Hello All
I am new at rooting and installing custom ROMS at android.
I tried to root my android mobile (Qmobile A-900, which is a rebranded version of Gionee Elife E3 and was sucessful.
I installed "MTK mobileuncle" app from google play store which would reboot phone to CWM Recovery when i select "recovery update" option.
Next i tried to install a custom Rom and followed each and every step mentioned www . androidspakistan. com/2013/12/miui-v5-for-qmobile-noir-a900. html
"For CWM Recovery i follwed steps mentioned www . androidspakistan. com/2013/09/installing-cwm-recovery-in-qmobile-noir . html
I made by current stock ROM backup file into SD saved in path SDCARD\clockworkmod\backup
Then in CWM recovery mode i selected Format data/factory reset , then Install from ZIP, Select the Downloaded Zip (selected the custom ROM zip which was 383 Mb, the screen then installed and i recieved "sucessfully installed message while in cwm which then said that i should Reboot my phone which i did.
But now i just get my old Stock Rom welcome logo when i boot my phone for 3 sec and then it restarts and the same thing happens again and again.
Please help me if there is any way to solve this problem. "I know its not bricked coz it still displays stock rom logo and starts for a while."
Thanks in advance
I've held the Tecno P5, rooted it and now here is ClockworkMod recovery for the phone.
Note: I'm not responsible for any damage that may occur to your phone!!
You do it at your own risk!!
To install ClockworkMod recovery, the phone has to be rooted. Proceed to this thread to root the Tecno H5
To Install ClockworkMod Recovery
Download CWM Recovery at the bottom of the post and put it at the root of your SD Card (Not in any folder)
Rename recovery image to ‘recovery.img’
Download and install Mobileuncle Tools and install it on your phone
Open Mobileuncle Tools and grant it root permission
Scroll to ‘Recovery Update’
Select ‘recovery.img’
Tap ‘OK’ to confirm
Done.
You can boot into recovery mode (Start phone while holding the Volume Up button) to access new recovery
Hello friend, please, have you tried this on any Tecno P5?
who tested
I tried, and now my phone can't neither factory reset nor boot into recovery.
my phone cant boot to recovery again after i followed the process
[
thread: [ROOT] & [CMW RECOVERY] For Tecno P5
Logged in as developer eto
Tit
Title:
I][/I]
ArnoldGarry256 said:
I've held the Tecno H5, rooted it and now here is ClockworkMod recovery for the phone.
Note: I'm not responsible for any damage that may occur to your phone!!
You do it at your own risk!!
To install ClockworkMod recovery, the phone has to be rooted. Proceed to this thread to root the Tecno H5
To Install ClockworkMod Recovery
Download CWM Recovery at the bottom of the post and put it at the root of your SD Card (Not in any folder)
Rename recovery image to ‘recovery.img’
Download and install Mobileuncle Tools and install it on your phone
Open Mobileuncle Tools and grant it root permission
Scroll to ‘Recovery Update’
Select ‘recovery.img’
Tap ‘OK’ to confirm
Done.plz how do I revert this cause my phone refused to boot to recovery after I did that
You can boot into recovery mode (Start phone while holding the Volume Up button) to access new recovery
Click to expand...
Click to collapse
AndroidExpress said:
who tested
Click to expand...
Click to collapse
i have used it a couple of times
Lol, the warnings are funny, u trying to update ur phone should know the risk thanks anyways
First of all you need to root your xolo era 4g with kingroot.
Here how to root your xolo era 4G.
1. Download Kingroot 4.9.3 (Search it on Google and do not download kingroot 5.x.x or above)
2. Before rooting enable USB debugging and Unlock OEM form Developer option.
3. Root with kingroot and your phone may reboot more than 5 times.
Now steps to install Cynogen recovery after Rooted your xolo era 4g.
1. Download Cynogen recovery from "drive.google.com/open?id=0B7rWS2FCs7IBLXp1Y25MR0FyZjg"
here and extract it .
2. Install Flashify app from Googel Play Store.
3. Open Flashify ,give the root permission and click on Recovery image and choose downloaded recovery.img then YUP! it. (you should backup Stock recovery before flashing cynogen recovery.)
4. You Cynogen recovery may not work, so you may need to mount system RW by an app " Mount /system RO/RW " download it from Google play.
Now steps to remove Kingroot and install SuperSU on Xolo era 4g.
