Hard-bricked 6039Y - User in tears - Onetouch Idol 3 Q&A, Help & Troubleshooting

Hello there
What happened:
I was trying to install Cyanogen 12.1 on my Idol 3 6039Y (4.7") through TWRP, which was unsuccessful because of E: Error executing updater binary in zip and E: Unable to mount /data errors.
I searched for a solution on xda and came across topic 2683787 ("Bootloop + E:unable to mount /data") which seemed to fit my problem, and executed the suggested command in the command line:
Code:
mke2fs -T ext4 /dev/block/mmcblk0p8
It took barely a couple seconds to complete, showed a few square-like characters like unsupported Unicode and "Done." At that point I decided to click on "Reboot to recovery"
That was the last time I saw my idol 3 alive. It never rebooted, not even bootloop or logo.
What I see now:
I think it is hardbricked since pressing the power button or any combination of Power+Volume keys won't do anything. No bootloop, no logo, not even backlight or vibration. No nothing. When I plug it in, the battery icon does not appear either, just the white/blue LED is lit. It cannot boot to recovery and not even to Download mode. But when plugged in to the computer, it appears in Device Manager as Android HS-USB Diagnostics 9006 (COM8)
What I have tried already
I tried long-pressing the power button, Power+Volume Up combination, Power+Volume Up+Volume Down combination etc...
ADB and fastboot don't detect the device because it is turned off.
I tried disconnecting and reconnecting the battery, all of the buttons combinations while plugging the cable, with battery connected and with the battery disconnected.
I tried to flash back to stock with Mobile Upgrade Q (several versions including the latest 5.0) but it stops at 2% after 260 seconds, saying it was unable to read from terminal.
I also tried with Panasonic Eluga EB-90S55EWLv1009.exe (even though it's for the 6045, I am desperate) and it also stops after some minutes, saying "COM8->PC[2] search Disk over time! Please check the handset or driver! (Error code = 40011)"
I have spent the last 12 hours continuously searching for a solution and trying everything that I could think of. I have read all of the other threads about bricked idol 3 but none of them worked for me :crying:
I am desperate and almost in tears, does anyone have an idea of what I could try now ?
Since the phone shows up as a COM port even though it's off, maybe something with QPST's QFIL application ? Can I try to flash something using that ?
Thank you.

Mobile upgrade Q 5.0 is not the latest 5.0.9 is I had the same issues with 5.0.0 you don't have to use the idol 3 specific version which is 5.0.0
Sent from my 6045I using Tapatalk

Thank you for your answer, I have tried with version 5.0.9 on two different PCs, but it still does not work
I get the same error as with previous versions 4.8.7 and 5.0.0:
"Read terminal information failed. Please check the phone status."
It always stops after 4:35 minutes with this error.

are you sure you have a 6039Y? you wrote white/blue led, the 6039Y has only white led
did you pressed the powerbutton over ten seconds? the power button worked so far perfectly? i have earlier deleted even system partitions from my 6039Y, but i was able to turn the phone on everytime.

I have exactly the same problem on 6045i. I was in whatsapp and suddenly the phone turnedinto a black screen. I rebooted it but it only showed the led on, and nothing more, I can't get into recovery or download mode. The PC also recognizes it as Android HS-USB Diagnostics 9006 (COM3). I've tried Mobile Upgrade Q 4.9.2, 5.0.0, 5.0.6 and 5.0.9 and nothing, it keeps showing the error: "There is no greater software version available to upgrade your phone, actual version of your phone is the latest" :'(

