please help usb not recognized in download mode - Galaxy S6 Q&A, Help & Troubleshooting

Hi
My phone's rom is gone and i tried to flash a new rom via odin but it says usb not recognized
Also it set to usb unknown in device manager and error code is 43
I tested another galaxy s6 and it's OK in odin but mine not work

prance666 said:
Hi
My phone's rom is gone and i tried to flash a new rom via odin but it says usb not recognized
Also it set to usb unknown in device manager and error vode is 43
I tested another galaxy s6 and it's OK in odin but mine not work
Click to expand...
Click to collapse
What version of Odin do you try?
And try another port + cable.

odin 3.10.7& 3.09.3

I am having this same problem with my S6 920i today, it is giving code 43 device descriptor request failed in fastboot(odin), recovery and when booted up.
Also it draining battery very quick and getting very hot. I think it's software but I can't solve that while the USB is not working like this.
I used the USB yesterday to transfer files.

try dialing *#0808# and set usb for different modes there and see if that helps.

brenner650 said:
try dialing *#0808# and set usb for different modes there and see if that helps.
Click to expand...
Click to collapse
Tried it just now, either does detect at all or gives the same issue no matter the mode I pick. Ugh. thanks for the suggestion though.
---------- Post added at 11:02 AM ---------- Previous post was at 10:50 AM ----------
Liquid5n0w said:
I am having this same problem with my S6 920i today, it is giving code 43 device descriptor request failed in fastboot(odin), recovery and when booted up.
Also it draining battery very quick and getting very hot. I think it's software but I can't solve that while the USB is not working like this.
I used the USB yesterday to transfer files.
Click to expand...
Click to collapse
The getting hot/battery drain was from the Oculus update that was constantly trying to install another update and failing, it affected everyone with a GearVR that had been used on phones at any point.
My guess is that the extreme heat damaged my USB controller chip. The phone already has the sensor chip not working which disables everything from GPS to rotation to the heartbeat sensor and even the proximity sensor. Life has sucked for me with this phone.

