Related
Hello, this is what I've tried:
1.Root YunOS with "framaroot.apk" --> no success (so I can't flash a new recovery with "Mobileuncle_MTK_Tools 20140111v2.9.9.apk")
2.Root the phone with program --> no success (certainly it's because there is no usb debugging mode in Aliyun OS).
3.Flash the phone with "MTK flashtool" (Sp flash tool) --> I can only flash the original AliYunOS rom in download mode.
http://forum.xda-developers.com/showthread.php?t=1982587
with Android roms I get the scatter file problem: "pmt changed for the rom it must be downloaded"
http://www.needrom.com/phone-roms/umi/umi-cross/
3.1.Replace the recovery in the Yunos rom with the cwm recovery and flash only the recovery --> playing with the battery, I saw the cwm recovery one time for 2 seconds but the phone continue the starting procedure. Afther that I can only access the Yunos testing recovery.
3.2.Replace the scatter file from an Android rom with the scatter file from Aliyunos and flash with Android rom --> phone still booting for more than 15 minutes. So I flashed the yunos rom again.
4.Flash an Android rom with Sp flash tool in "firmware update mode" --> problem with the preloader: bricked phone. I flashed the yunos rom again to save the phone.
5.Install ADB drivers then launch "MtkDroidTools" --> Android adb device not found error (so apparently I can't create a scatter file with MtkDroidTools).
What other options are available? I'm in dispute with the seller because the phone was supposed to be in Android version with multilingual and Google play.
Thank you for proposing a debut of solution.
A 150. Technology exam? Or enjoyable product
Omg... Please tell me there's a less complicated way. I just won a umi cross on eBay for half the retail but reading this i gear my enjoyment ended there. The seller days out comes with Android 4.2 i know nothing of Alyn can you install play store or other store? Is it possible to use the phone if it is Android in a simple way or do i now have home work to do? Oi, how do i even root the device or connect to a computer, I'm panicked please advise on lay mens terms.....
Partitions problem
In Sp flash tool, I did a format+download to avoid the "pmt changed for the rom it must be downloaded" error. I installed this rom (the flashable version):
needrom.com/mobile/umi-cross-c1/
But there are 2 problems:
1. the IMEI are invalid with this Android rom --> should be resolved with "Mobileuncle_MTK_Tools" (but I didn't try, because of the 2nd problem)
2. the partitions are not right: 5GB for the applications and 1.3GB for internal SDcard. In Aliyun I have 25GB storage.
So I flash it again with the Aliyun OS rom:
needrom.com/mobile/umi-cross
I read that there could be problems with "SP flash tool" using version 3.x with scatter file bigger than 1KB or using version 5.x with scatter files less than 1KB. For me only SP flash tool 5.x works good.
So if someone have a suggestion to try to solve the storage partition problem, I'll be very happy. Thanks in advance.
Bye Bye YunOS
Hello, to solve the storage partition problem, just erase the internal SD: the 23GB are back.
For the IMEI are invalid problem, install "Mobileuncle_MTK_Tools":
youtube.com/watch?v=4gRAlf--D8E
Sim1: at+egmr=1 7 "35xxxxxxxxxxxxx"
Sim2: at+egmr=1 10 "35xxxxxxxxxxxxx"
Start imei by 35 or 36 (total 15 digits)
but before I needed to flash an other ROM with the recovery cause the "settings" crashes.
The phone is working good now with android, the only small problem is that you need to enter the IMEI after every "factory restore".
Greetings
pixel9 said:
In Sp flash tool, I did a format+download to avoid the "pmt changed for the rom it must be downloaded" error.
Click to expand...
Click to collapse
This information solved my "pmt changed for the rom it must be downloaded" error. I was able to successfully flash my phone that I have been struggling with for a week and a half. Thank you!
hello every one... i had this problom and i fixed it, i see lots of peeple having this problom
i hope this saves some one else's 3 day of life !!!!!!! My phone was MT6572
"" MTK ONLY ""
Your device doesn't detect simcard?
you flashed your phone and it can't connect to gsm networks?
is your phone stuck on airplane mode and you can't tun air plane mode off??
you can't change imei?
in MTK Droid tools you get these errors??
Baseband v: -----
and even when you root your device you get this error?
--- ERROR : pttycmd1 device NOT found!
you get this error in IMEI&SN write tool?
Enter to ModemMeta Fail
there is no CMS menu in unclemobile tools?!!
i had this problom before... and i spend 3 days on it !!!
first of all you need to have all of the MTK drivers!
i have links to some of them...
http://www.4shared.com/get/0MvyztbR/usb_driver_MT65xx_Android_ZTE_.html
CDC drivers! http://www.4shared.com/get/-7DgNbgM/Android_Mtk_CDC_Driver.html
if you need a driver just search in google !!
