Database Info

This is How i unbricked my Unite 2(4GB)

While trying some mods for Unite 2 , my phone got bricked, i must have done something wrong because those mods are working for others. so it was completely my mistake. so i spent my last 4 hours trying to find a solution and this is how i finally got it work.
JUST WANT TO REMIND YOU THAT TRY THIS GUIDE ON YOUR ON RISK, IM NOT GIVING YOU ANY GUARANTEE THAT IT WILL GOING UNBRICK YOUR DEVICE, IM JUST SHARING THE METHOD WHICH WORKED FOR ME
MY DEVICE
MICROMAX UNITE 2 4GB
KITKAT 4.4.2
following was the symptoms of my device only try this guide if yours are identical to mine
Phone was not booting up (nothing was happening no matter how long i press power button)
wasn't booting into to recovery mode also notification led was not turning on when plugged to PC (i.e No charging)
windows was making device plugged and unplugged sound over and over again when i was connecting it to pc using data cable
now from the 3rd point i figured out that my phone was being detected by my pc but only for a brief moment
so after searching for a while i found out that it was a problem with the PRELOADER and device was trying load META mode(donAt have any clue what that is) so i needed to Install MTK65XX Preloader USB Vcom Drivers for SP Flash Tools.
this is how i did it
Step 1 :Firstly Download MTK USB VCOM Drivers from here
DOWNLOAD
the extract it
Step 2 : Now open Device Manager in your PC by right clicking on My Computer and then click on Manage.
Step 3 :Next go to Device Manager in that and click on your PC name and then click on Add legacy hardware, see below
Step 4 : Now in Add Hardware Wizard click on Next >> Install the Hardware that i manually select from a list (Advanced) >> Show All Devices >> Next >>Have a Disk >> Browse, Now select the inf file according to your OS and from where you extracted the downloaded drivers.
Step 5 : Now click on Next on the wizard to install the drivers and when promoted for security issue just click on install any anyway to finish the driver installation.
Step 6 : After installation finish restart your PC.
Source
now remove battery of your phone and then plug it to your pc using data cable While Holding Volume up button
the windows will recognize it and install drivers, now open device manager and if you find a device under Ports(Com&LPT) which has Mediatek, MTK, USB, VCOM,PRELOADER keywords in it then you are good to go
now download SP Flash Tool
Devhost l Mediafire
and Factory rom
Download
and then extract the Factory rom archive
Then flash Stock ROM by following these steps:
Step 1: Open SP flash tool and load the Scatter file of Stock ROM it is inside the extracted factory rom folder
Step 2: Select Format all+Download in drop-down menu.
Step 3:Remove the battery of your phone.
Step 4:Click Download in SP Flash Tool.
Step 5:connect your phone to pc via USB cable while holding volume up button you can release volume button when the process is stared . Wait for flashing to complete .
Step 6: when the process is completed unplug the phone, insert the battery and then turn it one hopefully it should boot now and you should see Micromax logo just remember first boot take long time so just wait for it to completely boot
if this doesn't work then don't loose hope keep on searching for other ways ,

Nice one.... Will be helpful for some

Totally bricked a ZTE Blade L3, any solutions?

Hello,
tried to flash a custom OS and root on a ZTE Blade L3. I got CWM Recovery working and flashed a CM12.1 rom on it, after that, it failed to mount all partitions /cache etc. etc. then I restarted the phone and it bootloops + fades white immediatly!
Recovery or Bootloader etc. dont work
If I connenct the phone on my computer it connect, disconnnect, connect, disconnect and so on.
Anyone a solution or idea how I could save that?

