Here are few names which have same cpu as LYF F1 i.e. Qualcomm Snapdragon 617 Processor:
Alcatel Idol 4,Sharp Aquos 507SH,Kyocera DuraForce Pro,Huawei G9 Lite,ZTE ZMax Pro,BlackBerry DTEK50,ZTE Axon Max,HTC One A9,ZTE Axon 7 Mini,Nubia Z11 Mini,Coolpad Max,Samsung Galaxy C5,Moto G4 Plus,Moto G4.
I have found the stock rom at the link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0".
Can anyone help please?
Good news for all the users of LYF F1 who wants to have twrp and root access.
I found the stock rom at link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0"
I extracted the stock rom and got the stock recovery,then I got the twrp recovery of ZTE Axon 7 Mini.
I ported the twrp by replacing only the zImage from the stock to the twrp,and kept the ramdisk the same in twrp.
It booted up well but I got a error that twrp could not mount any partition except the recovery.
I then got the twrp of Moto G4 Plus,but the twrp did not have the ramdisk,it only contains zImage,so I could not port it.
I then got the twrp of Samsung Galaxy C5 and ported it in the same way,but it put the phone into recovery bootloop,phone was booting into twrp,then switching off,then again booting to twrp,at one moment when phone was switched off for one second,I flashed again the previous working recovery.
I then ported the twrp recovery of ZTE Axon Max but it gave the same error that it could not mount any partition except the recovery.
Then I ported the twrp recovery of ZTE Nubia Z11 Mini and this one was successfull without any error,but the recovery was in chinese.I can not remember the whole thing but the first window appeared in front,I touched the lower right conrer and changed the language to english,since then everything is in english.The link of that recovery is "https://drive.google.com/open?id=0B2iZIwRNj3bpaEl3dWR1eXRsalk" and password is "Created-by-Tarasantan"
Now How did I flashed the twrp,I downloaded and extracted the stock rom,then I found a "_qcMUP.zip" within the zip "LYF F1 LS-5505 TOOL & DRIVERS.zip",then extracted the zip _qcMUP.zip,there in the support folder I found some windows softwares,I ran all of them to install the drivers and neccessary files.
Then in the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder I replaced the stock "recovery.img" with the twrp "recovery.img".And then I ran the "qcMUP.exe" in the _qcMUP folder which I previously extracted.
Now I clicked the do button in the upper right corner of "qcMUP.exe",then clicked upgrade,then I selected the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder.
Now I switched off the phone,then I pressed and hold volume up and down at the same time,and pluged the phone into the computer and the flashing started on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing was going on.
This will clear all the apps and data you previously have had in your internal memory.So you can back up all the installed app with es filexplorer,or super backup,and all the contacts and smses with super backup,then you must move all the backed up things and other neccessary things to the sd card.At the end put the latest supersu.zip in your sd card.
The next part is very important,when flashing is passed,you will unplug the phone from the computer,then press and hold the power and the volume up at the same time.You will be booted up into twrp then somehow change the language to english from chinese,then flash the supersu.zip from your sd card,if you do not boot into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that it does not replace the twrp recovery with the stock.
Alternatively
you can use the following method.I have not tested this method,but this should work.In this method you just need to download this file "TWRP For LYF F1.7z",from https://drive.google.com/open?id=0B2iZIwRNj3bpanRsaUM0OEdYV3c ,password is Created-By-Tarasantan .This recovery is made for exactly LS-5505,that means ro.product.device is LS-5505 ,ro.product.locale is en-IN and other properties are also changed for LS-5505.
Download and Extract the "TWRP For LYF F1.7z" file,then install the given drivers,then run the "qcMUP.exe".
Now Click the do button in the upper right corner of "qcMUP.exe" window,then click upgrade,then select the "LYF F1 LS-5505 TWRP 3.0.2" folder.
Now switch off the phone,then press and hold volume up and down at the same time,and plug the phone into the computer and the flashing should start on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing is going on.
This will not clear any apps and data that you previously have had in your internal memory.So you do not need to back up anything.But you need to put a supersu.zip in your sd card.
The next part is very important,when flashing is passed,unplug the phone from the computer,then press and hold the power and the volume up at the same time.Your phone should be booted up into twrp,then flash the supersu.zip from your sd card,if you do not boot your phone into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that the boot.img does not replace the twrp recovery with the stock one.
Link of a image of the window which will come when you first time boot into twrp
https://drive.google.com/open?id=0B2iZIwRNj3bpbTgySjdfRFZKUzg
Hey i am also have lyf f1 5505 ia want to root plz give me all the recommended links and processs
Plz help the lyf user
hi bro need help
twrp is password protected plz provide password
---------- Post added at 05:28 AM ---------- Previous post was at 05:05 AM ----------
thankyou ls5505 root done .............................................................................
Plz give me password.
plz sir give me password
AyanRangrez said:
plz sir give me password
Click to expand...
Click to collapse
Please Read the full post, password is Created-By-Tarasantan
Sir please give me Lyf f1 twrp password please in am very tensed
Vishul saxena said:
Sir please give me Lyf f1 twrp password please in am very tensed
Click to expand...
