DISCLAIMER:
Rooting your phone and using custom Recoveries and ROMS have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledges about phones and phones utilities too.
Make sure that whatever you do, you are doing it at your own responsibility.
This guide may be obsolete now for the new MTK SOC's powered phones, but it will give you some ideeas about how MTK phones world works (especially if you are new to this).
Why this thread?
- Because of all those PMs I receive with questions about how to do this or how to do that.
These things aren't they covered here on XDA?
- Some of them are, some don't, or they are spread over the forum in different sections, different threads. Also I will present here my vision about how to do things, and in some parts is different than the others existent.
I tried to document all steps with images for a better understanding, and to make it easy for people who don't understand well English (also I don't claim that my English is very good, but I'm trying).
1. If you want to use your phone as you buy it, then this thread is not for you, but if you want to use a custom recovery, to install a custom ROM, or some modds, keep reading.
2. First big step in our journey is to root your phone, which most of you know that means to get root (administrator) access to your phone's OS - just a simple definition. With an unrooted phone, you can't do much, and that means you will use it pretty much as you buy it - see first point.
There are multiple methods to root your phone, through an application from your phone, with an executable software from your PC or by flashing a zip modd from recovery (only for custom recoveries).
A. The best rooting application at the moment (in my opinion), is Framaroot.apk, developed by alephzain - please stop by his thread and drop a thanks, or if you can buy his donnation app from Playstore to support his work. You can download this app from official thread.
B. For rooting with a software from PC, I know three big candidates: oneclickroot, kingoroot and srsroot. I know there are more, but I mentioned only the best known.
C. Rooting zip archives are two, to choose from: chainfire's and koush's. Although, these require to have a custom recovery installed.
Any method you choose, be sure to check the phone models reported to work for, and look for your model.
Next, I will present step by step what I call "the beginner's routine":
root the phone;
make a nvram backup;
make a stock ROM backup;
generate a custom CWM and flash it;
patch to unsecure the boot and flash it;
get a Root File explorer;
create a custom recovery by porting one.
Prerequisites:
you must have an account on XDA; if you don't, then create one - and remember, at beginning you will not be allowed to post but you can hit Thanks for people I will mention here.
use a computer with Windows XP or 7 (I don't know if it will be any problem in vista or windows 8, but I didn't tried them, so I can't tell).
a phone with MTK CPU, obviously!
these tools:
MTKDroidTools of rua1's - download it from his thread and hit Thanks or donate to him, please
SPFlashTools or MTKFlashTools.
MTK USB Drivers and your phone manufacturer's USB Drivers if they provide that.
For MTK USB Drivers, there are many sources, but I couldn't find any official source. Few known sources: here and here.
* ADDED: For windows 7 and xp I repacked all MTK needed drivers, bundled with latest google usb drivers and using windows driver installer. Some of the drivers are not digitally signed, so when the prompt window ask you if you want to install unsigned driver (it will be several times) select yes or ok. The advantage is that this method is easier than manual method and also will create an entry in installed programs, and later if you want you can uninstall them in control panel uninstall program. Before installing this you need to remove old drivers installations - use usbdeview (download it x86 or X64), and look for VendorId 0bb4 and 0e8d, and uninstall every device with these Ids. Packed drivers are attached to this post; take what corresponds to your windows version. Unpack the archive, open the folder and run dpinst.exe. More info inside: read info.txt (especially for XP).
Install all needed drivers.
A good text editor (Notepad++ or Geany) installed.
Adb installed in your computer from Android: here, here and here you can learn how.
Credits and Thanks:
@alephzain - Framaroot developer
@rua1 - developer of MTKDroidTools
@Chainfire - SuperSU developer
@Koush - so many things!!!