I can help you, So first we have to know is it Hard bricked or just Soft bricked, In any case it's not hard to unbrick. Just follow these steps :silly:
1. Download SPFlashTool to your PC https://androidmtk.com/smart-phone-flash-tool
2.Download Drivers for MTK6582 (I hope I wrote the right MTK name) http://www.devfiles.co/download/0InO9P5m/MT65xx_USB_VCOM_DRIVERS.zip
3.Download stock firmware
http://r.srvtrck.com/v1/redirect?ur...ar&ad_t=advertiser&ad_zi=YieldLink&ad_dt=link
IF SOFT BRICKED:
-Update drivers with the one up there in the thread, Open SPFlashTool, Find scatter file (just a file with a .txt extension) and place it in Scatter file area in SPFlashTool (search on YouTube how to use SP), After you did that manually add the files that are missing ( it's usually the recovery and some other files that are missing), Then press download and AFTER that connected your phone with a USB cable! Then wait it to flash :victory: ,
IF HARD BRICKED:
-Remove battery,
-Connect to PC with USB cable
-It probably won't recognise your phone, so we need to enter so called META mode so we could flash the PRELOADER, to make the phone recognisable.
-To enter META mode remove battery( if you didn't), connect as I said up there, and try pressing and holding some buttons, I can't remember the correct combination that enters META mode but I think it was all buttons for 5 seconds, anyway you will know when you entered META mode if your PC recognises a change or if he finds the device :good:
-then enter SPFlashTool and flash the PRELOADER only (hope you know to use SPFlashTool)
-After that disconnect your phone and add battery
-Enter SPFlashTool and Flash whole system (all files except CACHE AND USER)
-You should be done ?
Hope it helps

Here's a total solution
https://androidfilehost.com/?fid=746010030569947486
Flash tool and stock ROM included. Just follow this:
1. unpack
2. run flashtool.exe
3. load scatter
4. click download
5. unplug your battery and plug the phone to your PC via USB
6. wait for process to finish and unplug your phone
7. Boot
P.S. I guess you'll need some drivers. Check the post above.
Good luck!

Fix Coolpad Dazen 1 stuck at 11% or so while flashing with YGDP tool

Those who are able to get into fastboot mode but are stuck at 11% or so, can try the following trick.
1) Download the attached YGDP tool and unzip the same, the file contains YGDP tool V5.0 and Flash_all_Dazen.bat.
2) Load the Coolpad Dazen 1 firmware with the given YGDP tool.
3) Once loaded, go to the YGDP tool directory. There you should see DownFiles>8297L_I00 folder.
4) Copy 8297L_I00 folder to C drive.
5) Place the given Flash_all_Dazen.bat in 8297L_I00 folder.
6) Put you device into fastboot mode with the emmc image sdcard.
7) Double click on the Flash_all_Dazen.bat.
If the above trick worked then your device should boot and it failed then let me know the error.
Download -- https://drive.google.com/file/d/0Bwy...ew?usp=sharing
UPDATE: One of the user was successfully able to recover his device by following the above instructions. Once the flashing is successful and while booting if you get stuck at "Modem 1/1 up & down" screen then just press and hold volume up + down + power button. This shall take you to a page with 4 options written in Chinese, select the top/first option and the device shall reboot without error.

help plz
link expired. please update

device starts to vibrates continously, fastboot mode is gone.
after following all the instructions the device starts to vibrates continously ,the fastboot option is lost, no led, only vibration and in device manager quolcomm 9008 is showing, . searched almost the internet, tried with Qfill tool and it fails. please help , a lot of users are suffering from this issue, thanks in advance.

