Hello guys.
I have a xperia Z3 from VIVO and flashed a rom from OI, everything went well on flashing the rom but after it finished i noticed that i lost my 4G. When i search for network there have a TIM BRASIL LTE but it won't let me register on it.
Do anyone know how to solve that?
Thanks!
Input the correct apn settings from your carrier
LitoNi said:
Input the correct apn settings from your carrier
Click to expand...
Click to collapse
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Info
DiegoManBR said:
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Click to expand...
Click to collapse
just test firmware of another region
(UK firmware for example)
:good:
DiegoManBR said:
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Click to expand...
Click to collapse
Maybe if you explained a bit better that would?
Like mentioned before this post, try to flash only the baseband from another region, hopefully that will solve it.
Geeks Empire said:
just test firmware of another region
(UK firmware for example)
:good:
Click to expand...
Click to collapse
Geeks, there have no other region for my version of the Z3, also i am trying to flash many other rooms from my region and all of them results in a error during the flash... Blank error, no description.
LitoNi said:
Maybe if you explained a bit better that would?
Like mentioned before this post, try to flash only the baseband from another region, hopefully that will solve it.
Click to expand...
Click to collapse
Lito, thanks for the sugestion, i flashed the baseband for the Customized PT and after flash i got the 4G signal for about 30 minutes, but when i rebooted the phone, i completelly lost 4G again, and now in the network lists there is no LTE from TIM. Could it be because i installed an european baseband on a mobile here in brazil?
Thanks agian.
DiegoManBR said:
Lito, thanks for the sugestion, i flashed the baseband for the Customized PT and after flash i got the 4G signal for about 30 minutes, but when i rebooted the phone, i completelly lost 4G again, and now in the network lists there is no LTE from TIM. Could it be because i installed an european baseband on a mobile here in brazil?
Thanks agian.
Click to expand...
Click to collapse
thats weird... are you sure you have the correct APN settings inputted? Also, i would assume youve tried flashing the VIVO's baseband or any other USA roms?
Try the following if you have already done all those: go to dial pad and input *#*#4636#*#* > phone info > menu top right > select radio band > try Australia or USA or what ever pops up > scroll down and make sure LTE/GSM auto is selected or try out the other ones > scroll back up and hit the "run ping test"
if all these doesnt work, i would advise you to go back to the original rom.
just curious, which model number is your Z3?
LitoNi said:
thats weird... are you sure you have the correct APN settings inputted? Also, i would assume youve tried flashing the VIVO's baseband or any other USA roms?
Try the following if you have already done all those: go to dial pad and input *#*#4636#*#* > phone info > menu top right > select radio band > try Australia or USA or what ever pops up > scroll down and make sure LTE/GSM auto is selected or try out the other ones > scroll back up and hit the "run ping test"
if all these doesnt work, i would advise you to go back to the original rom.
just curious, which model number is your Z3?
Click to expand...
Click to collapse
Lito, now i will complicate a little bit more then. First, the model number of my mobile is D6646 from Brazil with DTV.
Also, i tried to flash the Vivo Baseband and it was worse, i did not install any baseband from USA, just from Portugal.
I tried that on the keyboard, but when i chose USA band i just can't even register on any TIM network.
Also, i tried to flash the original rom, but i can't flash any other firmware apart from Oi. I get a blank error line on flashtool for every other rom i tried to install, so it's even worse
Feel the challenge.
Thanks again for all your help.
flash back to the original ROM if you can, also, how did you flash to the new rom? through recovery or Flashtool? if you see a blank space or what ever, you might not have the correct drivers installed on your computer, especially if youre running Windows 8.
that being said, i dont see D6646 in Xperifirm, i cant tell you what to flash and what not to flash. Without that, i wouldnt advise you to flash anything but the original rom that it came with, you dont want to soft/hard brick the device.
LitoNi said:
flash back to the original ROM if you can, also, how did you flash to the new rom? through recovery or Flashtool? if you see a blank space or what ever, you might not have the correct drivers installed on your computer, especially if youre running Windows 8.
that being said, i dont see D6646 in Xperifirm, i cant tell you what to flash and what not to flash. Without that, i wouldnt advise you to flash anything but the original rom that it came with, you dont want to soft/hard brick the device.