Kuryaki said:
I've tried Mobile Upgrade Q 4.9.2, 5.0.0, 5.0.6 and 5.0.9 and nothing, it keeps showing the error: "There is no greater software version available to upgrade your phone, actual version of your phone is the latest" :'(
Click to expand...
Click to collapse
i know it sounds weird but try mobile q again a few days later mobile q is a very poorly written app, it gives this message even when their servers are down a few months ago i wanted to force it to update my 6039Y, so i deleted some system partitions and this lame app told me that there is no greater software version blahblah... in fact their server was down for a few days.
-edit- i've just read again your post, something is wrong, if mobile q gives you this message, your phone is not dead, you should be able to enter in download mode

jani0417 said:
i know it sounds weird but try mobile q again a few days later mobile q is a very poorly written app, it gives this message even when their servers are down a few months ago i wanted to force it to update my 6039Y, so i deleted some system partitions and this lame app told me that there is no greater software version blahblah... in fact their server was down for a few days.
-edit- i've just read again your post, something is wrong, if mobile q gives you this message, your phone is not dead, you should be able to enter in download mode
Click to expand...
Click to collapse
Yep, I know the phone is not enterily dead.... But at this point, I'm still unable to bring it back to life xD.... I'v tried Mobile Upgrade, QFIL, Panasonic Eluga... I've read that the "Android (Qualcomm depending on drivers you have installed on PC) HS-USB Diagnostics 9006 (COMx)" is some kind of Download mode... but I'm just stucked into this for few weeks. If you guys have another solution to this problem, plz plz plz let me know...

Kuryaki said:
Yep, I know the phone is not enterily dead.... But at this point, I'm still unable to bring it back to life xD.... I'v tried Mobile Upgrade, QFIL, Panasonic Eluga... I've read that the "Android (Qualcomm depending on drivers you have installed on PC) HS-USB Diagnostics 9006 (COMx)" is some kind of Download mode... but I'm just stucked into this for few weeks. If you guys have another solution to this problem, plz plz plz let me know...
Click to expand...
Click to collapse
I have the same problem, do you solved?

pablo_23_ said:
I have the same problem, do you solved?
Click to expand...
Click to collapse
Using latest mobile upgrade q? 5.1.7?
Sent from my ZTE A2017U using Tapatalk

Unjustified Dev said:
Using latest mobile upgrade q? 5.1.7?
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
yes, and i get a error message: "There is not greater software version availiable... actual version is the latest"

You know that partitions change from model to model and mmcblk0p8 by default is the MAIN partition for all ( IMEI, etc, etc ). Why the hell you format that!!!??? Probably your error was TWRP version! I think even Mobile Upgrade Q can´t help you, sorry! But we never know... Do you have phone drivers to try Mobile Q?
Good luck!
.
---------- Post added at 03:34 PM ---------- Previous post was at 03:14 PM ----------
Read this:
Return to stock firmware/recovery
https://forum.xda-developers.com/idol-3/help/return-to-stock-firmware-recovery-t3216077
.