@michfood - developer of Boot Recovery pack/unpack tool
and, even if it is not presented here, but because I use a lot his tools in Linux:
@bgcngm - for his Unpack/Repack scripts
1. Root the phone.
For this step I choose to use Framaroot.apk, first because I don't like to install unnecessary software on my computer, and second because it supports a very large number of MTK phones. So, go to alephzain's thread and download the apk, then connect your phone to PC with USB debugging enabled, turn on USB Mass storage and copy Framaroot.apk to your sdcard root, or in internal storage if you don't have a sdcard in your phone. Eject phone's USB storages from PC, and turn off USB Mass storage from phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Go to apps drawer, find File Manager, open it, navigate to location where you placed Framaroot.apk touch on it and install it. After that go back in apps drawer and open the newly appeared Framaroot. In that window you have to specify which exploit to use for getting root access. If you don't know it's not a problem, you can try each one until you see the Success message (for me was Barahir). If none of them works, then you have to find a different method to root. After success patching, reboot the phone and then you will see SuperSU.apk in your apps drawer. Now you have root access!
2. Install a Root Explorer.
I prefer ESFileManager, but you can choose what you like. This can be installed free from Playstore, or if you have it downloaded in your PC, use same steps as in Framaroot case, and install it.
Then open the app and let's activate the Root Explorer in it.
But, here you can choose a different view style instead of default big icons - I like Medium Icon view.
Touch on Globe symbol from upper left corner to open Advanced Tools menu, and select Tools (last one). In the list that opens, scroll down until you see Root Explorer entry and touch "OFF" button to activate it. You will be prompted to Grant Superuser access - Grant it! Then, touch on "Root Explorer" text and in the popup window select Read/Write, and in next window select all radios from RW column.
That's it, ESFileManager is now a powerfull Root Explorer.
3. Make a backup.
This means actually make two backups, one for nvram and one for the whole stock ROM. Why to make a backup for nvram? Because it is very easy in MTK phones to mess up with it, and you may loose IMEI, mac address or to have other connectivity issues. This backup will be your insurance.
For this you need MTKDroidTools. Download it from rua1's thread (link in OP) and unzip it in a folder named "MTKDroidTools" on your primary (system) partition - this is important, and in other locations you may experience errors and malfunction.
Connect your phone in usb debugging mode to PC, then start MTKDroidTools as administrator and wait untill you see that MTKDroidTools recognize it and loads its data. The following pictures will show you how to check if you have usb debugging activated, and how MTKDroidTools looks with loaded phone data. In most of the phones, adb gets root access immediately, but in some "branded" ones that has to be achieved by click on the "ROOT" button next to "Adb Terminal" - Notice that if you don't see that ROOT button, that means you have already "root in shell". Also, if you have chainfire's SuperSU you will be prompted in the phone to grant root access to adbd, but if you have koush's Superuser, adbd gets root access by default.
Now, as I said first thing is to do a nvram backup. Click on "IMEI/NVRAM" button and next select both methods (bin and zip folder) and click on "Backup".
After that, it's time to do a stock ROM backup. This is important if you are going to try different custom ROMs and modds. This will assure you that you always have a way to start from the beginning in a clean state. Also makes easy to unbrick your phone if you have the misfortune to brick it.
Click on "root,backup,recovery" tab, and click on "Backup" button, then wait to finish. Be patient, this will take a while, and you can see progress logs in side window. At the end, a popup will prompt you to pack the backup. Now you know it is finished. I don't pack these backups, but you do what you think.
In this stage first thing I do is to generate a scatter file. You have one in that backup made before, or you can get one from stock firmware archive if the phone's manufacturer provide that, but let's see how to do it as it is, to understand the process, or to learn how to get one if we loose it or we are unsure if the one we have is good for our phone (this is important, because using a wrong scatter file it may damage your phone).
So, return to "Phone Informations" tab and click on "Blocks Map" button. A window opens with your phone partition structure. Click on "Create Scatter File" button and save it somewhere in your computer.
Mission complete for backup; you are assured now.
4. Generate a custom recovery.
This is mandatory if you want to use an easy way to backup, restore, flash or wipe ROMs and modds. Fortunately, rua1 has included in his tool all you need to generate one for your phone. This method is successfull for almost every MTK phone, but not for all. There isn't an universal method for anything.