Click to expand...
Click to collapse
Lito, I tryied to flash the original room, I am using XperiaFirm to download the firmware and flashtool to flash. I can flash the Oi room, but i can't flash the vivo BR, the Claro Argentina, or the Customized PT, all of them results in a blank error, it's not drivers problems, since i can install the Oi firmware and also i disabled the signature on windows in order to install.
Anyway, i solved the problem in order to show another problem. Here is the situation:
I created another APN to use when i don't want to use internet because even with data package disabled my mobile send data to the carrier that charges me, when i deleted that APN the 4G worked perfectly, but now my carrier is charging me the data . Any idea how to block this data comsumption?
Thanks again.
DiegoManBR said:
Lito, I tryied to flash the original room, I am using XperiaFirm to download the firmware and flashtool to flash. I can flash the Oi room, but i can't flash the vivo BR, the Claro Argentina, or the Customized PT, all of them results in a blank error, it's not drivers problems, since i can install the Oi firmware and also i disabled the signature on windows in order to install.
Anyway, i solved the problem in order to show another problem. Here is the situation:
I created another APN to use when i don't want to use internet because even with data package disabled my mobile send data to the carrier that charges me, when i deleted that APN the 4G worked perfectly, but now my carrier is charging me the data . Any idea how to block this data comsumption?
Thanks again.
Click to expand...
Click to collapse
that is extremely weird, never had such issues with any of my android phones. make sure data roaming is not on, the carrier shouldnt be able to charge you if you disabled data
Also, make sure the FTF files youve made with xperifirm and flashtool are correct, like not including the TA files etc..., i would advise you redownload those FTF files and try again, also make sure you have the latest flashtool available.
at this point, you are probably better seeking for a developer or someone who can read codes, make a logcat and see if the flashtool thread is available and ask there. Aside from the FTF files, you are better off asking the carrier why they are still able to charge you in such way. Sorry man, this is as far I can aid you in this matter. GL bud!
Related
Good Morning,
After flashing the Gingerbread Baseband I no longer am able to register on the network for my provider.
The device is from Rogers but unlocked and being used on the Bell network.
After flashing I realized there may be a different baseband for me to use in Canada (just North of Toronto).
I require some help in locating a Gingerbread baseband that would work or provide me with instructions on how to return to the original baseband.
Any help is appreciated!
Thank you kindly,
- Audi2Audi
Did you set the APN manually? You have to do that.
Hello!
APN in Menu|Settings|Wireless & Networks|Mobile Networks|Access Point Names ?
I have set that to: pda.bell.ca
Is there other steps required though?
Thank you for the response!
apn settings is for internet. phone must tower of sim. may be flashing baseband again will soveit because i am tower getting for my country
If you're wanting to go back to stock froyo first you need to visit here to get your original rom... these will also flash the baseband back too
http://forum.xda-developers.com/showthread.php?t=1246678
or here http://forum.xda-developers.com/showthread.php?t=1155874
then you will need to follow this turtorial in order to flash the stock rom back on (go down to second post that one is in English )
http://forum.xda-developers.com/showthread.php?t=1244490
Although it is a possibility that the BB hasn't flashed correctly, might be worth trying it again... might also be worth trying a froyo rom to see if you get a signal then, because if you do you still have the froyo baseband on...
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
adixtra said:
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
Click to expand...
Click to collapse
Thanks adixtra i always forget about the tutorial of yours
You can flash a .Bin File for Your P920 or P920H.
Ok, now this is getting bizarre hah.
I reflashed the baseband again and everything went normal as it did before.
This time I searched for networks and selected my provider. After about 5 minutes of the device trying to register on the network an error was received that said it was unable to register on this network.
However, when I got to my home screen I was registered on the network. I tested a voice call and it worked. I have tested data as well.