1. Download SuperSU zip from "download.chainfire.eu/696/supersu"
2. Now open Kingroot then go to Setting and Unstall Kingroot , note that do not backup root while unrooting. (untick root backup option)
3. Your phone will automatically restart .
4. Now power off your phone , and open cynogen recovery by pressing Volume UP + Power button.
5. Now click on apply update then choose SuperSU.zip. Then start your phone.
6. SuperSU will be successfully installed.
7. It may ask to update binary then click on update and select is normal update (Do not select TWRP/CWM). The binary will update successfully without any error.
Now you have successfully replaced Kingroot to SuperSU and now you can use Fireflash without any error to flash a zip.
Note that do not flash Stock update by Flashfire such as Marshmallow update.zip. It will Brick your phone. To fix you need to flash stock rom by PC.
You can restore stock recovery by Flashify if you have backup stock recovery and install Marshmallow update from stock recovery.
Thanks.
Here are few names which have same cpu as LYF F1 i.e. Qualcomm Snapdragon 617 Processor:
Alcatel Idol 4,Sharp Aquos 507SH,Kyocera DuraForce Pro,Huawei G9 Lite,ZTE ZMax Pro,BlackBerry DTEK50,ZTE Axon Max,HTC One A9,ZTE Axon 7 Mini,Nubia Z11 Mini,Coolpad Max,Samsung Galaxy C5,Moto G4 Plus,Moto G4.
I have found the stock rom at the link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0".
Can anyone help please?
Good news for all the users of LYF F1 who wants to have twrp and root access.
I found the stock rom at link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0"
I extracted the stock rom and got the stock recovery,then I got the twrp recovery of ZTE Axon 7 Mini.
I ported the twrp by replacing only the zImage from the stock to the twrp,and kept the ramdisk the same in twrp.
It booted up well but I got a error that twrp could not mount any partition except the recovery.
I then got the twrp of Moto G4 Plus,but the twrp did not have the ramdisk,it only contains zImage,so I could not port it.
I then got the twrp of Samsung Galaxy C5 and ported it in the same way,but it put the phone into recovery bootloop,phone was booting into twrp,then switching off,then again booting to twrp,at one moment when phone was switched off for one second,I flashed again the previous working recovery.
I then ported the twrp recovery of ZTE Axon Max but it gave the same error that it could not mount any partition except the recovery.
Then I ported the twrp recovery of ZTE Nubia Z11 Mini and this one was successfull without any error,but the recovery was in chinese.I can not remember the whole thing but the first window appeared in front,I touched the lower right conrer and changed the language to english,since then everything is in english.The link of that recovery is "https://drive.google.com/open?id=0B2iZIwRNj3bpaEl3dWR1eXRsalk" and password is "Created-by-Tarasantan"
Now How did I flashed the twrp,I downloaded and extracted the stock rom,then I found a "_qcMUP.zip" within the zip "LYF F1 LS-5505 TOOL & DRIVERS.zip",then extracted the zip _qcMUP.zip,there in the support folder I found some windows softwares,I ran all of them to install the drivers and neccessary files.
Then in the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder I replaced the stock "recovery.img" with the twrp "recovery.img".And then I ran the "qcMUP.exe" in the _qcMUP folder which I previously extracted.
Now I clicked the do button in the upper right corner of "qcMUP.exe",then clicked upgrade,then I selected the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder.
Now I switched off the phone,then I pressed and hold volume up and down at the same time,and pluged the phone into the computer and the flashing started on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing was going on.
This will clear all the apps and data you previously have had in your internal memory.So you can back up all the installed app with es filexplorer,or super backup,and all the contacts and smses with super backup,then you must move all the backed up things and other neccessary things to the sd card.At the end put the latest supersu.zip in your sd card.
The next part is very important,when flashing is passed,you will unplug the phone from the computer,then press and hold the power and the volume up at the same time.You will be booted up into twrp then somehow change the language to english from chinese,then flash the supersu.zip from your sd card,if you do not boot into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that it does not replace the twrp recovery with the stock.
Alternatively
you can use the following method.I have not tested this method,but this should work.In this method you just need to download this file "TWRP For LYF F1.7z",from https://drive.google.com/open?id=0B2iZIwRNj3bpanRsaUM0OEdYV3c ,password is Created-By-Tarasantan .This recovery is made for exactly LS-5505,that means ro.product.device is LS-5505 ,ro.product.locale is en-IN and other properties are also changed for LS-5505.
Download and Extract the "TWRP For LYF F1.7z" file,then install the given drivers,then run the "qcMUP.exe".