You need this programs too "windows"
SP FLash tool (last version) http://forum.xda-developers.com/showthread.php?t=2650125
MTK Droid Tools & Root (last version) http://forum.xda-developers.com/showthread.php?t=2160490
And you need your phones "secro.bin" file ! its so tiny...
i will attach my mobile secro.bin file in compressed format! "MT6572"
sorry my net speed is very low, i can't upload step by step movie or other things...
so .. when you installed all of the drivers and apps you must be ready to go!
1-open the SP Flash tool...
2-select your phones "Android_scatter.txt" file (it's in the offical flash file "rom" for your phone)
if you'r phone boots up ok skip to the 6
3-Format your phone "WARNING!! DON'T FORMAT BOOTLOADER"
3.1 press start
3.2 turn off your phone
3.3 press start
3.4 connect your phone
3.5 wait for the process to compleate
3.6 remove USB cable from the phone
4- Go in download mode
4.1 load the scatter from offical flash (you already did i think?)
4.2 Press start
4.3 turn off your phone
4.4 connect usb cable to your phone
4.5 wait for the process to compleate...
4.6 remove the usb cable
5- if you want to do something with the mount screapt or ect... its for the best that you do it now
6- in SP flash tool uncheck every thing
6.1 check SEC_RO
6.2 click on the location area of the SEC_RO
6.3 select your own SECRO.bin or NODL_SECRO.bin
6.4 click download
6.5 turn off your phone
6.6 connect your phone usb to pc
6.7 wait for the process to complete
7- boot up your phone. you can now aces to GSM/WCDMA/LTE or ect... networks but your imei is invalid !
here the things now you can do that before you couldn't do:
8- go to MTK Droid tools and root
now you can see Baseband v is not empty
Root Your Phone if you didn't
9- Select ROOT in MTK TOOLS
10-in your phone allow super user or super su
when the light in the app turned green you are ready to pull the new imei to your phone
"its for the best that you use an old phone imei"
select IMEI/NVRAM
insert the new imei(s) and ok....
10- reboot your phone and see the imei *#06# it is ok now :victory:
if i helped you press THANKS :good: button
First of all: Instructions very unclear!
Second of all: Doesn't work for all the MTK phones. On my Jiayu S3A it didn't work. From a few days ago I can't connect to Orange (but to Vodafone as an example, I can), and this didn't solve the problem.
madalyn17 said:
First of all: Instructions very unclear!
Second of all: Doesn't work for all the MTK phones. On my Jiayu S3A it didn't work. From a few days ago I can't connect to Orange (but to Vodafone as an example, I can), and this didn't solve the problem.
Click to expand...
Click to collapse
1-thanks
2-i dont know ur phone, if i know i could help you
if ur problem didnt solve, give me details and i will help u
--- ERROR : pttycmd1 device NOT found!
Hey dude im facing this error after writing imei..
Mr.Ak said:
--- ERROR : pttycmd1 device NOT found!
Hey dude im facing this error after writing imei..
Click to expand...
Click to collapse
Flash the secro.bin file with sp-flashtoo, that shuld fix it. If the secro.bin file i did upload didnt work for you find the one that is for your device in its backup (from backup that u take from ur device before) or flash files for sp-flashtool (from internet)
Sent from my SM-G360H using XDA Forums
thank you very much
genius method !!
a google search brought me back here, and now i see.. my english was pretty terrible back then.
it works?
This guide is applicable for hard bricked Coolpad Dazen 1 with Qualcomm HS-USB QDloader 9008, no fastboot, no led on charging, dead phone.
I am writing this guide as simple as can be for all. I no longer own this device.
DISCLAIMER: I have personally revived my Coolpad Dazen 1 (8297L-I00) using this method and tested it twice by hardbricking and unbricking my device before posting it here. I bear no responsibility of whatever that happens to your device/sdcard/computer by using this guide.
What will you need?
• A dead Coolpad Dazen 1 (8297L-I00)
• A PC/Laptop.
• A 2GB or above MicroSD Card. (2GB would suffice)
• Win32DiskImager
• eMMC image of Coolpad Dazen 1. Download
• Stock Rom with flash tools & drivers. Download
• A little brain and common sense.
Steps:
• Connect your MicroSD card to PC in mass storage mode using any card reader or old phone which supports mass storage mode.
• Format your MicroSD card in FAT32 format, quick format will work.
