Related
I tried running Odin to unbrick back into recovery, but apparently didn't have the drivers installed (to my surprise). I hate to say it but I think I've reached the point of no return...any help would be very much appreciated.
Edit: I can't even get into dl mode and I don't have the samsung logo on the screen anymore...just a phone and computer logo.
May be you are not in dowload mode correctly.
For download mode:
1. remove battery
2. connect phone to computer
3. put battery
4. press volume up and down buttons only (no power button)
Try these steps, hope its helpful.
As far as the driver issue is concerned, downloading "Kies" is the easiest way. The phone doesn't actually work with the software, but the process of installing it will take care of any driver issues.
Search Kies in google to grab the download.
Try one click unbrick ^^ it work on mine
Sent from my SAMSUNG-SGH-I997 using xda premium
terr_bear said:
I tried running Odin to unbrick back into recovery, but apparently didn't have the drivers installed (to my surprise). I hate to say it but I think I've reached the point of no return...any help would be very much appreciated.
Edit: I can't even get into dl mode and I don't have the samsung logo on the screen anymore...just a phone and computer logo.
Click to expand...
Click to collapse
That is a download mode. It's just your Infuse saying man, something ain't right and I ain't going no farther.
Just install the samsung drivers, plug the phone in, let the drivers install and then run Odin.
atrix4nag said:
May be you are not in dowload mode correctly.
For download mode:
1. remove battery
2. connect phone to computer
3. put battery
4. press volume up and down buttons only (no power button)
Try these steps, hope its helpful.
Click to expand...
Click to collapse
According to your directions, I did it correctly...I was at a point where I could get into download mode, but I can't anymore...?
Zaidin said:
As far as the driver issue is concerned, downloading "Kies" is the easiest way. The phone doesn't actually work with the software, but the process of installing it will take care of any driver issues.
Search Kies in google to grab the download.
Click to expand...
Click to collapse
Downloaded kies to my computer...when I synced up it couldn't identify the device. I did a good amount of research before posting here...nothing seems to work
abcvn said:
Try one click unbrick ^^ it work on mine
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I'll give that a shot and let you know how it goes...thanks man
Truckerglenn said:
That is a download mode. It's just your Infuse saying man, something ain't right and I ain't going no farther.
Just install the samsung drivers, plug the phone in, let the drivers install and then run Odin.
Click to expand...
Click to collapse
That's the thing...odin would be a breeze, but I just can't get the right drivers for odin to id it...so I guess my solution would be to get kies to id my phone so I could dl the drivers and run odin, right? Easier said than done I suppose...
Thanks for the feedback guys, I really do appreciate it...
Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.
nygfan760 said:
Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.
Click to expand...
Click to collapse
Thanks, I'll give that a try too...
nygfan760 said:
Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.
Click to expand...
Click to collapse
So I shouldn't sync my phone to get drivers via kies?
terr_bear said:
So I shouldn't sync my phone to get drivers via kies?
Click to expand...
Click to collapse
No, the program itself can install them without the phone, at least kies mini will. Or you can just download the driver from here:
32 bit drivers: http://www.mediafire.com/?0b45zo7o75rc5d5
64 bit drivers: http://www.mediafire.com/?3dh4d6up72me9re
It said I successfully dl'ed the drivers, yet nothing has changed...used kies mini, restarted my comp, and tried to sync, but it still can't recognize the phone...hate to admit it, but I think I've exhausted just about every solution I could find or think of :/
get rid of kies. it's a useless program. also if it's open odin might not work, even if it's open in the background like in the system tray.
the drivers are in the most logical place you could think of. on the samsung website under device support.
http://org.downloadcenter.samsung.c...445/SGH-i997_Infuse4G_USB_Drivers_5_2_0_2.zip
http://www.samsung.com/us/support/downloads/at-t/SGH-I997ZKAATT
use the samsung cable if possible, others should work but on the older moment/intercept style phones a specific cable seems to be required. it couldn't hurt to make sure you have the correct cable.
even if you have the phone + computer screen it doesnt automatically mean you are in download mode. you may still need to do the download mode proceedure from battery pull (to make 100% sure the phone is off before you start the proceedure)
the best way is to
1 open odin
2 pull battery
3 connect the cable
4 phone should be face down
5 hold the volume buttons at the same time
6 with volume buttons depressed slide the battery into place
now you may see dwnload or you may see phone + computer or you may even see a black screen but there is a good chance that if the drivers worked that you will see a yellow box in odin
good luck
terr_bear said:
It said I successfully dl'ed the drivers, yet nothing has changed...used kies mini, restarted my comp, and tried to sync, but it still can't recognize the phone...hate to admit it, but I think I've exhausted just about every solution I could find or think of :/
Click to expand...