So, enter again in "root, backup, recovery", select the radio "To choose the boot.img file" - by default is selected "Install already prepared files" - and click on "Recovery and Boot" button.
When prompted, select the boot.img from previous backup folder and click Yes to make CWM recovery automatically. First you will be prompted to flash a patched boot.img in your phone - click Yes to get an unsecured boot, then next message will ask you to install the new created recovery in your phone. Click Yes and Yes to reload the phone in recovery mode.
The phone will shut down and reboot in recovery. Now you can see your custom recovery in place.
GOOD TO KNOW: you can't generate a recovery everytime you want to flash one, to use MTKDroidTools for flashing, and the adb method may not work for many MTK phones.
The most known method to flash a new recovery is by using SPFlashTools or MTKFlashTools, and an alternative method is with MobileUncle application from phone, but I will show detailed the FlashTools method. One thing though: if you want to use MobileUncle application, you have to use it from /system/app folder, not from /data/app. Many users say that the MobileUncle doesn't work to flash recovery: it show success, but rebooting to recovery reveal the old one. The reason? They installed MobileUncle from market, and that place the app in /data/app as a user app. In custom ROMs where the app is placed in system by ROM developer, the problem won't manifest. So, if you want to use MobileUncle, make it a system app not user app.
In order to do that, grab a copy of any of these tools from DR_MOOSAVI's thread (link in OP), unzip it in a folder "MTK_Flash_tool" in your primary(system) partition (C in my case), and notice the name have to not contain any spaces or special characters. In that folder create a new folder "Resources" or ROM or whatever name you want, also without spaces or special characters, and place in it your scatter file and recovery img you want to flash. Open Flash_Tool executable as administrator.
IMPORTANT: Your phone is not connected to the PC now. Swtich it off and wait, you will connect it later.
Continue in next post.
In Flash_Tools program window click on load scatter file, navigate to that folder you created and select your scatter. Now you can see your phone's partition structure. If the recovery you want to flash is named "recovery.img" it will be selected automatically, if not you have to click on recovery row in Location column and select your recovery from that folder.
Then click on "Download" button.
Now connect your phone to PC, just like that in power off. Some models enter automatically in download mode and the flashing process begins, but others don't. For some it is necessary to connect them without battery (battery removed), other need to press briefly Power and Vol Down button at same time and release them immediately. That you have to find for your phone from forums, other users, or by trying. When the phone enter in download mode you will see a red bar down in Flash_Tool window, followed by a yellow or other color one (that means the flashing process is taking place).
At the end a popup with a green circle or green checkmark will let you know that the flash was a success. Deconnect the cable and reboot the phone, or reboot it in recovery to see if the wanted recovery is installed. The most common method to boot in recovery from power off is to press Power and Vol UP at same time, and keep them pressed untill you see the logo, then release Power but keep pressing Vol Up untill the recovery UI appears. If Power and Vol Up doesn't work for you, start the phone normaly and connect the phone to PC, then open a command prompt window, and type " adb reboot recovery", then hit Enter during bootanimation. The phone will stop loading and will boot in recovery.
5. How to port a custom recovery.
Check my new guide.
Check my new guide.
Awesome Tutorial!!! U did it again....
Thanks!!!
Thank you sir I will try to port cwm to my mtk mobile
Sent From MTK-MT6572
---------- Post added at 03:31 PM ---------- Previous post was at 03:01 PM ----------
Sir now my mobile with ext4
Now in your thread about porting carliv cwm.. there is only custpack and ubifs ...!! Where is for ext4
Sent From MTK-MT6572
carliv grt work hope u add this post too http://forum.xda-developers.com/showthread.php?p=49081376
[email protected] said:
carliv grt work hope u add this post too http://forum.xda-developers.com/showthread.php?p=49081376
Click to expand...
Click to collapse
Thanks, but that is not something for begginers. Maybe meteos method with his app will be, but I'm not sure. Though, if someone want to procede to do that, you can edit your post and give more details, for people to know what is about, and to follow your link if they are interested.