4pda.ru/forum/index.php?showtopic=702765&st=80#entry43097800

Related

recovery mode not working

hello, i think this forum is my last hope, i have a tablet and i've been searched the correct rom for it, but is not very commun in the market (DOPO), and i am a very noob in this kind of topics, i tried the recovery mode but now shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the no1, it stays there for hours without anything happening, i guess, i only have the choice to flash the tablet with a rom, but i will apreciate if you guys help me how to find the right way to reinstall my android OS,or find the right OS for my tablet. please, help me
My Tablet:
DOPO Double Power
Model: GS-918
9" multitouch display
8GB Memory
Android 4.1.1 Jelly Bean operating system
1.5GHz Amlogic Cortex A9 dual-core processor
1GB system memory
800 x 480 resolution
sdesignz said:
hello, i think this forum is my last hope, i have a tablet and i've been searched the correct rom for it, but is not very commun in the market (DOPO), and i am a very noob in this kind of topics, i tried the recovery mode but now shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the no1, it stays there for hours without anything happening, i guess, i only have the choice to flash the tablet with a rom, but i will apreciate if you guys help me how to find the right way to reinstall my android OS,or find the right OS for my tablet. please, help me
My Tablet:
DOPO Double Power
Model: GS-918
9" multitouch display
8GB Memory
Android 4.1.1 Jelly Bean operating system
1.5GHz Amlogic Cortex A9 dual-core processor
1GB system memory
800 x 480 resolution
Click to expand...
Click to collapse
Download This File
https://docs.google.com/file/d/0B8YnQA1FX-_yUU1ERXh1TjNUbnc/edit?usp=sharing
Click to expand...
Click to collapse
Install Cwm On your tab with mtk droid tools (search for it on the internet)
Boot into recovery mode....
The file you downloaded must be in your sd card....
Select apply update from sd card...
Choose the zip file....
Click yes....
The phone will boot normally....
do everything at your own risk... don't forget to make a backup of your tab with mtkdroid tools..... I am not responsible for any harm caused to your device
Click to expand...
Click to collapse
N'ayam Amarsh'e said:
Download This File
Install Cwm On your tab with mtk droid tools (search for it on the internet)
Boot into recovery mode....
The file you downloaded must be in your sd card....
Select apply update from sd card...
Choose the zip file....
Click yes....
The phone will boot normally....
Click to expand...
Click to collapse
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
EDIT: ok i run the the .zip file named dopo7088stk and this is what it says:
install/sdcard...
finding update package...
opening update package...
verifying update package...
installation aborted.
sdesignz said:
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
Click to expand...
Click to collapse
Mtkdroid tools only works with mediatek devices (with a mediatek chip eg mt6577, mt6589 etc) so will not work with your device
What actually is wrong with your tablet?
sdesignz said:
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
EDIT: ok i run the the .zip file named dopo7088stk and this is what it says:
install/sdcard...
finding update package...
opening update package...
verifying update package...
installation aborted.
Click to expand...
Click to collapse
Sorry Then i can't help... But you can try to do factory reset from CWM REcovery... If this helps then you can boot normally.. If this too doesn't works then you will have to give it to SVC.....
Sorry Then i can't help... But you can try to do factory reset from CWM REcovery... If this helps then you can boot normally.. If this too doesn't works then you will have to give it to SVC.....
Click to expand...
Click to collapse
but to do a cwm recovery i need the tablet drivers isn't it?
and i don't have them :/
oscarblue48 said:
Mtkdroid tools only works with mediatek devices (with a mediatek chip eg mt6577, mt6589 etc) so will not work with your device
What actually is wrong with your tablet?
Click to expand...
Click to collapse
it freezes in the operating system start logo, or shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the 1, it stays there for hours without anything happening. I already tried using the system recovery but it did not work, i tried with diferent roms but nothing :/, i don't have the warranty paper, i guess i'm ****ed :C
sdesignz said:
but to do a cwm recovery i need the tablet drivers isn't it?
and i don't have them :/
it freezes in the operating system start logo, or shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the 1, it stays there for hours without anything happening. I already tried using the system recovery but it did not work, i tried with diferent roms but nothing :/, i don't have the warranty paper, i guess i'm ****ed :C
Click to expand...
Click to collapse
Can you get into the recovery menu and do factory reset or anything else??
I guess you've tried resetting via the reset button?
There doesn't appear to be a stock rom available for the GS-918 on the Dopo website, have you contacted them to see if they are able to help?