• Extract Coolpad Dazen 1 eMMC image to a folder. It will be of 200MB after extracting.
• Install Win32DiskImager and write Coolpad Dazen 1 eMMC image to your MicroSD card. Kindly select the right drive letter for your SD card otherwise your will severely damage any other drive or your PC hard disk.
• After successful completion of writing eMMC backup image to SD card, insert the MicroSD card in your device and remove all sim cards. Insert battery into your device now. Do not power it on yet.
• Now you can boot to fastboot mode with the eMMC image on SDCARD.
• Connect your phone in fastboot mode, steps for which are : -
A. Press and hold the Volume Up key
B. With the Volume Up key, connect the phone to your PC/Laptop with USB cable
C. Press volume up to confirm on the first screen.
• Now you can flash the stock firmware with ygdp tools. (There's plenty of guide for flashing with YGDP tools. Google is your friend)
• DO NOT disconnect the device during flashing procedure.
• After the flashing procedure is completed, disconnect the USB cable, remove the microSD card and boot the phone normally by long pressing the Power button.
Your Coolpad Dazen 1 is unbricked now.
Credits:
Jimmyz0r@Xda for his thread so I can copy paste some steps from there.
AndroidMTKSite for Stock Rom and Flash Tools
You for trying this guide.
Me for making this guide and creating eMMC backup.
zardaman said:
This guide is applicable for hard bricked Coolpad Dazen 1 with Qualcomm HS-USB QDloader 9008, no fastboot, no led on charging, dead phone.
I am writing this guide as simple as can be for all. If any queries, just post it on the comment section.
DISCLAIMER: I have personally revived my Coolpad Dazen 1 (8297L-I00) using this method and tested it twice by hardbricking and unbricking my device before posting it here. I bear no responsibility of whatever that happens to your device/sdcard/computer by using this guide.
What will you need?
• A dead Coolpad Dazen 1 (8297L-I00)
• A PC/Laptop.
• A 2GB or above MicroSD Card. (2GB would suffice)
• Win32DiskImager
• eMMC image of Coolpad Dazen 1. Download
• Stock Rom with flash tools & drivers. Download
• A little brain and common sense.
Steps:
• Connect your MicroSD card to PC in mass storage mode using any card reader or old phone which supports mass storage mode.
• Format your MicroSD card in FAT32 format, quick format will work.
• Extract Coolpad Dazen 1 eMMC image to a folder. It will be of 200MB after extracting.
• Install Win32DiskImager and write Coolpad Dazen 1 eMMC image to your MicroSD card. Kindly select the right drive letter for your SD card otherwise your will severely damage any other drive or your PC hard disk.
• After successful completion of writing eMMC backup image to SD card, insert the MicroSD card in your device and remove all sim cards. Insert battery into your device now. Do not power it on yet.
• Now you can boot to fastboot mode with the eMMC image on SDCARD.
• Connect your phone in fastboot mode, steps for which are : -
A. Press and hold the Volume Up key
B. With the Volume Up key, connect the phone to your PC/Laptop with USB cable
C. Press volume up to confirm on the first screen.
• Now you can flash the stock firmware with ygdp tools. (There's plenty of guide for flashing with YGDP tools. Google is your friend)
• DO NOT disconnect the device during flashing procedure.
• After the flashing procedure is completed, disconnect the USB cable, remove the microSD card and boot the phone normally by long pressing the Power button.
Your Coolpad Dazen 1 is unbricked now.
Credits:
Jimmyz0r@Xda for his thread so I can copy paste some steps from there.
AndroidMTKSite for Stock Rom and Flash Tools
You for trying this guide.
Me for making this guide and creating eMMC backup.
Click to expand...
Click to collapse
i got my screen back now, but in device manager it detect as unknown device, i tried so many drivers, but no luck
without battery i get "coolpad andriod bootloader interface" in device manager, but cant flash with ygpd, and then i try the same method of reviving coolpad flashing recovery.img or system.img
target reported max download size of 268435456 bytes,
erasing 'system'...
FAILED (remote: Partition table doesn't exist)
what to do now?? please help
ngaia said:
without battery i get "coolpad andriod bootloader interface" in device manager, but cant flash with ygpd, and then i try the same method of reviving coolpad flashing recovery.img or system.img
target reported max download size of 268435456 bytes,
erasing 'system'...
FAILED (remote: Partition table doesn't exist)
what to do now?? please help
Click to expand...
