Database Info

recovery mode not working

hello, i think this forum is my last hope, i have a tablet and i've been searched the correct rom for it, but is not very commun in the market (DOPO), and i am a very noob in this kind of topics, i tried the recovery mode but now shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the no1, it stays there for hours without anything happening, i guess, i only have the choice to flash the tablet with a rom, but i will apreciate if you guys help me how to find the right way to reinstall my android OS,or find the right OS for my tablet. please, help me
My Tablet:
DOPO Double Power
Model: GS-918
9" multitouch display
8GB Memory
Android 4.1.1 Jelly Bean operating system
1.5GHz Amlogic Cortex A9 dual-core processor
1GB system memory
800 x 480 resolution

sdesignz said:
hello, i think this forum is my last hope, i have a tablet and i've been searched the correct rom for it, but is not very commun in the market (DOPO), and i am a very noob in this kind of topics, i tried the recovery mode but now shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the no1, it stays there for hours without anything happening, i guess, i only have the choice to flash the tablet with a rom, but i will apreciate if you guys help me how to find the right way to reinstall my android OS,or find the right OS for my tablet. please, help me
My Tablet:
DOPO Double Power
Model: GS-918
9" multitouch display
8GB Memory
Android 4.1.1 Jelly Bean operating system
1.5GHz Amlogic Cortex A9 dual-core processor
1GB system memory
800 x 480 resolution
Click to expand...
Click to collapse
Download This File
https://docs.google.com/file/d/0B8YnQA1FX-_yUU1ERXh1TjNUbnc/edit?usp=sharing
Click to expand...
Click to collapse
Install Cwm On your tab with mtk droid tools (search for it on the internet)
Boot into recovery mode....
The file you downloaded must be in your sd card....
Select apply update from sd card...
Choose the zip file....
Click yes....
The phone will boot normally....
do everything at your own risk... don't forget to make a backup of your tab with mtkdroid tools..... I am not responsible for any harm caused to your device
Click to expand...
Click to collapse

N'ayam Amarsh'e said:
Download This File
Install Cwm On your tab with mtk droid tools (search for it on the internet)
Boot into recovery mode....
The file you downloaded must be in your sd card....
Select apply update from sd card...
Choose the zip file....
Click yes....
The phone will boot normally....
Click to expand...
Click to collapse
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
EDIT: ok i run the the .zip file named dopo7088stk and this is what it says:
install/sdcard...
finding update package...
opening update package...
verifying update package...
installation aborted.

sdesignz said:
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
Click to expand...
Click to collapse
Mtkdroid tools only works with mediatek devices (with a mediatek chip eg mt6577, mt6589 etc) so will not work with your device
What actually is wrong with your tablet?

sdesignz said:
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
EDIT: ok i run the the .zip file named dopo7088stk and this is what it says:
install/sdcard...
finding update package...
opening update package...
verifying update package...
installation aborted.
Click to expand...
Click to collapse
Sorry Then i can't help... But you can try to do factory reset from CWM REcovery... If this helps then you can boot normally.. If this too doesn't works then you will have to give it to SVC.....

Sorry Then i can't help... But you can try to do factory reset from CWM REcovery... If this helps then you can boot normally.. If this too doesn't works then you will have to give it to SVC.....
Click to expand...
Click to collapse
but to do a cwm recovery i need the tablet drivers isn't it?
and i don't have them :/
oscarblue48 said:
Mtkdroid tools only works with mediatek devices (with a mediatek chip eg mt6577, mt6589 etc) so will not work with your device
What actually is wrong with your tablet?
Click to expand...
Click to collapse
it freezes in the operating system start logo, or shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the 1, it stays there for hours without anything happening. I already tried using the system recovery but it did not work, i tried with diferent roms but nothing :/, i don't have the warranty paper, i guess i'm ****ed :C