You could try leaving the tablet on when it freezes until the battery runs right down and it turns off, then put it on charge and try it again, not much else I can think of at the moment
oscarblue48 said:
Can you get into the recovery menu and do factory reset or anything else??
I guess you've tried resetting via the reset button?
There doesn't appear to be a stock rom available for the GS-918 on the Dopo website, have you contacted them to see if they are able to help?
You could try leaving the tablet on when it freezes until the battery runs right down and it turns off, then put it on charge and try it again, not much else I can think of at the moment
Click to expand...
Click to collapse
yes i can do everything but it doesn't fix anything :C
and yes, i've tried the ressetting via reset button.
i can swear you there is no dopo GS-918 model drivers or rom in the whole web u.u
I contacted them but they only told me about the recovery menu, and i send them a question but they haven't answered me yet.
((((
now the pc recognizes the tablet via usb, well, it recognized first like vid_1f3a_pid_efe8_driver, then it disappeared and recognized a M3-CHIP driver but with errors (The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver, blabla.)
so i think i need to find the M3-CHIP driver isn't?
EDIT:
I let the battery ran out, and now shows me the box that says: Android is upgrading, Optimizing app 1,2,3,4,5,6,7 of 39, but never pass the 7 now, then i restart the tablet againt, and say: optimizing app 20 of 23, but it freezes,then i restart the tablet... againt, and say: optimizing app 1 of 7, i restart again the tablet, and then it freezes in the first logo forever, the end :C
So, i think one of those last applications is creating the conflict
EDIT 2:
so, now im stuck in the system recovery, i choose reboot system now, and again, i am in System recovery , even if i only press the + volume or -, with the tablet off, it boots automaticly the system recovery :S
sdesignz said:
yes i can do everything but it doesn't fix anything :C
and yes, i've tried the ressetting via reset button.
i can swear you there is no dopo GS-918 model drivers or rom in the whole web u.u
I contacted them but they only told me about the recovery menu, and i send them a question but they haven't answered me yet.
((((
now the pc recognizes the tablet via usb, well, it recognized first like vid_1f3a_pid_efe8_driver, then it disappeared and recognized a M3-CHIP driver but with errors (The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver, blabla.)
so i think i need to find the M3-CHIP driver isn't?
EDIT:
I let the battery ran out, and now shows me the box that says: Android is upgrading, Optimizing app 1,2,3,4,5,6,7 of 39, but never pass the 7 now, then i restart the tablet againt, and say: optimizing app 20 of 23, but it freezes,then i restart the tablet... againt, and say: optimizing app 1 of 7, i restart again the tablet, and then it freezes in the first logo forever, the end :C
So, i think one of those last applications is creating the conflict
EDIT 2:
so, now im stuck in the system recovery, i choose reboot system now, and again, i am in System recovery , even if i only press the + volume or -, with the tablet off, it boots automaticly the system recovery :S
Click to expand...
Click to collapse
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
oscarblue48 said:
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
Click to expand...
Click to collapse
well i contacted the dopo tech support guy , to see if i can do something else, i guess there is no mucho to do now, maybe i could sell the tablet for parts :C
too bad because i just have 4 months with it, at least i learned something about android, do a f ucking backup and enable debugging mode xd
thanks for all your help and the given support .
I apreciate your replies and now i know a litte bit of this kind of topics .
oscarblue48 said:
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
Click to expand...
Click to collapse
The factory reset on these models (DOPO/nobis/apex) only re-initialize the data/cache partitions it will not touch/fix the system partition.
Based on the gist of the initial post -- the only solution is to send the tablet to the factory so that they can reload the firmware.
I am in the same boat right now...
Originally I had some file system errors on the internal nand (on APEX GS-918) that caused the boot animation to loop endlessly -- because I had 'USB Debugging' enabled' I was able to open a adb shell
and run fsck/e2fsck and fix it.
But I have a similar problem now (possibly due to adding an option in build.prop) and also disabled 'USB Debugging' and
I can no longer use adb to open a shell during the boot logo.
PS: I hate to necro a thread -- but people need to know that the issue, described, is by-design........they want you to send it in the factory.
When doing a factory reset, any respectable stock recovery, should restore the system partition.
PPS: I do not believe you can install and update in the stock recovery that attempts to write to the system partition.
I believe that can only be handled by using various amlogic tools (such as amlogic usb burning tool, which requires the firmware image that we don't have)

