Related
Good Morning,
After flashing the Gingerbread Baseband I no longer am able to register on the network for my provider.
The device is from Rogers but unlocked and being used on the Bell network.
After flashing I realized there may be a different baseband for me to use in Canada (just North of Toronto).
I require some help in locating a Gingerbread baseband that would work or provide me with instructions on how to return to the original baseband.
Any help is appreciated!
Thank you kindly,
- Audi2Audi
Did you set the APN manually? You have to do that.
Hello!
APN in Menu|Settings|Wireless & Networks|Mobile Networks|Access Point Names ?
I have set that to: pda.bell.ca
Is there other steps required though?
Thank you for the response!
apn settings is for internet. phone must tower of sim. may be flashing baseband again will soveit because i am tower getting for my country
If you're wanting to go back to stock froyo first you need to visit here to get your original rom... these will also flash the baseband back too
http://forum.xda-developers.com/showthread.php?t=1246678
or here http://forum.xda-developers.com/showthread.php?t=1155874
then you will need to follow this turtorial in order to flash the stock rom back on (go down to second post that one is in English )
http://forum.xda-developers.com/showthread.php?t=1244490
Although it is a possibility that the BB hasn't flashed correctly, might be worth trying it again... might also be worth trying a froyo rom to see if you get a signal then, because if you do you still have the froyo baseband on...
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
adixtra said:
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
Click to expand...
Click to collapse
Thanks adixtra i always forget about the tutorial of yours
You can flash a .Bin File for Your P920 or P920H.
Ok, now this is getting bizarre hah.
I reflashed the baseband again and everything went normal as it did before.
This time I searched for networks and selected my provider. After about 5 minutes of the device trying to register on the network an error was received that said it was unable to register on this network.
However, when I got to my home screen I was registered on the network. I tested a voice call and it worked. I have tested data as well.
BUT! This is where it gets even more bizarre...The device cycles from 4 signal bars to 2 signal bars to none to 3G (from H) followed by not being registered on the network. Then a few minutes later (sometimes only after a reboot) it returns to 4 bars and begins the cycle again.
Has anyone seen anything like this before?
Thank you again for your help!
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
teray0n said:
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
Click to expand...
Click to collapse
Good Evening,
Would you be able to upload the KDZ file from your update?
I am having problems with the LG Phone Recovery indicating that I have the most up to date software and halting the recovery process.
Thank you!
- Audi2Audi
Hello,
I flashed an earlier KDZ which allowed me to use the LG Update tool to restore my stock rom.
Thank you everyone for your help and advice.
- Audi2Audi.
it will tell you that but if you use recovery mode and it will download the file then you will have to unplug the phone from usb hold vol+ power then plug it back into the usb and it should download. like i said i used similiar method to flashing baseband
On my windows 7 not detect omap 4 and i can't flash baseband,what can i do?
Hello guys.
I have a xperia Z3 from VIVO and flashed a rom from OI, everything went well on flashing the rom but after it finished i noticed that i lost my 4G. When i search for network there have a TIM BRASIL LTE but it won't let me register on it.
Do anyone know how to solve that?
Thanks!
Input the correct apn settings from your carrier
LitoNi said:
Input the correct apn settings from your carrier
Click to expand...
Click to collapse
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Info
DiegoManBR said:
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Click to expand...
Click to collapse
just test firmware of another region
(UK firmware for example)
:good:
DiegoManBR said:
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Click to expand...
Click to collapse
Maybe if you explained a bit better that would?
Like mentioned before this post, try to flash only the baseband from another region, hopefully that will solve it.
Geeks Empire said:
just test firmware of another region
(UK firmware for example)
:good:
Click to expand...
Click to collapse
Geeks, there have no other region for my version of the Z3, also i am trying to flash many other rooms from my region and all of them results in a error during the flash... Blank error, no description.
LitoNi said:
Maybe if you explained a bit better that would?
Like mentioned before this post, try to flash only the baseband from another region, hopefully that will solve it.
Click to expand...
