I am trying to use SWM to install the DroidXIME-nonroot.apk on an HTC Aria using Windows XP.
When I choose the file I get the ready to install screen but when I push ok I get the following error:
Unhandled exception has occurred in your application. If you click Continure, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.
Could not find a part of the path [my chosen path]
When I click continue I'm brought to the home SWM page but am unable to click Go.
I read that this is because I need the MDAC program for Windows. However, I was told I am unable to install the download because of my version of windows. I then read that I needed to overcome this problem by doing a windows service pack update; which I did. However, I am getting the same problem and am beyond frustrated.
Can someone help me please????
I've developed two very simple apps for my nexus s. I've installed the first one without any problems, but when I try to install the second one I get this error message: "Failure [INSTALL_FAILED_ALREADY_EXISTS]". The apps are two completely different apps created under two different projects. I've tried signing both with the debug key and I've also tried signing both with my own private key but I still get the same error message. I even tried signing one of them with the debug key and one with my own private key and I get this error message: "Failure [INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES]". How do I install both apps on my phone?
First failure . Please take a look in both application manifest.xml . It seems that both applications have the same name (or in android name = package)
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
package="HERE SHOULD BE DIFERENT"
Second failure. It seems that after you installed an app with the debug signature you are trying to install it with a different signature . Please uninstall the application first.
Hope it helps
Thank you very much. That's the answer.
Hi everyone. i have read everything and having trouble.
after installing
WPSupportTool-x86.msi (32 bit) successfuly
trying to run update.bat either in adminstrator or via the command prompt in dos i still keep getting the URI error
Error: System.UriFormatException: INvalid URI: The format of the URI could not be determined.
at wm7update.Program.UpdateDevice(IDeviceInfo device infor, List '1 updates, update type )
at wm7update.program.main(string[] args>
The above error message is in red at the beginning. update. bat will let me back up to premango state but it has this error message at the top. when it runs zune i click phone update it says i have the current version 7.0 (7390)
Does anyone have any light to shed on this? if you know the answer please let me know. I am frustrated and new to wp7. I used to back in the day flash cabs all day long on HTC wizzard, 8525 exc... I am just stuck on this. I have tried to read and search forum but have not seen an answer to this specific question..
Thank you,
-Strap!
okay nevermind I am a Moron..
I was running the Update.bat from win rar got error
I copied the file in a folder and opened it dragged update.bat on desktop ran it in administrator 2nd fail (aka moron)
I extracted everything (like i should have instead of being a moron) in its own folder ran update.bat as admin and I am now 22% complete backing up phone with no errors.. will see if i get Mango running soon..
Sorry for wasting anyones time
-Strap = Moron
running Mango Baby!!!!
Syncing zune mango beta now thank you all!!!
Hello,
First, sorry if I put this in the wrong section but I have searched and cant seem to find an answer anywhere else.
Is anyone else having a problem getting QXDM to start up? I have had it on my computer for about 3-4 months now and have used it a few times (Last time I remember for sure using it was about 3 weeks ago) I tried to use it today and I get an error after the little QXDM box pops up in the middle of my screen now. The error reads "Error initializing DIAG server" I tried uninstalling the program and re-installing but that does not help either. I am pretty sure it is version 3.09.19, is it maybe an old outdated version now?? Does anyone have a link to a newer one if that is the case? I just can't think of anything I have done to my computer recently that would have caused this problem? Does know what caused this and can help me fix it please?
Thanks in advance guys, you rock! I have learned alot from here but I am still a little bit of a noob so please do not laugh
****NEVERMIND*****
A member already helped me
How did you manage to bypass the error?
PM me and I will help you if you still need it
Hello, I'm new to this site. I recently Bricked my phone and restored using the Lgnpst and now i'm at 000-000-0000... i've read just about every forum and have installed QPST and QXDM. when I try to run QXMD i get the DIAG Server Error.. I see someone has figured a way around this issue.. If you can help me I'd greatly appreciate it..
can you please let me know how to bypass this problem?
Check your pm alot of times running as administrator will solve the problem
I am having the same issue.
"Error initializing DIAG server"
Thanks for anyone who can help me with this.
im also having this problem. can anyone help
***update: running as administrator helped me
If that would only work for me Id be in business, but it does not work for me. still looking for a solution.
Got it finally... for some reason QPST needs to be installed in the Qualcomm directory also on my pc. But I got it working now.
Thanks to my new found buddy Klown80 got it working.
i am getting the same error i already zero'd my phone and now when i try to open qxdm it gives me that error "Error initializing DIAG sever":crying: i already tired running with admin right and compatibility mode win xp serv pk 3 and just regular win 7
I am trying to use QXDM to repair my cell phone. I jut reinstalled it today and when I try to run it I get this message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item". I am the admin on my computer and have also tried to run the program as admin but still get the same message. Any help would be greatly appreciated. Thank you.
