Related
I recently had a problem with my 1st Touch Pro with image ghosting/ burn in and ive just had it replaced. Now the same problem is happening with the new device. The problem only seams to happen with custom roms being used on the device. If i re-flash my phone back to the default/stock rom i get no screen problems at all.
Any idea why this only happens on custom roms and not the default/stock rom??
edit: ive attached an example of what i mean in image ghosting/burn in. Just in case some people wasn't sure what i meant by it.
More info?
Heya! What was the last ROM you had this problem with? Version info would be extremely helpful as I have heard that specific builds have some graphics bugs.
I've had that same issue as well on 2 different fuze's. Using various builds of EnergyROMs... However, after reflashing to stock and using it awhile, I'd get the ghosting on that too.
Anyone have any ideas?
Ehh my 2nd Fuze is doing this so I'm getting a replacement, and I'll just do the HTC ROM upgrade and keep WM6.1. I'm tired of it, and the landscape view also distorts the start menu icons 90% of the time.
Having flashed back to a stock rom, doing a hard reset... Playing with it for awhile... The ghosting is evident on it as well... I've also had where the bottom section of the screen will flicker quickly...
Anyone else?
I think it's a hardware defect. My first phone did that, and then after a few weeks, I had to get a warranty replacement because the screen eventually went completely black after doing it intermittently).
I've had both ghosting effects & occasional rapid flickering since I first bought the Fuze back in November. It's intermittent but happens most when the device is hot (either from use or simply being in a hot location). So far it always clears up after a while. This happened on the stock rom and every custom rom I've used so far.
I'm fairly certain it's a hardware issue with the Fuze/TP because the ghost will tend to remain there for a while even after a soft reset.
Hopefully my good fortune continues and it doesn't end up breaking permanently some day.
it is definitely a hardware issue.
I just received a "repaired" phone back from HTC today only to turn it on and find the same problem. I had to call again today and complain...and the only thing they could do for me was ask me to send it in again....so pissed.
I literally got 5x FUZE replacements and each had this until this last one I've gotten...!
Vid: http://www.youtube.com/watch?v=fFb4bQomqPw
Thx
JFlitt
JFlitt said:
I literally got 5x FUZE replacements and each had this until this last one I've gotten...!
Vid: http://www.youtube.com/watch?v=fFb4bQomqPw
Thx
JFlitt
Click to expand...
Click to collapse
were they replaced through HTC or ATT?
I am on my third Fuze.
First day when I upgraded to Fuze the screen started doing this. So I took it back to AT&T for replacement. On the drive back home screen on second device started doing exact same thing. Took it back and got yet another replacement. This one works, but I have seen it happen once or twice in the 3 or 4 months I've had it.
AT&T also told me when I got this phone that it was the last exchange I could make for the 90-day exchange. If I had another problem I'd have to send this back to the company. WTF is that all about? You're going to inconvenience me because you keep giving me bad eggs? At least this one works right.
Is anyone with a Touch Pro having the same issues? Or is it all just us AT&T customers?
I have an O2 Xda Touch Pro. The only symptom I have that remotely resembles the ones listed here is the flickering at the bottom. But, in my case at least, the flickering is caused by a particular shade of gray displayed in Opera...and that's the only time it happens. So, again for me, it seems to be a software issue.
Drew
Flickering is another side affect that mine occasionally has... just in the bottom 1/5th or so of the screen... Most easily seen when in landscape mode in messaging.
those are all hardware issues too, its just only being displayed because that certain shade of grey is whats making it visibly noticeable.
Well, we'll see if replacement number 4 has the same issues soon...
They actually offered me a BlackBerry Bold/9000 as a replacement phone like it is even in the same universe.
Hardware differences?
Anyone with a buggy Fuze want to post the part number / sku number etc...? Maybe we are looking at a bad batch or a bad but unannounced hardware version?
I had this too on energyrom, I allways passed it off as a touch flow 3d opengl issue which would draw to the screen.
But thinking about it, it does occour when the device is hot, and the screen flickers also.
But It allways goes away after a soft reset for me.
Vodaphone UK TP
I have this problem too :/
Well, I just got my replacement, and it is doing it as well. I'll post some screen shots of it later on today.
Anyone want to tell me what numbers we want/need?
Hi guys
I have a screen problem with my SSGS i9000 - really hope you can advise a novice like me.
