Related
I am having issues with my Captivate's micro-USB port being loose. This is my second Captivate, and although it's still under warranty, the first one was RMA'd with the same issue. I never drop the phone while charging, etc, and I've tried multiple chargers so I really can't see why this would be happening. Both phones were 1008 versions, not sure if the 1008 is known to have this issue, or if I just have horrid luck. If anyone here can solder / fix the phone, I'm hesitant to go to AT&T again, as last time they made me go to the store and have the person working there verify that the USB port was not broken (luckily it still charged if you held it a certain way, and even more luckily I was able to flash stock before returning it!). Anyways, this phone is a refurb, and I did call and almost get it replaced as soon as I got it, as it had this issue slightly upon arrival, but decided it would be a hassle. It's only been about a month since the RMA, so I'm pretty sure that if I try now, they're going to get very mean about it, and possibly try and send me a bill for the phone, not to mention, the guy at the AT&T store will probably think something is up.
Any ideas are welcome, I love my Captivate, and I was just getting into develping on XDA :S
Sent from my Cappy using XDA Premium App
I actually found a fix to my issue. I actually was looking at it one day, and figured that in theory, it should be easy to fix, so I (CAREFULLY!!!) took a small knife I had and gently bent the inner part of the port up just a tad (it looked like it was too far down, and yes, I know it's supposed to be far down, but not that far), and it actually worked perfectly.
Thats weird... It kinda has to be what you're doing with it, since mine doesn't even have an irregular slight wiggle.
Obviously it could be just your luck but i doubt it.
edit: and who cares if the att dude thinks somethings up... its your $500..
Like I said, the second one actually had the issue upon arrival, but it was barely noticeable (the USB port would work, but if you moved the phone a lot, etc, it'd disconnect, then reconnect). I called in and talked to them, but decided not to RMA because it'd be a pain (in hindsight I should have...), and the problem just got worse.
Is the port internally lose? Or just when you plug a cable in it wiggles alot? Ive heard about people stretching the casing inside the port from alot of flashing (plugging in the usb). But if the hole port moves inside the phone thats no good lol. You should try to locate a nearby device service center and show them the problem and make sure you walk out with refurb thats fine. Dont worry about the people at atnt questioning it. Hell I use to walk in and just say "gps dosent work" and they would switch it out no questions.
What you said makes sense, the port looks like it's pretty sturdy, it's just that the cable wiggles a LOT, and it makes it hard to get it to even register.
I had the same issue but a new cable solved it
Sent from my samsung captivation
erraz said:
I had the same issue but a new cable solved it
Sent from my samsung captivation
Click to expand...
Click to collapse
I also had this issue, i opened up the stock Samsung Cable end to find that two of the four wires had insufficient strain relief and broke off at the solder joints
Oddly enough I had issues with the first cable as well, but I replaced it, and have tried others from my current.
So my USB port is being a little temparmental. It likes to charge only in a certain position. When playing music it does the same thing. Odin same thing. YOu get the idea. Obviously a loose connection inside the phone. Anyone every rip one of these things open and resolder this component? It's only a matter of time before it fails completely so I figure if no one else has done it I might as well give it try. Either that or get more batteries and a charger but that might hose me for Odin!
Have you verified it's not the cable? I had to replace one due to weird connectivity issues.
Sent from my SGH-T959V using XDA App
While your USB port still works, you should probably Odin a stock ROM and send it back to T-Mobile.
It would suck if your USB port completely died and T-Mobile won't replace your phone. It happened to one of the members on this forum. I forgot his name though.
Cables not the problem. It's the port itself. As far as TMOB goes no way to send it back to them. I got out of my contract a month and a half ago and switched to ATT. I like taking stuff apart and trying to fix it so worst case I try and kill the phone. Best case I fix it. Just looking to see if anyone here has ever ripped this thing open. Advice or tips would be great. Obviously I'm not to worried about voiding the warranty.
You could try the Vibrant and i9000 forums, I guess? The Vibrant community has opened their phone to install a FFC, and they might have come across the USB port. It might be similar to the SGS4G.
