Database Info

LG P920 bricked after playing with CWM.exe

I decided I wanted to change the firmware .. I did not do this for the first time so I downloaded the beta Accura SAMBA v2, with ciekowości with UPK.zip. I plugged the phone to upload ZIPA the card and started | drinking heavy digging in UPK.zip CWM.exe shoved and there, not knowing that he will immediately do something. It turned out that he started flashign - now like a brick phone detects omap4430 but after installing the drivers in Device Manager / Ports LG CDMA, there is no serial ports and LGflash Tool does not detect my phone. The system is win xp. Could only service?
(google translate)

did you try putting it in download mode take the battery out hold volume down and power i think then plug the usb in keep holding buttons tell the phone vibrates or device manager finds it.

Which OS are u using(Windows 7 or XP). I bricked the phone multiple times trying to install the wrong CWM onto the phone as the latest version of rom manager did not have the O3D as an option. I tried to recover in Windows 7 and couldn't. Had to be done in Windows XP.
If it is still bricked, let me know and i will forward a link to the recovery page to get the phone back up and running.
Kavir

Prior to obtaining answers the phone sent the unit if the warranty does not include a guarante (phone rooted) back to the topic.
(google translate)

[Q] Help me.. My Lg optimus one p500.. BRICKED ???

On instalation with kdz file show me KDz Error and i ll removed a battery in emergency mode....And now my phone won't turn on..
Help me....
hard bricked my LG Optimus One when i remove a battery after kdz error..
my phone can't Connect on PC i have instaled USb drivers properly....After removed a battery in kdz error on emergency mode phone won't turn

There is an emergency mode you can try as long as you have the software on your computer to flash factory settings on to your phone.
Toemergency mode:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
**I DONT OWN THIS DEVICE** but i had a few cases and this should work for you too

...........
ThatLatinGuy said:
There is an emergency mode you can try as long as you have the software on your computer to flash factory settings on to your phone.
Toemergency mode:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
**I DONT OWN THIS DEVICE** but i had a few cases and this should work for you too
Click to expand...
Click to collapse
Thanks Buudy for this but is no worked i do it that....my phone still won't turn on
My PC don't a find any usb cable from the phone..in the device menager in PORTS show me UKNOWN USB !
i can't connect a phone on PC
i have several android softwares...
i think a instalation is not complete on my phone and i wanna find some TOOL program for Clean a not completed instalation...
maybe in the phone hardware is broken processor...but i don't sure for that... .
Give me some tool for clean a not completed instaltion.... BC wipe is a for parchase 20$ Some FREE if u Know...
Or something other instruction for a connect phone to the PC...
Sorry for bad english.... :laugh:

Deki1231 said:
Thanks Buudy for this but is no worked i do it that....my phone still won't turn on
My PC don't a find any usb cable from the phone..in the device menager in PORTS show me UKNOWN USB !
i can't connect a phone on PC
i have several android softwares...
i think a instalation is not complete on my phone and i wanna find some TOOL program for Clean a not completed instalation...
maybe in the phone hardware is broken processor...but i don't sure for that... .
Give me some tool for clean a not completed instaltion.... BC wipe is a for parchase 20$ Some FREE if u Know...
Or something other instruction for a connect phone to the PC...
Sorry for bad english.... :laugh:
Click to expand...
Click to collapse
Your device is hard-bricked. Your only bet in LG. Go to LG and tell them you turned it off, and now it doesn't start up

That thing happened to my phone a year ago. You can't do nothing at home. Go to a service.
------------------
Sent from my LG-P500 using xda-developers app
Android 2.3.7
Cyanogen Mod 7.2

Can u Plz tell Whr I can download stock rom for lg optimus one in Kdz format
Sent from my GT-I9082 using Tapatalk 2

Jiayu G3S MT6589 Bricked without any flashing

Hello,
I have Jiayu G3S MT6589 and phone was working perfect, I was keeping it in my pocket and yesterday i took the phone off the pocket and i couldn't boot it. I can't charge it either. I tried to put other battery in my phone and it still didn't boot up. But when i connect it by USB i can see that its MTK USB Port, or MTK DA port or something like this (that's after installing drivers, before I installed it i was getting Unknown Device on the list - it shold be MT65xx Preloader) So i tried to flash a stock rom (SP flash tool), but i can't do it too - I'm getting error connected with DRAM, or the red bar is loading like 100% and then nothing..I can wait and wait and nothing more...
I didn't broke my phone like it was never on the floor or something like that and I didn't change Preloader by SP Flash Tools
It's very important to me to fix it fast because I'm working on dual sim and I need smartphone... I don't want to send it back to China - it would take at least 2 months to complete repair, so I'm determinated to do it on my own, but I need your help...