Yesterday, all of a sudden the screen looked really washed out, like the contrast/gamma had been turned up too far. Gmail, internet, pictures and videos are looking really pale and not clear - washed out and cloudy. The end call button more orange than red, battery indicator looks fuzzy. In phone settings the screen is set to lowest brightness.
Exactly this same issue occured in June last year when the phone was 7 months old. I took it to my supplier here in the UK (Carphone Warehouse). The onsite engineer updated the software to the then latest version - Gingerbread & 2.3.3. This cured it. All has been fine since, until yesterday.
Based on my previous experience I decided to check for software updates on Kies. Kies updated it to 2.3.5. Screen problem remained.
On advice of a friend, he suggested a "proper" reinstall - I read up about ODIN and last night took the plunge and I flashed the phone to:
Firmware 2.3.6
Kernel: 2.6.35.7-I9000XXJW4-cl1043937
Build: gingerbread.XXJW4
The phone is working beautifully, but the screen problem remains.
My question is is there anything else I can do on the software/reflashing of the phone to sort this issue? Is there anything I've missed or should do? Or has the screen had it and require replacement? ie. is it a hardware fault?
I should add, I hardly use this phone. It gets very very light use as a second phone largely for gmail. I get 4-5 days out of it on standby - that's how little it's used!
Hope you can help me.
Cheers in advance
ace
the SAMOLED is a wonderful piece of technology, but it isnt without its flaws. In particular the Blue emitters 'burn' out quicker than the other colours. This is affected by certain variables such as the average screen brightness, how long the screen has been on for (total on life time) as well as the infusion of the AMOLED matrix during manufacture.
IMO your screen is fine. on some mods, you can change the phones render effect, by making the white tone shift more blue / red / green. If this issue is really bugging you, try find a mod that enables you to make this change.
Cheers for the reply.
The low level of use is what puzzles me as to why this issue could have occured.
Common problem with all SGS. Bound to happen sooner or later. Just learn to live with it, unless you are under warranty, and can get it replaced by Samsung.
Sent from my HTC Desire S using xda premium
Cheers Olly, so it's hardware failure?
Out of warranty now so I guess live with or replace?
Ace571 said:
Cheers Olly, so it's hardware failure?
Out of warranty now so I guess live with or replace?
Click to expand...
Click to collapse
Unfortunately so mate :/
I think you could probably get it replaced by Sammy, but you'd have to pay them, as your warranty is gone.
I'm suffering similar problems ROM my Desire S with a SLCD screen, I'm slowly learning to live with them!
Sent from my HTC Desire S using xda premium
Cheers Olly, appreciate your input.
I have had a CS918 box for around 4 months and it largely works very well, however every now and then (once an hour maybe, sometimes two or three times in the space of a minute though) the screen goes blank for a second or so, the sound also cuts out for this period of time also.
I was using stock firmware, recently updated to a 1080p kernel and custom rom, but this still persists.
I've changed the HDMI cable and the slot it's in also.
I'm leaning towards a dodgy power supply - has anyone else had this issue?
Many thanks
Hammer_drum said:
I have had a CS918 box for around 4 months and it largely works very well, however every now and then (once an hour maybe, sometimes two or three times in the space of a minute though) the screen goes blank for a second or so, the sound also cuts out for this period of time also.
I was using stock firmware, recently updated to a 1080p kernel and custom rom, but this still persists.
I've changed the HDMI cable and the slot it's in also.
I'm leaning towards a dodgy power supply - has anyone else had this issue?
Many thanks
Click to expand...
Click to collapse
I've just bought one of these boxes and am having this issue. I've tried searching everywhere for other people having this problem and this is the only post I've found.
Has a fix ever been discovered?
Johneboy said:
I've just bought one of these boxes and am having this issue. I've tried searching everywhere for other people having this problem and this is the only post I've found.
Has a fix ever been discovered?
Click to expand...
Click to collapse
I also have an issue with mine, and the answer seems interesting and related.
With mine the image flickers sometimes, and needs to be reset, other times the audio will just go quite for 2-3 seconds.
It very well could be a power supply issue, as it seems to be slightly loose, but the interesting thing is that the video keeps playing perfectly when the sound goes out.
It does the sound thing much more often now that it did before too.
got the same audio issue ... could it be the hdmi cable?
I have the cs918+ and have the same blackout issue I update the firmware frequently but still happens...
Sent from my SGH-M919 using XDA Free mobile app
I've read a few threads on the screen Flickering and there doesn't seem to be any resolution .