Just a suggestion. *shrug*
bkoon, that is a really good idea. i the vibrant and 4g have the same chasis, i think. you should be able to follow the video guides on how to add the ffc to the vibrant and be able to resolder the usb port. but you have to be careful with the soldering (im not sure how good you are with it), that could short circuit some things in the phone.
Thanks for the suggestion bkoon. And jager I know how to solder pretty well. Hopefully get around to it this weekend.
bkoon1218 said:
While your USB port still works, you should probably Odin a stock ROM and send it back to T-Mobile.
It would suck if your USB port completely died and T-Mobile won't replace your phone. It happened to one of the members on this forum. I forgot his name though.
Click to expand...
Click to collapse
That would be me. I managed to hold the plug just right long enough to stock get to KD1, and the second trip to T-Mo was successful. $20 processing fee, and the phone arrives tomorrow.
Back when I had a Blackberry Curve, I found a shop to replace the Mini-USB for about $65. That was my next step.
Please let us know how it goes! I'm sure we're curious as to how the insides will be like.
Good luck!
brutuspa said:
That would be me. I managed to hold the plug just right long enough to stock get to KD1, and the second trip to T-Mo was successful. $20 processing fee, and the phone arrives tomorrow.
Back when I had a Blackberry Curve, I found a shop to replace the Mini-USB for about $65. That was my next step.
Click to expand...
Click to collapse
Glad to know things worked out for you.
http://www.ifixit.com/Teardown/Samsung-Galaxy-S-4G-Teardown/4977/1
I know Google is tough to use sometimes so I thought I'd help
avrillapete said:
http://www.ifixit.com/Teardown/Samsung-Galaxy-S-4G-Teardown/4977/1
I know Google is tough to use sometimes so I thought I'd help
Click to expand...
Click to collapse
I've used ifixit numerous times. Fixed my laptop and my friends laptop. Thanks for the link though I would of never been able to find such a site on my own. Must be great to be that smart.
Hi again guys, so this morning i took my Galaxy 4G that was not charging the battery for some reason. And changed the charging port because i thought that was going to be it. Funny enough it didnt do the trick. So i checked, double checked and triple checked the solder points and everything was fine. I can read the 5 volts on the charging port pins but thats it. When i connect the usb to the wall, it shows like charging sequence is starting but then all of the sudden the screen will go off and thats it.
Ive been having a very similar situation with a couple infuse mobos i have, but just similar in terms of charging. If i put an already charged battery on the t959v it will turn on and work just fine. It even recognizes the debbuging mode. In fact after i changed the charging port i applied the unbrickable mod to the mobo and it worked perfectly. But still, battery wont charged. The infuse mobos wont turn on they just get stock in a bootloop. So please if someone knows about some schematic made for this phone or knows the route for those 5volts please help me... I would like to at least check the closest pins where those 5volts are supposed to go before giving up with that phone.
This seems like something bhundven, m4m4n or raverx3x would know... I would pm them . Good luck with the hardware tinkering.
EDIT
Asked bhundven for you. He said he hasn't found any .
No. If you find them, we would like them too.
But I doubt you will find them.
We do have the specification (user manual) for the s5pc110 (exynos 3110). but it is not specific to our phone.
Yeap, thats what i thought. I do have that for the i9000 and the original t959. I mean some pinouts i made myself using working mobos. But i dont have that for the t959v. And since the mobo is not working as it should i dont think i will be lucky trying to check pinouts on a non working mobo.
So, a friend brought me his galaxy 4g so that i could take it apart and check for the pins i was looking for. Shure enough i found them, but too unlucky it didnt matter. It seems like its either an ic or one of those resistors shorted. But anyways thanks guys
Ok people so im editing this post because ive found the solution for my problem. Guess what? So i decided to give it a try to the reflow blower on my soldering station. Since i thought it may have been some soldering points or something that had a lose contact. Well, it was!!! Now i have my galaxy 4G working again. Im going to open it back one more time and try to use flux so that i make sure the solder points are nicely welded. Never seen something like that on a galaxy phone but hey, It worked!!!!!!
I never charge my phone....I bought an OEM external charger that came with 1 battery and then bought 3 OEM batteries for $6.00 each.
This way the only time I need the port is to hook it up to the comp.