Fix Coolpad Dazen 1 stuck at 11% or so while flashing with YGDP tool

Hello Guys
Many users are not able to flash their Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% or so. These are the users who had hard bricked their devices and the followed the trick of booting bootloader with an sdcard ---- https://forum.xda-developers.com/general/general/guide-unbrick-coolpad-dazen1-qualcomm-t3362253
If you are one of the user who is able to get into fastboot mode and is facing the above mentioned issue then you've come to the right post.
Following is the fix....
1) Download the attached YGDP tool and unzip the same, the file contains YGDP tool V5.0 and Flash_all_Dazen.bat.
2) Load the Coolpad Dazen 1 firmware with the given YGDP tool.
3) Once loaded, go to the YGDP tool directory. There you should see DownFiles>8297L_I00 folder.
4) Copy 8297L_I00 folder to C drive.
5) Place the given Flash_all_Dazen.bat in 8297L_I00 folder.
6) Put you device into fastboot mode with the emmc image sdcard.
7) Double click on the Flash_all_Dazen.bat.
Once the flashing is successful and while booting if you get stuck at "Modem 1/1 up & down" screen then just press and hold volume up + down + power button. This shall take you to a page with 4 options written in Chinese, select the top/first option and the device shall reboot without error.
One of the user had successfully been able to fix his Coolpad Dazen 1 device by following the above mentioned instruction. If you still have any issue let me know I'll try to help.
Download ---- https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing
If you find this post useful then hit the thanks button :good::good::good:
Cheers

How to make emmc image sdcard..can u plz ilaborate...

jaschhabra said:
How to make emmc image sdcard..can u plz ilaborate...
Click to expand...
Click to collapse
Refer to the first link given in the post.

After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..

jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
No idea how to resolve the issue you're facing. Shall let you know if I find any solution.

jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
Me also stucked at the same problem any solution???

R4th0r3 said:
Me also stucked at the same problem any solution???
Click to expand...
Click to collapse
solved??

same problem
jaschhabra said:
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..
Click to expand...
Click to collapse
After all the process..my phone is starting vibrating continuosly ..woth any info on screen...no booting comes..what to do now..

There are not avilable DownFiles>8297L_I00 folder in YGDP tool V5.0 folder
---------- Post added at 07:47 AM ---------- Previous post was at 07:13 AM ----------
Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% . I have downloaded many times given your this link ---- https://drive.google.com/file/d/0Bwy...ew?usp=sharing, but there are not folder seen this (DownFiles>8297L_I00) folder in Tool folder. please help me.

Coolpad dazen 1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help me.

Now my completely useless. Whenever I am trying to turn on the phone, it just vibrates continuously (with emmc flashed sd card) . there is no logo. no sound. there is nothing on display. without sd card, I am unable to boot. Any solution?
]

[email protected] said:
There are not avilable DownFiles>8297L_I00 folder in YGDP tool V5.0 folder
---------- Post added at 07:47 AM ---------- Previous post was at 07:13 AM ----------
Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% . I have downloaded many times given your this link ---- https://drive.google.com/file/d/0Bwy...ew?usp=sharing, but there are not folder seen this (DownFiles>8297L_I00) folder in Tool folder. please help me.
Click to expand...
Click to collapse
Link updated - - - https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing

Imssk said:
Now my completely useless. Whenever I am trying to turn on the phone, it just vibrates continuously (with emmc flashed sd card) . there is no logo. no sound. there is nothing on display. without sd card, I am unable to boot. Any solution?
]
Click to expand...
Click to collapse
No solution yet. Shall update if there's any.

[email protected] said:
Coolpad dazen 1
please help me.
Click to expand...
Click to collapse
Do hard reset and check.

After all the process..my phone is starting vibrating continuosly with emmc image sd card. without emmc sd card not any activites fully dead..woth any info on screen...no booting comes. no connecting fastboot mode (no any information on screen, fully blank & not charging show display. after connecting device to pc, device not detecting in pc, how to connecting device to pc? what to do now. please help me.

Zauq said:
No solution yet. Shall update if there's any.
Click to expand...
Click to collapse
Thanks for your quick response. I hope and request that you will soon find a working solution. because I have only one phone and that too is dead now. I hope you understand....