Click to collapse
Read what was said. Install drivers, close kies, reboot, open Odin.
Cranky...
KK4
Truckerglenn said:
Read what was said. Install drivers, close kies, reboot, open Odin.
Cranky...
KK4
Click to expand...
Click to collapse
I have tried everything, and windows 7 says the drivers are in place, but nothing happens! Trying heimdale, nothing is happeneing either.
Ryanscool said:
I have tried everything, and windows 7 says the drivers are in place, but nothing happens! Trying heimdale, nothing is happeneing either.
Click to expand...
Click to collapse
Heimdall uses completely different drivers which are installed via the one click heimdall using zadig.exe
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
If you can get to download mode, you are not bricked, and it is an issue on your part.
nygfan760 said:
Heimdall uses completely different drivers which are installed via the one click heimdall using zadig.exe
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
If you can get to download mode, you are not bricked, and it is an issue on your part.
Click to expand...
Click to collapse
I can not get anywhere, but i am installing the 64 bit drivers as im running win 7 64. I will try again, but for anyone else who has no other options and a tiny bit of cash there is some hope http://mobiletechvideos.mybigcommerce.com/samsung-infuse-4g-jtag-brick-repair/ . Suprisingly, this is not a scam as many, many people say it worked for them.
Ryanscool said:
I can not get anywhere, but i am installing the 64 bit drivers as im running win 7 64. I will try again, but for anyone else who has no other options and a tiny bit of cash there is some hope http://mobiletechvideos.mybigcommerce.com/samsung-infuse-4g-jtag-brick-repair/ . Suprisingly, this is not a scam as many, many people say it worked for them.
Click to expand...
Click to collapse
Get UnBrickable mod. That works well. I use it whenever I put my device into download mode. Just send me a pm and ill do it for $30+shipping. UBM lets you upload download mode to a device regardless of its state. I spent alot of time researching the methods and I came up with the mod for this device not too long ago.
UBM is the best option. Here is a demo on a captivate. We rewrote the HIBL for compatibility with the infuse4g
Thanks for all the help guys, but absolutely nothing I tried was working and I was short on time and patience...so you gave in to the JTAG unbrick service. I couldn't stand to pay for a service that I was sure I could perform myself, but when it got down to it, I didn't have time to deal with I all. I can confirm that it is a legit service. Great communication and Josh does quick work of getting things working again...I'm a firm supporter of DIY, but if you do reach the point of no return like I did, it's a very reliable resource.
terr_bear said:
Thanks for all the help guys, but absolutely nothing I tried was working and I was short on time and patience...so you gave in to the JTAG unbrick service. I couldn't stand to pay for a service that I was sure I could perform myself, but when it got down to it, I didn't have time to deal with I all. I can confirm that it is a legit service. Great communication and Josh does quick work of getting things working again...I'm a firm supporter of DIY, but if you do reach the point of no return like I did, it's a very reliable resource.
Click to expand...
Click to collapse
I have a suggestion. I also had this issue. The problem was my main PC. I simply used my old laptop and it worked like a dream. I know thus seems too simple but it has worked for several people.
Use GTGs Ultimate Unbrick on a different computer.
Just my 2¢
I have rooted many phones but DO NOT consider myself an expert in any way but after countless hours on the search, I am just STUCK And seriously frustrated. Here is my complicated story.
I was rooted but without a custom ROM. In the progress upgraded to 4.3 OTA. Since then my phone has been on the decline...the WI-FI does not turn on, the GPS is erratic, and now I cannot connect via USB to anything.
I have done everything imaginable and suggested to my PC (WIN8) as well as the phone. I cannot connect via ODIN nor KIES as I cannot get the USB to work.
In ODIN Mode I have:
PRODUCT NAME: SCH-I535
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: Enable
WARRANTY BIT: 1
BOOTLOADER RP SWREV: 1
I would prefer to downgrade although I have read this is not an option at this point.
to have functional Wi-Fi and USB connectivity would be great to have again.