Related

Galaxy S3 on 4.3 with Samsung Custom

I have rooted many phones but DO NOT consider myself an expert in any way but after countless hours on the search, I am just STUCK And seriously frustrated. Here is my complicated story.
I was rooted but without a custom ROM. In the progress upgraded to 4.3 OTA. Since then my phone has been on the decline...the WI-FI does not turn on, the GPS is erratic, and now I cannot connect via USB to anything.
I have done everything imaginable and suggested to my PC (WIN8) as well as the phone. I cannot connect via ODIN nor KIES as I cannot get the USB to work.
In ODIN Mode I have:
PRODUCT NAME: SCH-I535
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: Enable
WARRANTY BIT: 1
BOOTLOADER RP SWREV: 1
I would prefer to downgrade although I have read this is not an option at this point.
to have functional Wi-Fi and USB connectivity would be great to have again.
Please help!!!
Is my phone considered to be SOFT-Bricked?
Try a new cable and/or a different USB port.
Also kies3 is required. The old kies will not connect to any 4.3 or higher android device. Make sure you have the latest drivers as well
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
Also make sure you have USB debugging on. Go to settings and about phone. Tap on the version several timea and it will bring out the developer options.
Sent from my SCH-I535 using xda app-developers app
Go on kies make sure your phone in UNplugged then click connection trouble shoot. Same thing was happening to me on windows 8 so I temporarily went back to 7. It looks like the drivers get messed up if you go from lets say the download mode drivers to the normal drivers. It seemed like every time before I connected my phone I had to do that.
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
Kies 3 does not have the drivers for this phone
ThePagel said:
Go on kies make sure your phone in UNplugged then click connection trouble shoot. Same thing was happening to me on windows 8 so I temporarily went back to 7. It looks like the drivers get messed up if you go from lets say the download mode drivers to the normal drivers. It seemed like every time before I connected my phone I had to do that.
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
Kies 3 does not have the drivers for this phone
Click to expand...
Click to collapse
Thanks for the reply and suggestions.
I have tried three different cables, installed Kies 3, two different computer and multiple ports on both systems with all the phone settings as suggested. I now get the following message when connected to the USB cable: USB Device not recognized. Device malfunctioned and Windows (8) does not recognize it. I have removed all software, reinstalled phone drivers.
Sooo frustrating!
ivndrago said:
Thanks for the reply and suggestions.
I have tried three different cables, installed Kies 3, two different computer and multiple ports on both systems with all the phone settings as suggested. I now get the following message when connected to the USB cable: USB Device not recognized. Device malfunctioned and Windows (8) does not recognize it. I have removed all software, reinstalled phone drivers.
Sooo frustrating!
Click to expand...
Click to collapse
Why do you want to connect to kies? It has 4.1.2 it will always fail the flash for us 4.3 people. Use the Verizon updater or odin. Just a fyi kies will never say it recognizes the phone in downloadmode.
ThePagel said:
Why do you want to connect to kies? It has 4.1.2 it will always fail the flash for us 4.3 people. Use the Verizon updater or odin. Just a fyi kies will never say it recognizes the phone in downloadmode.
Click to expand...
Click to collapse
My problem is I cannot get the computer to recognize the phone. I have tried using the code to get into Qualcomm PhoneUtils but I guess I am not sure if that applies to my model phone. This would allow me to confirm the USB settings (MTB?) of the phone.
At this point, any connection would be a HUGE step forward.
Thanks for your help.
ivndrago said:
My problem is I cannot get the computer to recognize the phone. I have tried using the code to get into Qualcomm PhoneUtils but I guess I am not sure if that applies to my model phone. This would allow me to confirm the USB settings (MTB?) of the phone.
At this point, any connection would be a HUGE step forward.
Thanks for your help.
Click to expand...
Click to collapse
You can boot up the phone to a useable state correct?
ThePagel said:
You can boot up the phone to a useable state correct?
Click to expand...
Click to collapse
Yes, the phone is operational; that is to say it makes and receives calls. The Wi-Fi does not turn on and the GPS is very erratic. I have not found any other problems yet, but I am sure that they must be others....
ivndrago said:
Yes, the phone is operational; that is to say it makes and receives calls. The Wi-Fi does not turn on and the GPS is very erratic. I have not found any other problems yet, but I am sure that they must be others....
Click to expand...
Click to collapse
That sucks at least you can make calls. Hope you figure it out. Maybe it has something to do with your warranty bit.
---------- Post added at 01:11 PM ---------- Previous post was at 01:01 PM ----------
Just one more thought. I know you said you tried everything but did you try a factory reset then on first login when Google asks to import saved data like WiFi settings uncheck the box?
Galaxy S3 on 4.3 with Samsung Custom ** FIXED **
This appears to be the fix to my problems.
http://forum.xda-developers.com/showthread.php?t=2586319
Thanks a ton to ThePagel

[Q] Device isn't recognized by the Computer.