sdesignz said:
but to do a cwm recovery i need the tablet drivers isn't it?
and i don't have them :/
it freezes in the operating system start logo, or shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the 1, it stays there for hours without anything happening. I already tried using the system recovery but it did not work, i tried with diferent roms but nothing :/, i don't have the warranty paper, i guess i'm ****ed :C
Click to expand...
Click to collapse
Can you get into the recovery menu and do factory reset or anything else??
I guess you've tried resetting via the reset button?
There doesn't appear to be a stock rom available for the GS-918 on the Dopo website, have you contacted them to see if they are able to help?
You could try leaving the tablet on when it freezes until the battery runs right down and it turns off, then put it on charge and try it again, not much else I can think of at the moment

oscarblue48 said:
Can you get into the recovery menu and do factory reset or anything else??
I guess you've tried resetting via the reset button?
There doesn't appear to be a stock rom available for the GS-918 on the Dopo website, have you contacted them to see if they are able to help?
You could try leaving the tablet on when it freezes until the battery runs right down and it turns off, then put it on charge and try it again, not much else I can think of at the moment
Click to expand...
Click to collapse
yes i can do everything but it doesn't fix anything :C
and yes, i've tried the ressetting via reset button.
i can swear you there is no dopo GS-918 model drivers or rom in the whole web u.u
I contacted them but they only told me about the recovery menu, and i send them a question but they haven't answered me yet.
((((
now the pc recognizes the tablet via usb, well, it recognized first like vid_1f3a_pid_efe8_driver, then it disappeared and recognized a M3-CHIP driver but with errors (The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver, blabla.)
so i think i need to find the M3-CHIP driver isn't?
EDIT:
I let the battery ran out, and now shows me the box that says: Android is upgrading, Optimizing app 1,2,3,4,5,6,7 of 39, but never pass the 7 now, then i restart the tablet againt, and say: optimizing app 20 of 23, but it freezes,then i restart the tablet... againt, and say: optimizing app 1 of 7, i restart again the tablet, and then it freezes in the first logo forever, the end :C
So, i think one of those last applications is creating the conflict
EDIT 2:
so, now im stuck in the system recovery, i choose reboot system now, and again, i am in System recovery , even if i only press the + volume or -, with the tablet off, it boots automaticly the system recovery :S

sdesignz said:
yes i can do everything but it doesn't fix anything :C
and yes, i've tried the ressetting via reset button.
i can swear you there is no dopo GS-918 model drivers or rom in the whole web u.u
I contacted them but they only told me about the recovery menu, and i send them a question but they haven't answered me yet.
((((
now the pc recognizes the tablet via usb, well, it recognized first like vid_1f3a_pid_efe8_driver, then it disappeared and recognized a M3-CHIP driver but with errors (The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver, blabla.)
so i think i need to find the M3-CHIP driver isn't?
EDIT:
I let the battery ran out, and now shows me the box that says: Android is upgrading, Optimizing app 1,2,3,4,5,6,7 of 39, but never pass the 7 now, then i restart the tablet againt, and say: optimizing app 20 of 23, but it freezes,then i restart the tablet... againt, and say: optimizing app 1 of 7, i restart again the tablet, and then it freezes in the first logo forever, the end :C
So, i think one of those last applications is creating the conflict
EDIT 2:
so, now im stuck in the system recovery, i choose reboot system now, and again, i am in System recovery , even if i only press the + volume or -, with the tablet off, it boots automaticly the system recovery :S
Click to expand...
Click to collapse
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.

oscarblue48 said:
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
Click to expand...
Click to collapse
well i contacted the dopo tech support guy , to see if i can do something else, i guess there is no mucho to do now, maybe i could sell the tablet for parts :C
too bad because i just have 4 months with it, at least i learned something about android, do a f ucking backup and enable debugging mode xd
thanks for all your help and the given support .
I apreciate your replies and now i know a litte bit of this kind of topics .