I successfully revived my dead phone by following this guide.Thanks a lot. Actually i was searching for such scattered QPST files....This version of YGDP extracts it all...:good:. Earlier Assembly or customer version didn't exract CPB files for Qualcomm devices......:laugh: .....Also place the fastboot files before running the batch file.
---------- Post added at 09:37 AM ---------- Previous post was at 09:12 AM ----------
Earlier my phone was also not getting into bootloader screen even after inserting memory card with flashed emmc in it and was vibrating continuously.....Then I did following thing(in WINDOWS 7) to force the phone into old qualcom 9008 mode(complete hard bricked condition):
1. Installed Mini Tool Partion Wizard on my PC
2. UNINSTALLED Qualcomm Drivers.
3.connected phone with memory card (with flashed emmc in it)
4. Now the computer will recognize it as USB bulk in device manager and many partion will start to pop out on screen.
5. Opened "mini tool partion wizard". There u will see all partion of phone....
6. Deleted all partion and clicked on apply button
After mini tool will complete its operation then phone's bootloader screen will automatically light up.
Now after I followed the process given in this thread (to flash all the scattered file using batch file. fastboot files should be in that folder too)
If anybody tried and suceeded, then give a reply too

Zauq said:
Hello Guys
Many users are not able to flash their Coolpad Dazen 1 devices with YDGP tool and got stuck at 11% or so. These are the users who had hard bricked their devices and the followed the trick of booting bootloader with an sdcard ---- https://forum.xda-developers.com/general/general/guide-unbrick-coolpad-dazen1-qualcomm-t3362253
If you are one of the user who is able to get into fastboot mode and is facing the above mentioned issue then you've come to the right post.
Following is the fix....
1) Download the attached YGDP tool and unzip the same, the file contains YGDP tool V5.0 and Flash_all_Dazen.bat.
2) Load the Coolpad Dazen 1 firmware with the given YGDP tool.
3) Once loaded, go to the YGDP tool directory. There you should see DownFiles>8297L_I00 folder.
4) Copy 8297L_I00 folder to C drive.
5) Place the given Flash_all_Dazen.bat in 8297L_I00 folder.
6) Put you device into fastboot mode with the emmc image sdcard.
7) Double click on the Flash_all_Dazen.bat.
Once the flashing is successful and while booting if you get stuck at "Modem 1/1 up & down" screen then just press and hold volume up + down + power button. This shall take you to a page with 4 options written in Chinese, select the top/first option and the device shall reboot without error.
One of the user had successfully been able to fix his Coolpad Dazen 1 device by following the above mentioned instruction. If you still have any issue let me know I'll try to help.
Download ---- https://drive.google.com/file/d/0Bwy9M10qfmJLUFNoMk5IY0lpYjQ/view?usp=sharing
If you find this post useful then hit the thanks button :good::good::good:
Cheers
Click to expand...
Click to collapse
After following these steps , iam getting the same thing which everyone is getting i.e, phone is just vibrating...
I tried connecting my phone to pc these are my results
1. When the phone is connected many disks are show in my computer , and many pop ups comes says to format
"REFER IMAGE 1" in the attachment.
2. When the phone us connected a disk is shown up , on opening this disk , a folder is found named 'image' , after opening the image folder , many files are shown
"REFER IMAGE 2, IMAGE 3" in the attachment
These two are not fixed i.e, sometimes result 1 comes and sometimes result 2 comes, every time i connect my phone any one of these comes up.