BUT! This is where it gets even more bizarre...The device cycles from 4 signal bars to 2 signal bars to none to 3G (from H) followed by not being registered on the network. Then a few minutes later (sometimes only after a reboot) it returns to 4 bars and begins the cycle again.
Has anyone seen anything like this before?
Thank you again for your help!
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
teray0n said:
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
Click to expand...
Click to collapse
Good Evening,
Would you be able to upload the KDZ file from your update?
I am having problems with the LG Phone Recovery indicating that I have the most up to date software and halting the recovery process.
Thank you!
- Audi2Audi
Hello,
I flashed an earlier KDZ which allowed me to use the LG Update tool to restore my stock rom.
Thank you everyone for your help and advice.
- Audi2Audi.
it will tell you that but if you use recovery mode and it will download the file then you will have to unplug the phone from usb hold vol+ power then plug it back into the usb and it should download. like i said i used similiar method to flashing baseband
On my windows 7 not detect omap 4 and i can't flash baseband,what can i do?
Hi
Does anyone have stock firmware for Huawei E5776 in English please.
My E5776 was showing NO SERVICE after unlocking from EE no matter which SIM I used so I updated it to a newer firmware version but that turned out to be some Russian network's firmware and moreover its in Russian language.
Is there anyway that I can revert back to the old EE firmware in English or update it to stock firmware if available.
Thanks
S Ali
s.ali said:
Hi
Does anyone have stock firmware for Huawei E5776 in English please.
My E5776 was showing NO SERVICE after unlocking from EE no matter which SIM I used so I updated it to a newer firmware version but that turned out to be some Russian network's firmware and moreover its in Russian language.
Is there anyway that I can revert back to the old EE firmware in English or update it to stock firmware if available.
Thanks
S Ali
Click to expand...
Click to collapse
I have the same request.
I buyed my Huawei to ebay from UK but unfortually the modem wasn't a stock firmware but EE mobile firmware.
My modem is unsimlocked but I need stock firmware also because the modem is in roaming because I use it in France with Bouygues Telecom operator.
I use correct APN but WAN refuse to connect...
zeltron said:
I have the same request.
I buyed my Huawei to ebay from UK but unfortually the modem wasn't a stock firmware but EE mobile firmware.
My modem is unsimlocked but I need stock firmware also because the modem is in roaming because I use it in France with Bouygues Telecom operator.
I use correct APN but WAN refuse to connect...
Click to expand...
Click to collapse
Got the same one with EE firmware, it reports that it's in roaming, but after setting up APN and connecting manually (or marking the connect in roaming checkbox) it works fine.
But I'm also interested in getting the stock (or other than EE and english) firmware.
Someone tried german updater?
m axwireless.de/2013/firmware-update-fuer-huawei-e5776-verfuegbar/
h uaweidevices.de/e5776?show=downloads
urban69 said:
Got the same one with EE firmware, it reports that it's in roaming, but after setting up APN and connecting manually (or marking the connect in roaming checkbox) it works fine.
But I'm also interested in getting the stock (or other than EE and english) firmware.
Click to expand...
Click to collapse
Same for me, but we cannot use roaming protection in our country...
Found stock firmware/dashboard for my E5776 from ee.co.uk!
And it's working fine - here's a screenshot which proves that:
View attachment 2446923
It's on german huawei site: http://huaweidevices.de/e5776?show=downloads but it's multi-language!
There's also pdf with instructions - first need to install the Update_UT* (drivers) and then the e5776_Update*.
If it asks for flash code, you can generate it here: http://www.modemunlock.com/huawei.php
urban69 said:
Found stock firmware/dashboard for my E5776 from ee.co.uk!
And it's working fine - here's a screenshot which proves that:
View attachment 2446923
It's on german huawei site: http://huaweidevices.de/e5776?show=downloads but it's multi-language!
There's also pdf with instructions - first need to install the Update_UT* (drivers) and then the e5776_Update*.
If it asks for flash code, you can generate it here: http://www.modemunlock.com/huawei.php
Click to expand...