oscarblue48 said:
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
Click to expand...
Click to collapse
The factory reset on these models (DOPO/nobis/apex) only re-initialize the data/cache partitions it will not touch/fix the system partition.
Based on the gist of the initial post -- the only solution is to send the tablet to the factory so that they can reload the firmware.
I am in the same boat right now...
Originally I had some file system errors on the internal nand (on APEX GS-918) that caused the boot animation to loop endlessly -- because I had 'USB Debugging' enabled' I was able to open a adb shell
and run fsck/e2fsck and fix it.
But I have a similar problem now (possibly due to adding an option in build.prop) and also disabled 'USB Debugging' and
I can no longer use adb to open a shell during the boot logo.
PS: I hate to necro a thread -- but people need to know that the issue, described, is by-design........they want you to send it in the factory.
When doing a factory reset, any respectable stock recovery, should restore the system partition.
PPS: I do not believe you can install and update in the stock recovery that attempts to write to the system partition.
I believe that can only be handled by using various amlogic tools (such as amlogic usb burning tool, which requires the firmware image that we don't have)

Help me unbrick my lenovo A850!

Hey guys! My phone is now a brick. Can anyone show me how to repair the boot for it? Many thanks.

hungtrauvang said:
Hey guys! My phone is now a brick. Can anyone show me how to repair the boot for it? Many thanks.
Click to expand...
Click to collapse
Flash a new rom
Watch this video...

hungtrauvang said:
Hey guys! My phone is now a brick. Can anyone show me how to repair the boot for it? Many thanks.
Click to expand...
Click to collapse
What happens if you power it on while holding down the up and down buttons?

Frogmanstar said:
What happens if you power it on while holding down the up and down buttons?
Click to expand...
Click to collapse
Nothing happens. Really sad.

hungtrauvang said:
Nothing happens. Really sad.
Click to expand...
Click to collapse
This just means you don't have a recovery.. just flash a new rom.

hi XDA community i have a problem regarding my a850 and i hope u or anybody can reply this comment in an instance cuz im in emergency...
IM EXPLAINING MY PROBLEM VERY DETAILED SO IT'S GONNA BE VERY LONG COMPOSITION, INCLUDING FROM IM ROOTING THE PHONE UNTIL I TYPED THIS COMPOSITION
so recently i "Framarooted" my device and was working properly as i expected,then i want to install TWRP, i see my baseband version does not have ROW or CN in there, it kinda like "A850.V13 ...(cant remember)", but i flashed anyway using the ROW version of TWRP and Mobileuncle MTK Tools. When I want to enter recovery (via MTK Tools) it doesnt show up, just stuck at white,big "Lenovo" logo (it probably doesnt work) but i was able to boot back to normal. Then i used System App Remover from Play and attempted to delete some chinese apps, and I DID a mistake... i was so clumsy enough to delete all chinese apps that origins from the rom i accidently deleted the file "classical" (which i guess the entire system ui, launcher etc) . Upon after deletion of that file I SHOULD HAVE NOT DELETE , it suddenly booted off with the startup sound muted halfway (its like, the boot startup sound have like 4 second duration and i heard the sound just for 1 sec).
Then it boots up again, but stuck at the logo "Lenovo For Those Who Do" after startup animation, so i assume this is bootloop or soft brick
Realising this incident i GOOGLED " a850 bootloop","a850 unbrick","a850 stock rom","a850 emergency reset" and "a850 emergency backup", then I found a website which describes how to flash stock rom to a850, so i did that, as it might work, but actually not for my case. I followed and downloaded exactly steps and files from that website and loaded Flashtool with its scatter file, then ticked PRELOAD and selected the preload.img, followed by checking USB mode ,clicking "Forced High Speed", checked the DA DL thingy, clicked Firmware Upgrade and the progress bar moved, after that i plugged my phone, without battery, to the pc via usb. I heard the hardware insert sound, but, Flashtool did not start flashing, it;'s still SEARCHING.
Then I read that u need the USB drivers, so I assume i do not have drivers for this phone. I used the Device Manager step and when I plug my phone, it pops up "MT65xx Preloader"(or MTK i dont remember) then I quickly rightclick and "Update Driver". It has two selections, ONLINE or BROWSE, so i clicked the online solution, but Windows seems cant find the driver i need,
so i used BROWSE option, which i used your usb driver by entering the directory of the driver in your file in "C:\Users\User\Downloads\Compressed\Lenovo_Drivers_SP_Flash_Tool_v3.1316.0.150\Drivers" clicked install then it pops up an error "The third party INF does not contain digital signature information", so it doesnt install. So I used USBDeview and plugged my phone again without battery, it pops up "MT65xx Preloaded" with a purple dot, and if you need, i rightclicked that purple dot and clicked PROPERTIES, and here's information it gave:
Device Name: MT65xx Preloader
Device Type: CDC Data
Description: MT65xx Preloader
Connected: Yes
Safe to Unplug: NO
Disabled: NO
USB Hub: NO
Drive Letter:*blank
Serial Number:*blank
Created Date: 12/10/2014 2:01:15 AM
Last Plug/Unplug Date:12/10/2014 2:01:15 AM
VendorID: 0e8d
ProductID :2000
Firmware Revision : 1.00
USBClass: 0a
USBSubClass:00
USBProtocol: 00
"Hub Port" until "DeviceMfg" is blank
Power: 500mA
USB Version: 2.00
Driver Description: *blank
Driver Version:*blank
Instance ID: USB\VID_0E8D&PID_2000\5&9ec43f0&0&9
After checked, i resorted to HARD RESET via recovery (i tried to go to recovery again to see there's hope in there) and it BOOTED TO RECOVERY! (yay) but again problem strikes, the recovery I see now is FULLY CHINESE i dont understand even a single option i gave there.
So now my phone condition is still cant boot to launcher, and my very last resort is to use the JTAG option
pls help me u all and pls reply ASAP
thank you

