmwares for the M4 ss1060 (diferent mobile operators ROMs) without good results.
At this point the phone was in the same condition... I could boot it into recovery normaly, but when triyng to boot it up it keeps stucked at M4's Logo.
I found that this issue was supposed to be fixed setting the program on "Firmware Upgrade" instead of "Download Only". So I make the same process changing it to Firmware Upgrade.....
7.- The progam started succesfully, and loaded the file completly with no errors, after eight minutes the "ok " icon" was shown :fingers-crossed: .
I unplugged the phone from the PC, insert the battery and nothing happened ANYTHING. I think that my mistake was to put "Firmware Upgrade".....
The phone keeps OFF I plug the Charger and it does not turns even the screen to Say "I'm Charging" :crying: I can't even get it into recovery mode, no logo screens. BUT.... When I plug the USB from the PC to the Phone I see that the Device Manager detects the phone with the Vcom Preloader of Mediatek.
So I tried to load the firmware again with SPflashtool on Download mode, the program send the file correctly, and it takes long as ten minutes showing the "OK" icon. But the phone keeps OFF, it makes nothing....
So I wonder If someone knows what to do, I was thinking on install a custom recovery, having on that the problem may be that I damaged the recovery of my phone making it unaviable to boot up. But I'm not shure, and I haven't found information about it.
I just knows that my phone has a MT6572 Chipset, I wonder if some one knows what to do.
Thanks.
bullracing said:
I guys I'm a noobie at this Stuff... But I make my Struggle, even trying it
I have a M4tel model SS1060 from Telcel, the phone was Ok, just one day it freezed , I removed the battery and when I put it back to the phone it get sttucked at M4 logo
So, I found at the web :cyclops: that with SPflashtool I could make it boot up correctly again, loading again the correct ROM or FIRMWARE with it:
I was making this procedure on a laptop with Windows 8.1pro 64bits.
1.- I get the firmware from MTK page I found
2.- I installed the mtk VCOM preloader drivers succesfully
3.- Extracted the RAR file of the Firmware.
4.- Opened Flashtool, I selected the respective scatter.txt file for my device, put the icon on "Donwload Only".
5.- I unpluged the battery, and conect it via USB, the program started to send the file . After a few secconds a error ocurred saying that the PMT was wrong. So i Try it again a few times, even with other version of SPflashtool, and different firmwares for the M4 ss1060 (diferent mobile operators ROMs) without good results.
At this point the phone was in the same condition... I could boot it into recovery normaly, but when triyng to boot it up it keeps stucked at M4's Logo.
I found that this issue was supposed to be fixed setting the program on "Firmware Upgrade" instead of "Download Only". So I make the same process changing it to Firmware Upgrade.....
7.- The progam started succesfully, and loaded the file completly with no errors, after eight minutes the "ok " icon" was shown :fingers-crossed: .
I unplugged the phone from the PC, insert the battery and nothing happened ANYTHING. I think that my mistake was to put "Firmware Upgrade".....
The phone keeps OFF I plug the Charger and it does not turns even the screen to Say "I'm Charging" :crying: I can't even get it into recovery mode, no logo screens. BUT.... When I plug the USB from the PC to the Phone I see that the Device Manager detects the phone with the Vcom Preloader of Mediatek.
So I tried to load the firmware again with SPflashtool on Download mode, the program send the file correctly, and it takes long as ten minutes showing the "OK" icon. But the phone keeps OFF, it makes nothing....
So I wonder If someone knows what to do, I was thinking on install a custom recovery, having on that the problem may be that I damaged the recovery of my phone making it unaviable to boot up. But I'm not shure, and I haven't found information about it.
I just knows that my phone has a MT6572 Chipset, I wonder if some one knows what to do.
Thanks.
Click to expand...
Click to collapse
Greetings,
Thanks for using XDA Assist. Please ask your question here:
Android Q&A
You'll receive expert advice there. Good luck!
I have a karbonn sparkle v(android one) playstore and gmail was not working so I factory reset it. After first boot I got a welcome screen,then sim card setup.After that it shows available wifi which I choose one it shows connected and comes checking connection screen. I almost waited 4-5 hours it still shows checking connection. I have cleared cache partition and data again but no luck. It always get stuck. Pls help....
Softwarelord said:
Bro Read Carefully....
1.Flash Your Karbonn Sparkle v How To Flash Click Here
2. Download Stock Rom click here
please Read How To Flash Carefully...
You Will Get All Solution On This Link.. Read Step By Step...
Click to expand...