Click to collapse
Can you guide me through this step by step? I can't read german and not sure what files to download or what to do. Thanks
firmware / version
hi
is this firmware compatible with all versions of e5776? mine is e5776s-32...
really hope so
Yes, it is
Hi,
Yes, I have just updated mine which was an EE branded, all is well happily connected to three using the stock firmware.
If yours is an EE one too then don't forget to get the firmware update password from that site in the post mentioned earlier.
danielhvf said:
hi
is this firmware compatible with all versions of e5776? mine is e5776s-32...
really hope so
Click to expand...
Click to collapse
bvoros said:
Hi,
Yes, I have just updated mine which was an EE branded, all is well happily connected to three using the stock firmware.
If yours is an EE one too then don't forget to get the firmware update password from that site in the post mentioned earlier.
Click to expand...
Click to collapse
what's EE? an network? i'm from Portugal... and mine is from a different network... 'll it work?
Likely to work
Yes, it is likely to work.
EE is a network in the UK.
The stock firmware is coming form the German Huawei site.
It did work for my device, at any rate, there are no guarantees.
danielhvf said:
what's EE? an network? i'm from Portugal... and mine is from a different network... 'll it work?
Click to expand...
Click to collapse
Hi,
I need help with getting SD card working on a different Huawei router, could anyone of you 5776 owners please copy and paste the JavaScript from this location?
http://192.168.1.1/js/sdcard.js
Please put it on Pastebin.
Thanks in advance.
E:V:A said:
Hi,
I need help with getting SD card working on a different Huawei router, could anyone of you 5776 owners please copy and paste the JavaScript from this location?
http://192.168.1.1/js/sdcard.js
Please put it on Pastebin.
Thanks in advance.
Click to expand...
Click to collapse
are there any info I shoud be worry about or there is "clean" java script
jawert said:
are there any info I shoud be worry about or there is "clean" java script
Click to expand...
Click to collapse
No nothing to worry about. That is just the location of the JS served by the router. (It will not run, when you click that link.) But since yesterday I also need these:
Code:
[I]sdcardsharing.html[/I] [[B]disable [/B]JavaScript before viewing this page]
[I]sdupload.js
main.js[/I]
If you're interested in knowing what I'm doing, you can check here:
#14
E:V:A said:
Hi,
I need http://192.168.1.1/js/sdcard.js
Click to expand...
Click to collapse
http://pastebin.com/TTUHxduY
main.js
http://pastebin.com/Uv8bYLth
sdupload.js
http://pastebin.com/CNLHkXeH
unfortunately i'm to "stupid" to past sdcardsharing.html - just can not find - receiving info : "Your browser does not support JavaScript."
if you will give me info step by step i will
jawert said:
... unfortunately i'm to "stupid" to past sdcardsharing.html - just can not find - receiving info : "Your browser does not support JavaScript."
if you will give me info step by step i will
Click to expand...
Click to collapse
Thanks a lot, this will help!
No problem, just go to the page:
http://192.168.1.1/html/sdcardsharing.html
and then (if you use Firefox) hit CTRL-U. This opens a new browesr window with the pure HTML code, without the JavaScript modifications, so that you can copy & paste it.
E:V:A said:
sdcardsharing.html
Click to expand...
Click to collapse
i'm using opera (12.16) but it works same
http://pastebin.com/PvdEiuaA
Update and lose 4G
I recently followed the instructions on installing the stock firmware on my OPTUS 4G E5776. All seemed right, I had the Huawei dashboard, but after doing this, all I can connect to is to the 3G network. It seems that if you use the stock firmware, you will lose the ability to connect to the 4G network. Has anyone else had this problem? Is there a way to set is so you can still get 4G? I have searched high and low and could not find anywhere to download and reinstall the OPTUS firmware again so I just returned it to where I purchased it from for a replacement. I am not game enough to do this again until I know I can get 4G, as this is the reason I purchased the 4G modem in the first place for better and faster speeds.
Thanks
4G Connection
@Brad1982
Someone who followed the instructions on my website to update the firmware just got in contact with me today with exactly the same issue (on the UK EE network).