Great guide @carliv.
Just a bit confused, as I usually flash custom recovery first before rooting my MTK phones (same goes for all my android devices). So, maybe, rooting and flashing custom recovery is interchangeable as the first step for MTK phones depending on their availability.
iZLeeP said:
Great guide @carliv.
Just a bit confused, as I usually flash custom recovery first before rooting my MTK phones (same goes for all my android devices). So, maybe, rooting and flashing custom recovery is interchangeable as the first step for MTK phones depending on their availability.
Click to expand...
Click to collapse
Yeah, well the next step in my guide is "do a stock ROM backup", and if you flash a custom recovery, that will not be a complete stock backup. With my method, any time, after flashing the stock backup, unroot and you will be in stock initial state.
I hope it's more clear now.
carliv said:
Yeah, well the next step in my guide is "do a stock ROM backup", and if you flash a custom recovery, that will not be a complete stock backup. With my method, any time, after flashing the stock backup, unroot and you will be in stock initial state.
I hope it's more clear now.
Click to expand...
Click to collapse
Got it. So this is more suited for those who do not have the original firmware for restoring their devices in case something goes wrong which is so like MTK phones. In any case, your guide is spot on. Hope the moderators would give this a sticky, if possible, since MTK phones are scattered all over xda.
How to Port to Device that have recovery-from-boot.p
Hello Everyone, and hello to @carliv,
Thanks to this Tutorial I have Manage to port in on a MT6582 and MT6572 Device with ext4 partition, but I just want to share some tips when porting the latest build of the carliv the tutorial here is complete except for one thing just in case you are ending up on a custom recovery not booting up and when you use the MTK Droid Root and Tools you will see this
-->Connect Device<--
there is a file blah blah - recovery-from-boot.p <----
Now that mess up the things but before we dig into that let me first share on how I got my Carliv Custom Recovery to Bootup
on the Tutorial there is a section that you need to use the MTK Unpacked tool right now once you have done that do all the other things that is written in the tutorial it will guide you on the whole process but on my end even though I followed the tutorial and all are correct I still end up on a Bootloop well I discovered that you need to copy the init file from the RUA1 CWMR that you got from the MTK Droid Root and Tools and overwrite the one on the Carliv Recovery after that once you have finish until on the Overwriting of the Kernel and Kernel header pack your Carliv Recovery using the MTK pack tool and now Flash it on your Device it will now boot :highfive:
BUT WAIT!! yes! it will boot but it will boot on the STOCK RECOVERY and that is because like what I said the recovery-from-boot.p is the culprit of the issue now you need to root your device which is on my end I used framaroot and then download the ES file manager and also follow the instruction of carliv on how to have the full ROOT R/W access and on your device, once your have done that got to this folders and delete this 3 files.
Be sure you have the R/W access or else this files will not be deleted
/system/recovery-from-boot.p
/system/etc/recovery-install.sh
/system/etc/recovery-resources.bin <--- I am not just sure if this is the right filename but it is almost the same will check it once again once I got to stock rom again :fingers-crossed:
and now once you have rebooted your smartphone to recovery mode it will now boot to the Carliv Custom Recovery.
But also take note that if you don't have that 3 files on your device your just good to go and it will boot to Carliv Custom Recovery without any issues.
it's just that 3 files makes the custom recovery always boot to stock recovery even though you do something else
hope this tip helps for some people having issue on a bootloop carliv custom recovery on doing the manual porting
and don't forget to hit the thanks button if this helps :victory:
rnovino said:
/system/recovery-from-boot.p
/system/etc/recovery-install.sh
/system/etc/recovery-resources.bin <--- I am not just sure if this is the right filename but it is almost the same will check it once again once I got to stock rom again :fingers-crossed:
Click to expand...