Khanalltech said:
After following these steps , iam getting the same thing which everyone is getting i.e, phone is just vibrating...
I tried connecting my phone to pc these are my results
1. When the phone is connected many disks are show in my computer , and many pop ups comes says to format
"REFER IMAGE 1" in the attachment.
2. When the phone us connected a disk is shown up , on opening this disk , a folder is found named 'image' , after opening the image folder , many files are shown
"REFER IMAGE 2, IMAGE 3" in the attachment
These two are not fixed i.e, sometimes result 1 comes and sometimes result 2 comes, every time i connect my phone any one of these comes up.
Click to expand...
Click to collapse
Following is the written by a Coolpad Daze 1 user who was able to revive his device. He was facing the same issue you're facing. First follow his method and later mine and see if it helps.
https://forum.xda-developers.com/ge...-dazen1-qualcomm-t3362253/page15#post72483446
(Quote:
Originally Posted by Avinash2
I successfully revived my dead phone by following this guide .Thanks a lot. Actually i was searching for such scattered QPST files....This version of YGDP extracts it all.... Earlier Assembly or customer version didn't exract CPB files for Qualcomm devices...... .....Also place the fastboot files before running the batch file.....
Earlier my phone was also not getting into bootloader screen even after inserting memory card with flashed emmc in it and was vibrating continuously.....Then I did following thing(in WINDOWS 7) to force the phone into old qualcom 9008 mode(complete hard bricked condition):
1. Installed Mini Tool Partion Wizard on my PC
2. UNINSTALLED Qualcomm Drivers.
3.connected phone with memory card (with flashed emmc in it)
4. Now the computer will recognize it as USB bulk in device manager and many partion will start to pop out on screen.
5. Opened "mini tool partion wizard". There u will see all partion of phone....
6. Deleted all partion and clicked on apply button
After mini tool will complete its operation then phone's bootloader screen will automatically light up.
Now after I followed the process given in this link (to flash all the scattered file using batch file. fastboot files should be in that folder too and phone' driver should be installed)
If anybody tried and suceeded, then give a reply too)

I can suggest another idea i.e shorting pin method...
If phone is dead and want to flash , it can be done by QFIL .
By connecting phone in qualcomm HS Qdloader 9008, it can be achieved by shorting pin method...
But the thing is that i don't know which pin are to be shorted...
I tried finding in youtube, but didn't get for dazen 1.
Can anyone find those pin which are to be shorted

Indian letv leeco max x900 hard brick resolved (now how to install eui 5.8/android6?)

Hello dear all,
after a long time of rush around different solutions I finally figure it out how to hard brick Indian le max x900
(note hard brick means ur phone is completely dead no charging,no restart, no fastboot etc....becoz of may be wrong rom flashing)
1. Install qualcom driver and latest qpst 2.7 (link: https://androiddatahost.com/np4wq)(qualcomm driver present in qfil file for x800 link in step4)
2. Installed qpst will be present at c:/program files(x86)/qualcomm/qpst/bin....inside it find qfil flashing application...open it