Click to collapse
R u being serious read the first post well dear! Or have a glass of water before that then re-read it again! I have mentioned so many times go through the pages! We are here to help you people not serve you! Read the whole topic.
Hii.. I need some help.
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Hello sir thank for the that wonderful information but i want help, i root my phone with help of your process full flash phone with twrp file but now my volte features is gone after flashing i try and remove recovery and flash with original stock rom then reboot normally but still my volte feature not enable i try with *#*#4636#*#* and check setting but there nothing happen i download universel volte patch file download from xda forum patch 1 and patch 2 and install through recovery after reinstall recovery but problem still same before install twrp my airtel sim was work on volte calling+4g but now lte only work no calling i was hide every thing with magiks manager but nothing was solve can u pls help me what should do thanks
Needsupport said:
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Click to expand...
Click to collapse
Yes u can but why u want to unlock when u install twrp recovery everything is in ur control after install magiks manger so many root app will solve many problem
Guys, kindly provide me a latest firmware for ls5505.
Related
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
Installing Clockworkmod Recovery on your Alcatel Onetouch Flash 6042D means that you will be able to flash new custom ROMs on it. Without custom recovery you cannot flash new ROMs. Also, it should be installed on rooted devices. Clockworkmod Recovery can also be used to backup your entire ROM.
WARNING: Installing a recovery may brick your phone...Don't Blame Me.. Do at your Own Risk...
Note:- Alcatel OneTouch Flash Recovery Uses a secured boot.img,so a custom recovery will cause boot loop..Please Download and Flash The unsecured boot.img from below link. And flash it with recovery..
You need:
1. A Windows PC
2. CWM recovery (Download)
3. Unsecured Boot.img (Download)
4. SP Flash tools (Download)
5. Driver (Download)
6. Scatter file (Download)
7.Alcatel Onetouch Flash 6042D
Follow these steps to flash custom recovery using sp flash tools:
Step 1: Extract/unzip all downloaded files.
Step 2: Open SP flash tool and load scatter file.
Step 3: Unselect all blocks and select only RECOVERY and BOOT.
Step 4: Click the location column of RECOVERY and BOOT and select downloaded
recovery and boot.
Step 5: Press and Volume Down + Power to Enter in CWM Recovery Mode.
If you face any problem contact me at facebook.....:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Biman94 said:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Click to expand...
Click to collapse
Thanks for your review...
i am currently working on AICP ROM 5.1.1..
I will upload it within 2 days...
Be Tuned....:highfive: :highfive: :highfive:
Okkk
I am waiting for it...
connecting in sp flash & mtk droid tools.
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Solution of your problem....
pinakini said:
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Click to expand...
Click to collapse
I recomend u to go to this link to solve your Spft problem...
and i think u must download your stock rom instead of making backup...
after this problem solved try to flash unsecured boot.img first..
then u can try flashing My CWM recovery or Philz Recovery
(philz recovery can be found here...)
and got to this link
you can understand what is your problem connecting in mtk driod tool...
I think u must flash it.. because its the problem of your phone...
and if u face any problem contact me or for instant help just take the help of Google BABA!!!...
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
pinakini said:
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
Click to expand...
Click to collapse
Here Check This Website......
After that I hope U can Understand your problem.....
Then Uninstall any previous driver installed of your phone on your pc....
then install the driver mention above....
and after that if the problem remains try to download and install proper adb driver by this....
Hello
I own a Huawey Y6 SCL-L21 dual sim and last night i try to install a custom rom and problems are:
-First of all i unlocked bootloader and FRP
-Flashed TWRP with Adb
-Download custom rom and gapps and put on sd
-Boot in TWRP and....... wipe my internal storage cache and davlik without make a backup....i know my bad(
-Then i just go to install and try install rom (Cyanogenn 12.1) and after 3 seconds stops and its say this package is for device: y6; this device is Honor4a
"E:Error executing updater binary in zip ' /sdcard/cm-12.1-2016514-UNOFFICIAL-Y6.ZIP' Error flashingzip
-I try all custom roms for my Y6 from XDA and i just get same error for all of them
-Now the real problem is because i didnt make backup befor wipe all data now i just dont have any rom installed on my device and i cant use it
-Now i just want go back at stock rom via update.app firmware downloaded from Huawei and because i have custom recovery TWRP i cant flash it
Please help me replace TWRP with stock recovery because i want install stock rom again.
Sorry for my english i hope u guys can understand me and help.
Thnx in advance.
AndroMen said:
Hello
I own a Huawey Y6 SCL-L21 dual sim and last night i try to install a custom rom and problems are:
-First of all i unlocked bootloader and FRP
-Flashed TWRP with Adb
-Download custom rom and gapps and put on sd
-Boot in TWRP and....... wipe my internal storage cache and davlik without make a backup....i know my bad(
-Then i just go to install and try install rom (Cyanogenn 12.1) and after 3 seconds stops and its say this package is for device: y6; this device is Honor4a
"E:Error executing updater binary in zip ' /sdcard/cm-12.1-2016514-UNOFFICIAL-Y6.ZIP' Error flashingzip
-I try all custom roms for my Y6 from XDA and i just get same error for all of them
-Now the real problem is because i didnt make backup befor wipe all data now i just dont have any rom installed on my device and i cant use it
-Now i just want go back at stock rom via update.app firmware downloaded from Huawei and because i have custom recovery TWRP i cant flash it
Please help me replace TWRP with stock recovery because i want install stock rom again.