Click to collapse
Lito, thanks for the sugestion, i flashed the baseband for the Customized PT and after flash i got the 4G signal for about 30 minutes, but when i rebooted the phone, i completelly lost 4G again, and now in the network lists there is no LTE from TIM. Could it be because i installed an european baseband on a mobile here in brazil?
Thanks agian.
DiegoManBR said:
Lito, thanks for the sugestion, i flashed the baseband for the Customized PT and after flash i got the 4G signal for about 30 minutes, but when i rebooted the phone, i completelly lost 4G again, and now in the network lists there is no LTE from TIM. Could it be because i installed an european baseband on a mobile here in brazil?
Thanks agian.
Click to expand...
Click to collapse
thats weird... are you sure you have the correct APN settings inputted? Also, i would assume youve tried flashing the VIVO's baseband or any other USA roms?
Try the following if you have already done all those: go to dial pad and input *#*#4636#*#* > phone info > menu top right > select radio band > try Australia or USA or what ever pops up > scroll down and make sure LTE/GSM auto is selected or try out the other ones > scroll back up and hit the "run ping test"
if all these doesnt work, i would advise you to go back to the original rom.
just curious, which model number is your Z3?
LitoNi said:
thats weird... are you sure you have the correct APN settings inputted? Also, i would assume youve tried flashing the VIVO's baseband or any other USA roms?
Try the following if you have already done all those: go to dial pad and input *#*#4636#*#* > phone info > menu top right > select radio band > try Australia or USA or what ever pops up > scroll down and make sure LTE/GSM auto is selected or try out the other ones > scroll back up and hit the "run ping test"
if all these doesnt work, i would advise you to go back to the original rom.
just curious, which model number is your Z3?
Click to expand...
Click to collapse
Lito, now i will complicate a little bit more then. First, the model number of my mobile is D6646 from Brazil with DTV.
Also, i tried to flash the Vivo Baseband and it was worse, i did not install any baseband from USA, just from Portugal.
I tried that on the keyboard, but when i chose USA band i just can't even register on any TIM network.
Also, i tried to flash the original rom, but i can't flash any other firmware apart from Oi. I get a blank error line on flashtool for every other rom i tried to install, so it's even worse
Feel the challenge.
Thanks again for all your help.
flash back to the original ROM if you can, also, how did you flash to the new rom? through recovery or Flashtool? if you see a blank space or what ever, you might not have the correct drivers installed on your computer, especially if youre running Windows 8.
that being said, i dont see D6646 in Xperifirm, i cant tell you what to flash and what not to flash. Without that, i wouldnt advise you to flash anything but the original rom that it came with, you dont want to soft/hard brick the device.
LitoNi said:
flash back to the original ROM if you can, also, how did you flash to the new rom? through recovery or Flashtool? if you see a blank space or what ever, you might not have the correct drivers installed on your computer, especially if youre running Windows 8.
that being said, i dont see D6646 in Xperifirm, i cant tell you what to flash and what not to flash. Without that, i wouldnt advise you to flash anything but the original rom that it came with, you dont want to soft/hard brick the device.
Click to expand...
Click to collapse
Lito, I tryied to flash the original room, I am using XperiaFirm to download the firmware and flashtool to flash. I can flash the Oi room, but i can't flash the vivo BR, the Claro Argentina, or the Customized PT, all of them results in a blank error, it's not drivers problems, since i can install the Oi firmware and also i disabled the signature on windows in order to install.
Anyway, i solved the problem in order to show another problem. Here is the situation:
I created another APN to use when i don't want to use internet because even with data package disabled my mobile send data to the carrier that charges me, when i deleted that APN the 4G worked perfectly, but now my carrier is charging me the data . Any idea how to block this data comsumption?
Thanks again.
DiegoManBR said:
Lito, I tryied to flash the original room, I am using XperiaFirm to download the firmware and flashtool to flash. I can flash the Oi room, but i can't flash the vivo BR, the Claro Argentina, or the Customized PT, all of them results in a blank error, it's not drivers problems, since i can install the Oi firmware and also i disabled the signature on windows in order to install.