3. connect ur dead indian le max to computer and see if qualcomm usb driver can detect it(u may notice qfil flashing appln will also show some com no connected)....if u r unsuccessful just press both volume key/or power key and both vol key at a time for around 1 min when phone is connected to pc. (in any case u failed no big issue try to install it manually by searching in google, well I have used win10 and it simply worked for me)
4. Download the qfil file for x800 and extract it somewhere, it also have qualcomm driver inside it so once extracted install that driver too (link: https://mega.nz/#!G0ozxZwb!vowHBNjQGC1AtVOx2ThrWpYt6yHEnAACFvq90XDF4n0)....actually i tried qfil for x900,x1, line brush tutorials etc but none of those worked for me and x800 aks le 1 pro have the same processor so it can make x900 alive....sahara error all the time... ( a big thx to UNBRICK X800 X900 Started by mxmax in leeco.re)
5. if all done correctly u can see ur dead indian lemax phone connected to qualcomm mode with some com no, that u can notice in qfil flashing appln.
6.in the flashing appln select Flat Build,
in browse select ur extracted qfil x800 folder (path\qfil x800\x1_na_dvt1_fastboot\prog_emmc_firehose_8994_lite.mbn,
in load xml select rawprogram_unsparse (present inside folder x1_na_dvt1_fastboot)....after that patch0 that automatically comes,
than finally click on download....u can see process started and once completed exit it.
7. So now ur phone have qfil of x800 flashed, try to boot it by pressing power button for 1 min.....u can see blue led blinked and ur phone start to boot (if not means ur phone's battery is very less simply connect it with charger by pressing power button u can see phone starts to show orange led flashing after some time....ie it start charging)
8. once it start in step 7 the phone show chinese letv logo...but it doesn't boot becoz it is for x800 not x900....phone simply tries to boot again and again...so once the phone start to reboot by itself simply press power button and vol down key at a time....u can see small penguin that means ur phone is in fastboot mode.
9. its time now to install twrp 3.0 to ur x900 connected to pc in fastboot mode(link: https://www.androidfilehost.com/?fid=24533103863139522)...simply install twrp from link extract it open the twrp installer appln ....and install it by pressing backspace key that u find during instrution)....great thing about twrp recovery is it can charge ur phone too while connected to power source.
10.So after step 9 ur phone should be in twrp 3.0 recovery mode....u can see internal storage of it shows in pc of around 10 gb not 52 gb.....so inside twrp\wipe\format data...type yes, and advanced wipe select all and wipe......once done u have 52 gb avail in internal storage that u can see in ur pc too.
11. put indian version any rom inside ur internal storage and flash it...once done ur phone will successfully rebooted links for roms are below...simply download any as per ur choice
https://drive.google.com/file/d/0B6m-wM0vYiL8U0U4cUhUM2NlMGc/view (this is stock 12s rom)
https://www.androidfilehost.com/?fid=24533103863139959 (this is also stable 12s rom made bu cuoco with extra settings and dolby presinstalled)
http://evolutionletvx900.blogspot.in/ (this will give u link for 12s and 13s rom which have nova and google launcher preinstalled)
flash any rom and if any any file after flashed make big vibrate ur phone with blue led on...don't panic...simply press power button for long time it will reboot ur phone
I request to make support for Indian x900 also since we cant able to install eui 5.8 based roms....tried to install several roms by deleting lines for check in update-script...even though it installed make it brick/dead again...so plz help for android 6