Just a thought
Yeah, thats actually a good idea to keep your phone working. But the thing is that i do have a bunch of phones. Many of them because i buy them from friends who have them and something is wrong with them(Phones). So i buy them cheap and use them to test things and have fun flashing or stuff like that. And that one was the case, in fact, i bought it because the phone wasnt charging. But i thought the solution was to change the usb port since i saw the + contact inside the port twisted. But i changed the port and it didnt work. Like i said on a different thread, i work with electronics on a daily basis so for me this is just fun...
enelyam said:
Yeap, thats what i thought. I do have that for the i9000 and the original t959. I mean some pinouts i made myself using working mobos. But i dont have that for the t959v. And since the mobo is not working as it should i dont think i will be lucky trying to check pinouts on a non working mobo.
Click to expand...
Click to collapse
Good day sir I noticed you said you have schematics for Samsung T959. Is this true? I am looking for schematics to apply the unbrickable mod with the xOM5 resistor. Do you have schematic for this? Can you please share?
alexragwen said:
...unbrickable mod...
Click to expand...
Click to collapse
Those of us with an interest in kernel development would still kill for schematics or board traces. Neither have ever surfaced, that I know of. I believe that the previous poster was referring to the various SoC documentation that has been out there, but that won't tell you where to put the resistor.
The SGS4G is pretty unbrickable as it sits, as long as you don't muck with the bootloaders.
If you still want the unbrickable mod, I'd search through these SGS4G forums as I think @bhundven may have looked into it or done it. Search is your best bet as I think he's taking a break from phone-dev work.
Kit Kat is out... Gimmie a break!
jeffsf said:
If you still want the unbrickable mod, I'd search through these SGS4G forums as I think @bhundven may have looked into it or done it.
Click to expand...
Click to collapse
Actually, @AdamOutler did the modification for me, but I risked the sacrifice to make it possible for our device (SGH-T959V/W).
See: This and this.
jeffsf said:
Search is your best bet as I think he's taking a break from phone-dev work.
Click to expand...
Click to collapse
Yes, I'm currently taking a break from phone hacking. I'm working on my own mental health and focus on my work.
Well, i dont think youll need an schematic to apply unbrickable mod. To be honestm pictures attached by Adam look way too clear for us to miss it. Thruth is i have been looking for a couple mobos schematics and been able to find some. For example last week i needed the N7000 Galaxy Note schematic to find the sim card pinout for a customer who broke the soldering on the mobo of a N7000 Galaxy. Lucky enough i found it. So, search will always be our best tool.
I've always had an HTC phone everything from the EVO shift (yee yeah), to the Inspire HD, then got a Vivid, now I'm using this One X AT&T. I've been spoiled by Sense, I can't imagine having to use a Samsung. It's nice, fast yada yada but geeez its bubbly icons kill it for me.
This OneX I can't understand why the All the softkeys or home keys have been changed. The back key is for left hand people, Why does the recent apps button even exist and then put it in the most convenient place? No battery? What I mean to say is no extra battery. Ive always bought an extra battery so that if I don't have a plug-in or charger I got it covered.
Can someone give me any reason why the charge port is on the side?
No SD storage... This is probably the main reason Im done with HTC. A factory reset from the bootloader erases everything on your phone including backups. EVERYTHING ON YOUR PHONE! Not the recovery though...
Is there any way of securing the data so this never happens?
Now my camera has went out. No camera.. Ive tried everything, I even called HTC support they tried and they say "need new hardware". I really hate to tear into this phone.
I never write these vent posts.. I would fight someone lastweek if they talked trash about HTC phones. Maybe I got lemon, it's just One thing after another.
Although it seems like I'm trashing this phone I really love it. I just can't store anything important on it or take pictures, video.. I've read so many posts on replacing the camera but I just hate to tear into it. Any suggestions would be appreciated. I never knew how important it was..
No one can say anything bad about the screen on the One X. It's amazing..
Sound is great
Smooth running phone too..
I'm scared to spend money on another HTC product. Maybe there is a way to try out a phone for a couple days that would be great.
THOUGHTS?????