irfanadli97 said:
...clicked install then it pops up an error "The third party INF does not contain digital signature information", so it doesnt install.
Click to expand...
Click to collapse
You should log in to windows with out drivers verification in order to install the drivers. Tutorial on how to do than on windows 8 here. Then flashtool should regognize the phone... (you should fix this problem because you may also need it in the future)
There is also a way to fix your phone (if the classic theme is the problem) using ADB. Go to this page and scroll down to ADB method(tutorial) in order to install the classic.apk as a system apk through ADB.
(i am attaching you the apk: View attachment Theme_classic.apk)

Very thanks though cuz this actually solves my problem on my previous devices which doesn't detect upon connection, but I've actually resorted
to do unsoftbrick by a more professional person in my town (he sells and services phones) and it charged me RM50 ($15). Now my phone is back to normal with a rooted state (Chinese superuser app)
Again thanks for replying.
PS:also can somebody redirect me to lenovo a850 modding page? anybody

irfanadli97 said:
Very thanks though cuz this actually solves my problem on my previous devices which doesn't detect upon connection, but I've actually resorted
to do unsoftbrick by a more professional person in my town (he sells and services phones) and it charged me RM50 ($15). Now my phone is back to normal with a rooted state (Chinese superuser app)
Again thanks for replying.
PS:also can somebody redirect me to lenovo a850 modding page? anybody
Click to expand...
Click to collapse
You did good going to a shop...
What do you mean by "Lenovo a850 modding page"?

u know, where rooted users mod their phone with frameworks, custom roms, installing awesome stuff in theirs'
Sent from my Lenovo A850 using XDA Free mobile app

irfanadli97 said:
u know, where rooted users mod their phone with frameworks, custom roms, installing awesome stuff in theirs'
Sent from my Lenovo A850 using XDA Free mobile app
Click to expand...
Click to collapse
This is such a forum

Tried Installing a custom rom using Flashtool. Now the phone can't come and can't be dected by my pc. Installed the Drivers and they Installed. At first first I was having a Brom Error report Now nothing happens when I p,lug the phone.