Please help!!!
Is my phone considered to be SOFT-Bricked?
Try a new cable and/or a different USB port.
Also kies3 is required. The old kies will not connect to any 4.3 or higher android device. Make sure you have the latest drivers as well
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
Also make sure you have USB debugging on. Go to settings and about phone. Tap on the version several timea and it will bring out the developer options.
Sent from my SCH-I535 using xda app-developers app
Go on kies make sure your phone in UNplugged then click connection trouble shoot. Same thing was happening to me on windows 8 so I temporarily went back to 7. It looks like the drivers get messed up if you go from lets say the download mode drivers to the normal drivers. It seemed like every time before I connected my phone I had to do that.
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
Kies 3 does not have the drivers for this phone
ThePagel said:
Go on kies make sure your phone in UNplugged then click connection trouble shoot. Same thing was happening to me on windows 8 so I temporarily went back to 7. It looks like the drivers get messed up if you go from lets say the download mode drivers to the normal drivers. It seemed like every time before I connected my phone I had to do that.
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
Kies 3 does not have the drivers for this phone
Click to expand...
Click to collapse
Thanks for the reply and suggestions.
I have tried three different cables, installed Kies 3, two different computer and multiple ports on both systems with all the phone settings as suggested. I now get the following message when connected to the USB cable: USB Device not recognized. Device malfunctioned and Windows (8) does not recognize it. I have removed all software, reinstalled phone drivers.
Sooo frustrating!
ivndrago said:
Thanks for the reply and suggestions.
I have tried three different cables, installed Kies 3, two different computer and multiple ports on both systems with all the phone settings as suggested. I now get the following message when connected to the USB cable: USB Device not recognized. Device malfunctioned and Windows (8) does not recognize it. I have removed all software, reinstalled phone drivers.
Sooo frustrating!
Click to expand...
Click to collapse
Why do you want to connect to kies? It has 4.1.2 it will always fail the flash for us 4.3 people. Use the Verizon updater or odin. Just a fyi kies will never say it recognizes the phone in downloadmode.
ThePagel said:
Why do you want to connect to kies? It has 4.1.2 it will always fail the flash for us 4.3 people. Use the Verizon updater or odin. Just a fyi kies will never say it recognizes the phone in downloadmode.
Click to expand...
Click to collapse
My problem is I cannot get the computer to recognize the phone. I have tried using the code to get into Qualcomm PhoneUtils but I guess I am not sure if that applies to my model phone. This would allow me to confirm the USB settings (MTB?) of the phone.
At this point, any connection would be a HUGE step forward.
Thanks for your help.
ivndrago said:
My problem is I cannot get the computer to recognize the phone. I have tried using the code to get into Qualcomm PhoneUtils but I guess I am not sure if that applies to my model phone. This would allow me to confirm the USB settings (MTB?) of the phone.
At this point, any connection would be a HUGE step forward.
Thanks for your help.
Click to expand...
Click to collapse
You can boot up the phone to a useable state correct?
ThePagel said:
You can boot up the phone to a useable state correct?
Click to expand...
Click to collapse
Yes, the phone is operational; that is to say it makes and receives calls. The Wi-Fi does not turn on and the GPS is very erratic. I have not found any other problems yet, but I am sure that they must be others....
ivndrago said:
Yes, the phone is operational; that is to say it makes and receives calls. The Wi-Fi does not turn on and the GPS is very erratic. I have not found any other problems yet, but I am sure that they must be others....
Click to expand...
Click to collapse
That sucks at least you can make calls. Hope you figure it out. Maybe it has something to do with your warranty bit.
---------- Post added at 01:11 PM ---------- Previous post was at 01:01 PM ----------
Just one more thought. I know you said you tried everything but did you try a factory reset then on first login when Google asks to import saved data like WiFi settings uncheck the box?
Galaxy S3 on 4.3 with Samsung Custom ** FIXED **
This appears to be the fix to my problems.
http://forum.xda-developers.com/showthread.php?t=2586319
Thanks a ton to ThePagel
Hello everyone!
So, the problem is, when i connect my Nexus 5 into the Computer (via USB cable) the computer doesn't seem to recognize the device...
by "doesn't recognize" I mean not even in Device Manager, The only thing it does is charging up the device.