Click to collapse
Removing recovery-from-boot.p is enough, I think. Besides, CTR asks if you want to disable recovery-install.sh. That prevents the ROM from flashing stock recovery.
iZLeeP said:
Removing recovery-from-boot.p is enough, I think. Besides, CTR asks if you want to disable recovery-install.sh. That prevents the ROM from flashing stock recovery.
Click to expand...
Click to collapse
it depends on the unit, I just deleted the recovery-from-boot.p and still it boots up on the stock recovery that's why I needed to trace other files that still makes it boot on stock recovery, but then again not all units will have the same issues as mine
Thanks for your help, it works with my Huawei Honor 3X (mtk6592) !
Thanks Man!
Error
Please help me in porting recovery.I am getting error "the syntax of the command is incorrect " in all four files.
View attachment 2654172
View attachment 2654177
GUIDES Collection 101-Romdump, CWM, Backup, Flashing, Editing, etc
Hi Guys one thing i have seen is that when many people make tutorial in Forum they do not consider making downloadable copies (Documents,Vedios,Pictures)of their tutorials for the viewers to download the results are-
They have to go online when working on the smart phones (Not Everyone Has Internet)
Sometime the images or the files expire thus you lose the important parts of a tutorial
Vedio might get blocked
The Site Closes Down
The reader might forget where the site is located
I have seen that many people would like to keep hard copies of these tutorial with themselves rather than keeping it on the web eg: People like to download mp3 rather than streaming music online...LOL.:silly: So i have copied, pasted, Downloaded These Sets Of Tutorials.
Some are word by word and some i have modified to Make it easier, Some of them have a merger of two or more tutorials to be better understood. Also some of the procedures might have two documents inside a single folder as i fealt that one is as important as the other and their merger might result in the loss of information
IMPORTANT
Remember that i have tried to make these tutorial as easy as possible but you must read and understand the whole thing before screwing with your phone
You must do some more research to be hundred percent sure (That is if you don't mind screwing your phone)
Most of all you must have common sense before proceeding
I am not responsible for what you do to your device but i will always try to help you
I shall first start with uploading tutorials of MTK Devices,SP Flashtool,MTK Droid Root & Tools GPS Error Fix Romdump.......bla..bla..bla...But soon i shall try to add more and more and improve the storage
Of course you are also important in helping just post a link and i shall check it and if needed will upload it in doc or media format:highfive:
I Shall Also make links to important softwares and links also
Hope this helps if so please press the thanks:good: button it would mean a lot:fingers-crossed:
Folder And Files Structure Tree
Tip-If the letters are coloured it means that is a folder....
Documents
1) Documents-Part 1
-Break screen pattern lock of any Android Phone
-Fix IMEI MTK Phones Droiduncle
-Fix Wifi BT Mac Adress (NvRAM error)
-Flash ROM To MTK Devices Mobileuncle
-Images In The ROM
-Install Flashtool Drivers on Windows 8
-Install MTK USB driver on Windows
-Lenovo A-3000 Factory Mode Translation
-Pull OTA Updates
-Creating Stock Flashable ROM.zip
--Get Stock ROMFirmware Cherry Mobile Flare 2x and others to PortingCustom ROM
-CWM
--How to Install CWM to you MTK Device
--To Port A CWM Based Custom Recovery
--To Port Device That Have recovery-from-boot.p
-GPS
--Fix GPS Issue With MTK MobileUncle
--Fixing GPS issues for Android MTK devices.