Sent using-
Sense5 HTC OneXL
unlocked, rooted, S-off
TurboCharged
Tampered like a mother f....er
You have the right to voice your opinion but this isn't really the place to do it. You're just knocking the phone. It's not a perfect phone, but it's really good once you get it rooted and all that. Stay respectful, everyone!
Sent from my evita
I'm wondering why you bought it on the first place.
Almost all of your complaints are hardware ones that you know about before buying the phone?
Personally I don't mind the hardware at all. External SD would be nice but not a big deal. And I like right side unlock buttons.
As far as the camera I think it was just bad luck or damage. Haven't heard about it happening much at all.
Sent from my HTC One X using xda premium
My niggles:
They put pogo contacts on the phone... but couldn't be bothered to make anything that actually uses them.
9.xGB of storage when I was expecting the typical 14.xGB for a phone advertised with 16GB.
HUGE pain to get root early on, though partially att's fault.
The phone loses signal if I leave it face up. (really gotta find time to get that fixed...)
Other than that, it's been an awesome phone.
I think HTC could've improved more in the music department and camera, but I agree with RollTribe. It's not a perfect phone, and there will never be a perfect phone imo. For me it was the software and hardware (GPS works!!) that made me stay.
Overall I would consider the XL solid. I'm going to look past the HTC One, though, and wait for the next generation.
Sent from my HTC One X using xda premium
I think the back button is in a perfect spot for right handed people, it is right in reach of my thumb when held in my right hand.
You complain about the recent app button, but I don't follow your complaint. It exists so you can multitask, you say it is in a convenient spot and I agree, easily accessed by the right thumb when held right handed.
Extra battery? I have never found myself wanting to buy extra batteries for any phone ever. I just charge mine when required. This phone lasts a full day easy if you are not playing games on it. I am a heavy phone user with maybe 30-50 calls every work day, sync an ics calendar every hour, use calendar, contacts, browser and email a whole bunch. The phone lasts the entire day. These days with my car dock I can play games all day without issue
Charge port on the side makes for easy landscape car docking, perfect for GPS. I slip mine into the car charger often these days, it is one of the easiest phones to get in and out of the dock as the charge port is on the side.
SD storage, again I use my phone for a whole bunch of things and have never gone close to using the full storage. I stream over Spotify via Bluetooth to my car head unit. I have about 20-30 user apps installed. I just can not fill the phone. I even have the 16GB model from Hong Kong while most around me who bought from Telstra have 32GB.
I have had my phone for 15 months now and the camera still works perfectly. My last phone(s) was a Nexus One and a Nokia E68(or something) I smashed the camera lens on the Nokia before 12 months, not sure how, but my One XL is fine.
Then the next user, Zodiac:
I like the unlock at the top, easy to reach with right index finger, but can not be accidentally pushed.
Then, antichamp:
pogo pin issues( I initially really wanted to use the pogo pins aswell just for the gimmick until I realized they only seem cool)
1)The pogo pins are used on the desk dock.
2)The USB port actually "locks" the phone in to the car dock, the car dock requires a locking mechanism unlike the desk dock.
3)The pogo pins would cause scratch marks along the back as the pins drag along the case as you slide the phone in and out of a car dock.
4)The pins on the dock would wear out because of #3
5)What is wrong with the USB port?
The phone is easy to get root on. All issues are AT&T, the phone in EVERY other region is a breeze to unlock.
My gripe is weird data issues, where you sometimes need to give the phone a kick (eg via airplane mode toggling) to reset data (3g, 4g or wifi).
This was been improved dramatically though the updates but is still a niggling issue that sometimes crops up.
Also originally I disliked not having a hardware menu key and being forced into the Android 3 dot menu thing. Ofcourse HTC listened and fixed that issue in an update.
When you say sound is great are we talking about the same phone? Can barely hear my phone speakers from the back seat of my car.
That and spotty service/data issues are my only gripes on this phone.
Sent from my HTC One XL using xda app-developers app
cannonofcourse said:
Now my camera has went out. No camera.. Ive tried everything, I even called HTC support they tried and they say "need new hardware". I really hate to tear into this phone.
Click to expand...