Help me unbrick my lenovo A850!

Hey guys! My phone is now a brick. Can anyone show me how to repair the boot for it? Many thanks.
hungtrauvang said:
Hey guys! My phone is now a brick. Can anyone show me how to repair the boot for it? Many thanks.
Click to expand...
Click to collapse
Flash a new rom
Watch this video...
hungtrauvang said:
Hey guys! My phone is now a brick. Can anyone show me how to repair the boot for it? Many thanks.
Click to expand...
Click to collapse
What happens if you power it on while holding down the up and down buttons?
Frogmanstar said:
What happens if you power it on while holding down the up and down buttons?
Click to expand...
Click to collapse
Nothing happens. Really sad.
hungtrauvang said:
Nothing happens. Really sad.
Click to expand...
Click to collapse
This just means you don't have a recovery.. just flash a new rom.
hi XDA community i have a problem regarding my a850 and i hope u or anybody can reply this comment in an instance cuz im in emergency...
IM EXPLAINING MY PROBLEM VERY DETAILED SO IT'S GONNA BE VERY LONG COMPOSITION, INCLUDING FROM IM ROOTING THE PHONE UNTIL I TYPED THIS COMPOSITION
so recently i "Framarooted" my device and was working properly as i expected,then i want to install TWRP, i see my baseband version does not have ROW or CN in there, it kinda like "A850.V13 ...(cant remember)", but i flashed anyway using the ROW version of TWRP and Mobileuncle MTK Tools. When I want to enter recovery (via MTK Tools) it doesnt show up, just stuck at white,big "Lenovo" logo (it probably doesnt work) but i was able to boot back to normal. Then i used System App Remover from Play and attempted to delete some chinese apps, and I DID a mistake... i was so clumsy enough to delete all chinese apps that origins from the rom i accidently deleted the file "classical" (which i guess the entire system ui, launcher etc) . Upon after deletion of that file I SHOULD HAVE NOT DELETE , it suddenly booted off with the startup sound muted halfway (its like, the boot startup sound have like 4 second duration and i heard the sound just for 1 sec).
Then it boots up again, but stuck at the logo "Lenovo For Those Who Do" after startup animation, so i assume this is bootloop or soft brick
Realising this incident i GOOGLED " a850 bootloop","a850 unbrick","a850 stock rom","a850 emergency reset" and "a850 emergency backup", then I found a website which describes how to flash stock rom to a850, so i did that, as it might work, but actually not for my case. I followed and downloaded exactly steps and files from that website and loaded Flashtool with its scatter file, then ticked PRELOAD and selected the preload.img, followed by checking USB mode ,clicking "Forced High Speed", checked the DA DL thingy, clicked Firmware Upgrade and the progress bar moved, after that i plugged my phone, without battery, to the pc via usb. I heard the hardware insert sound, but, Flashtool did not start flashing, it;'s still SEARCHING.
Then I read that u need the USB drivers, so I assume i do not have drivers for this phone. I used the Device Manager step and when I plug my phone, it pops up "MT65xx Preloader"(or MTK i dont remember) then I quickly rightclick and "Update Driver". It has two selections, ONLINE or BROWSE, so i clicked the online solution, but Windows seems cant find the driver i need,