Click to collapse
I would suggest you first uninstall all drivers with USBDEVIEW and restart your pc in test mode. to restart in test mode, open command prompt and type
Bcdedit.exe -set TESTSIGNING ON
then restart your pc, you will see test mode watermark in bottom right corner of the monitor. Reinstall coolpad usb drivers, after that you can flash your mobile with Ygdp tool again.
To flash with ygdp tool your phone has to be in download mode, to do that press volume up in power off state and insert usb cable, you will see a confirmation screen. press volume up to confirm and you are good to go.
Hope it helped.
my coolpad dazen 1 is dead i think
my coolpad dazen 1 was bricked when i applied my miui update and after that i used ur method and while flashing it struck at 33% and after that i am not able to switch on my phone whenever i coonect the phone through usb its led light turns red and it starts vibrating but no luck how can i get my device back to life please tell in a serious danger
awsomehacker said:
my coolpad dazen 1 was bricked when i applied my miui update and after that i used ur method and while flashing it struck at 33% and after that i am not able to switch on my phone whenever i coonect the phone through usb its led light turns red and it starts vibrating but no luck how can i get my device back to life please tell in a serious danger
Click to expand...
Click to collapse
Sorry for the late reply. I'm offline for a while due to personal matters. Did you follow the step EXACTLY as mentioned?
Try redoing all the steps and if not successful. You may contact me personally on whatsapp. I'll pm you my number if necessary.
Pls contact me as soon as possible
My no is 9818195778
thanku so much
thnk u so much buddy.... i got my coolpad dazen 1 back .....its working awesome....
Not getting anywhere
Its still showing qualcomm HSqdloader mode
Plz help me out
Can you provide qfil(qpst) files
coolpad dazen 1 dead pls help me pls
I have coolpad dazen 1...and I root my coolpad dazen 1 phone and install miui after this I have got one update of miui when I start to update my phone my phone is dead and no vibration or no signal...its totally dead what can I do I want my coolpad dazen 1 back pls help me...:crying::crying::crying::crying::crying::crying::crying::crying:
Coolpad Dazen 8297L not working
I am trying to install the stock rom to the device using YGDP Tool. While processing it getting error at 11%. Yesterday the error was in progress of Cell 0. Today it showing in Cell 1. Please help.
Thanks
Vijesh
hi, after following this procedure I am still not able to get my IMEI numbers back ,
its showing both imei as null .. while dialing *#06# ,
so can you backup your EFS partition and share with me plz ... i m in big trouble ... warranty also exceed so cant go to service center
Coolpad 8297-t01 error
i have coolpad 8297-T01 and i have tried flashing it using ygd tool but all i get is error. all drivers are ok but i dont know what next. help pls
Superb brother my dazen got life again.
I've lost hope on the device but got it back.
You have done an awesome work brother.
I tried to do this but doesnt works out any suggestions just forming 9008 port
rahul_rocks3 said:
I tried to do this but doesnt works out any suggestions just forming 9008 port
Click to expand...
Click to collapse
Bro first download ygdp tool and stockfiirmware of dazen 1from above links. And install eMMC image into a 2gb micro sd card using win32disk image writer. then insert sd card in phone and connect it to computer through usb by pressing volume +key. youll get bootliader screen defenetly. Then continue flashing through YGDP Tool. Your phone will come back to life.
---------- Post added at 09:22 AM ---------- Previous post was at 09:18 AM ----------
zardaman said:
This guide is applicable for hard bricked Coolpad Dazen 1 with Qualcomm HS-USB QDloader 9008, no fastboot, no led on charging, dead phone.
I am writing this guide as simple as can be for all. If any queries, just post it on the comment section.
DISCLAIMER: I have personally revived my Coolpad Dazen 1 (8297L-I00) using this method and tested it twice by hardbricking and unbricking my device before posting it here. I bear no responsibility of whatever that happens to your device/sdcard/computer by using this guide.
What will you need?
â?¢ A dead Coolpad Dazen 1 (8297L-I00)
â?¢ A PC/Laptop.
â?¢ A 2GB or above MicroSD Card. (2GB would suffice)
â?¢ Win32DiskImager
â?¢ eMMC image of Coolpad Dazen 1. Download
â?¢ Stock Rom with flash tools & drivers. Download
â?¢ A little brain and common sense.
Steps:
â?¢ Connect your MicroSD card to PC in mass storage mode using any card reader or old phone which supports mass storage mode.
â?¢ Format your MicroSD card in FAT32 format, quick format will work.
â?¢ Extract Coolpad Dazen 1 eMMC image to a folder. It will be of 200MB after extracting.