Click to collapse
I think I might be having the same issue as you. Does the camera app just freeze immediately and crash? Then says cannot connect to camera when you try to open it again. Happened to me on AOKP Milestone 2 (rohan said it was an issue in the mainline AOKP), but now I've run 3.18 RUU and flashed the latest CM10.1 nightly and had the same issue.
Sent from my S-Off, turbo injected AT&T HTC One X (evita), running AOKP 4.2.2 & using XDA Premium
cannonofcourse said:
A factory reset from the bootloader erases everything on your phone including backups. EVERYTHING ON YOUR PHONE! Not the recovery though...
Is there any way of securing the data so this never happens?
Click to expand...
Click to collapse
This only occurs after you have modded the phone, so you can't blame HTC for this. Factory reset from bootloader works fine on stock phones.
The way to secure your data is very simple: Don't factory reset from bootloader. Its been mentioned in countless places. So if you wiped your backups, its your own fault for lack of proper research.
Research? Lets just try and read before quoting...
redpoint73 said:
This only occurs after you have modded the phone, so you can't blame HTC for this. Factory reset from bootloader works fine on stock phones.
The way to secure your data is very simple: Don't factory reset from bootloader. Its been mentioned in countless places. So if you wiped your backups, its your own fault for lack of proper research.
Click to expand...
Click to collapse
I would expect this kind of blasphemy if I posted a dumb video on YouTube, but the fact that this is a dev site full of "professionals". I posted a comment against my better judgement to try and find answers or suggestions about my phone. The first response is that
"This isnt the place for that" And then 2nd response is
"Why did you buy the one x, you should have known about these things"
First of all I dont think its constructive to rip someone down for a post when clearly alot of people are having the same problem. And I wish I would have found an honest review of this phone before I bought it. I wish I could have read my post before buying this phone. But for some reason Im a black sheep (to a few) for giving my opinion on very important flaws that anyone should be concerned with. I love HTC and have 6 devices prior to this one.
Im not sure who (the 5th reply) twist....? works for and to make statements like never having a storage issue and dont mind the internal card.? I never said anything about the storage. I am commenting on the fact you cant remove the sd card just to make sure the data is secure. And I would love to have a number of how many people use a car dock or computer dock.?? Maybe this guy works for a manufacturer/...///??
I always carry an extra battery and Im not the only person who does. To act like that is unreasonable is just ridiculous.
Of course not all phones are perfect Of course! Why would anyone feel the need to say that...
I love my ONE X It just annoys me that I cant take pictures of my little girl with it. Or store any important data on it. Ive had at least 5 people contact me about the camera issue and are having the same problem.
This last reply to my review and concerns and wanted suggestions takes the cake.
The last comment clearly says that if "you want to secure your data then dont do a factory reset from the boot-loader. It only happens on Modded phones". I have 6 HTC phones and none of them wipe the complete phone to include the external sd. NONE... I wanted to know if it was possible to lock the sd storage or "trick" it to thinking it had an external sd and dont wipe that. If you dont know the answer then fine. I dont see how that is irrational. And I dont think anyone comes to this site because they want to get information on "never modding or rooting there phone." This site is kinda geared towards people who enjoy learning and doing cool, great and ingenious things to make everyone's life better. Or awesome. But to get completely ripped by senior members and the comments being about something other than what I or other members even said is UN professional. This site encourages members to post on General Forumns. I think its 10 before I can move to the big boy pages. But at this rate what could I possible have to gain by it. If I make mistakes or brick my phone then why should I feel like an idiot for wanting people to know why and how it happened to save them a headache? I dont see how typing anymore will stress how childish most of the replies to my posts have been, cannonofcourse out...
You need to calm down. Redpoint was right.
Sent from my Evita
Bottom line, you want perfect stability, Don't root.
cannonofcourse said:
The back key is for left hand people,
Click to expand...
Click to collapse
I'm right handed and it really doesn't bother me. I can sympathize with having to get used to differences on devices. It always takes a while for me to get used to things.
cannonofcourse said:
No battery? What I mean to say is no extra battery. Ive always bought an extra battery so that if I don't have a plug-in or charger I got it covered.
Click to expand...