I'm on my 3rd tablet now (thanks best buy accident damage warranty!) And this one is flickering worse lately than ever. I updated to the latest firmware, yesterday only to boot up to horrible bouts of flickering during the setup screens.
The odd thing is, there seem to be no consistency to it. Some days it's so had I can't even use the thing, other days it doesn't happen at all. I use the tablet every day for notes or PDF viewing. I've used it with no magnetic cover (totally naked) and with the cover.. doesn't seem to change the occurrences.
I've turned overlays on/off force gpu render on/off.. nothing seems to fix it. Sometimes changing the overlay will reduce the flickering other times it doesn't affect it at all.
I hate to say it, but if I can't resolve it, I'm going to be forced to move to the surface 3.
I'm an electrical engineer and I've done as much trouble shooting as I can think to do.. but I've come up empty handed.
Anyone else have these problems? Has anyone found a definitive fix?
I sent mine back 3 times. The first was a reset. Thanks for wasting my time. The second was a motherboard and that didn’t do it. The third time they did a motherboard, digitizer, and usb port. It's finally stable and back to normal. After 5 trips back, the BB warranty triggers a new unit. Check if it triggers a refund.
I get it occasionally, so far I'm able to resolve it by booting into custom recovery (TWRP) and clearing dalvic to allow all apps to rebuild. Sometimes this resolves it for a few days, sometimes a couple of weeks. Its a repeatable "fix" that makes me question if the issue is related to memory or trim or something like that. Kind of reminds me of how with the first generation nexus 7s one would see slow downs after a while and filing storage with fake data then deleting it would improve performance for a while.
I'm definitely not a tender user of the device. I go back and forth between multiple ROM's and kernels on a daily basis testing what is testable, and unfortunately also what is not. Anyway, even though mine was bought as refurbished on eBay, I have never had any issues like the ones you describe. More specifically, I have never had any issues what-so-ever, that was not created due to my own ignorance. To me the device seems indestructible.
Besides, I would hate to be in the place of my device, or I would definitely have turned schizophrenic. Should I feel bad about pushing it through all this?
Because we're trying to figure out if it's related to a specific device type, which one do you have? P900, 905, 907A or another?
ShadowLea said:
Because we're trying to figure out if it's related to a specific device type, which one do you have? P900, 905, 907A or another?
Click to expand...
Click to collapse
P900 wifi. Us version bought at best buy.
Today the tablet has been rock solid, I have literally done nothing between when it was flickering like mad and now.
I wonder if it might be related to some kid of data transfer. either over wifi, or when data is written or read from storage or SD card. I've take then SD card out to eliminate that as the problem.
Mine was P900 from BB
Issue lies with the screen.
This happened with me I sent it back to Samsung, 3 times. They seem to have finally got it right. They replaced the battery and then the display screen. Now it appears to be working I will let you know after a month if it is still good. They also told me that they will not replace the device even though I bought it and the issue was right from the start. Not even 6 months old. When working the device is excellent.
Ah, so now we know for sure the battery is replaceable. That's good news. Maybe someday our batteries will no longer hold a charge and we can replace it. Now for a good video on tear down and what tools to use to do that and where to get a replacement battery. I know it's early for most of us but someday......we will have to replace that battery. I'm one of those that keep my toys (computers/laptops/tablets/phones,) for many years.
Mine is running like new since last service. Getting the BB Geek Squad warranty has paid for itself already. I get 2 years on anything over $500.
Mine is a p900. I purchased from samsung website. Mine has been doing it fresh out of box. So bummed.
Ive had my 12.2 since march and it recently started flickering. It seems to tuen of the screen for a millisecond especially when lots of refreshes happen. Like scrolling a pdf. A few days back it was bad. Now it has gotten better and I havent noticed anything.
{Diemex} said:
Ive had my 12.2 since march and it recently started flickering. It seems to tuen of the screen for a millisecond especially when lots of refreshes happen. Like scrolling a pdf. A few days back it was bad. Now it has gotten better and I havent noticed anything.
Click to expand...
Click to collapse
My P900 has just begun flickering exactly as you describe. So I should just be patient and hope it goes away by itself?
I'm flickering again. Turning the screen brighter is what triggers it for me. Returning to stock just to get it back and have it flicker again to hit the magic 5 returns may be what I have to do.
https://youtu.be/CvxbVft69Kg
I just followed this guide. Its been a week now, not had any flickering since I did it.