I tried many things such as:
*Factory Resetting my Device
*Different Computers (one of them is brand new laptop running windows 8.1, another one is normal running windows 7)
*tried to install driver solutions from a Nexus Toolkit
*swapping USB cables / ports on the PC
*Selecting MTP / PTP and plugging / unplugging between
Info:
I'm on a brand new laptop running Windows OS 8.1
My device is rooted and running a flashed zip of Lolipop 5.0
I'm using TWRP Recovery.
I tried looking for a solution in the web including this forum but I can't seem to figure it out.
If by any chance you know the solution to this problem please inform me of it, Thanks alot!
chuckapilhard said:
Hello everyone!
So, the problem is, when i connect my Nexus 5 into the Computer (via USB cable) the computer doesn't seem to recognize the device...
by "doesn't recognize" I mean not even in Device Manager, The only thing it does is charging up the device.
I tried many things such as:
*Factory Resetting my Device
*Different Computers (one of them is brand new laptop running windows 8.1, another one is normal running windows 7)
*tried to install driver solutions from a Nexus Toolkit
*swapping USB cables / ports on the PC
Info:
I'm on a brand new laptop running Windows OS 8.1
My device is rooted and running a flashed zip of Lolipop 5.0
I'm using TWRP Recovery.
I tried looking for a solution in the web including this forum but I can't seem to figure it out.
If by any chance you know the solution to this problem please inform me of it, Thanks alot!
Click to expand...
Click to collapse
Try going to "settings"
"storage"
Menu. Click the 3 buttons top right under the time (this is the menu button)
"Choose USB computer connection"
Change from MTP to PTP and see if the device shows up in device manager. Then change it back to MTP and see if it showed up in device manager. If it does on either uninstall what ever driver is installed and reboot computer. Then connect device to PC and see if computer recognizes your phone, if it does let it finish installing and browse to device manager and install the USB drivers put out by google here http://developer.android.com/sdk/win-usb.html or alternatively use the naked drivers here http://www.xda-developers.com/andro...r-solves-your-adb-driver-problems-on-windows/
I found that simply plugging and unplugging usb while looking at device manager you can find out what usb it is.
Finally if you could not find out anything above, I had an issue where my usb connection was full of lint from my pocket. The cable was not seating properly inside the phone from the lint obstruction. I could not get the USB drivers or my phone to charge properly. It kept disconnecting and I eventually cleaned the phone with a q-tip and a toothpick, sometime the phone connector could bend so you could try to bend it back, mine has been good every since. I'm not saying shove something in it and bend it/break it. I'm simply saying to lightly clean it or pry it up so that it makes a better connection and make sure that your USB is properly seated.
Jnewell05 said:
Try going to "settings"
"storage"
Menu. Click the 3 buttons top right under the time (this is the menu button)
"Choose USB computer connection"
Change from MTP to PTP and see if the device shows up in device manager. Then change it back to MTP and see if it showed up in device manager. If it does on either uninstall what ever driver is installed and reboot computer. Then connect device to PC and see if computer recognizes your phone, if it does let it finish installing and browse to device manager and install the USB drivers put out by google here http://developer.android.com/sdk/win-usb.html or alternatively use the naked drivers here http://www.xda-developers.com/andro...r-solves-your-adb-driver-problems-on-windows/
I found that simply plugging and unplugging usb while looking at device manager you can find out what usb it is.
Finally if you could not find out anything above, I had an issue where my usb connection was full of lint from my pocket. The cable was not seating properly inside the phone from the lint obstruction. I could not get the USB drivers or my phone to charge properly. It kept disconnecting and I eventually cleaned the phone with a q-tip and a toothpick, sometime the phone connector could bend so you could try to bend it back, mine has been good every since. I'm not saying shove something in it and bend it/break it. I'm simply saying to lightly clean it or pry it up so that it makes a better connection and make sure that your USB is properly seated.
Click to expand...
Click to collapse
well i tried what you just said, it didn't work sadly but I just tried to connect it to my cousin PC and it worked properly
so I guess its something about the computer... Do you know any possible solution? thanks for trying anyway
I had a LG phone driver before that didn't allow my NEXUS 5 to be recognized once before, I think i solved it by connecting my old phone to the PC and uninstalled drivers via device manager. Other than that dude I'd just have to tinker until I figured it out.