Hard-bricked 6039Y - User in tears

Hello there
What happened:
I was trying to install Cyanogen 12.1 on my Idol 3 6039Y (4.7") through TWRP, which was unsuccessful because of E: Error executing updater binary in zip and E: Unable to mount /data errors.
I searched for a solution on xda and came across topic 2683787 ("Bootloop + E:unable to mount /data") which seemed to fit my problem, and executed the suggested command in the command line:
Code:
mke2fs -T ext4 /dev/block/mmcblk0p8
It took barely a couple seconds to complete, showed a few square-like characters like unsupported Unicode and "Done." At that point I decided to click on "Reboot to recovery"
That was the last time I saw my idol 3 alive. It never rebooted, not even bootloop or logo.
What I see now:
I think it is hardbricked since pressing the power button or any combination of Power+Volume keys won't do anything. No bootloop, no logo, not even backlight or vibration. No nothing. When I plug it in, the battery icon does not appear either, just the white/blue LED is lit. It cannot boot to recovery and not even to Download mode. But when plugged in to the computer, it appears in Device Manager as Android HS-USB Diagnostics 9006 (COM8)
What I have tried already
I tried long-pressing the power button, Power+Volume Up combination, Power+Volume Up+Volume Down combination etc...
ADB and fastboot don't detect the device because it is turned off.
I tried disconnecting and reconnecting the battery, all of the buttons combinations while plugging the cable, with battery connected and with the battery disconnected.
I tried to flash back to stock with Mobile Upgrade Q (several versions including the latest 5.0) but it stops at 2% after 260 seconds, saying it was unable to read from terminal.
I also tried with Panasonic Eluga EB-90S55EWLv1009.exe (even though it's for the 6045, I am desperate) and it also stops after some minutes, saying "COM8->PC[2] search Disk over time! Please check the handset or driver! (Error code = 40011)"
I have spent the last 12 hours continuously searching for a solution and trying everything that I could think of. I have read all of the other threads about bricked idol 3 but none of them worked for me :crying:
I am desperate and almost in tears, does anyone have an idea of what I could try now ?
Since the phone shows up as a COM port even though it's off, maybe something with QPST's QFIL application ? Can I try to flash something using that ?
Thank you.

Mobile upgrade Q 5.0 is not the latest 5.0.9 is I had the same issues with 5.0.0 you don't have to use the idol 3 specific version which is 5.0.0
Sent from my 6045I using Tapatalk

Thank you for your answer, I have tried with version 5.0.9 on two different PCs, but it still does not work
I get the same error as with previous versions 4.8.7 and 5.0.0:
"Read terminal information failed. Please check the phone status."
It always stops after 4:35 minutes with this error.

are you sure you have a 6039Y? you wrote white/blue led, the 6039Y has only white led
did you pressed the powerbutton over ten seconds? the power button worked so far perfectly? i have earlier deleted even system partitions from my 6039Y, but i was able to turn the phone on everytime.

I have exactly the same problem on 6045i. I was in whatsapp and suddenly the phone turnedinto a black screen. I rebooted it but it only showed the led on, and nothing more, I can't get into recovery or download mode. The PC also recognizes it as Android HS-USB Diagnostics 9006 (COM3). I've tried Mobile Upgrade Q 4.9.2, 5.0.0, 5.0.6 and 5.0.9 and nothing, it keeps showing the error: "There is no greater software version available to upgrade your phone, actual version of your phone is the latest" :'(