â?¢ Install Win32DiskImager and write Coolpad Dazen 1 eMMC image to your MicroSD card. Kindly select the right drive letter for your SD card otherwise your will severely damage any other drive or your PC hard disk.
â?¢ After successful completion of writing eMMC backup image to SD card, insert the MicroSD card in your device and remove all sim cards. Insert battery into your device now. Do not power it on yet.
â?¢ Now you can boot to fastboot mode with the eMMC image on SDCARD.
â?¢ Connect your phone in fastboot mode, steps for which are : -
A. Press and hold the Volume Up key
B. With the Volume Up key, connect the phone to your PC/Laptop with USB cable
C. Press volume up to confirm on the first screen.
â?¢ Now you can flash the stock firmware with ygdp tools. (There's plenty of guide for flashing with YGDP tools. Google is your friend)
â?¢ DO NOT disconnect the device during flashing procedure.
â?¢ After the flashing procedure is completed, disconnect the USB cable, remove the microSD card and boot the phone normally by long pressing the Power button.
Your Coolpad Dazen 1 is unbricked now.
Credits:
[email protected] for his thread so I can copy paste some steps from there.
AndroidMTKSite for Stock Rom and Flash Tools
You for trying this guide.
Me for making this guide and creating eMMC backup.
Click to expand...
Click to collapse
Really fantastic work Brother. I was able to revive my phone successfully. Thank you so much for your contribution. Espescially eMMC image.
Hallo Mr zardaman,
I have got 2 Coolpad 8297L-100, which are dead and only shows Qualcomm HS-USB QDloader 9008 driver and no f No Fastboot.
I follow your instruction but do not get success.
It does not come into fastboot mode as well as shows Qualcomm HS-USB QDloader 9008 driver only with sd card(written your file).
Please help...........
Is there any file to flash with QFIL.?????????
my coolpad device got bricked up while i am trying to do flashboot.img now i cant able to swith on it
when ever i try to switch on it, it is saying that download and install the package? this may expose the device to faults and hidden troubles
nothing is happening latter help me to solve this problem
thanks bro thanks you soo much
Hey. i followed the steps correctly. But when using ygdp tool, the flashing got stopped at 72%... now phone is really dead.. there is nothing on the screen now.. when connected to usb the LED lights up for few seconds and bootloader is not showing... It keeps on vibrating when tries to power on.... what do i do..?/? pls help.
i have Micromax unite 2 , thats a mediatek device
installed custom recovery TWRP V3
when am doing this in twrp
1. Install zip
2. Wipe/ advanced /format
3. ADB side loading failed
4. fix permissions
5. Mount > unable to select system/cache/data
6. Restore
7. Partition external sd card i didn't tried
I am getting this errors
E: Unable to mount '/system'
E: Unable to mount '/cache'
E: Unable to mount '/data'
Unable to mount storage
after searching a lot on web i didn't find anything useful even though some are mentioning it as "big deep problem n something related to motherboard etc.) that's y am posting this
(worked for my device hope works for others too)
I don't what this error actually means or how it get fixed from what i did
I SIMPLY FLASHED A STOCK ROM FROM LAPTOP
(am not adding any links bcz this is my first post so am not allowed , but u will easily get the steps details on web)
as TRWP isn't working at all
use a PC/LAPTOP with a working USB cable
1. Download drivers of device n installed in PC (there r various methods available find a suitable one for ur device)
2. for mediatek device use SP FLASH TOOL for flashing ROM/CUSTOM ROM i used STOCK ROM (or find a suitable way to flash from PC/LAPTOP depending on ur device)
3. follow the procedure of flashing ROM as described
4. After successful flashing disconnect phone from PC/LAPTOP and reboot phn (it will take some tym on first boot so wait for some minutes)
5. All done
n check ur IMEI (*#06#) if u get INVALID
as i get then just use MAUI META OR SN WRITE TOOL (or any other method suitable to ur device some apps r also mentioned which works on rooted device to fix this) i used maui meta
n might b u get NVRAM WARNING: ERR= 0*10( if used SP FLASH TOOL) simply search on web n u will resolve it
phone is working fine am also using internet
worked for me( didn't tried on any other device)
hope works for others also, who r getting this error
Al the best
Hello dear all,
after a long time of rush around different solutions I finally figure it out how to hard brick Indian le max x900
(note hard brick means ur phone is completely dead no charging,no restart, no fastboot etc....becoz of may be wrong rom flashing)
1. Install qualcom driver and latest qpst 2.7 (link: https://androiddatahost.com/np4wq)(qualcomm driver present in qfil file for x800 link in step4)
2. Installed qpst will be present at c:/program files(x86)/qualcomm/qpst/bin....inside it find qfil flashing application...open it
3. connect ur dead indian le max to computer and see if qualcomm usb driver can detect it(u may notice qfil flashing appln will also show some com no connected)....if u r unsuccessful just press both volume key/or power key and both vol key at a time for around 1 min when phone is connected to pc. (in any case u failed no big issue try to install it manually by searching in google, well I have used win10 and it simply worked for me)
4. Download the qfil file for x800 and extract it somewhere, it also have qualcomm driver inside it so once extracted install that driver too (link: https://mega.nz/#!G0ozxZwb!vowHBNjQGC1AtVOx2ThrWpYt6yHEnAACFvq90XDF4n0)....actually i tried qfil for x900,x1, line brush tutorials etc but none of those worked for me and x800 aks le 1 pro have the same processor so it can make x900 alive....sahara error all the time... ( a big thx to UNBRICK X800 X900 Started by mxmax in leeco.re)
5. if all done correctly u can see ur dead indian lemax phone connected to qualcomm mode with some com no, that u can notice in qfil flashing appln.