---------- Post added at 05:16 PM ---------- Previous post was at 05:12 PM ----------
http://developer.android.com/tools/extras/oem-usb.html#InstallingDriver
---------- Post added at 05:18 PM ---------- Previous post was at 05:16 PM ----------
Just googled "troubleshooting nexus 5 drivers" shows some interesting articles. Worth a shot?
Jnewell05 said:
I had a LG phone driver before that didn't allow my NEXUS 5 to be recognized once before, I think i solved it by connecting my old phone to the PC and uninstalled drivers via device manager. Other than that dude I'd just have to tinker until I figured it out.
---------- Post added at 05:16 PM ---------- Previous post was at 05:12 PM ----------
---------- Post added at 05:18 PM ---------- Previous post was at 05:16 PM ----------
Just googled "troubleshooting nexus 5 drivers" shows some interesting articles. Worth a shot?
Click to expand...
Click to collapse
well, we are talking on a brand new pc... so i dont have any drivers installed yet..
the problem is not installing drivers, its getting the pc to recognize the device as a device... right now it only send power to charge the device...
chuckapilhard said:
well, we are talking on a brand new pc... so i dont have any drivers installed yet..
the problem is not installing drivers, its getting the pc to recognize the device as a device... right now it only send power to charge the device...
Click to expand...
Click to collapse
Try plugging the phone into a usb 2 0 port if your comp has one. Some people have had issues using a 3.0 port.
theesotericone said:
Try plugging the phone into a usb 2 0 port if your comp has one. Some people have had issues using a 3.0 port.
Click to expand...
Click to collapse
tried every usb port on the pc and it didnt work thanks for the suggestion though. anyone else?
chuckapilhard said:
well, we are talking on a brand new pc... so i dont have any drivers installed yet..
the problem is not installing drivers, its getting the pc to recognize the device as a device... right now it only send power to charge the device...
Click to expand...
Click to collapse
chuckapilhard said:
tried every usb port on the pc and it didnt work thanks for the suggestion though. anyone else?
Click to expand...
Click to collapse
Sorry man I should have read the op a little better. Try this:
http://www.androidpit.com/nexus-5-problem-connecting-to-pc
theesotericone said:
Sorry man I should have read the op a little better. Try this:
[]
Click to expand...
Click to collapse
'
hmm this article still says that i need to update drivers throug'h device manager...
I'll say it again, I cannot see my device in device manager nor anything related to him such asndroid composit adb etc...
i tried refreshing and connecting / disconnecting the phone while staring at device manager to catch the phone connection but nothing appeard /. disappeard
I'm in a real issue here, and i tried many things to solve it but nothing seems to fix it...
thanks for help so far any other ideas?
Turn off USB Debugging (if you haven't already, assuming it's on) and see if it works. Probably not, but it does happen to some people
EddyOS said:
Turn off USB Debugging (if you haven't already, assuming it's on) and see if it works. Probably not, but it does happen to some people
Click to expand...
Click to collapse
i cannot count how many times ive tried that :/ but thanks for the suggestion
I tried to do something with the windows recovery and it installedf some drivers successfully but still device won't show up in Device Manager...
I'm seriously stuck guys a help would be mucvh appreciated really!
chuckapilhard said:
i cannot count how many times ive tried that :/ but thanks for the suggestion
I tried to do something with the windows recovery and it installedf some drivers successfully but still device won't show up in Device Manager...
I'm seriously stuck guys a help would be mucvh appreciated really!
Click to expand...
Click to collapse
It seems like you've tried all the steps i know of. Have you tried plugging another device into the comp to make sure it's not hardware issue on the comps side? You could also live boot an Ubuntu CD and see if it's recognized with a different os.
the problem is due to win usb generic drivers that doesn't work
http://forum.xda-developers.com/google-nexus-5/help/problem-pc-t2858740/post55059501#post55059501
follow these instructions then install google usb drivers http://developer.android.com/sdk/win-usb.html
theesotericone said:
It seems like you've tried all the steps i know of. Have you tried plugging another device into the comp to make sure it's not hardware issue on the comps side? You could also live boot an Ubuntu CD and see if it's recognized with a different os.
Click to expand...