so i used BROWSE option, which i used your usb driver by entering the directory of the driver in your file in "C:\Users\User\Downloads\Compressed\Lenovo_Drivers_SP_Flash_Tool_v3.1316.0.150\Drivers" clicked install then it pops up an error "The third party INF does not contain digital signature information", so it doesnt install. So I used USBDeview and plugged my phone again without battery, it pops up "MT65xx Preloaded" with a purple dot, and if you need, i rightclicked that purple dot and clicked PROPERTIES, and here's information it gave:
Device Name: MT65xx Preloader
Device Type: CDC Data
Description: MT65xx Preloader
Connected: Yes
Safe to Unplug: NO
Disabled: NO
USB Hub: NO
Drive Letter:*blank
Serial Number:*blank
Created Date: 12/10/2014 2:01:15 AM
Last Plug/Unplug Date:12/10/2014 2:01:15 AM
VendorID: 0e8d
ProductID :2000
Firmware Revision : 1.00
USBClass: 0a
USBSubClass:00
USBProtocol: 00
"Hub Port" until "DeviceMfg" is blank
Power: 500mA
USB Version: 2.00
Driver Description: *blank
Driver Version:*blank
Instance ID: USB\VID_0E8D&PID_2000\5&9ec43f0&0&9
After checked, i resorted to HARD RESET via recovery (i tried to go to recovery again to see there's hope in there) and it BOOTED TO RECOVERY! (yay) but again problem strikes, the recovery I see now is FULLY CHINESE i dont understand even a single option i gave there.
So now my phone condition is still cant boot to launcher, and my very last resort is to use the JTAG option
pls help me u all and pls reply ASAP
thank you
irfanadli97 said:
...clicked install then it pops up an error "The third party INF does not contain digital signature information", so it doesnt install.
Click to expand...
Click to collapse
You should log in to windows with out drivers verification in order to install the drivers. Tutorial on how to do than on windows 8 here. Then flashtool should regognize the phone... (you should fix this problem because you may also need it in the future)
There is also a way to fix your phone (if the classic theme is the problem) using ADB. Go to this page and scroll down to ADB method(tutorial) in order to install the classic.apk as a system apk through ADB.
(i am attaching you the apk: View attachment Theme_classic.apk)
Very thanks though cuz this actually solves my problem on my previous devices which doesn't detect upon connection, but I've actually resorted
to do unsoftbrick by a more professional person in my town (he sells and services phones) and it charged me RM50 ($15). Now my phone is back to normal with a rooted state (Chinese superuser app)
Again thanks for replying.
PS:also can somebody redirect me to lenovo a850 modding page? anybody
irfanadli97 said:
Very thanks though cuz this actually solves my problem on my previous devices which doesn't detect upon connection, but I've actually resorted
to do unsoftbrick by a more professional person in my town (he sells and services phones) and it charged me RM50 ($15). Now my phone is back to normal with a rooted state (Chinese superuser app)
Again thanks for replying.
PS:also can somebody redirect me to lenovo a850 modding page? anybody
Click to expand...
Click to collapse
You did good going to a shop...
What do you mean by "Lenovo a850 modding page"?
u know, where rooted users mod their phone with frameworks, custom roms, installing awesome stuff in theirs'
Sent from my Lenovo A850 using XDA Free mobile app
irfanadli97 said:
u know, where rooted users mod their phone with frameworks, custom roms, installing awesome stuff in theirs'
Sent from my Lenovo A850 using XDA Free mobile app
Click to expand...
Click to collapse
This is such a forum
Tried Installing a custom rom using Flashtool. Now the phone can't come and can't be dected by my pc. Installed the Drivers and they Installed. At first first I was having a Brom Error report Now nothing happens when I p,lug the phone.