To restore 4G connection go to the connection settings page and switch from Auto to 4G only and save setting. The modem will now connect correctly. Once connected for the first time you can then switch back to Auto and 4G should still work. Why this step is necessary is a bit of a mystery I'm afraid!
drops connection
I followed this thread to unlock and install the default firmware, all went ok but I find that it drops connection frequently. I change settings to 3G only and manual connect which seems to help but it still does it, any ideas?
I have seen some of the bugs mentioned here also:
http://willtaylor.org/update-e5776-firmware/
I found this link looking for an update but it looks like source code, may be useful to someone:
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=16443
Hi Guys
First of all, i´m sorry my english is not very good and i have to use a Translator.
I recently bought a used SM-G930F. The previous owner had flashed before so although everywhere says SM-G930F in settings in "model information" says "SM-G930FD". Also when a SIM is inserted the "DualSIM Administrator" appears. Had Mashmallow installed and worked perfectly.
I wanted to try flashing the new NOUGAT BTU firmware stock. I did it through ODIN. The process had no errors. When the phone restarted I see that it has no signal. It recognizes that you have a SIM card inserted but "emergency calls only" appears.
The IMEI was not deleted.
Immediately I downloaded a stock firmware from my country ARGENTINA to go back to MARSHMALLOW and I installed it but the same thing is still happening. Then I tried to download another stock firmware from my country and my operator CLARO ARGENTINA, but the same thing is still happening.
I read in forums that the problem may be the modem, but I understand that is modified in the box "CP" of ODIN when flashing.
I honestly do not know what else to do. I also do not remember what firmware I had before doing the whole process.
I understand I should have backed up everything but I did not.
So I ask you please if you can help me.
Thank you very much
dhg2015 said:
Hi Guys
First of all, i´m sorry my english is not very good and i have to use a Translator.
I recently bought a used SM-G930F. The previous owner had flashed before so although everywhere says SM-G930F in settings in "model information" says "SM-G930FD". Also when a SIM is inserted the "DualSIM Administrator" appears. Had Mashmallow installed and worked perfectly.
I wanted to try flashing the new NOUGAT BTU firmware stock. I did it through ODIN. The process had no errors. When the phone restarted I see that it has no signal. It recognizes that you have a SIM card inserted but "emergency calls only" appears.
The IMEI was not deleted.
Immediately I downloaded a stock firmware from my country ARGENTINA to go back to MARSHMALLOW and I installed it but the same thing is still happening. Then I tried to download another stock firmware from my country and my operator CLARO ARGENTINA, but the same thing is still happening.
I read in forums that the problem may be the modem, but I understand that is modified in the box "CP" of ODIN when flashing.
I honestly do not know what else to do. I also do not remember what firmware I had before doing the whole process.
I understand I should have backed up everything but I did not.
So I ask you please if you can help me.
Thank you very much
Click to expand...
Click to collapse
try flashing the specific modem and bootloader of your phone. you might want to try mashmallow modem.
You say I try flash only the modem and bootloader that come included in stock firmware from other countries? Must I only check the boxes "BL" and "CP" from ODIN? Thats correct?
dhg2015 said:
You say I try flash only the modem and bootloader that come included in stock firmware from other countries? Must I only check the boxes "BL" and "CP" from ODIN? Thats correct?
Click to expand...
Click to collapse
I also tested Firmware flash from several countries in America and others, for example Chile, Colombia, Brazil, Mexico, Germany, Portugal. I also tested with some G930FD firmware from Vietman, Singapore, but there was no case. The only thing that stands out is that with Vietnam although no signal, "allowed" the band 4G, did not allow it in all previous cases, do not know if something to see.
u have any issues with wi-fi?? it looks like a modem problwm to me..
Try flashing the stock rom back with the samsung kies program so it will flash back the original stock rom that came with the phone and see if you then have your connection back. If that works then try to flash the BTU.
RiTCHiE007 said:
Try flashing the stock rom back with the samsung kies program so it will flash back the original stock rom that came with the phone and see if you then have your connection back. If that works then try to flash the BTU.
Click to expand...