Click to collapse
i tried connecting an lgg3 and it didnt work eigher, earlier today i went to the store where i bought the pc and they couldnt figure it out....
im srsly out of ideas..
chuckapilhard said:
i tried connecting an lgg3 and it didnt work eigher, earlier today i went to the store where i bought the pc and they couldnt figure it out....
im srsly out of ideas..
Click to expand...
Click to collapse
Could be the serial bus controller in the comp is bad. If you have a USB stick laying around plug that in and see if the comp detects that. If it doesn't see any external devices its a defective component in the comp.
theesotericone said:
Could be the serial bus controller in the comp is bad. If you have a USB stick laying around plug that in and see if the comp detects that. If it doesn't see any external devices its a defective component in the comp.
Click to expand...
Click to collapse
tried 2 sifferent USB sticks 1- 8GB (worked) one 64 GB (worked) and i tried an external hard drive 500GB (worked)
Its something to do with mobile phones only (atleast from the things i tried)
Is your computer an Acer?
---------- Post added at 08:38 PM ---------- Previous post was at 08:29 PM ----------
You seem quick to dismiss an issue with your computer. I honestly believe it is the computer drivers. Even brand new there are pre installed drivers on your PC that could interfere with the Nexus 5. Its possible that its registered in the PC device manager as something other then nexus or under something other then USB or portable devices. I've seen this so many times. Its also possible that the phone or USB are malfunctioning but I don't think you've exhausted all options software wise yet.
my computer is a Lenovo brand, I tried everything i know, if you have any suggestions I will appreciate it alot thanks for helping me so far.
chuckapilhard said:
my computer is a Lenovo brand, I tried everything i know, if you have any suggestions I will appreciate it alot thanks for helping me so far.
Click to expand...
Click to collapse
If you have USB 2 and 3 ports, try using USB 2. Short of that, its cables...
Well I tried USB 2.0 ports too it might be the cables although I tried 3 different ones but I'll try to get the one it worked with on another PC...
Sent from my Nexus 5 using XDA Free mobile app
Hello guys!
I have been using my 1+1 since september. Everything was allright! I have changed rom and kernel many times, so it means that i have got my ADB installed and know something about tweaking a phone. I say that, becouse last time i asked for a help, i heard only simple solutions. I already tried them all.
So, my problem is:
When i connect my phone to PC 1+1 start to charge, but PC can`t see him. I have tryed it on 4 different pc (all windows 8 or 8,1 (64)) and 2 different cables (native and my old one). All PC can`t even find 1+1 in device manager. Ofcourse i have confirmed USB-debugging, MTP etc. This problem suddenly appeared without a reason.
So i used native reset function and now my phone got no Root and Recovery. I don`t know what to do. Any ideas?
Any help. guys?
Still need help
Did you update your SDK?
If you're using the original USB cable that came with the phone try swapping it with a non-OPO cable.
TheManDroid said:
If you're using the original USB cable that came with the phone try swapping it with a non-OPO cable.
Click to expand...
Click to collapse
test with another PC?
Two other OPO users had similar issues and it turned out to be the original cable. That is why I'm suggesting a different cable.
I have used another cable and 3 different PC. Still cant find my phone!
updated SDK but it didnt help
Weird. Try uninstall all driver. Then re-install back OPO driver. I think that is not cable issue since you have tried different pc and cable. Hmmm really weird.
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
@xanthrax need your help on this. Really weird problem. What do you think?
Just need your experience
i`m a bit confuse here
on the first post he says " after reset , no root no recovery"
what`s the status now ?
try pdanet app, it comes with universal adb drivers
i already installed reinstalled uninstalled drivers. i hae tryed all manipulations with drivers
etm my phone has no recovery or root, beacouse i did factory reset (thought it might help). so i cant install another rom (beacouse cant use abd fastboot or recovery)
any other ideas??
maybe its problem with phone usb port
Did you try like what xanthrax said? Try it first then let us know it help or not.
Weird. Charge can detected but not showed up on your pc. Hmm
rafiuddinrozman said:
Did you try
Click to expand...
Click to collapse
i have tryed to install that app to pc and opo. useless. still cant find drivers. seems like the problem is in my phones usb port ((
Use your warranty bro. Goodluck mate !