6.in the flashing appln select Flat Build,
in browse select ur extracted qfil x800 folder (path\qfil x800\x1_na_dvt1_fastboot\prog_emmc_firehose_8994_lite.mbn,
in load xml select rawprogram_unsparse (present inside folder x1_na_dvt1_fastboot)....after that patch0 that automatically comes,
than finally click on download....u can see process started and once completed exit it.
7. So now ur phone have qfil of x800 flashed, try to boot it by pressing power button for 1 min.....u can see blue led blinked and ur phone start to boot (if not means ur phone's battery is very less simply connect it with charger by pressing power button u can see phone starts to show orange led flashing after some time....ie it start charging)
8. once it start in step 7 the phone show chinese letv logo...but it doesn't boot becoz it is for x800 not x900....phone simply tries to boot again and again...so once the phone start to reboot by itself simply press power button and vol down key at a time....u can see small penguin that means ur phone is in fastboot mode.
9. its time now to install twrp 3.0 to ur x900 connected to pc in fastboot mode(link: https://www.androidfilehost.com/?fid=24533103863139522)...simply install twrp from link extract it open the twrp installer appln ....and install it by pressing backspace key that u find during instrution)....great thing about twrp recovery is it can charge ur phone too while connected to power source.
10.So after step 9 ur phone should be in twrp 3.0 recovery mode....u can see internal storage of it shows in pc of around 10 gb not 52 gb.....so inside twrp\wipe\format data...type yes, and advanced wipe select all and wipe......once done u have 52 gb avail in internal storage that u can see in ur pc too.
11. put indian version any rom inside ur internal storage and flash it...once done ur phone will successfully rebooted links for roms are below...simply download any as per ur choice
https://drive.google.com/file/d/0B6m-wM0vYiL8U0U4cUhUM2NlMGc/view (this is stock 12s rom)
https://www.androidfilehost.com/?fid=24533103863139959 (this is also stable 12s rom made bu cuoco with extra settings and dolby presinstalled)
http://evolutionletvx900.blogspot.in/ (this will give u link for 12s and 13s rom which have nova and google launcher preinstalled)
flash any rom and if any any file after flashed make big vibrate ur phone with blue led on...don't panic...simply press power button for long time it will reboot ur phone
I request to make support for Indian x900 also since we cant able to install eui 5.8 based roms....tried to install several roms by deleting lines for check in update-script...even though it installed make it brick/dead again...so plz help for android 6
It Stuck in Leeco logo powered by android
Hello Rahul Raj
Thanks for the instructions to hard brick LeMax X900
I have done as per the instructions provided by you. But it boots and it get stuck in the leeco powered by android in display it never goes further. Please let me know what is the issue.