It Stuck in Leeco logo powered by android
Hello Rahul Raj
Thanks for the instructions to hard brick LeMax X900
I have done as per the instructions provided by you. But it boots and it get stuck in the leeco powered by android in display it never goes further. Please let me know what is the issue.

Rahulraj2012 said:
Hello dear all,
after a long time of rush around different solutions I finally figure it out how to hard brick Indian le max x900
(note hard brick means ur phone is completely dead no charging,no restart, no fastboot etc....becoz of may be wrong rom flashing)
1. Install qualcom driver and latest qpst 2.7 (link: https://androiddatahost.com/np4wq)(qualcomm driver present in qfil file for x800 link in step4)
2. Installed qpst will be present at c:/program files(x86)/qualcomm/qpst/bin....inside it find qfil flashing application...open it
3. connect ur dead indian le max to computer and see if qualcomm usb driver can detect it(u may notice qfil flashing appln will also show some com no connected)....if u r unsuccessful just press both volume key/or power key and both vol key at a time for around 1 min when phone is connected to pc. (in any case u failed no big issue try to install it manually by searching in google, well I have used win10 and it simply worked for me)
4. Download the qfil file for x800 and extract it somewhere, it also have qualcomm driver inside it so once extracted install that driver too (link: https://mega.nz/#!G0ozxZwb!vowHBNjQGC1AtVOx2ThrWpYt6yHEnAACFvq90XDF4n0)....actually i tried qfil for x900,x1, line brush tutorials etc but none of those worked for me and x800 aks le 1 pro have the same processor so it can make x900 alive....sahara error all the time... ( a big thx to UNBRICK X800 X900 Started by mxmax in leeco.re)
5. if all done correctly u can see ur dead indian lemax phone connected to qualcomm mode with some com no, that u can notice in qfil flashing appln.
6.in the flashing appln select Flat Build,
in browse select ur extracted qfil x800 folder (path\qfil x800\x1_na_dvt1_fastboot\prog_emmc_firehose_8994_lite.mbn,
in load xml select rawprogram_unsparse (present inside folder x1_na_dvt1_fastboot)....after that patch0 that automatically comes,
than finally click on download....u can see process started and once completed exit it.
7. So now ur phone have qfil of x800 flashed, try to boot it by pressing power button for 1 min.....u can see blue led blinked and ur phone start to boot (if not means ur phone's battery is very less simply connect it with charger by pressing power button u can see phone starts to show orange led flashing after some time....ie it start charging)
8. once it start in step 7 the phone show chinese letv logo...but it doesn't boot becoz it is for x800 not x900....phone simply tries to boot again and again...so once the phone start to reboot by itself simply press power button and vol down key at a time....u can see small penguin that means ur phone is in fastboot mode.
9. its time now to install twrp 3.0 to ur x900 connected to pc in fastboot mode(link: https://www.androidfilehost.com/?fid=24533103863139522)...simply install twrp from link extract it open the twrp installer appln ....and install it by pressing backspace key that u find during instrution)....great thing about twrp recovery is it can charge ur phone too while connected to power source.
10.So after step 9 ur phone should be in twrp 3.0 recovery mode....u can see internal storage of it shows in pc of around 10 gb not 52 gb.....so inside twrp\wipe\format data...type yes, and advanced wipe select all and wipe......once done u have 52 gb avail in internal storage that u can see in ur pc too.
11. put indian version any rom inside ur internal storage and flash it...once done ur phone will successfully rebooted links for roms are below...simply download any as per ur choice
https://drive.google.com/file/d/0B6m-wM0vYiL8U0U4cUhUM2NlMGc/view (this is stock 12s rom)
https://www.androidfilehost.com/?fid=24533103863139959 (this is also stable 12s rom made bu cuoco with extra settings and dolby presinstalled)
http://evolutionletvx900.blogspot.in/ (this will give u link for 12s and 13s rom which have nova and google launcher preinstalled)
flash any rom and if any any file after flashed make big vibrate ur phone with blue led on...don't panic...simply press power button for long time it will reboot ur phone
I request to make support for Indian x900 also since we cant able to install eui 5.8 based roms....tried to install several roms by deleting lines for check in update-script...even though it installed make it brick/dead again...so plz help for android 6
Click to expand...
Click to collapse
Hi,
Please share me ur qfile and installation method.
i getting sahara error...
my max 1 bricked...

Help
Please i have done it perfectly but my phone is 128GB after unbrick it available storage is 8gb but I don't have any files in the phone to delete so please help me to space my phone if any idea to free it please help