Hello everyone!
So, the problem is, when i connect my Nexus 5 into the Computer (via USB cable) the computer doesn't seem to recognize the device...
by "doesn't recognize" I mean not even in Device Manager, The only thing it does is charging up the device.
I tried many things such as:
*Factory Resetting my Device
*Different Computers (one of them is brand new laptop running windows 8.1, another one is normal running windows 7)
*tried to install driver solutions from a Nexus Toolkit
*swapping USB cables / ports on the PC
*Selecting MTP / PTP and plugging / unplugging between
Info:
I'm on a brand new laptop running Windows OS 8.1
My device is rooted and running a flashed zip of Lolipop 5.0
I'm using TWRP Recovery.
I tried looking for a solution in the web including this forum but I can't seem to figure it out.
If by any chance you know the solution to this problem please inform me of it, Thanks alot!
​
chuckapilhard said:
Hello everyone!
So, the problem is, when i connect my Nexus 5 into the Computer (via USB cable) the computer doesn't seem to recognize the device...
by "doesn't recognize" I mean not even in Device Manager, The only thing it does is charging up the device.
I tried many things such as:
*Factory Resetting my Device
*Different Computers (one of them is brand new laptop running windows 8.1, another one is normal running windows 7)
*tried to install driver solutions from a Nexus Toolkit
*swapping USB cables / ports on the PC
Info:
I'm on a brand new laptop running Windows OS 8.1
My device is rooted and running a flashed zip of Lolipop 5.0
I'm using TWRP Recovery.
I tried looking for a solution in the web including this forum but I can't seem to figure it out.
If by any chance you know the solution to this problem please inform me of it, Thanks alot!
​
Click to expand...
Click to collapse
Try going to "settings"
"storage"
Menu. Click the 3 buttons top right under the time (this is the menu button)
"Choose USB computer connection"
Change from MTP to PTP and see if the device shows up in device manager. Then change it back to MTP and see if it showed up in device manager. If it does on either uninstall what ever driver is installed and reboot computer. Then connect device to PC and see if computer recognizes your phone, if it does let it finish installing and browse to device manager and install the USB drivers put out by google here http://developer.android.com/sdk/win-usb.html or alternatively use the naked drivers here http://www.xda-developers.com/andro...r-solves-your-adb-driver-problems-on-windows/
I found that simply plugging and unplugging usb while looking at device manager you can find out what usb it is.
Finally if you could not find out anything above, I had an issue where my usb connection was full of lint from my pocket. The cable was not seating properly inside the phone from the lint obstruction. I could not get the USB drivers or my phone to charge properly. It kept disconnecting and I eventually cleaned the phone with a q-tip and a toothpick, sometime the phone connector could bend so you could try to bend it back, mine has been good every since. I'm not saying shove something in it and bend it/break it. I'm simply saying to lightly clean it or pry it up so that it makes a better connection and make sure that your USB is properly seated.
Jnewell05 said:
Try going to "settings"
"storage"
Menu. Click the 3 buttons top right under the time (this is the menu button)
"Choose USB computer connection"
Change from MTP to PTP and see if the device shows up in device manager. Then change it back to MTP and see if it showed up in device manager. If it does on either uninstall what ever driver is installed and reboot computer. Then connect device to PC and see if computer recognizes your phone, if it does let it finish installing and browse to device manager and install the USB drivers put out by google here http://developer.android.com/sdk/win-usb.html or alternatively use the naked drivers here http://www.xda-developers.com/andro...r-solves-your-adb-driver-problems-on-windows/
I found that simply plugging and unplugging usb while looking at device manager you can find out what usb it is.
Finally if you could not find out anything above, I had an issue where my usb connection was full of lint from my pocket. The cable was not seating properly inside the phone from the lint obstruction. I could not get the USB drivers or my phone to charge properly. It kept disconnecting and I eventually cleaned the phone with a q-tip and a toothpick, sometime the phone connector could bend so you could try to bend it back, mine has been good every since. I'm not saying shove something in it and bend it/break it. I'm simply saying to lightly clean it or pry it up so that it makes a better connection and make sure that your USB is properly seated.
Click to expand...
Click to collapse
well i tried what you just said, it didn't work sadly but I just tried to connect it to my cousin PC and it worked properly
so I guess its something about the computer... Do you know any possible solution? thanks for trying anyway
I had a LG phone driver before that didn't allow my NEXUS 5 to be recognized once before, I think i solved it by connecting my old phone to the PC and uninstalled drivers via device manager. Other than that dude I'd just have to tinker until I figured it out.
---------- Post added at 05:16 PM ---------- Previous post was at 05:12 PM ----------
http://developer.android.com/tools/extras/oem-usb.html#InstallingDriver
---------- Post added at 05:18 PM ---------- Previous post was at 05:16 PM ----------
Just googled "troubleshooting nexus 5 drivers" shows some interesting articles. Worth a shot?
Jnewell05 said:
I had a LG phone driver before that didn't allow my NEXUS 5 to be recognized once before, I think i solved it by connecting my old phone to the PC and uninstalled drivers via device manager. Other than that dude I'd just have to tinker until I figured it out.
---------- Post added at 05:16 PM ---------- Previous post was at 05:12 PM ----------
---------- Post added at 05:18 PM ---------- Previous post was at 05:16 PM ----------
Just googled "troubleshooting nexus 5 drivers" shows some interesting articles. Worth a shot?