Click to collapse
I find that external battery packs are way more convenient. You can pick up a 10,000 mah Anker pack for under $50 and it'll charge your phone several times. And it works for any other devices that you might have that charge via USB. And it will work on the next phone that you buy.
cannonofcourse said:
Can someone give me any reason why the charge port is on the side?
Click to expand...
Click to collapse
No idea. It does however work very well with the iBolt car dock. Quick and easy to put the phone in and lock it.
cannonofcourse said:
No SD storage... This is probably the main reason Im done with HTC. A factory reset from the bootloader erases everything on your phone including backups. EVERYTHING ON YOUR PHONE! Not the recovery though...
Is there any way of securing the data so this never happens?
Click to expand...
Click to collapse
I found this out the hard way as well, but anything on my phone exists other places. I don't consider my phone to be a place to store unrecoverable files. My photos are automatically backed up to G+, contacts and email are on Google, anything else doesn't really matter.
cannonofcourse said:
Now my camera has went out. No camera.. Ive tried everything, I even called HTC support they tried and they say "need new hardware". I really hate to tear into this phone.
Click to expand...
Click to collapse
That just sucks. I had to get a warranty replacement at one point due to a bad SIM slot, but the AT&T service center swapped it out no questions asked, didn't even notice that the bootloader was unlocked.
With all of that said, I really do think that people here are trying to help.
cannonofcourse said:
I would expect this kind of blasphemy if I posted a dumb video on YouTube, but the fact that this is a dev site full of "professionals".
Click to expand...
Click to collapse
So if anybody disagrees with you, its "blasphemy"??? Nobody here is a professional. Professionals get paid. If you mean courteous and polite, I don't see any responses to the contrary. Yes, several of us have disagreed with you. But not in any way that can remotely be considered a flame, personal attack, etc.
I was simply pointing out a FACT that the factory reset from bootloader bug exists due to the phone being hacked. HTC could have not have predicted every way user-implemented mods could harm the phone. You have some legitimate criticisms of HTC and the phone. But the factory reset issue isn't one of them.
You asked for our thoughts. We gave them. Or maybe you just wanted to hear from people that agreed with you?
I'm done with HTC as well if motorola steps up its game with the X but frankly i'll support anyone except samsung. I just want to see android evolve to more than just 1 oem (samsung).
I don't hold the past against any oem. If i like the new phone, i'll buy it.
twistedddx said:
Then, antichamp:
pogo pin issues( I initially really wanted to use the pogo pins aswell just for the gimmick until I realized they only seem cool)
1)The pogo pins are used on the desk dock.
2)The USB port actually "locks" the phone in to the car dock, the car dock requires a locking mechanism unlike the desk dock.
3)The pogo pins would cause scratch marks along the back as the pins drag along the case as you slide the phone in and out of a car dock.
4)The pins on the dock would wear out because of #3
5)What is wrong with the USB port?
Click to expand...
Click to collapse
There is no desk dock for this phone...
For the international version there is, regardless of it's mediocre reviews.
I recently discovered the unfortunate truth of your 2nd point (I'm trying to make my own car dock).
On three and four, wouldn't that indicate a poor design of the phone? (blame the user ala apple's "you're holding it wrong")
There's nothing wrong with the usb port, I just think it would be convienient to both charge the phone and get analog audio out without connecting both the usb and 3.5mm jack.
fleabeard said:
I had to get a warranty replacement at one point due to a bad SIM slot, but the AT&T service center swapped it out no questions asked, didn't even notice that the bootloader was unlocked.
Click to expand...
Click to collapse
Hmmm, bad sim slot you say?
If I don't leave my phone face down it loses service. I have to restart it upside down and shake it before it will come back.
Think I could have the same problem?
It's possible. Or it could just be the SIM carrier.
Sent from my One X using Tapatalk 4 Beta
Well....
fleabeard said:
I'm right handed and it really doesn't bother me. I can sympathize with having to get used to differences on devices. It always takes a while for me to get used to things.
I find that external battery packs are way more convenient. You can pick up a 10,000 mah Anker pack for under $50 and it'll charge your phone several times. And it works for any other devices that you might have that charge via USB. And it will work on the next phone that you buy.