Rahulraj2012 said:
Hello dear all,
after a long time of rush around different solutions I finally figure it out how to hard brick Indian le max x900
(note hard brick means ur phone is completely dead no charging,no restart, no fastboot etc....becoz of may be wrong rom flashing)
1. Install qualcom driver and latest qpst 2.7 (link: https://androiddatahost.com/np4wq)(qualcomm driver present in qfil file for x800 link in step4)
2. Installed qpst will be present at c:/program files(x86)/qualcomm/qpst/bin....inside it find qfil flashing application...open it
3. connect ur dead indian le max to computer and see if qualcomm usb driver can detect it(u may notice qfil flashing appln will also show some com no connected)....if u r unsuccessful just press both volume key/or power key and both vol key at a time for around 1 min when phone is connected to pc. (in any case u failed no big issue try to install it manually by searching in google, well I have used win10 and it simply worked for me)
4. Download the qfil file for x800 and extract it somewhere, it also have qualcomm driver inside it so once extracted install that driver too (link: https://mega.nz/#!G0ozxZwb!vowHBNjQGC1AtVOx2ThrWpYt6yHEnAACFvq90XDF4n0)....actually i tried qfil for x900,x1, line brush tutorials etc but none of those worked for me and x800 aks le 1 pro have the same processor so it can make x900 alive....sahara error all the time... ( a big thx to UNBRICK X800 X900 Started by mxmax in leeco.re)
5. if all done correctly u can see ur dead indian lemax phone connected to qualcomm mode with some com no, that u can notice in qfil flashing appln.
6.in the flashing appln select Flat Build,
in browse select ur extracted qfil x800 folder (path\qfil x800\x1_na_dvt1_fastboot\prog_emmc_firehose_8994_lite.mbn,
in load xml select rawprogram_unsparse (present inside folder x1_na_dvt1_fastboot)....after that patch0 that automatically comes,
than finally click on download....u can see process started and once completed exit it.
7. So now ur phone have qfil of x800 flashed, try to boot it by pressing power button for 1 min.....u can see blue led blinked and ur phone start to boot (if not means ur phone's battery is very less simply connect it with charger by pressing power button u can see phone starts to show orange led flashing after some time....ie it start charging)
8. once it start in step 7 the phone show chinese letv logo...but it doesn't boot becoz it is for x800 not x900....phone simply tries to boot again and again...so once the phone start to reboot by itself simply press power button and vol down key at a time....u can see small penguin that means ur phone is in fastboot mode.
9. its time now to install twrp 3.0 to ur x900 connected to pc in fastboot mode(link: https://www.androidfilehost.com/?fid=24533103863139522)...simply install twrp from link extract it open the twrp installer appln ....and install it by pressing backspace key that u find during instrution)....great thing about twrp recovery is it can charge ur phone too while connected to power source.
10.So after step 9 ur phone should be in twrp 3.0 recovery mode....u can see internal storage of it shows in pc of around 10 gb not 52 gb.....so inside twrp\wipe\format data...type yes, and advanced wipe select all and wipe......once done u have 52 gb avail in internal storage that u can see in ur pc too.
11. put indian version any rom inside ur internal storage and flash it...once done ur phone will successfully rebooted links for roms are below...simply download any as per ur choice
https://drive.google.com/file/d/0B6m-wM0vYiL8U0U4cUhUM2NlMGc/view (this is stock 12s rom)
https://www.androidfilehost.com/?fid=24533103863139959 (this is also stable 12s rom made bu cuoco with extra settings and dolby presinstalled)
http://evolutionletvx900.blogspot.in/ (this will give u link for 12s and 13s rom which have nova and google launcher preinstalled)
flash any rom and if any any file after flashed make big vibrate ur phone with blue led on...don't panic...simply press power button for long time it will reboot ur phone
I request to make support for Indian x900 also since we cant able to install eui 5.8 based roms....tried to install several roms by deleting lines for check in update-script...even though it installed make it brick/dead again...so plz help for android 6
Click to expand...
Click to collapse
the rom is X900 android 6 google play store , it will help you .
https://www.needrom.com/download/le...languages-rom-unbrick-firmware-qfil-fastboot/

tony770101 said:
the rom is X900 android 6 google play store , it will help you .
https://www.needrom.com/download/le...languages-rom-unbrick-firmware-qfil-fastboot/
Click to expand...
Click to collapse
he is protected it with password do you have pass word please

Prefect solution for bricks or le max x900
Bhai aapka jitna shukriya kya jaaye kam h kya jabardust link diya h Na Qualcomm ki jarurat Na qpst ki ek hi link me sab kuch
I have flash three time wrong rom
But your link is really great full
Thanks
Thanks a lot big B ?

Pls provide me max x900 stock rom there link is show corrupt file thanx

not working error sahara

stefdfghhfdf said:
not working error sahara
Click to expand...
Click to collapse
This Sahara Protocol error is really a nasty one. The only way I was able to avoid it was to perform fresh Windows 7 installation on another notebook and install the flashing apps there. I've tried on 5 different Windows 10 systems and it never worked on them. But now I'm fighting with finding the proper ROM for the 128GB X900 version. All the ROMs I've installed so far are bricking again the phone.

I have tried 4 different computers with different os, windows 7 32bit, 64bit and windows 10 64bit, 2 notebook fresh install windows 7 32bit and windows 10 64bit still get sahara error, it seems it won't run as firehose mode, it needs somethimg to switch to make firehose mode on my x900+
Needs help would be appreciated

leeco max x900
I have a leeco max x900 and it died, maybe you need help unbrick, thank you very much