Rahulraj2012 said:
Hello dear all,
after a long time of rush around different solutions I finally figure it out how to hard brick Indian le max x900
(note hard brick means ur phone is completely dead no charging,no restart, no fastboot etc....becoz of may be wrong rom flashing)
1. Install qualcom driver and latest qpst 2.7 (link: https://androiddatahost.com/np4wq)(qualcomm driver present in qfil file for x800 link in step4)
2. Installed qpst will be present at c:/program files(x86)/qualcomm/qpst/bin....inside it find qfil flashing application...open it
3. connect ur dead indian le max to computer and see if qualcomm usb driver can detect it(u may notice qfil flashing appln will also show some com no connected)....if u r unsuccessful just press both volume key/or power key and both vol key at a time for around 1 min when phone is connected to pc. (in any case u failed no big issue try to install it manually by searching in google, well I have used win10 and it simply worked for me)
4. Download the qfil file for x800 and extract it somewhere, it also have qualcomm driver inside it so once extracted install that driver too (link: https://mega.nz/#!G0ozxZwb!vowHBNjQGC1AtVOx2ThrWpYt6yHEnAACFvq90XDF4n0)....actually i tried qfil for x900,x1, line brush tutorials etc but none of those worked for me and x800 aks le 1 pro have the same processor so it can make x900 alive....sahara error all the time... ( a big thx to UNBRICK X800 X900 Started by mxmax in leeco.re)
5. if all done correctly u can see ur dead indian lemax phone connected to qualcomm mode with some com no, that u can notice in qfil flashing appln.
6.in the flashing appln select Flat Build,
in browse select ur extracted qfil x800 folder (path\qfil x800\x1_na_dvt1_fastboot\prog_emmc_firehose_8994_lite.mbn,
in load xml select rawprogram_unsparse (present inside folder x1_na_dvt1_fastboot)....after that patch0 that automatically comes,
than finally click on download....u can see process started and once completed exit it.
7. So now ur phone have qfil of x800 flashed, try to boot it by pressing power button for 1 min.....u can see blue led blinked and ur phone start to boot (if not means ur phone's battery is very less simply connect it with charger by pressing power button u can see phone starts to show orange led flashing after some time....ie it start charging)
8. once it start in step 7 the phone show chinese letv logo...but it doesn't boot becoz it is for x800 not x900....phone simply tries to boot again and again...so once the phone start to reboot by itself simply press power button and vol down key at a time....u can see small penguin that means ur phone is in fastboot mode.
9. its time now to install twrp 3.0 to ur x900 connected to pc in fastboot mode(link: https://www.androidfilehost.com/?fid=24533103863139522)...simply install twrp from link extract it open the twrp installer appln ....and install it by pressing backspace key that u find during instrution)....great thing about twrp recovery is it can charge ur phone too while connected to power source.
10.So after step 9 ur phone should be in twrp 3.0 recovery mode....u can see internal storage of it shows in pc of around 10 gb not 52 gb.....so inside twrp\wipe\format data...type yes, and advanced wipe select all and wipe......once done u have 52 gb avail in internal storage that u can see in ur pc too.
11. put indian version any rom inside ur internal storage and flash it...once done ur phone will successfully rebooted links for roms are below...simply download any as per ur choice
https://drive.google.com/file/d/0B6m-wM0vYiL8U0U4cUhUM2NlMGc/view (this is stock 12s rom)
https://www.androidfilehost.com/?fid=24533103863139959 (this is also stable 12s rom made bu cuoco with extra settings and dolby presinstalled)
http://evolutionletvx900.blogspot.in/ (this will give u link for 12s and 13s rom which have nova and google launcher preinstalled)
flash any rom and if any any file after flashed make big vibrate ur phone with blue led on...don't panic...simply press power button for long time it will reboot ur phone
I request to make support for Indian x900 also since we cant able to install eui 5.8 based roms....tried to install several roms by deleting lines for check in update-script...even though it installed make it brick/dead again...so plz help for android 6
Click to expand...
Click to collapse
Hi,
Please share me ur qfile and installation method.
i getting sahara error...
my max 1 bricked...
Help
Please i have done it perfectly but my phone is 128GB after unbrick it available storage is 8gb but I don't have any files in the phone to delete so please help me to space my phone if any idea to free it please help
Rahulraj2012 said:
Hello dear all,
after a long time of rush around different solutions I finally figure it out how to hard brick Indian le max x900
(note hard brick means ur phone is completely dead no charging,no restart, no fastboot etc....becoz of may be wrong rom flashing)
1. Install qualcom driver and latest qpst 2.7 (link: https://androiddatahost.com/np4wq)(qualcomm driver present in qfil file for x800 link in step4)
2. Installed qpst will be present at c:/program files(x86)/qualcomm/qpst/bin....inside it find qfil flashing application...open it
3. connect ur dead indian le max to computer and see if qualcomm usb driver can detect it(u may notice qfil flashing appln will also show some com no connected)....if u r unsuccessful just press both volume key/or power key and both vol key at a time for around 1 min when phone is connected to pc. (in any case u failed no big issue try to install it manually by searching in google, well I have used win10 and it simply worked for me)
4. Download the qfil file for x800 and extract it somewhere, it also have qualcomm driver inside it so once extracted install that driver too (link: https://mega.nz/#!G0ozxZwb!vowHBNjQGC1AtVOx2ThrWpYt6yHEnAACFvq90XDF4n0)....actually i tried qfil for x900,x1, line brush tutorials etc but none of those worked for me and x800 aks le 1 pro have the same processor so it can make x900 alive....sahara error all the time... ( a big thx to UNBRICK X800 X900 Started by mxmax in leeco.re)
5. if all done correctly u can see ur dead indian lemax phone connected to qualcomm mode with some com no, that u can notice in qfil flashing appln.