Click to expand...
Click to collapse
well, we are talking on a brand new pc... so i dont have any drivers installed yet..
the problem is not installing drivers, its getting the pc to recognize the device as a device... right now it only send power to charge the device...
chuckapilhard said:
well, we are talking on a brand new pc... so i dont have any drivers installed yet..
the problem is not installing drivers, its getting the pc to recognize the device as a device... right now it only send power to charge the device...
Click to expand...
Click to collapse
Try plugging the phone into a usb 2 0 port if your comp has one. Some people have had issues using a 3.0 port.
theesotericone said:
Try plugging the phone into a usb 2 0 port if your comp has one. Some people have had issues using a 3.0 port.
Click to expand...
Click to collapse
tried every usb port on the pc and it didnt work thanks for the suggestion though. anyone else?
chuckapilhard said:
well, we are talking on a brand new pc... so i dont have any drivers installed yet..
the problem is not installing drivers, its getting the pc to recognize the device as a device... right now it only send power to charge the device...
Click to expand...
Click to collapse
chuckapilhard said:
tried every usb port on the pc and it didnt work thanks for the suggestion though. anyone else?
Click to expand...
Click to collapse
Sorry man I should have read the op a little better. Try this:
http://www.androidpit.com/nexus-5-problem-connecting-to-pc
theesotericone said:
Sorry man I should have read the op a little better. Try this:
[]
Click to expand...
Click to collapse
'
hmm this article still says that i need to update drivers throug'h device manager...
I'll say it again, I cannot see my device in device manager nor anything related to him such asndroid composit adb etc...
i tried refreshing and connecting / disconnecting the phone while staring at device manager to catch the phone connection but nothing appeard /. disappeard
I'm in a real issue here, and i tried many things to solve it but nothing seems to fix it...
thanks for help so far any other ideas?
Turn off USB Debugging (if you haven't already, assuming it's on) and see if it works. Probably not, but it does happen to some people
EddyOS said:
Turn off USB Debugging (if you haven't already, assuming it's on) and see if it works. Probably not, but it does happen to some people
Click to expand...
Click to collapse
i cannot count how many times ive tried that :/ but thanks for the suggestion
I tried to do something with the windows recovery and it installedf some drivers successfully but still device won't show up in Device Manager...
I'm seriously stuck guys a help would be mucvh appreciated really!
chuckapilhard said:
i cannot count how many times ive tried that :/ but thanks for the suggestion
I tried to do something with the windows recovery and it installedf some drivers successfully but still device won't show up in Device Manager...
I'm seriously stuck guys a help would be mucvh appreciated really!
Click to expand...
Click to collapse
It seems like you've tried all the steps i know of. Have you tried plugging another device into the comp to make sure it's not hardware issue on the comps side? You could also live boot an Ubuntu CD and see if it's recognized with a different os.
the problem is due to win usb generic drivers that doesn't work
http://forum.xda-developers.com/google-nexus-5/help/problem-pc-t2858740/post55059501#post55059501
follow these instructions then install google usb drivers http://developer.android.com/sdk/win-usb.html
theesotericone said:
It seems like you've tried all the steps i know of. Have you tried plugging another device into the comp to make sure it's not hardware issue on the comps side? You could also live boot an Ubuntu CD and see if it's recognized with a different os.
Click to expand...
Click to collapse
i tried connecting an lgg3 and it didnt work eigher, earlier today i went to the store where i bought the pc and they couldnt figure it out....
im srsly out of ideas..
chuckapilhard said:
i tried connecting an lgg3 and it didnt work eigher, earlier today i went to the store where i bought the pc and they couldnt figure it out....
im srsly out of ideas..
Click to expand...
Click to collapse
Could be the serial bus controller in the comp is bad. If you have a USB stick laying around plug that in and see if the comp detects that. If it doesn't see any external devices its a defective component in the comp.
theesotericone said:
Could be the serial bus controller in the comp is bad. If you have a USB stick laying around plug that in and see if the comp detects that. If it doesn't see any external devices its a defective component in the comp.
Click to expand...
Click to collapse
tried 2 sifferent USB sticks 1- 8GB (worked) one 64 GB (worked) and i tried an external hard drive 500GB (worked)
Its something to do with mobile phones only (atleast from the things i tried)
Is your computer an Acer?
---------- Post added at 08:38 PM ---------- Previous post was at 08:29 PM ----------
You seem quick to dismiss an issue with your computer. I honestly believe it is the computer drivers. Even brand new there are pre installed drivers on your PC that could interfere with the Nexus 5. Its possible that its registered in the PC device manager as something other then nexus or under something other then USB or portable devices. I've seen this so many times. Its also possible that the phone or USB are malfunctioning but I don't think you've exhausted all options software wise yet.
my computer is a Lenovo brand, I tried everything i know, if you have any suggestions I will appreciate it alot thanks for helping me so far.
chuckapilhard said:
my computer is a Lenovo brand, I tried everything i know, if you have any suggestions I will appreciate it alot thanks for helping me so far.
Click to expand...
Click to collapse
If you have USB 2 and 3 ports, try using USB 2. Short of that, its cables...
Well I tried USB 2.0 ports too it might be the cables although I tried 3 different ones but I'll try to get the one it worked with on another PC...
Sent from my Nexus 5 using XDA Free mobile app