crackgm said:
Hello,
I have Jiayu G3S MT6589 and phone was working perfect, I was keeping it in my pocket and yesterday i took the phone off the pocket and i couldn't boot it. I can't charge it either. I tried to put other battery in my phone and it still didn't boot up. But when i connect it by USB i can see that its MTK USB Port, or MTK DA port or something like this (that's after installing drivers, before I installed it i was getting Unknown Device on the list - it shold be MT65xx Preloader) So i tried to flash a stock rom (SP flash tool), but i can't do it too - I'm getting error connected with DRAM, or the red bar is loading like 100% and then nothing..I can wait and wait and nothing more...
I didn't broke my phone like it was never on the floor or something like that and I didn't change Preloader by SP Flash Tools
It's very important to me to fix it fast because I'm working on dual sim and I need smartphone... I don't want to send it back to China - it would take at least 2 months to complete repair, so I'm determinated to do it on my own, but I need your help...
Click to expand...
Click to collapse
if you didnt mess up with anything, its hw issue i would say

crackgm said:
Hello,
I have Jiayu G3S MT6589 and phone was working perfect, I was keeping it in my pocket and yesterday i took the phone off the pocket and i couldn't boot it. I can't charge it either. I tried to put other battery in my phone and it still didn't boot up. But when i connect it by USB i can see that its MTK USB Port, or MTK DA port or something like this (that's after installing drivers, before I installed it i was getting Unknown Device on the list - it shold be MT65xx Preloader) So i tried to flash a stock rom (SP flash tool), but i can't do it too - I'm getting error connected with DRAM, or the red bar is loading like 100% and then nothing..I can wait and wait and nothing more...
I didn't broke my phone like it was never on the floor or something like that and I didn't change Preloader by SP Flash Tools
It's very important to me to fix it fast because I'm working on dual sim and I need smartphone... I don't want to send it back to China - it would take at least 2 months to complete repair, so I'm determinated to do it on my own, but I need your help...
Click to expand...
Click to collapse
Hi
Try this:
1:Remove the battery, and keep the phone WITHOUT the battery for >2 hours
2: Re-insert the battery and charge the phone (check if its charging) either by the led (in case it haves one), or by the off-line charge animation
3: If its charging GOOD , continue to the next step, if its not, im affraid its really bricked (if the phone doesnt display the off-line charge animation its in most mtk devices an hard brick)
4: If the phone charges ok, then re-flash ALL the nand via SPFlashTools (including the pre-loader) keep in mind to flash the right spflashtools rom version
5: And of course you need to have the Mediatek drivers installed for this to work, if your using windows8 , you may have some drivers problems, since the mediatek drivers have issues with this windows version, so just use windows 7 or xp.
For the drivers download this ones:
http://forum.xda-developers.com/devdb/project/dl/?id=4282
This are Universal Mediatek drivers...
Good Luck
Best regards

superdragonpt said:
Hi
Try this:
1:Remove the battery, and keep the phone WITHOUT the battery for >2 hours
2: Re-insert the battery and charge the phone (check if its charging) either by the led (in case it haves one), or by the off-line charge animation
3: If its charging GOOD , continue to the next step, if its not, im affraid its really bricked (if the phone doesnt display the off-line charge animation its in most mtk devices an hard brick)
4: If the phone charges ok, then re-flash ALL the nand via SPFlashTools (including the pre-loader) keep in mind to flash the right spflashtools rom version
5: And of course you need to have the Mediatek drivers installed for this to work, if your using windows8 , you may have some drivers problems, since the mediatek drivers have issues with this windows version, so just use windows 7 or xp.
For the drivers download this ones:
http://forum.xda-developers.com/devdb/project/dl/?id=4282
This are Universal Mediatek drivers...
Good Luck
Best regards
Click to expand...
Click to collapse
Thanks for your reply... I left the phone without battery for 4 hours, and it's not charging...
But what I've noticed:
When i connect phone with battery it shows on computer as MTK USB Port, then when i take the battery out (and it's still connected) it disappears, but when i hold VOL- it shows again, but still I can't flash...
I've checked voltage on phone (battery slot) and it's like 0.5V-2V when the phone is connected, so I guess the phone charges the battery...

I've decided to send it back to Pandawill but they requested a short movie showing what is happening...
I'll send phone on Monday if it won't start, so if you have any ideas to make it work...I will be very happy
Thanks

I had this for a number of G3S and G3ST devices, usually after a year or two of usage. These emmc chips from china phones wear out too fast.
If you are know what you doing then if
1. Preloader is loaded but (so USB cable and internal cable between connection board and motherboard is ok)
2.
I'm getting error connected with DRAM, or the red bar is loading like 100% and then nothing..I can wait and wait and nothing more...
Click to expand...
Click to collapse
its dead eMMC chip.
You can replace it in local service, you just need engineer skilled enough to make reboll. Also you can get a bonus - internal flash memory upgrade from 4GB to 8GB or maybe even more.
Detailed http://forum.xda-developers.com/showpost.php?p=63339985&postcount=213

Bricked A536

Hello. I have big problem-
I had the TWRP om my phone with custom rom and all worked fine.
Today i wanted to get my phone back as original so i downloaded original rom.
Started SP flashtools and used android scatter file from original android rom. Everything was fine till the end of downloading (it took like 10 mins! when i got some error : S_DL_GET_DRAM_SETTING_FAIL (5054)
I tried to to the steps again, start SP flashtools, press to download, plug the cable. Heard the sound of connected USB (cable) but immediatelly i hear the disconnect of the cable with phont and i got message:
BROM ERROR: S_FT_DA_NO_RESPONSE (4001)
DA didnt responsne data to flashtools
And now i can not do nothing. When i check device manager, i see USB serial device only. No mtk, no mediatek. I tried some ways how to install the driver but idk. i am failing. I am retard oh god...
Still, i heard that there is still the way to make this phone work because it is mediatek based.
Can you guys please help me?
I am using Windows 10 but i also can use Zorin OS Linux. Windows is default.