6.in the flashing appln select Flat Build,
in browse select ur extracted qfil x800 folder (path\qfil x800\x1_na_dvt1_fastboot\prog_emmc_firehose_8994_lite.mbn,
in load xml select rawprogram_unsparse (present inside folder x1_na_dvt1_fastboot)....after that patch0 that automatically comes,
than finally click on download....u can see process started and once completed exit it.
7. So now ur phone have qfil of x800 flashed, try to boot it by pressing power button for 1 min.....u can see blue led blinked and ur phone start to boot (if not means ur phone's battery is very less simply connect it with charger by pressing power button u can see phone starts to show orange led flashing after some time....ie it start charging)
8. once it start in step 7 the phone show chinese letv logo...but it doesn't boot becoz it is for x800 not x900....phone simply tries to boot again and again...so once the phone start to reboot by itself simply press power button and vol down key at a time....u can see small penguin that means ur phone is in fastboot mode.
9. its time now to install twrp 3.0 to ur x900 connected to pc in fastboot mode(link: https://www.androidfilehost.com/?fid=24533103863139522)...simply install twrp from link extract it open the twrp installer appln ....and install it by pressing backspace key that u find during instrution)....great thing about twrp recovery is it can charge ur phone too while connected to power source.
10.So after step 9 ur phone should be in twrp 3.0 recovery mode....u can see internal storage of it shows in pc of around 10 gb not 52 gb.....so inside twrp\wipe\format data...type yes, and advanced wipe select all and wipe......once done u have 52 gb avail in internal storage that u can see in ur pc too.
11. put indian version any rom inside ur internal storage and flash it...once done ur phone will successfully rebooted links for roms are below...simply download any as per ur choice
https://drive.google.com/file/d/0B6m-wM0vYiL8U0U4cUhUM2NlMGc/view (this is stock 12s rom)
https://www.androidfilehost.com/?fid=24533103863139959 (this is also stable 12s rom made bu cuoco with extra settings and dolby presinstalled)
http://evolutionletvx900.blogspot.in/ (this will give u link for 12s and 13s rom which have nova and google launcher preinstalled)
flash any rom and if any any file after flashed make big vibrate ur phone with blue led on...don't panic...simply press power button for long time it will reboot ur phone
I request to make support for Indian x900 also since we cant able to install eui 5.8 based roms....tried to install several roms by deleting lines for check in update-script...even though it installed make it brick/dead again...so plz help for android 6
Click to expand...
Click to collapse
the rom is X900 android 6 google play store , it will help you .
https://www.needrom.com/download/le...languages-rom-unbrick-firmware-qfil-fastboot/
tony770101 said:
the rom is X900 android 6 google play store , it will help you .
https://www.needrom.com/download/le...languages-rom-unbrick-firmware-qfil-fastboot/
Click to expand...
Click to collapse
he is protected it with password do you have pass word please
Prefect solution for bricks or le max x900
Bhai aapka jitna shukriya kya jaaye kam h kya jabardust link diya h Na Qualcomm ki jarurat Na qpst ki ek hi link me sab kuch
I have flash three time wrong rom
But your link is really great full
Thanks
Thanks a lot big B ?
Pls provide me max x900 stock rom there link is show corrupt file thanx
not working error sahara
stefdfghhfdf said:
not working error sahara
Click to expand...
Click to collapse
This Sahara Protocol error is really a nasty one. The only way I was able to avoid it was to perform fresh Windows 7 installation on another notebook and install the flashing apps there. I've tried on 5 different Windows 10 systems and it never worked on them. But now I'm fighting with finding the proper ROM for the 128GB X900 version. All the ROMs I've installed so far are bricking again the phone.
I have tried 4 different computers with different os, windows 7 32bit, 64bit and windows 10 64bit, 2 notebook fresh install windows 7 32bit and windows 10 64bit still get sahara error, it seems it won't run as firehose mode, it needs somethimg to switch to make firehose mode on my x900+
Needs help would be appreciated
leeco max x900
I have a leeco max x900 and it died, maybe you need help unbrick, thank you very much