-MTK Droid Tools
--Backup Your Rom With MTKDroid Tools
--Change IMEI MTK Droid Tools
--Create CWM From The Device Recovery
--Make A Scatter File
--Make CWM Recovery From .img Backup
--MTK Droid Tools UBIFS Error
--Prepare MTKdroid Backup To Be Flashed With SP-Flash Tool
--To Make An Nvram (IMEI,MAC) Backup
-SP Flashtool
--Flash CWM With SP Flash Tool
--Problems and errors when using SP Flash Tool
--Scatter File and Dump ROM Without MTK Droidtools
--Use Sp Flash Tool
--Make CWM, Root Using SP Flashtool
---1) Make CWM, Root Using SP Flashtool
---2) How To Build CWM
--SP Flashtool Readback Backup
---MT6572 SPFlashtool Read Back Backup
---MT6582 SPFlashtool Read Back Backup
Documents Archieves
-1) Documents-Part 1
Vedios
-Create CWM From The Device Recovery.mp4
-Create CWM In Unrooted Devices.mp4
-Fix GPS on MTK Phones.mp4
-How To Backup Using MTK Droid Tools.mp4
-How to make a scatter file.mp4
-How To use SP Flash Tool.mp4
-Install Custom Recovery using SP Flash Tools.mp4
-Install Flashtool Drivers On Windows 8.mp4
-Make CWM Recovery From .img Backup.mp4
-NVRAM Backup MTK Droid Tools.mp4
-Prepare Backup To Flash With Flashtool.mp4
-Rooting using MTK Droid Tools.mp4
-Unbrick Cherry Mobile Omega HD 2.0.mp4
Drive Storage
Documents Download
Link
Archives Download
Link
Vedio Download
Link
ENJOY
Important Software Links
Reserved
App Links
Reserved
Changelog
31/7/2014-Thread Started
thanks for all of these.... im looking forward to root my device soon.. by the help of this thread.. keep up..:good:
Thank you very much for the obvious effort.
Will try it and recomment.
anandisrocking007 said:
Documents Download
Link
Archives Download
Link
Vedio Download
Link
ENJOY
Click to expand...
Click to collapse
hello anandisrocking007,
thank you very very much in advance for your great efforts beyond these research over the topic. but i think newbies like me, get a little confusion by whole these documents. i personally have worked with smart flashtools to flash customs deoxcided ROM , but right now really got confused by bunch of information.
i have lenovo A3500HV and the same mt6582 as your device.
now i have a respectful request that could you please clarify me how can i exactly go through the following steps :
1- how can i backup whole my factory ROM and restore if i need it in future?
2- how can i root this lenovo ?
( if you finally root your own device i'll be so grateful if you provide me with the recorded movie on these two question )
by the way for your consideration there is not even a single clip on YouTube for this matter and you can also upload these two step over there for millions of people and im sure any individuals thanks you from the bottom of the heart
HERE IS THE FIRST OFFICIAL
CWM FOR KARBONN TITANIUM S20
ORIGINAL BOOT N RECOVERY .IMG
join FB GROUP:::<ww.facebook.com/groups/323894334469784>
sTOCK ROM (SOON BE UPLOADING)
Site ::: karbonnts20.blogspot.in/
nEWBIE PROBLEM THATS WHY LINKS ARE NOT ALLOWED TO POST
Rooting KArbonn Titanium s20
#Requirements:
"I am not responsible if you brick your phone"
CWM recovery (Link)
SU & Binary files (Link)
Use SP Flasher v 5.0xx to flash (Link) .
Download the scatter file MT6582(Link)
#Procedure :
Open SP flasher and choose scatter file Mt6582_android_emmc.txt
Goto recovery link and choose the CWM recovery (downloaded).
Now connect your device in switch off Mode with its battery inside and Download it
Now open CWM by pressing Vol up+Power Key
Choose "Install zip from sd card" >Choose zip from Sd card > select the update SU.zip
Reboot and we are done rooting.
for links check the site!!
Repartition Internal SDCARD
As we know this device {MTK6582}comes with 4GB ROM with APP data to be 1GB and user Storage 1.59 GB.
Such small APP space cause a lots of problems Thus best way is to repartition it with HKRom Manager.
For links visit the site :-htp://karbonnts20.blogspot.in/
"I am not responsible if u brick your phone , dead internal sd or so n so .Better do it on your own risk"
Requisites:
Hk rom manager.apk
CWM /TPRW recovery
A full backup CWM or TPRW.
Procedure:
Before you proceed take a full CWM or TPRW backup as phone internal partition may not work or respond sometimes.
Now install the app
Open the app and select mt6582 fast runner (2nd option) ::it will be the only highlighted option .