USB connecting problem.

Hello guys!
I have been using my 1+1 since september. Everything was allright! I have changed rom and kernel many times, so it means that i have got my ADB installed and know something about tweaking a phone. I say that, becouse last time i asked for a help, i heard only simple solutions. I already tried them all.
So, my problem is:
When i connect my phone to PC 1+1 start to charge, but PC can`t see him. I have tryed it on 4 different pc (all windows 8 or 8,1 (64)) and 2 different cables (native and my old one). All PC can`t even find 1+1 in device manager. Ofcourse i have confirmed USB-debugging, MTP etc. This problem suddenly appeared without a reason.
So i used native reset function and now my phone got no Root and Recovery. I don`t know what to do. Any ideas?
Any help. guys?
Still need help
Did you update your SDK?
If you're using the original USB cable that came with the phone try swapping it with a non-OPO cable.
TheManDroid said:
If you're using the original USB cable that came with the phone try swapping it with a non-OPO cable.
Click to expand...
Click to collapse
test with another PC?
Two other OPO users had similar issues and it turned out to be the original cable. That is why I'm suggesting a different cable.
I have used another cable and 3 different PC. Still cant find my phone!
updated SDK but it didnt help
Weird. Try uninstall all driver. Then re-install back OPO driver. I think that is not cable issue since you have tried different pc and cable. Hmmm really weird.
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
@xanthrax need your help on this. Really weird problem. What do you think?
Just need your experience
i`m a bit confuse here
on the first post he says " after reset , no root no recovery"
what`s the status now ?
try pdanet app, it comes with universal adb drivers
i already installed reinstalled uninstalled drivers. i hae tryed all manipulations with drivers
etm my phone has no recovery or root, beacouse i did factory reset (thought it might help). so i cant install another rom (beacouse cant use abd fastboot or recovery)
any other ideas??
maybe its problem with phone usb port
Did you try like what xanthrax said? Try it first then let us know it help or not.
Weird. Charge can detected but not showed up on your pc. Hmm
rafiuddinrozman said:
Did you try
Click to expand...
Click to collapse
i have tryed to install that app to pc and opo. useless. still cant find drivers. seems like the problem is in my phones usb port ((
Use your warranty bro. Goodluck mate !
It happens when one of the pins for data gets f****d up so most probably nothing to do... USB hub replacement
Unrecognized by 4 different pc's and cables doesn't sound good at all
Sent from my Darkside of 1+1