Kuryaki said:
I've tried Mobile Upgrade Q 4.9.2, 5.0.0, 5.0.6 and 5.0.9 and nothing, it keeps showing the error: "There is no greater software version available to upgrade your phone, actual version of your phone is the latest" :'(
Click to expand...
Click to collapse
i know it sounds weird but try mobile q again a few days later mobile q is a very poorly written app, it gives this message even when their servers are down a few months ago i wanted to force it to update my 6039Y, so i deleted some system partitions and this lame app told me that there is no greater software version blahblah... in fact their server was down for a few days.
-edit- i've just read again your post, something is wrong, if mobile q gives you this message, your phone is not dead, you should be able to enter in download mode

jani0417 said:
i know it sounds weird but try mobile q again a few days later mobile q is a very poorly written app, it gives this message even when their servers are down a few months ago i wanted to force it to update my 6039Y, so i deleted some system partitions and this lame app told me that there is no greater software version blahblah... in fact their server was down for a few days.
-edit- i've just read again your post, something is wrong, if mobile q gives you this message, your phone is not dead, you should be able to enter in download mode
Click to expand...
Click to collapse
Yep, I know the phone is not enterily dead.... But at this point, I'm still unable to bring it back to life xD.... I'v tried Mobile Upgrade, QFIL, Panasonic Eluga... I've read that the "Android (Qualcomm depending on drivers you have installed on PC) HS-USB Diagnostics 9006 (COMx)" is some kind of Download mode... but I'm just stucked into this for few weeks. If you guys have another solution to this problem, plz plz plz let me know...

Kuryaki said:
Yep, I know the phone is not enterily dead.... But at this point, I'm still unable to bring it back to life xD.... I'v tried Mobile Upgrade, QFIL, Panasonic Eluga... I've read that the "Android (Qualcomm depending on drivers you have installed on PC) HS-USB Diagnostics 9006 (COMx)" is some kind of Download mode... but I'm just stucked into this for few weeks. If you guys have another solution to this problem, plz plz plz let me know...
Click to expand...
Click to collapse
I have the same problem, do you solved?

pablo_23_ said:
I have the same problem, do you solved?
Click to expand...
Click to collapse
Using latest mobile upgrade q? 5.1.7?
Sent from my ZTE A2017U using Tapatalk

Unjustified Dev said:
Using latest mobile upgrade q? 5.1.7?
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
yes, and i get a error message: "There is not greater software version availiable... actual version is the latest"

You know that partitions change from model to model and mmcblk0p8 by default is the MAIN partition for all ( IMEI, etc, etc ). Why the hell you format that!!!??? Probably your error was TWRP version! I think even Mobile Upgrade Q can´t help you, sorry! But we never know... Do you have phone drivers to try Mobile Q?
Good luck!
.
---------- Post added at 03:34 PM ---------- Previous post was at 03:14 PM ----------
Read this:
Return to stock firmware/recovery
https://forum.xda-developers.com/idol-3/help/return-to-stock-firmware-recovery-t3216077
.

4pda.ru/forum/index.php?showtopic=702765&st=80#entry43097800

Your device is corrupt?

i get the "Your device is corrupt" and idk how to boot into the blu spark twrp(i cant get the screen to show). I was on 8.1 and did a system update to 9.0 and i get this error. any ideas? Thanks

bradman117 said:
i get the "Your device is corrupt" and idk how to boot into the blu spark twrp(i cant get the screen to show). I was on 8.1 and did a system update to 9.0 and i get this error. any ideas? Thanks
Click to expand...
Click to collapse
You're going to have to use the MSM Download Tool to flash back to stock to get rid of that message or just ignore it as it doesn't seem to affect anything. There are about 6 or 7 threads on this already. Use the search this forum box and type in device is corrupt.

ajsmsg78 said:
You're going to have to use the MSM Download Tool to flash back to stock to get rid of that message or just ignore it as it doesn't seem to affect anything. There are about 6 or 7 threads on this already. Use the search this forum box and type in device is corrupt.
Click to expand...
Click to collapse
I was watching the youtube video but i cant seem to update my driver. i direct the link to x64

bradman117 said:
I was watching the youtube video but i cant seem to update my driver. i direct the link to x64
Click to expand...
Click to collapse
Make sure you're not using a USB 3.1 port in your pc. A USB 2.0 or 3.0 should work. When I use a 3.1 Port in my PC the software never finds my phone but any other USB port works fine.