Anyway, i solved the problem in order to show another problem. Here is the situation:
I created another APN to use when i don't want to use internet because even with data package disabled my mobile send data to the carrier that charges me, when i deleted that APN the 4G worked perfectly, but now my carrier is charging me the data . Any idea how to block this data comsumption?
Thanks again.
Click to expand...
Click to collapse
that is extremely weird, never had such issues with any of my android phones. make sure data roaming is not on, the carrier shouldnt be able to charge you if you disabled data
Also, make sure the FTF files youve made with xperifirm and flashtool are correct, like not including the TA files etc..., i would advise you redownload those FTF files and try again, also make sure you have the latest flashtool available.
at this point, you are probably better seeking for a developer or someone who can read codes, make a logcat and see if the flashtool thread is available and ask there. Aside from the FTF files, you are better off asking the carrier why they are still able to charge you in such way. Sorry man, this is as far I can aid you in this matter. GL bud!
I have the virgin mobile variant of the moto g3.
I was able to unlock boot loader, install twrp, and flashed cm.
Everything went well, except I lost service. I restored my backup and all seemed good, but ended up phone calls were not working. Long story, but Ended up flashing factory image and everything is back up and normal. So at least we can always restore, that's good news!
Question is, has anyone else with virgin mobile flashed a ROM yet?
hossman said:
I have the virgin mobile variant of the moto g3.
I was able to unlock boot loader, install twrp, and flashed cm.
Everything went well, except I lost service. I restored my backup and all seemed good, but ended up phone calls were not working. Long story, but Ended up flashing factory image and everything is back up and normal. So at least we can always restore, that's good news!
Question is, has anyone else with virgin mobile flashed a ROM yet?
Click to expand...
Click to collapse
I am getting my VM variant this Tuesday. Im so excited to hear that you were able to unlock the bootloader. I wasnt sure it would be possible. I take it you were also able to root as well?
As for your question I think the reason you were getting no service is because there are currently no Roms for the CMDA variants *YET*, only for the GSM variants. If you look at this post someone has requested certain information and he said it should be easy enough to get cyanogen to work on the VM variant.
Again I am so glad to hear about unlocking the bootloader. How were you able to do it? I looked at the list on Motorola's website and it seemed as unlocking was only for the gsm variant. Thank you
EDIT: PS this user also has the same results as you.
I used motos website to unlock bootloader, it was very simple.
And yes rooted by flashing SuperSU in recovery.
I will check out the posts you linked later today.
This phone is very nice BTW!
I have posted the info requested
hossman said:
I have posted the info requested
Click to expand...
Click to collapse
Thank you very much.
Sent from my Virgin Mobile HTC Desire 601 zaraCL cdma
I don't think it'll be long before a working cm rom.
I have LTE service but the phone is messed up.
http://forum.xda-developers.com/showthread.php?p=63517757
[Q&A] [ROM][osprey] CyanogenMod for Moto G (3rd Gen)
Also our model is listed on cm
http://www.cyanogenmodroms.com/2015/09/cyanogenmod-rom-motorola-moto-g-2015.html?m=1
hossman said:
Also our model is listed on cm
http://www.cyanogenmodroms.com/2015/09/cyanogenmod-rom-motorola-moto-g-2015.html?m=1
Click to expand...
Click to collapse
Nice, its official. Just got mine in the mail today. Its charging now before I unlock bootloader and root.
hossman said:
I have the virgin mobile variant of the moto g3.
I was able to unlock boot loader, install twrp, and flashed cm.
Everything went well, except I lost service. I restored my backup and all seemed good, but ended up phone calls were not working. Long story, but Ended up flashing factory image and everything is back up and normal. So at least we can always restore, that's good news!
Question is, has anyone else with virgin mobile flashed a ROM yet?
Click to expand...
Click to collapse
Hoss where did you get the factory image?
Sent from my Virgin Mobile CDMA Moto G3
http://forum.xda-developers.com/showthread.php?t=3169639
hossman said:
http://forum.xda-developers.com/showthread.php?t=3169639
Click to expand...