Click to collapse
Thanks very much for your answer, I tried it as you indicate, but unfortunately it does not work, it still has no signal
lekou said:
u have any issues with wi-fi?? it looks like a modem problwm to me..
Click to expand...
Click to collapse
Hi!
No, the Wi-Fi works fine
Phone is likely IMEI blocked (reported stolen)
Is it possible? I'll find out and tell you. Thank you
dhg2015 said:
Is it possible? I'll find out and tell you. Thank you
Click to expand...
Click to collapse
You're right, I took the phone to a technician and repaired it. Thank you very much for your help.
a.
Or maybe simlock
dhg2015 said:
You're right, I took the phone to a technician and repaired it. Thank you very much for your help.
a.
Click to expand...
Click to collapse
:good:
I am getting my Sony "U.S" Version just because of its warranty, is there a way i can Enable the fingerprint. Please help
currently all you could do is flash the International firmware. I haven't really looked into anything though personally. I'm not sure how they disabled it, maybe changing a 0 to 1 somewhere but I doubt it.
Yes I got the US version from Amazon and just flashed the CE1 firmware and fingerprint works after flashing that firmware
Sent from my G8142 using Tapatalk
Buy it from the UK. Same warranty. No need to flash anything. Save about $100.00
NO BRAINER!
jaseman said:
Buy it from the UK. Same warranty. No need to flash anything. Save about $100.00
NO BRAINER!
Click to expand...
Click to collapse
It doesn't have US warranty, probably you have to send it back to UK. Personally I don't care about warranties, never had to use for any of my many phones until now partly because don't keep the phone that long. The other advantage buying from Amazon US is ease of return in case you don't like the phone. If you played with it before and 100% sure you like the phone and will definitely keeping it, then yeah better to buy from clove and save the extra $150 or change.
kirdroid said:
Yes I got the US version from Amazon and just flashed the CE1 firmware and fingerprint works after flashing that firmware
Sent from my G8142 using Tapatalk
Click to expand...
Click to collapse
Can you post a simple guide to do this with some links on where to get all the tools firmware, flashy oil etc... Also I think there are some alternatives for the firmware such as the US and European version any differences between them?
samurayx89 said:
Can you post a simple guide to do this with some links on where to get all the tools firmware, flashy oil etc... Also I think there are some alternatives for the firmware such as the US and European version any differences between them?
Click to expand...
Click to collapse
I used the newflasher tool in the below link. Personally this is my first Xperia device in a long time and haven't used the Xperia flashing tools before.
https://forum.xda-developers.com/showthread.php?t=3619426
1. Make sure you have the right drivers installed. I installed Xperia companion tool since someone mentioned that should install all the drivers. I also installed the flash tool and fastboot drivers from Xperia flash tool since I had issues putting my phone in flash mode. If you are using Windows 10 you have disable verify driver signing in boot before installing the flash tool drivers.
2. Download the firmware of your choice, I chose CE1 (Central Europe) firmware over other Asian firmware.
3. Then follow the instructions in the thread to flash.
Main issue I had was putting my phone in flash mode. But apparently flash mode doesn't have any screen like recovery etc. You just have to turn off your phone then while holding the volume button down connect your phone via USB. That should put in flash mode even though you don't get any screen to say it's in flash mode.
Once I put in flash mode everything went fine by following instructions in the thread.
Thanks,
So when you downloaded the files with XperiFirm and used NewFlasher did you delete any of the files or just drop newflasher into the created directory and flashed everything.
samurayx89 said:
Thanks,
So when you downloaded the files with XperiFirm and used NewFlasher did you delete any of the files or just drop newflasher into the created directory and flashed everything.
Click to expand...
Click to collapse
Just dropped all newflasher files into the created firmware directory and just ran the newflasher application from that directory. It flashed everything in there.
I know the thread says if you want you can remove specific things from the firmware directory if you don't want to flash certain things. But I didn't see any reason to do that and I never care about wiping my device since all my info is backed up in the cloud and takes around 30 minutes to restore and be up and running again. Just to be safe I flashed everything so that it doesn't screw up anything. I haven't used the Xperia flash tools before so kept it simple.
kirdroid said:
Just dropped all newflasher files into the created firmware directory and just ran the newflasher application from that directory. It flashed everything in there.