Now Click the do button in the upper right corner of "qcMUP.exe" window,then click upgrade,then select the "LYF F1 LS-5505 TWRP 3.0.2" folder.
Now switch off the phone,then press and hold volume up and down at the same time,and plug the phone into the computer and the flashing should start on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing is going on.
This will not clear any apps and data that you previously have had in your internal memory.So you do not need to back up anything.But you need to put a supersu.zip in your sd card.
The next part is very important,when flashing is passed,unplug the phone from the computer,then press and hold the power and the volume up at the same time.Your phone should be booted up into twrp,then flash the supersu.zip from your sd card,if you do not boot your phone into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that the boot.img does not replace the twrp recovery with the stock one.
Link of a image of the window which will come when you first time boot into twrp
https://drive.google.com/open?id=0B2iZIwRNj3bpbTgySjdfRFZKUzg
Hey i am also have lyf f1 5505 ia want to root plz give me all the recommended links and processs
Plz help the lyf user
hi bro need help
twrp is password protected plz provide password
---------- Post added at 05:28 AM ---------- Previous post was at 05:05 AM ----------
thankyou ls5505 root done .............................................................................
Plz give me password.
plz sir give me password
AyanRangrez said:
plz sir give me password
Click to expand...
Click to collapse
Please Read the full post, password is Created-By-Tarasantan
Sir please give me Lyf f1 twrp password please in am very tensed
Vishul saxena said:
Sir please give me Lyf f1 twrp password please in am very tensed
Click to expand...
Click to collapse
R u being serious read the first post well dear! Or have a glass of water before that then re-read it again! I have mentioned so many times go through the pages! We are here to help you people not serve you! Read the whole topic.
Hii.. I need some help.
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Hello sir thank for the that wonderful information but i want help, i root my phone with help of your process full flash phone with twrp file but now my volte features is gone after flashing i try and remove recovery and flash with original stock rom then reboot normally but still my volte feature not enable i try with *#*#4636#*#* and check setting but there nothing happen i download universel volte patch file download from xda forum patch 1 and patch 2 and install through recovery after reinstall recovery but problem still same before install twrp my airtel sim was work on volte calling+4g but now lte only work no calling i was hide every thing with magiks manager but nothing was solve can u pls help me what should do thanks
Needsupport said:
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Click to expand...
Click to collapse
Yes u can but why u want to unlock when u install twrp recovery everything is in ur control after install magiks manger so many root app will solve many problem
Guys, kindly provide me a latest firmware for ls5505.
Hi there!
Because lack of the development at this device. I try to make a little work for this infamous device.
This is a custom recovery for Infinix Zero 4 based on PhilZ Touch Recovery version 6.59.0. You can use this recovery to flash custom ROMs, root using Magisk or SuperSU and other flashable ZIPs.
[Really] Important - read before flashing
I am not responsible for anything that goes wrong. You are agreed to flash this recovery that will break XOS OTA update, lose warranty and may break your device.
However, I've included stock recovery if you change your mind and want to back to original one.
Instructions:
1. Go to Settings, About Phone, and then tap Software version 10 times. It should now say that you are a developer.
2. Go to Settings, Developer Options. Turn on USB Debugging and Enable OEM Unlock.
3. Install MTK Preloader USB driver, skip if you've already installed this one.
4. Extract PhilZ recovery zip file, and extract
5. Turn off your device.
6. Open SP Flash Tools, locate scatter file to your downloaded zip recovery.
7. Click download, and press VOL DOWN on your device.
8. Turn on your device, press POWER and VOL UP.
9. Your custom recovery has been installed.
Back To Stock
If you decided change your mind by restore stock recovery for reasons such as want to keep your warranty, continue receive OTA update and maybe want to be back on the track, I've also provided stock recovery both Nougat and Marshmallow version.
Download links
PhilZ Touch Recovery
SP Flash Tools
MTK Preloader USB Driver
Stock Recovery (Marshmallow version)
Stock Recovery (Nougat version)
Credit and Thanks
Credit to @Phil3759 for awesome custom recovery
Thanks to Infinix, Mediatek, and you
Reserved
Reserved
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
dayat7man said:
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
Click to expand...
Click to collapse
because the boot isn't patched. you can use Magisk to patch your boot.img and flash it again and it will work.
you can get your boot.img either from your stock ROM where is available at infinixmobility.com or you can use miracle box to extract it from your current installed ROM