Choose your required data size (say 2GB , its fine ) and hit apply and now wait.
It will show boot into recovery ,hit yes
After 3 mins you are done. ReBoot it
Now You have 1.8GB APP space and 540MB for storage
"Remember all your phone data will be lost as phone is re-partitioned and Formatted. "
thanks to XDA
Ways to extract stock rom
How to Extract Stock Rom {Detailed procedure with Video tutorial}
FOR LINKS PLEASE VISIT THE SITE :- []ttp://karbonnts20.blogspot.in/[/url]
"This Tutorial is applicable MTK devices "
Required :-
SP flasher- [ttp://sh.st/o9xC5[/url]
MTK Droid Tools- [tp://sh.st/o895X[/url]
Scatter file
ABD Drivers
Ways to extract stock rom:- Video Links
1.Case I:- "If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled "
Tutorial Visit:- ttp://sh.st/ocUme[/url]
2. Case II :- An Android Phone having CWM (with or without Root)
Tutorial Visit:- ttp://sh.st/ocOaC[/url]
3. Case III :- "A rooted Android phone (with or without CWM) USB Debugging Enabled"
Tutorial Visit :- ttp://sh.st/ocOBw[/url]
Thanks to XDA , and the Developers
Procedure:-
Case-I :If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled
First TURN ON the USB Debugging Option :: ie , Settings>Developer options>USB debugging and install ADB drivers
Start MTK Droid Tools <Provided above> ,Grant the USB debugging request and wait till device get discovered .
Then click on BLOCKs Map and you will get all partition and their length .Here you can create a scatter file also. and minimise the window .\, We would require the location later.
Then TURN OFF the phone . OPEN SP flasher , Choose the scatter file you made or provided in the link.
Then Goto READBACK tab and add a readback file ie ROM_0
Click on ROM_0 and choose the destination Folder .
Now a Box will open and ask for Start address and length ,SET it in hex and do the following
start address:0x0000000 and length 0x7FB80000 [The length of FAT as in scatter file] ,Remember if you want the length shown in block map then just ADD 0x [length] .
Now HIT readback. Connect the Phone using USB with battery inside the phone and wait till its get discovered and yellow bar will represent the work.
It would nearly take 30-45 mins and we got our ROM_0 file.
Again Turn ON the phone and connect with USB debugging ON.
Open Minimised MTK Droid tools and Goto Root,backup tab and Hit Process ROM_0.
It will ask to make CWM recovery from original recovery ,if u want CWM fro your phone here you can get it HIT Yes.
After Processing finished we will get our SP flashable STOCK Rom Files in mtkdroidtools>backup
Hence we are done . And In RESULT we get ,ScAtter File ,SP Flashable STOCK Rom images and CWM Recovery for the phone.
Thank You
Case II:-An Android Phone having CWM (with or without Root)
Here we get CWM Backup For Stock Rom which is good for Porting like purposes.
Keep 3 GB of space empty in SD card.
First Turn OFF the Phone and HOLD UP+ Power Key
Enter to Recovery Menu>Backup and Restore
Hit Backup
After it completes Goto SDCARD>CLOCKWORKMOD>BACKUP
Result we get CWM Backup of STOCK ROM which can be flashed By CWM on Hitting restore in Backup and Restore.
Case-III:-A rooted Android phone (with or without CWM) USB Debugging Enabled
Here we can get CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Connect the phone phone to PC via USB and turn ON the USB Debugging.Keep 3GB SDcard Space
Then start MTK Droid Tools and let it detect your Phone.
Then Hit ROOT button just at Down right.
Let it connect to phone and Grant the SU Permission in the phone.
The yellow mark in down left corner will turn Green .
Goto Root, Backup Tab and Select userdata and cache in Bacup option.
Now hit Backup. It would take and hour or so.
Then click on" prepare blocks for flash tools" and wait .
After it Finishes you have CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Mtkdroidtools>backups>"[Phone name]">!imagesfor flashtool
Hope it help You
Hit like and Share