I know the thread says if you want you can remove specific things from the firmware directory if you don't want to flash certain things. But I didn't see any reason to do that and I never care about wiping my device since all my info is backed up in the cloud and takes around 30 minutes to restore and be up and running again. Just to be safe I flashed everything so that it doesn't screw up anything. I haven't used the Xperia flash tools before so kept it simple.
Click to expand...
Click to collapse
Does Google Assistant work for you on the CE1 firmware? It's not popping up for me at all.
Yadiel2007 said:
Does Google Assistant work for you on the CE1 firmware? It's not popping up for me at all.
Click to expand...
Click to collapse
Yeah working fine no issues here (long press home button to bring up assistant) ... Even ok Google works fine as well when screen is on.
kirdroid said:
Just dropped all newflasher files into the created firmware directory and just ran the newflasher application from that directory. It flashed everything in there.
I know the thread says if you want you can remove specific things from the firmware directory if you don't want to flash certain things. But I didn't see any reason to do that and I never care about wiping my device since all my info is backed up in the cloud and takes around 30 minutes to restore and be up and running again. Just to be safe I flashed everything so that it doesn't screw up anything. I haven't used the Xperia flash tools before so kept it simple.
Click to expand...
Click to collapse
Do you still have Volte working after flashing the CE firmware?
tdgillihan said:
Do you still have Volte working after flashing the CE firmware?
Click to expand...
Click to collapse
Also curious about volte, I bought mine from Best Buy yesterday and it doesn't have Volte on T-Mobile in the us. I'm hoping flashing the CE firmware enables it.
HigherSensation said:
Also curious about volte, I bought mine from Best Buy yesterday and it doesn't have Volte on T-Mobile in the us. I'm hoping flashing the CE firmware enables it.
Click to expand...
Click to collapse
Hmmm, that's weird. My understanding was that it was enabled on the US version but not on the international. Are you sure you don't have it?
tdgillihan said:
Hmmm, that's weird. My understanding was that it was enabled on the US version but not on the international. Are you sure you don't have it?
Click to expand...
Click to collapse
I'm pretty sure it's the US model because the fingerprint sensor is disable.
there is no VOLTE on this phone, no menu options for advanced calling like wifi calling either.
tdgillihan said:
Hmmm, that's weird. My understanding was that it was enabled on the US version but not on the international. Are you sure you don't have it?
Click to expand...
Click to collapse
HigherSensation said:
I'm pretty sure it's the US model because the fingerprint sensor is disable.
Click to expand...
Click to collapse
afuller42 said:
there is no VOLTE on this phone, no menu options for advanced calling like wifi calling either.
Click to expand...
Click to collapse
Sorry, my bad, mixed up my forums. Comments deleted.
afuller42 said:
there is no VOLTE on this phone, no menu options for advanced calling like wifi calling either.
Click to expand...
Click to collapse
Must be an Branding/Software issue i guess.
On the unbranded EU version, both is available.
wifi calling: Settings -> Wireless&Networks -> Wi-Fi Calling
VoLTE: Settings -> Wireless&Networks -> Mobile Networks -> Enable VoLTE
Tuerkay said:
Must be an Branding/Software issue i guess.
On the unbranded EU version, both is available.
wifi calling: Settings -> Wireless&Networks -> Wi-Fi Calling
VoLTE: Settings -> Wireless&Networks -> Mobile Networks -> Enable VoLTE
Click to expand...
Click to collapse
Are you sure it has nothing to do with your service provider?
I bought mine from the UK (not sure if it is the same as the unbranded EU version you mention) and when I look for those same settings they do not exist.
I am in the US running on AT&T as an unlocked go phone customer.
afuller42 said:
there is no VOLTE on this phone, no menu options for advanced calling like wifi calling either.
Click to expand...
Click to collapse
jaseman said:
Are you sure it has nothing to do with your service provider?
I bought mine from the UK (not sure if it is the same as the unbranded EU version you mention) and when I look for those same settings they do not exist.