Manya3084 said:
I just followed this guide. Its been a week now, not had any flickering since I did it.
Click to expand...
Click to collapse
Lifting the motherboard only temporary close the gaps of cracked battery connector. The permanent fix need to do: re solder the battery connector.
Look closely under magnified glass or microscope , you'll see the cracked solders. You can test by pushing the connector slightly, a bad one will move easily or lift off from its solder joints.
This video was removed from the poster after I pointed out his guessing solution. Flickering screen has nothing to do with LCD connector on the motherboard.
Lifting mother board actually you're applying pressure on the battery connector from rear cover.
I have had my P900 sent to Samsung service twice without having the screen flicker fixed. I thought this was a known problem and that Samsung themselves should be aware of it? Maybe I should supply some XDA links next time...
Skickat från min SM-P900 via Tapatalk
bluebirch said:
I have had my P900 sent to Samsung service twice without having the screen flicker fixed. I thought this was a known problem and that Samsung themselves should be aware of it? Maybe I should supply some XDA links next time...
Skickat från min SM-P900 via Tapatalk
Click to expand...
Click to collapse
Depend on where you send for service, they know how to fix it now. Service Centers actually are contractors provide services for Samsung and others, the fact that most people don't know.
http://forum.xda-developers.com/showpost.php?p=59573206&postcount=100
It Works. Battery connector replaced. Smoooooth
After 2 visits to Samsung , my unit finally works fine.
Motherboard and LCD were changed first time. But issue persisted.
Second time, battery connector was replaced. Since then it has worked very very smoothly.
Beut said:
Depend on where you send for service, they know how to fix it now. Service Centers actually are contractors provide services for Samsung and others, the fact that most people don't know.
http://forum.xda-developers.com/showpost.php?p=59573206&postcount=100
It Works. Battery connector replaced. Smoooooth
After 2 visits to Samsung , my unit finally works fine.
Motherboard and LCD were changed first time. But issue persisted.
Second time, battery connector was replaced. Since then it has worked very very smoothly.
Click to expand...
Click to collapse
Thanks, missed that other thread. Next time, I'll send them an en explicit request to replace the battery comnector, and refer to those two threads.
Stefan
Tapatalked on some kind of Samsung tablet
Description of the problem:
This happens several times in a day, but I have had a few days when this did not happen. When waking the phone it becomes super slow, like 1-2 frames per second slow. After rebooting- the recovery is just as slow. Sometimes the view is moved vertically up, the top part that is moved outside of screen and is drawn ant the bottom. Sometimes the image flickers. I have not noticed any pattern what stops this behaviour, it is just over after some time (5s to 2 hours).
What I have tred with no success:
Rebooting, clearing cache, factory reset, bringing the phone to full stock (http://forum.xda-developers.com/oneplus-one/general/tool-oneplus-one-return-to-stock-t2970390), updating to latest version, several ROMs and different kernels with each of them. After flashing any new rom the phone used to work fine for a day or two, then the stutter reapeared. Tried it without installing any apps- same problems.
I had to replace the cracked screen and the camera that didn't focus to far objects. The touchscreen ribbon is now insulated from the metal LCD back since some people suggested this might be the reason for touchscreen responsiveness issues.
It seems that the processes work normally, but the view on the screen is updated slowly.
What made the problem less bad:
I had applied a glass screen protector. Removing it increased the time between slowdowns.
Since I bought the phone secondhand and had tinkered with it I cannot get it replaced.
I have tried everything I could, now I need your help
Any suggestions?
A video to visualize the issue: https://www.youtube.com/watch?v=h8z06xnlqk8
Noone? No ideas?
Hi,
Sounds like a Hardware issue to me.The board ist mostly bad soldered. It can happen sometimes in the factory(not only at OnePlus, Samsung, HTC too), even if they test the devices before shipping.
Background: We had some germans around here had the same issue, they got a new replacment by OnePlus, OPO support told the customers that the hardware was faulty.
Can u afford another Mainboard for the OPO ? That will fix that issues for sure.
Well that makes sense I'll poke around to see if I can get one for as little as possible. So far I'd expect to spend ~250$ and that is just bad business
no worrys, u dont need to spent that much.check aliexpress or if your lucky buy a dropped OnePlus One on eBay. One with working mainboard. It will cost around 30-50% less than a single Mainboard would Sounds ridiculous but its true.