Click to collapse
Oh I know about this thread. Did you flash the Sprint version? You have Virgin Mobile right? I wasn't sure if we could flash the Sprint version.
Edit: Oh OK so it is the Sprint one we flash. Awesome
Sent from my Virgin Mobile CDMA Moto G3
Hedied4me said:
Oh I know about this thread. Did you flash the Sprint version? You have Virgin Mobile right? I wasn't sure if we could flash the Sprint version.
Edit: Oh OK so it is the Sprint one we flash. Awesome
Sent from my Virgin Mobile CDMA Moto G3
Click to expand...
Click to collapse
Virgin is a virtual operator that resells Sprint, at least in the US.
Sent from my SM-T530NU using Tapatalk
Yes I am on virgin and I flashed sprint and all went well.
Thank you both.
Sent from my Virgin Mobile CDMA Moto G3
Does gsm will work on xt1548?
Hey all.
I've been reading, researching, and trying for days to flash osprey v3.0.0 TWRP. Still no luck.
My PC (Win 8.1) will not recognize the phone when plugged in via fast boot mode. Powered on, it's fine.
The Moto drivers are installed, minimal ADB, and phone settings are correct. Do I need the "full version" of the SDK suite?
Can someone go into detail or a direct topic link on how do get this done successfully and what you did?
After this is in place, I'll be golden
This is the VM version. Still on Lolipop.
Thanks so much!
So is CM working yet? I'm thinking about picking up this VM version tomorrow.
bjzapp said:
Hey all.
I've been reading, researching, and trying for days to flash osprey v3.0.0 TWRP. Still no luck.
My PC (Win 8.1) will not recognize the phone when plugged in via fast boot mode. Powered on, it's fine.
The Moto drivers are installed, minimal ADB, and phone settings are correct. Do I need the "full version" of the SDK suite?
Can someone go into detail or a direct topic link on how do get this done successfully and what you did?
After this is in place, I'll be golden
This is the VM version. Still on Lolipop.
Thanks so much!
Click to expand...
Click to collapse
Bump for HELP to my above post/issue please!
bjzapp said:
Bump for HELP to my above post/issue please!
Click to expand...
Click to collapse
BUMP....
Still patiently awaiting help/suggestion/solution for this above question... I'm stuck until I can get past this point! (
If you get the Data Done Right version of the XT1548 from Walmart, then you will have data issues with all custom ROMs. Apply the APN settings from my post here: http://forum.xda-developers.com/showpost.php?p=65987522&postcount=1254 to fix data issues with the Data Done Right variant. Hopefully the APN is merged in with later builds of CM13 so we won't have to manually enter the info in after every flash.
@bjzapp Follow the tutorial in this video: https://www.youtube.com/watch?v=NHbbWE2hsgU
Download the latest version of the TWRP recovery though. Also, after you get a successful recovery flash via fastboot, do not restart the phone. Instead, boot straight into the recovery from the bootloader on the phone. If you don't do this, the recovery will get overwritten with the stock recovery after you reboot.
Ok weird issue, on stock 6045I MM sim worked fine, used eluga switch to downgrade to LP sim recognized voice working no data, unlocked bootloader, flashed TWRP installed @The Marionette MM v1 rom then reset, then rooted.... sim not detected,tried brothers sim not detected, tried sons not detected.... reset again still no detection, used mobil upgrade Q back to stock MM, sim not detected, mobil upgrade Q does a complete restore correct?? Is it normal to see 2 IMEI #s on stock 6045I?? Because sim still not detected so back to eluga switch sim is detected again, I guess I will try another rom, but can anyone think of any issues.... I would say bad sim or sim port but it worked fine and kinda works with eluga rom(data may be a radio issue??) Im stumped here.... FYI US based carrier (Cricket(AT&T))
Update: finally able to see the sim in stock MM, but not LTE. Have tried everything I can think of. Something just gets broken with LTE, that does not come back after using Eluga Switch downgrade. I would think that Mobile upgrade Q would fix everything back to normal, but even after 4 runs of Q, back to back still can't get LTE...... Going to settle for HSPA, I guess.....