Sorry for my english i hope u guys can understand me and help.
Thnx in advance.
Click to expand...
Click to collapse
Bro , Download Stock Rom For Your Model . Then extract recovery image file using Huawei Update Extractor Tool
And follow the same steps for flashing stock recovery as you flashed the TWRP recovery
SmartDrevil said:
Bro , Download Stock Rom For Your Model . Then extract recovery image file using Huawei Update Extractor Tool
And follow the same steps for flashing stock recovery as you flashed the TWRP recovery
Click to expand...
Click to collapse
Thnx m8.
Btw i figured out how to flash Huawei stock recovery and then update.app.
Phone it's just like new out of box:laugh::laugh::laugh:
*Note*-Please Use this Method Only On ROW Rom Version.Flashing On CN Rom May Brick your Device.......
First Download ROM and Save it to Root Directory (link below)
1. Go to Play Store and Download Official TWRP app
2. Download recovery.img (link below) and Flash Using TWRP app
3. Completely Switch Off Your Phone wait for 10 secs. Now Press Both Volume Key(VOL+ and VOL-) and Power Key together.
It Will Boot you In Recovery Mode.
4. Make Backup Of Current Rom By Clicking on Backup Button
5. after making backup Clear/Format cache,Format data ,Format system(don't select internal memory)
6. Now Click On Install and Select Install zip file from SD Card(that you downloaded)and Swipe For Flashing.
it will take 5 Minutes For Install and 5 Minutes For 1st Boot
7. Enjoy
Downloads-
ROM- goo.gl/TEwZL1
TWRP (recovery.img)- goo.gl/Fgj9b4
*Use at Your Own Risk*
after flash twrp recovery img..... accidentally i click on FASTBOOT MODE.......
after flash twrp recovery img..accidentally i click on FASTBOOT MODE.......
THEN IT ONLY SHOWS =>FASTBOOT mode..... n my lenovo s850 is not opening.
please help me to get back my phone .
Solution
Wait till battery drains to 0% or you can try this method- goo.gl/Ww31cm . Reply if still problem not solved... Don't panic
Solved
TufelRT said:
Wait till battery drains to 0% or you can try this method- goo.gl/Ww31cm . Reply if still problem not solved... Don't panic
Click to expand...
Click to collapse
thanxx a lot...btw cant download the miui 8 from the above link......and is it stable ...kindly please inform.
N is there any other stable custom rom for lenevo s850 ?
i wanna use android naught
please help.
Checked
I've checked link and it is working properly. ROM is Weekly beta. I've seen nougat ROM for s850 but I didn't tested...
Eror
In my s850 it was saying unable to execute update binary in zip ? it was not coming pls say a solution for this
Please Download zip file from my link given in thread....
Hi there!
Because lack of the development at this device. I try to make a little work for this infamous device.
This is a custom recovery for Infinix Zero 4 based on PhilZ Touch Recovery version 6.59.0. You can use this recovery to flash custom ROMs, root using Magisk or SuperSU and other flashable ZIPs.
[Really] Important - read before flashing
I am not responsible for anything that goes wrong. You are agreed to flash this recovery that will break XOS OTA update, lose warranty and may break your device.
However, I've included stock recovery if you change your mind and want to back to original one.
Instructions:
1. Go to Settings, About Phone, and then tap Software version 10 times. It should now say that you are a developer.
2. Go to Settings, Developer Options. Turn on USB Debugging and Enable OEM Unlock.
3. Install MTK Preloader USB driver, skip if you've already installed this one.
4. Extract PhilZ recovery zip file, and extract
5. Turn off your device.
6. Open SP Flash Tools, locate scatter file to your downloaded zip recovery.
7. Click download, and press VOL DOWN on your device.
8. Turn on your device, press POWER and VOL UP.
9. Your custom recovery has been installed.
Back To Stock
If you decided change your mind by restore stock recovery for reasons such as want to keep your warranty, continue receive OTA update and maybe want to be back on the track, I've also provided stock recovery both Nougat and Marshmallow version.
Download links
PhilZ Touch Recovery
SP Flash Tools
MTK Preloader USB Driver
Stock Recovery (Marshmallow version)
Stock Recovery (Nougat version)
Credit and Thanks
Credit to @Phil3759 for awesome custom recovery
Thanks to Infinix, Mediatek, and you
Reserved
Reserved
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
dayat7man said:
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
Click to expand...
Click to collapse
because the boot isn't patched. you can use Magisk to patch your boot.img and flash it again and it will work.
you can get your boot.img either from your stock ROM where is available at infinixmobility.com or you can use miracle box to extract it from your current installed ROM