Ultra Hard Bricked OPO

Hey guys how are you?
Well a friend gave me an OPO that is really bricked.
Seems like it went to 0% of battery. I charged it to 100% but it does not boot. It stays in loop with the "cyanogen" logo
I tried every solution in every "hard brick resolution" thread.
Instaled ColorOS drivers, Samsung drivers, etc etc etc. nothing works, why? Well..
When i plug the phone on my computer, its recognized has MTP device. The "update driver" option is disabled. Its never recognized as qhsusb_bulk our adb or anything.
It does not seems to enter in fastboot mode ether, has i press vol up + power and it goes to the cyanogen logo again.
Im trying to do this recovery with an windows 10 64bit computer.
I tried to install qualcomm drivers also, but not compatible with my OS.
Not really sure what to do next..
I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.
hea9vy said:
I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.
Click to expand...
Click to collapse
Thank you! But the download links aren't working
cheveux_ said:
Thank you! But the download links aren't working
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=58145465&postcount=48
You can find them in the post above. :fingers-crossed:
hea9vy said:
http://forum.xda-developers.com/showpost.php?p=58145465&postcount=48
You can find them in the post above. :fingers-crossed:
Click to expand...
Click to collapse
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times
cheveux_ said:
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times
Click to expand...
Click to collapse
Try it on a native USB port, so try different ports. Or if you have access to more than one pc/laptop try it on different ones.
I had the same issue a couple of months ago on my wife's oneplus. Spent an hour on my laptop and no go. Fired up the desktop and worked first time.
cheveux_ said:
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times
Click to expand...
Click to collapse
Read the answers that people give you " Tried VOLUME+DOWN " , did you try that ?
Cholerabob said:
Read the answers that people give you " Tried VOLUME+DOWN " , did you try that ?
Click to expand...
Click to collapse
Yes. i Tried both :/
1st thing if it shows the cyanogen logo its not hard brick as per my knowledge.
Yes as suggested try different ports.
hea9vy said:
I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.
Click to expand...
Click to collapse
hi. my friend. will this work for a 100% bricked? the phone cannot even show anything on screen
Sent from my ONE A2003 using Xparent BlueTapatalk 2
https://m.youtube.com/watch?v=O2_x9SnJ1Ak
This guide helped me in getting my dead opo back....
sanjeev7 said:
https://m.youtube.com/watch?v=O2_x9SnJ1Ak
This guide helped me in getting my dead opo back....
Click to expand...
Click to collapse
not working for me.
my PC cannot detect my opo
Sent from my ONE A2003 using Xparent BlueTapatalk 2
Can you get to fastboot?
evertking said:
Can you get to fastboot?
Click to expand...
Click to collapse
no. 100%bricked. go see the YouTube link above my pervious post
Sent from my ONE A2003 using Xparent BlueTapatalk 2
thx. my opo is un bricked. but now back to the problem before I bricked it.
the phone baseband is unknown (no efs save)
and the opo keeps rebooting every few second. is there a way to fix it?
Sent from my ONE A2003 using Xparent BlueTapatalk 2
So still no luck.
I have no fastboot and no recovery.
Has i connect the cable, it starts to charge.
If i click vol up + power it goes to the cyanogen logo and stays there...forever..
The problem is it is always recognized has "mtp device". I'm using an windows xp installation now...
Send me a PM and I'll try to help you!
Jeffrey98 said:
Send me a PM and I'll try to help you!
Click to expand...
Click to collapse
I think i can't send you messages, so here it goes
Hey Jeffrey! Has you asked, here is the pm.
So, in advance, thanks for your help. font know if this can be solved but its nice having someone interested in helping.
So, what i have:
- An OPO that doesn't boot.
- When i press the power button, it shows the one plus logo, and then the cyanogen logo, staying there forever..
- When i press vol up + power, it does the exactly same thing, never entering fastboot
- When i press vol down + power, it does the same thing. never entering recovery
I've prepared an old notebook with windows xp to unbrick the opo. Its completly clean.
The phone is always recognized has mtp device. I've installed all drivers on the internet. ColorOS, samsung, qualcomm, etc etc, everything. nothing works has its never detected in msm8974 or anything.
what can i do?
Thanks in advance
This might help!
If nothing works email oneplus and request for a remote session i did that and they flashed the os, and ps. while doing that they will tell you to download some files and in that some will be password protected and after completing the process they will delete the file so that we cant use it. If possible, after installing drivers they will tell u to reboot the system and log in back but after rebooting just copy the file to another place and then log in back so they can continue the process. Those files may be helpful for a lot of people.I have attached screen shots. Never mind the first folder, the remaining zip files are to be downloaded and in that two are password protected.

Xperia L Bricked, EMMC DL TOOL HELP

I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
I am not able to post image. Help me. I don't have 10 post count yet.
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Agent_fabulous said:
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Click to expand...
Click to collapse
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
nik_123 said:
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
Click to expand...
Click to collapse
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Agent_fabulous said:
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Click to expand...
Click to collapse
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
nik_123 said:
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
Click to expand...
Click to collapse
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
stuckbootloader said:
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
Click to expand...
Click to collapse
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
nik_123 said:
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
Click to expand...
Click to collapse
I'm afraid I can't...
Agent_fabulous said:
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
Click to expand...
Click to collapse
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Agent_fabulous said:
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Click to expand...
Click to collapse
nope... even if we have a snapdragon... since this is a semcflash device a backup is useless...
Sent from my Xperia T using XDA Free mobile app
Hello sir,
I had the same problem a month ago and I fixed my bricked Xperia L.
Just go to this thread and follow the steps ^^
http://forum.xda-developers.com/showthread.php?t=2695344
The thread says u need to download WMSHUA, but its in chinese language. If you don't know what it means just reply to this and i will translate it.
Good luck!
If it didn't worked, or u need help reply.