Apparently solution here!!
http://forum.xda-developers.com/idol-3/help/warning-eluga-switch-rom-disables-s-lte-t3470543/page1
And it's fixed!! Anyone who has had problems after Eluga Switch downgrade check out the link above!!
help
good afternoon friend. I have exactly the same problem as tapeworms, but I could not complete the tutorial you put in the link. could help me how to use that fastboot flash fsg fsg.img? Eluga already back but can not use fastboot. Thanks in advance
henalmeida said:
good afternoon friend. I have exactly the same problem as tapeworms, but I could not complete the tutorial you put in the link. could help me how to use that fastboot flash fsg fsg.img? Eluga already back but can not use fastboot. Thanks in advance
Click to expand...
Click to collapse
Read up here...
http://forum.xda-developers.com/ido...de-mm-to-install-custom-t3475961/post69028659
Is this will be ok?, because Xperia 5 have 128GB and AU version have 64GB.
anyone have tried it?
Please don't flash if yours is a different model as it may break your phone. Only of the same specs model.
autobanned said:
Is this will be ok?, because Xperia 5 have 128GB and AU version have 64GB.
anyone have tried it?
Click to expand...
Click to collapse
when I hear the word AU,I think that you are from indonesia tercinta merdekalah katanya
Huh. Please don't attempt to do it. My Xperia 5 bricked after doing it. And since the phone had some USB issues, getting into flash mode again was very difficult and consumed around 2 hours fiddling with the volume keys. Because the red light just blinks every 2 seconds or so. No green light after connecting USB while pressing volume down. Finally when I got it in flash mode, flashed the SOV41 AU version which brought the device back to life.
No harm in trying it (in my experience). Just give it a try and if it (bricks) doesn't boot, force shut it down, put it in flash mode, and reflash the original ROM with NewFlasher, (Don't use FlashTool) and boom, back to working again.
Edit: why have I just replied to an almost 3 year old thread at 00:53 in the morning... Good damn it lol.
ROMs that I tried but failed :
SO-01M NTT DOCOMO JP - Signature error, not even flashed.
J8210 Customized UK - Bricked
901SO SoftBank JP - Bricked
All I was trying for to use 4G network as Jio Sim works only in 4G. Even though a toggle was available in the AU version to enable 4G, it didn't worked. It can't even connect to network by manually selecting. And 4636 method don't work.
Arjun Krishna (MASTER-V) said:
ROMs that I tried but failed :
SO-01M NTT DOCOMO JP - Signature error, not even flashed.
J8210 Customized UK - Bricked
901SO SoftBank JP - Bricked
All I was trying for to use 4G network as Jio Sim works only in 4G. Even though a toggle was available in the AU version to enable 4G, it didn't worked. It can't even connect to network by manually selecting. And 4636 method don't work.
Click to expand...
Click to collapse
Replace AU oem files with attached files. Flash with new flasher. Probably no AU messaging app after flash. so you need to install either google messages or use attached au original message app apk.
engage4 said:
Replace AU oem files with attached files. Flash with new flasher. Probably no AU messaging app after flash. so you need to install either google messages or use attached au original message app apk.
Click to expand...
Click to collapse
Great. It worked. Also bloatware removed. More like a Global ROM with VoLTE.
i tried to flash global firmwares on my xperia 5ii softbank, but there is not network. Tried flashing AOSP roms, still no network. Anyway to get out of this japanese rom. I tried replacing the OEM files, still no luck.
msafeerp said:
i tried to flash global firmwares on my xperia 5ii softbank, but there is not network. Tried flashing AOSP roms, still no network. Anyway to get out of this japanese rom. I tried replacing the OEM files, still no luck.
Click to expand...
Click to collapse
you need to create APN, bro
alvathoni said:
you need to create APN, bro
Click to expand...
Click to collapse
Does it works?