It happens when one of the pins for data gets f****d up so most probably nothing to do... USB hub replacement
Unrecognized by 4 different pc's and cables doesn't sound good at all
Sent from my Darkside of 1+1
Please help me out somebody. Whenever I connect my mate 7 with pc, it shows usb not recognised. Some info :
1. All drivers are fine . Nothing wrong in pc
2. Tried usb debugging on off but no effect.
3. Factory reset the phone. No effect. Currently I am on 4.4..4 firmware with cwm recovery installed.
4. I also got replaced its charging dock port but then also it is no working.
5. Changed usb cable too . no effect.
6. Actually I want to update my phone to 5.0 or 6.0 but for I should be on stock recovery which can only be flashed in fastboot mode . But as usb is not working cant flash it in fastboot mode.
So please tell me is there any way to flash stock recovery without using usb cable ?
Or any otherway I can update my phone to lollipop or marshmallow over kitkat without stock recovery and data cable ?
first phone model?
Sent from my HUAWEI MT7-TL10 using Tapatalk
---------- Post added at 07:01 PM ---------- Previous post was at 07:00 PM ----------
and your computer system operating sytem?in win8or 10 you make unknown device recognize
Sent from my HUAWEI MT7-TL10 using Tapatalk
demirozu69 said:
first phone model?
Sent from my HUAWEI MT7-TL10 using Tapatalk
---------- Post added at 07:01 PM ---------- Previous post was at 07:00 PM ----------
and your computer system operating sytem?in win8or 10 you make unknown device recognize
Sent from my HUAWEI MT7-TL10 using Tapatalk
Click to expand...
Click to collapse
Phone model is - MT7-TL10 international version.
And I have tried it in all os - windows xp, 7, 8 , 10 but in all it shows usb not recognised .
try this in win 8 or win 10:
http://forum.xda-developers.com/galaxy-nexus/general/tutorial-installing-adb-fastboot-t1982718
demirozu69 said:
try this in win 8 or win 10:
http://forum.xda-developers.com/galaxy-nexus/general/tutorial-installing-adb-fastboot-t1982718
Click to expand...
Click to collapse
I already know this thing. but the point is computer is showing usb not recognised not the driver issue. In device manager following message comes in front of my device .
"unknown usb device descriptor failed"
sachinwadhwa46 said:
Please help me out somebody. Whenever I connect my mate 7 with pc, it shows usb not recognised. Some info :
1. All drivers are fine . Nothing wrong in pc
2. Tried usb debugging on off but no effect.
3. Factory reset the phone. No effect. Currently I am on 4.4..4 firmware with cwm recovery installed.
4. I also got replaced its charging dock port but then also it is no working.
5. Changed usb cable too . no effect.
6. Actually I want to update my phone to 5.0 or 6.0 but for I should be on stock recovery which can only be flashed in fastboot mode . But as usb is not working cant flash it in fastboot mode.
So please tell me is there any way to flash stock recovery without using usb cable ?
Or any otherway I can update my phone to lollipop or marshmallow over kitkat without stock recovery and data cable ?
Click to expand...
Click to collapse
i am living same problem ... did you find any way to fix it?
cxc said:
i am living same problem ... did you find any way to fix it?
Click to expand...
Click to collapse
Did your phone charge at very slow rate with official data cable ?
Have you got your battery got replaced since you have buyed the phone ?
sachinwadhwa46 said:
Did your phone charge at very slow rate with official data cable ?
Have you got your battery got replaced since you have buyed the phone ?
Click to expand...
Click to collapse
it taking ~6 hour to charge, i didnt change battery. actually i used cheap charger while couple day then it didnt work when plug the computer. phone still have about 1 year warranty but i am not sure is it my fault or producer.
cxc said:
it taking ~6 hour to charge, i didnt change battery. actually i used cheap charger while couple day then it didnt work when plug the computer. phone still have about 1 year warranty but i am not sure is it my fault or producer.
Click to expand...
Click to collapse
The next big thing happened to me is one day it got off suddenly and after that it nvr got on. On charging only the red battery logo comes with red led blinking and nothing happens even if i leave it charging for whole day.
Then i by passed battery and then connected cable then boot animation comes for a second.
So i doubt it might be faulty battery in our case or a typical hardware issue.
Actually this phone was not released in my country so i have ordered battery and it is arriving within 2 days. And you have btter chance to get the phone rectified by huawei. Also ask them what was the fault , it might help me if battery did not works.