<Reformated my computer lastnight and it seemed to fix the problem.>
Copy Bin to Desktop and try again
piglet2009 said:
i am getting the same error i already zero'd my phone and now when i try to open qxdm it gives me that error "Error initializing DIAG sever":crying: i already tired running with admin right and compatibility mode win xp serv pk 3 and just regular win 7
Click to expand...
Click to collapse
Copy the BIN folder from the QXDM to the desktop and try opening that from there.
Error initialising DIAG server
I am also facing the same problem while launching the QXDM tool.
when small pop window of QXDM appears after that i get the error as Error initialising the DIAG server
If u r able to fix your problem can u please tell me what is the problem and what should i do to fix it.
same problem... all i want is to change the esn of my droid x back to what it was before my friend effed it up... *sigh* qxdm says "error initializing diag server" and qpst says "could not find the qpst server 'mycomputer', HR = 0x80004002" ... all i want is to fix this dang phone!! it was soo easy last time QPST and QXDM worked right away with no problems
QXDM - failed to initialize diag server
Hi all
New to this group. can anyone help me out with problem of starting qxdm on my windows 7 ( 32 bit)- i am getting an error - failed to initialize diag server , i am using administrator and also the qpst is loaded in the folder qualcomm
version of qxdm - 3.14.634
version of qpst - 2.7.366
Thanx in advance
Help please!
Hi all, guys i am getting the "error initializing the DIAG server" message
I could not find a solution anywhere.
I tried running as an administrator and moving bin folder to desktop. any other idea??
thanks in advance
Hello i got the smaeerror ... tried allready all ...but QXDM wants start!
how to fix it?
Klown80 said:
Check your pm alot of times running as administrator will solve the problem
Click to expand...
Click to collapse
Running as administrator actually giving the problem. If i click it straight way, it opens but fields are greyed out in NV browser.
kkoolkaran said:
Running as administrator actually giving the problem. If i click it straight way, it opens but fields are greyed out in NV browser.
Click to expand...
Click to collapse
Managed to run QXDM without administrator privileges and get the fields in NV browser to become editable, provided that QPST has connected to the target port (not port that keeps switching and cause phone to reboot repetitively. This previous condition was fixed by flashing another Android 4.1.2-based ROM over the previous 2.3.5-based ROM). Learnt that the editable value in "Input" column becomes editable with a 3-click command from mouse.
I am facing issue with I can try qxdm installation but once running it, it is showing qxdm tool is already installed. If u know any one please help me quickly and ASAP.
TL : DR Bought phone today, spent 10+hrs now trying to get this thing rooted, help
Read through the ENTIRE Bounty thread for D6616: http://forum.xda-developers.com/z3/general/bounty-z3-d6616-root-t3035129/page49
Followed all instructions to the best of my understanding, got close once, tried to find out what was wrong, messed it up even worse, have no idea what I'm doing...
Could I get a little help with what I'm missing here?
I have installed on my Windows 7 Ultimate Service Pack 1 PC:
JDK 8 Update 45 (64-bit)
JDK 8 Update 45
JRE 8 Update 45 (64-bit)
JRE 8 Update 45
C++ 2012 Redistributable (x64)
C++ 2012 Redistributable (x86)
Android Studio
SDK Manager
Universal Adb Driver
Minimal ADB and Fastboot
Sony Companion
Avast Antivirus Disabled
On my D6616 phone I have:
Android Version 4.4.4
Version 23.0.D.1.123
Developer Mode access
USB Debugging activated
Allow Mock Locations checked
TestApp2 Selected for Debug App
Verify apps over USB Unchecked
Lookout Disabled
Running exploit.bat still says "waiting for the device to be connected"
Restarting my computer and then running exploit.bat will allow it to get a step farther, saying something about the daemon not being started, then it starts on port something.
After that it doesn't do anything.
Hitting Ctrl+C prompts the user to terminate or not, selecting no returns this:
Pushing files
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
Preparing exploit...
and then it does nothing.
Earlier today I got it to actually do something. Exploit.bat ran it's code until it said Success, then I ran root.bat until it stopped at the error message given in the video link in the OP.
Please help me figure out what's wrong. I've spent 12+hrs straight now trying to figure this out, installing, uninstalling, re-installing, etc etc, I've skipped work, Martial Arts training, ignored my girlfriend, and haven't eaten anything since I bought the phone after breakfast (its 11pm here now), I haven't even mentioned the nightmare I had to go through with the T-Mobile Store just to actually purchase the phone. I can't think of any other relevant information to provide, but if I've missed something let me know. Please, help! What do I need to do root my phone?
Hi, thank you for using XDA Assist. Our mission here is to point you in the right direction. We are not a technical support center and I see you're asking here, http://forum.xda-developers.com/z3/general/bounty-z3-d6616-root-t3035129 That is the best place as they are the experts on your device.
Please post your question only once per the XDA rules. I'm going to close this thread as you are already asking in the right place above.