Good damn guys i was so sad but i managed to fix the thingy and now my phone is working back again.
As most of ppl what i was able to read so far, had the problem with recognizing phone without battery. PC was not able to recognize it as Mediatek, just some random serial device. Nothing really worked and i was about to ....nvm
But what i tried is, to do NOT remove the battery. I pressed the VOLUME UP button, while i hold it and while battery was inside i started flash tool. Pressed download an dthen while i was holding the button volume UP and with battery in, it suddently was able to find the device and it flashed my phone.
Oh deear i am so happy . Maybe this will help to someone so back again
If your device is not recognized as MEDIATEK device and you need to use SP Flash Tools to flash the ROM, use the following
Remove SIM cards, SD Card
Leave battery in phone
Run sp flash tools and set your settings as you need (load scatter file from your unpacked rom)
Press the download button in SP FLash Tools
Now, still do not remove battery. Press the Volume UP button and hold it
Plug in the USB cable into PC and into Phone while you still holding the volume button
Release the volume button right in moment, when your device is plugged in and found by system (YOu hear the connected sound).
Now i believe, everything works and its flashing your phone
If not. so i was lucky as f....

Great
Thanks, this is great.

help| hard bricked my h830 after trying to flash another rom..

i rooted my phone and i wanted to switch rom for it,i flashed h850 rom rebooted device and it wont boot...i figured im on qualcomm 9008 mode in my computer so what can i do?
please please help me!!
thanks in advance..

Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...

Dark Nightmare said:
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Click to expand...
Click to collapse
You probably didnt understand me well.. I cant put it in any mode...it wont turn on on any condition..

You said you rebooted twice, that tells me the device powers on, therefore, by doing a battery pull, holding the recovery or download mode button combos and powering up should get you into the desired mode. IF its not powering on at all:
1. Try charging the battery externally and try again.
2. See if the device is being recognized by a pc, if so there is hope that resting the device and trying again may work or we can see what mode it is in via adb/fastboot to get the device into a recoverable mode.
So....

Dark Nightmare said:
You said you rebooted twice, that tells me the device powers on, therefore, by doing a battery pull, holding the recovery or download mode button combos and powering up should get you into the desired mode. IF its not powering on at all:
1. Try charging the battery externally and try again.
2. See if the device is being recognized by a pc, if so there is hope that resting the device and trying again may work or we can see what mode it is in via adb/fastboot to get the device into a recoverable mode.
So....
Click to expand...
Click to collapse
The computer recognizes my device as qualcomm 9008

I have the same problem. My phone is dead only shows Qualcomm 9008.

Silly... If it's not for your phone why would you flash it??? Might have to wait for the official kdz from lg assuming you can some how get it into download mode. Or simply use your insurance for a new device. Expensive lesson learned

Maybe you can try the lg mobile support tool, since a tot file is available LG may have the stock kdz file available now, so try the recovery option for the mobile support tool.

Pretty sure that Qualcomm message thing is the true hard brick...
Sent from my pretty nifty brand new LG V10

This might sound stupid and it is usually for devices which have problems turning on or similar. I think is better to try anything that not trying all the options.
Why dont you try removing the battery, then close the module part without the battery. Press and hold the power button for at least 30 seconds. then release it. then put the batttery back on and try to make it boot into download mode. Chances are slim but the chance still there. This worked with my Samsung galaxy s5 after i flashed a rom that claimed to be for all models including the tmobile version when it clearly was for the g900f version . and i decided to try what i have done with other types of electronics and it worked.

Just tried on my phone. No go. Still dead. Trying lg repair. Hope I can get it fixed and not cost a arm and a leg.

Here is a guide to recover from 9008 mode
Here is a tool to extract kdz from tot
I've not read through these all the way, but if the PC sees it at all, it's not truly bricked... It might just be a pain in the ... to get it fixed. Those 2 links are good starting points for you. I hope you get this resolved.

I have the same error... My LG g5 H860 no turn on only connect in the PC on mode Qualcomm HS-USB QDLoader 9800.
Any idea or solution to resolve this?
Thx
BR

Dark Nightmare said:
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Click to expand...
Click to collapse
same issue just that my lgg5 tm is stuck on the firmware update for trying to root via lgup/tot file now not even lg bridge reads the phone it wants to then it says can not odetect nothin has worked