delete

I did a troubleshoot and it says " Android bootloader interface cant work properly with 3.0" which i only have 3.0

anyone help please, ive spent all day trying to fix my phone now. after 2-3 hours of trying to get my laptop to see my MSM Download Tool i gave up and went to 9.0.2-PIE-OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9-FASTBOOT and now i cant even boot my phone. I get TWRP flashed but the screen freezes with no touch

bradman117 said:
anyone help please, ive spent all day trying to fix my phone now. after 2-3 hours of trying to get my laptop to see my MSM Download Tool i gave up and went to 9.0.2-PIE-OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9-FASTBOOT and now i cant even boot my phone. I get TWRP flashed but the screen freezes with no touch
Click to expand...
Click to collapse
You don't need MSN tool at all. Uninstall magisk then flash magisk 17.2

something I come across reflashing files onto my bootloader is
"wiping userdata...
CreateProcess failed: %1 is not a valid Win32 application. (193)
error: Cannot generate image for userdata
Press any key to continue . . ."
I have manually wiped my userdata but still get this error

Delete

Found this is another thread, Hope it helps someone. It helped me.
Install Material Terminal from Play Store
Just type in terminal:
su
reboot "dm-verity enforcing"
Hit enter
Phone will reboot and no more corrupt issue in red.

Solved

.

zeroiron said:
Hey guys!
i'm a bloody noob.
i never did something like unbricking my phone or wiping it or flashing it. It was my first time doing something like this because i just hate stock roms nowadays.
to unlocking the bootloader on my phone was no problem. but the problem was, that i updated my phone to adroid 11 and all the files i found in the past (half year ago) was for android 10, i think.
BUT I DIDN'T KNEW THAT BEFORE! I didn't knew that it would cause problems or that i had to be cautions about that.
Whatever. I tried to follow the instructions on this site: https://wiki.lineageos.org/devices/guacamole/upgrade
the twrp site i used was: https://eu.dl.twrp.me/guacamole/
Is the data "https://eu.dl.twrp.me/guacamole/twrp-3.6.0_11-0-guacamole.img.html" from 2021-11-22 know for adroid 11?
Because half year ago, i think, this all didn't work because there was no twrp for adroid 11 outside.
to be honest i don't know if i tried to install something else too in the past. i don't remember anymore.
I stuck half year ago on this bootloop problem. and i didn't worked again on this phone. i thought i could just wait for a new data for android 11 and try it later again.
Later is today but i made i worse!
I downloaded from this site https://download.lineageos.org/guacamole the file:
lineage-18.1-20220227-recovery-guacamole.img
after the command 'fastboot flash boot xxx.img' i reboot my phone.
Now my phone is displaying :
qualcomm crashdump mode
dm-verity device corrupted force dump
kernel-restart
what can i do now?
If i press the sound buttons + off-button i come the the boot screen which says:
blablabla
internetsite
press power button to pause boot
but this display won't stay long enough. after few seconds it's again on this crashdump mode
edit: i think i wiped in the past the whole os. And now? What should i do?
On this MSM Tool my phone isn't recognized. even with newest driver or other cable.
What should i do know? Is my phone lost now?
If some can help me please write exactly down what i should click / download etc.
If someone can german here and knows help, please help me in german. but don't have to. i'm glad if anyone can help me.
Click to expand...
Click to collapse
From what I can gather from your details I would try to get the MSM tool to work, it sounds like a driver issue, just make sure you uninstall previous driver first then go here
https://www.getdroidtips.com/download-qualcomm-qdloader-hs-usb-driver/
and get latest driver , follow all instructions,, also make sure your PC is installing all the optional drivers in the windows update section while your phone is connected to the PC, hth,, good luck