Click to collapse
thanks for reply bro...
but I am facing problem in flashing also
installed all mediatek drivers, signature disabled, added legacy software etc still my device is not detected by sp flash tools.
tried different Usb cables, 2 windows 10 system , no detection at all.
is their any alternative?
Softwarelord said:
install mtk vcom driver And click sp flash tool upgrade option
now remove battery and usb cable from cellphone....
now insert battery then cable... you will see detection on sp flash tool
Click to expand...
Click to collapse
This time a popup message appears
The last USB device connected to this computer malfunctioned, and Windows does not recognize it.
images of drivers and pop up messages attached.
but when I changed usb cable their is no pop up and no detection.
Softwarelord said:
Flash in Windows 7 Or Change Usb Cable...
Click to expand...
Click to collapse
Changed usb cable and tried in windows 7, no luck
It always show MTP USB device in device manager as soon as I connect my phone and inserts battery, without battery just nothing.
My karbonn sparkle v android one is running on android 6 marshmallow, few days ago i did a Factory reset on my phone, while the phone was rebooting after wiping all the data , It asked to setup sim card and WiFi after i entered the WiFi password it connected properly and the screen showed "Checking connection.. This might take a while.." .. so i waited but it is remaining is that screen, there is no option to skip that setting.... I have tried rebooting from recovery.. wiping cache partition but again it is struck on that screen.... ............... when i googled about this i saw same problem has happened to some Nexus devices also .. but they are not mentioning any solutions for this.. so If anyone has any idea please help.My karbonn sparkle v android one is running on android 6 marshmallow, few days ago i did a Factory reset on my phone, while the phone was rebooting after wiping all the data , It asked to setup sim card and WiFi after i entered the WiFi password it connected properly and the screen showed "Checking connection.. This might take a while.." .. so i waited but it is remaining is that screen, there is no option to skip that setting.... I have tried rebooting from recovery.. wiping cache partition but again it is struck on that screen.... ............... when i googled about this i saw same problem has happened to some Nexus devices also .. but they are not mentioning any solutions for this.. so If anyone has any idea please help.
I find solution through android one toolkit that unlocked my bootloader and i was able to install twrp also.
Then simply flashed cm 13 and now its working fine.
At first,i want to clear my issue.
I have karbonn sparkle v (NOT ROOTED).this phone got september update and stuck at android is starting,optimizing applications and google logon screen.
Then i decided to factory reset the phone with recovery boot but didnt works.
i thought that may be recovered from installing old update i.e.august or previous..i searched and downloaded the update file and update from sd card as mentioned in some of the XDA posts...didnot work.
at final,i decided to stock recovery using SP flash tool.got stock rom and driver installed as mentioned in XDA post and other videos as well.MTK VCOM driver as well as mobile drivers installed and stock ROM downlaoded..But when i open latest SP flash tool and try to connect to phone.it did not.. it tried all possible ways to connect like removing battery ,or removing and inserting with volume button pressed or other...while connecting without battery ,nothing happens in PC driver list,no sound nothing.Sp flash tool doesnot recognise chip and downloading /flashing could not happened...
i had flashed some phones using same method and while connecting with pressing volume key ,flashing started.
But i this case ,what happened i dont know,device is not connected but charges and same stuck at boot screen and device manager shows SPARKLE V in portable device list.
I hope some help make my phone .
ranjand said:
At first,i want to clear my issue.
I have karbonn sparkle v (NOT ROOTED).this phone got september update and stuck at android is starting,optimizing applications and google logon screen.
Then i decided to factory reset the phone with recovery boot but didnt works.
i thought that may be recovered from installing old update i.e.august or previous..i searched and downloaded the update file and update from sd card as mentioned in some of the XDA posts...didnot work.
at final,i decided to stock recovery using SP flash tool.got stock rom and driver installed as mentioned in XDA post and other videos as well.MTK VCOM driver as well as mobile drivers installed and stock ROM downlaoded..But when i open latest SP flash tool and try to connect to phone.it did not.. it tried all possible ways to connect like removing battery ,or removing and inserting with volume button pressed or other...while connecting without battery ,nothing happens in PC driver list,no sound nothing.Sp flash tool doesnot recognise chip and downloading /flashing could not happened...
i had flashed some phones using same method and while connecting with pressing volume key ,flashing started.
But i this case ,what happened i dont know,device is not connected but charges and same stuck at boot screen and device manager shows SPARKLE V in portable device list.
I hope some help make my phone .
Click to expand...
Click to collapse
Greetings and welcome to assist. It looks like this may be an issue with finding the correct drivers for your phone. I found this post which may help you
https://forum.xda-developers.com/showpost.php?p=68372526&postcount=4
Good Luck
Sawdoctor