[Tutorial] FNF Ifive Mini 4s bootloop fix

So you probably did something wrong trying to get a custom recovery or root on your FNF Ifive Mini 4s. Well I did too, that's why I'm writing this
WARNING: This will remove ALL files from your tablet.
Just follow these steps and your tablet should be back on track soon!
So first you have to download FNF Ifive's official upgrade tool which can be found here
Press on the latest one, which as of April 2 is called ifive_mini_4S_US_1.0.6_20170330 Upgrade Tool&Firmware.
Now download both files in the onedrive folder. One is the recovery tool and the other is the latest firmware.
Extract both to a folder of your choosing.
Enter the folder called Driver and run Driverinstall.exe as admin.
Press uninstall driver, press ok and press install driver.
Go back to the main folder and run FactoryTool.exe as admin.
Turn off your tablet.
Enter loadermode on your tablet by connecting it to your computer with the included cable and pressing the powerbutton and Vol-.
Click on "Firmware" in the FactoryTool.
Locate the .img file you downloaded and extracted.
Check the box called "Restore".
Click on "Run" and wait for it to say success.
After it says success you should disconnect the tablet from your computer and just wait for it to boot. This will take a few minutes.
Success! You have now fixed your bootloop and updated to the latest firmware if you did not have it already!
If you had any problems I will be happy to help you
Error
Thanks for your help.
I tried it but it never end with "success". It says: "Wait for loader fail".
I don't know what I don't have to do.
TkMelter said:
Thanks for your help.
I tried it but it never end with "success". It says: "Wait for loader fail".
I don't know what I don't have to do.
Click to expand...
Click to collapse
That is probably because you are doing something wrong when entering loadermode or because you forgot to first uninstall the driver and then install it. When entering loadermode you must make sure the tablet is connected to the pc with the application open and running. Then you turn it off, and enter loadermode by pressing the power button and volume down simultaneously.
Hope this helps
Worked!!
Many thanks.
I manage to get the tablet working. I tried many times and I finally get it to work.
Sry for my bad English.
TkMelter said:
Many thanks.
I manage to get the tablet working. I tried many times and I finally get it to work.
Sry for my bad English.
Click to expand...
Click to collapse
I'm happy it worked
Hello.
And for mac users? How can we do it?
version 1.06, when I update play serviices and reboot, boot loop begins. how can i fix?
gabrielpardal said:
Hello.
And for mac users? How can we do it?
Click to expand...
Click to collapse
The tool only works for windows.
JOAOFRS said:
version 1.06, when I update play serviices and reboot, boot loop begins. how can i fix?
Click to expand...
Click to collapse
By using this tutorial.
Hi,
I successfully upgraded the firmware, it says Build Number ifive_mini_4S_1.0.8-W in my settings but my device still doesn't work properly. The message "Unfortunately Google Play Store/services has stopped" pops up frequently and the boot screen sometimes shows up out off nowhere closing all my apps and locking the device. I also can't open the Play Store at all. I always get the "Unfortunately Google Play Store has stopped" message.
Once I rebooted the device I got a bootloop but it stopped after a while and now my Wi-Fi does not work anymore. I can turn it on but it doesn't find any networks and turns itself off after a few seconds.
I read that some models are just straight up broken. The serial number of my device is P1QRMW1HAR. I bought it a year ago or so and I had problems with bootloops all the time so I barely used the device and hoped for a firmware upgrade that would fix everything. Now my patience is about to run out and I really hope that someone knows how to fix this stupid China device...
ifve mini 4s not loading , FVF logo not booting
hii...i did the upgrade from 1.1.6c to 1.1.7c but is still have same problem ,the upgrade tool showed the upgrade is success my tablet restart three times but was unable to boot and getting the logo FNF,and when i turn off for many houres and turn it on iam getting this message.
E:failed yo mount. /mnt/external_sd (no such device )
E:failed yo mount. /mnt/external_sd (no such device )
Supported API : 3
--wiping data...
Formatting /data...
:silly: it was more text but it disappeared quickly.
pls some help
UnknownDK said:
ifive_mini_4S_US_1.0.6_20170330
Click to expand...
Click to collapse
Hello,I find "ifive_mini_4S_US_1.0.6_20170330" for a long time,can you share it with me?my email:[email protected],THANKS!

Categories

Resources