Usb not recognised when connecting to computer

Please help me out somebody. Whenever I connect my mate 7 with pc, it shows usb not recognised. Some info :
1. All drivers are fine . Nothing wrong in pc
2. Tried usb debugging on off but no effect.
3. Factory reset the phone. No effect. Currently I am on 4.4..4 firmware with cwm recovery installed.
4. I also got replaced its charging dock port but then also it is no working.
5. Changed usb cable too . no effect.
6. Actually I want to update my phone to 5.0 or 6.0 but for I should be on stock recovery which can only be flashed in fastboot mode . But as usb is not working cant flash it in fastboot mode.
So please tell me is there any way to flash stock recovery without using usb cable ?
Or any otherway I can update my phone to lollipop or marshmallow over kitkat without stock recovery and data cable ?
first phone model?
Sent from my HUAWEI MT7-TL10 using Tapatalk
---------- Post added at 07:01 PM ---------- Previous post was at 07:00 PM ----------
and your computer system operating sytem?in win8or 10 you make unknown device recognize
Sent from my HUAWEI MT7-TL10 using Tapatalk
demirozu69 said:
first phone model?
Sent from my HUAWEI MT7-TL10 using Tapatalk
---------- Post added at 07:01 PM ---------- Previous post was at 07:00 PM ----------
and your computer system operating sytem?in win8or 10 you make unknown device recognize
Sent from my HUAWEI MT7-TL10 using Tapatalk
Click to expand...
Click to collapse
Phone model is - MT7-TL10 international version.
And I have tried it in all os - windows xp, 7, 8 , 10 but in all it shows usb not recognised .
try this in win 8 or win 10:
http://forum.xda-developers.com/galaxy-nexus/general/tutorial-installing-adb-fastboot-t1982718
demirozu69 said:
try this in win 8 or win 10:
http://forum.xda-developers.com/galaxy-nexus/general/tutorial-installing-adb-fastboot-t1982718
Click to expand...
Click to collapse
I already know this thing. but the point is computer is showing usb not recognised not the driver issue. In device manager following message comes in front of my device .
"unknown usb device descriptor failed"
sachinwadhwa46 said:
Please help me out somebody. Whenever I connect my mate 7 with pc, it shows usb not recognised. Some info :
1. All drivers are fine . Nothing wrong in pc
2. Tried usb debugging on off but no effect.
3. Factory reset the phone. No effect. Currently I am on 4.4..4 firmware with cwm recovery installed.
4. I also got replaced its charging dock port but then also it is no working.
5. Changed usb cable too . no effect.
6. Actually I want to update my phone to 5.0 or 6.0 but for I should be on stock recovery which can only be flashed in fastboot mode . But as usb is not working cant flash it in fastboot mode.
So please tell me is there any way to flash stock recovery without using usb cable ?
Or any otherway I can update my phone to lollipop or marshmallow over kitkat without stock recovery and data cable ?
Click to expand...
Click to collapse
i am living same problem ... did you find any way to fix it?
cxc said:
i am living same problem ... did you find any way to fix it?
Click to expand...
Click to collapse
Did your phone charge at very slow rate with official data cable ?
Have you got your battery got replaced since you have buyed the phone ?
sachinwadhwa46 said:
Did your phone charge at very slow rate with official data cable ?
Have you got your battery got replaced since you have buyed the phone ?
Click to expand...
Click to collapse
it taking ~6 hour to charge, i didnt change battery. actually i used cheap charger while couple day then it didnt work when plug the computer. phone still have about 1 year warranty but i am not sure is it my fault or producer.
cxc said:
it taking ~6 hour to charge, i didnt change battery. actually i used cheap charger while couple day then it didnt work when plug the computer. phone still have about 1 year warranty but i am not sure is it my fault or producer.
Click to expand...
Click to collapse
The next big thing happened to me is one day it got off suddenly and after that it nvr got on. On charging only the red battery logo comes with red led blinking and nothing happens even if i leave it charging for whole day.
Then i by passed battery and then connected cable then boot animation comes for a second.
So i doubt it might be faulty battery in our case or a typical hardware issue.
Actually this phone was not released in my country so i have ordered battery and it is arriving within 2 days. And you have btter chance to get the phone rectified by huawei. Also ask them what was the fault , it might help me if battery did not works.

PC doesn't recognize my Note 5 N920P

I'm having this issue with a Note 5 from Sprint, it charges well and OTG functions as well, but my pc only recognizes on Odin when it's on download mode, help please. It has root and twrp recovery, android 5.1.1. I've already tried the *#080# to change to MTP but it saids invalid MMI.
You could try powering off your note5 and then plugging it into your pc with it powered off. Then boot into recovery and your pc should give you a prompt that it will try to install the correct drivers. Not a 100% sure it will work but you can try it. Also what drivers did you download and install for your note 5 to be recognized by your pc? You could try theese if you haven't fixed your issue yet. Hope this helps.
http://developer.samsung.com/technical-doc/view.do?v=T000000117
laie1472 said:
You could try powering off your note5 and then plugging it into your pc with it powered off. Then boot into recovery and your pc should give you a prompt that it will try to install the correct drivers. Not a 100% sure it will work but you can try it. Also what drivers did you download and install for your note 5 to be recognized by your pc? You could try theese if you haven't fixed your issue yet. Hope this helps.
Click to expand...
Click to collapse
I tried with the ones on the Samsung official webpage, now I flashed a stock rom and still doesn't works, plus now the LED won't turn on and it rings only when I have an incomming call, but no when receiving a sms, or aney type of notifications. I'm so frustrated
What kind of pc do you have and what os are you running?
laie1472 said:
What kind of pc do you have and what os are you running?
Click to expand...
Click to collapse
Sony Vaio on Windows 7 64bits
When you plug your note 5 into your pc what does it display in device manger?
Nothing, nothing pops up, not evern a message saying that drivers couldn't be installed. Thanks for your help, I ended up selling it
Had same issue and would also not fast charge. MTP not being recognised and had to have Sprint replace it. Charge was $75 because I had no insurance but a complaint to Sprint that Samsung would not fix issue that was replicated by Sprint store allowed me to get a $75 credit on account, so a wash. Worth a shot.
---------- Post added at 11:36 PM ---------- Previous post was at 11:32 PM ----------
Also, FYI i did send it back to Samsung to repair BUT they do not have the actual issue available in their issues dropdown area so they just put issue as "would not recognized charger" Well when repair received device they tested, saw it started to charge and just send it back out without fixing anything. Very frustrating but all worked out with device replacement.

Categories

Resources