I am in the US running on AT&T as an unlocked go phone customer.
Click to expand...
Click to collapse
Could be that the settings are not available unless your carrier/plan supports them. Pretty sure anyone slipping a T Mobile sim in has those services.
Hi everybody,
I still have a problem with my carrier signal.
1. Sony XZ SOV34 has SIM unlocked
2. Already unlocked bootloader
3. Using Global ROM and already using ExistenZ Oreo
The problem that makes me confused is imei and baseband, there is no problem, but the sim carrier cannot register.
From this problem what should I do?
Hello can you check your apn settings for your operator? If they are all setup correctly try selecting network manually.
Note: You need to search your own mobile operator's apn settings I can't really help with that.
oguzbatu said:
Hello can you check your apn settings for your operator? If they are all setup correctly try selecting network manually.
Note: You need to search your own mobile operator's apn settings I can't really help with that.
Click to expand...
Click to collapse
You see my attach i can't write access APN and my Fido keys is not provisioned but safetynet its ok. So what i should do now?
Thank you
seyrarms said:
You see my attach i can't write access APN and my Fido keys is not provisioned but safetynet its ok. So what i should do now?
Thank you
Click to expand...
Click to collapse
Fido keys doesn't matter for network connectivity. Since you can't setup APN thats the reason it is not connecting. Are you sure that you are not running dual sim version of Xperia XZ? Can you also try tp flash stock rom without exitenz mods? To see if it changes anything.
oguzbatu said:
Fido keys doesn't matter for network connectivity. Since you can't setup APN thats the reason it is not connecting. Are you sure that you are not running dual sim version of Xperia XZ? Can you also try tp flash stock rom without exitenz mods? To see if it changes anything.
Click to expand...
Click to collapse
My Xperia XZ single sim not dual idk what happen with this. Since i unlock this bootloader from tool S1 Network tool
My sim carries change to "No Services". I'm tried to re flash back to Japan rom and back again to global rom but same just "no service"
seyrarms said:
My Xperia XZ single sim not dual idk what happen with this. Since i unlock this bootloader from tool S1 Network tool
My sim carries change to "No Services". I'm tried to re flash back to Japan rom and back again to global rom but same just "no service"
Click to expand...
Click to collapse
Can you try to flash your device with Sony's emma tool and see if it works. If it doesn't fix I don't know what will because this doesn't seem something about software nothing like this happened to anybody I assume.
oguzbatu said:
Can you try to flash your device with Sony's emma tool and see if it works. If it doesn't fix I don't know what will because this doesn't seem something about software nothing like this happened to anybody I assume.
Click to expand...
Click to collapse
Ok i will try
After flashing the firmware..Try to reflash baseband(modem) only..I got this problem back then when i downgrade to marshmallow..and update to nougat via OTA...i lost baseband and imei number...but it's all fixed after i reflash baseband..
NOTE:BASEBAND MUST BE THE SAME AS YOUR ANDROID VERSION!!!
oguzbatu said:
Can you try to flash your device with Sony's emma tool and see if it works. If it doesn't fix I don't know what will because this doesn't seem something about software nothing like this happened to anybody I assume.
Click to expand...
Click to collapse
Thank you sir my signal is back. I'm use tool EFS Profesional can give back again
Roowz said:
After flashing the firmware..Try to reflash baseband(modem) only..I got this problem back then when i downgrade to marshmallow..and update to nougat via OTA...i lost baseband and imei number...but it's all fixed after i reflash baseband..
NOTE:BASEBAND MUST BE THE SAME AS YOUR ANDROID VERSION!!!
Click to expand...
Click to collapse
Thanks sir
Just follow one of these Guides...
If U have Unlock Code for Network:
If not try this. It's not easy but works:
I can't post links here. PM me if you still need help
If your baseband and IMEI has gone just flash the 39.0.C.0.282 AU either with flashtool. Better option is xflasher
seyrarms said:
Thank you sir my signal is back. I'm use tool EFS Profesional can give back again
Thanks sir
Click to expand...
Click to collapse