Actually I bought one of the "power on the go" packs from radio shack and broke it apart, replaced the battery with a 3600mah I ordered for my evo on accident. It cost about 8 dollars (plus the cost of the extra battery 12 bucks I think) and it charges my phone incredibly fast and about 3 times before I have to charge it back.up. Nothing worse than hearing that beep noise when your trying to get something done.
No idea. It does however work very well with the iBolt car dock. Quick and easy to put the phone in and lock it.
I found this out the hard way as well, but anything on my phone exists other places. I don't consider my phone to be a place to store unrecoverable files. My photos are automatically backed up to G+, contacts and email are on Google, anything else doesn't really matter.
I do try to back up everything to the cloud, via Google drive or I have a media server but it always seems like the one thing I needed is gone forever. I just found out the hard way that a reset from the bootloader took out my whole phone. It just sucks not being able to pull the card out and hold it.
That just sucks. I had to get a warranty replacement at one point due to a bad SIM slot, but the AT&T service center swapped it out no questions asked, didn't even notice that the bootloader was unlocked.
It seems like a certain set of serial numbers are having a hardware issue. I hate to go without my phone to get it fixed but I guess thats what I have to do. Thats the price we pay to have it all wrapped up in one little cool device.
With all of that said, I really do think that people here are trying to help.
Click to expand...
Click to collapse
I know there are plenty of people that do a fantastic superhuman job. Just hours of searching to find out if someone has or is working on a fix or if I can provide info to contribute seems like so many people just lashing out for no reason.. But maybe Im being defensive.
Thanks
Unfortunately I highly doubt the issues you've brought up can be "fixed".
But...
I'm pretty sure you can change the location of the back button on certain aosp ROMs though.
Using battery case should mitigate the need for a removable battery.
The fact that doing a factory reset from bootloader wipes your phone can't be changed, but a little research on here warns of that in numerous places. And I don't think that's necessarily HTC's fault. It's up to us to educate ourselves about the risks we face when altering our devices.
For instance: TWRP 2.6 has an advanced wipe feature which makes it very easy to wipe your sd card while wiping the usual system and caches. I did that myself just recently, accidentally checked the wrong box and wiped my sd. I lost everything. Without a backup. So many photos of my kids gone for good. But I don't blame TWRP for making it easy to do that. I blame myself for working too fast and not being careful enough.
Sent from my Evita
cannonofcourse said:
I know there are plenty of people that do a fantastic superhuman job. Just hours of searching to find out if someone has or is working on a fix or if I can provide info to contribute seems like so many people just lashing out for no reason.. But maybe Im being defensive.
Thanks
Click to expand...
Click to collapse
Did the factory reset thrrough bootloader cause your problems??
If so, all yous gotta do is plug yer phone right into your computer and let windows detect it. Once it finds it, it will send you a window that says something along the lines of having an error with the sd card, from there click the button that says fix errors, and your all set. This happened to me before and I couldnt play music, store or access anything, or use the camera. But now it works perfectly.
And as for the extra battery, the portable chargers provide more battery life with less money. It makes more sense to buy a portable charger even if we did have removable batteries. :good::good::good::good:
Well I have been a owner of a LG Nexus 5 for the past (almost) 2 years now, in fact I am coming to the end of my contract very soon and will be able to either goto another company or get a new phone.
Anyways, sometime ago I experienced a problem with my microphone and external speakers not working, or at at least some of the time... After a bit of research online I found out my problem was related to a connection inside the phone that connected the bottom assembly to the main board at the top of the phone. It required me to remove the back panel and a few screws to remove the plastic cover, but the poster suggested putting some tape on top of that connection to hold it down more firmly to the socket it connected too. So I did this. I put some black tap (electrical tape cut to fit.) on top and then assembled the phone again. Viola, It worked!
Well, a short time after I decided that I wanted to update my phone from stock kitkat (4.4.4). Always been curious about custom ROMs and gave Cyanogenmod a try. Not only that I got bold and tried the nightly releases of the new marshmellow update. After some time I started experiencing things not working, like the camera, and a lot of freezing, hang ups and random reboots (not so much the reboots as the constant freezing). Often I couldn't get anything on the screen or the phone to respond from a locked state and when I did, often the phone would lag so much, that doing anything would take a long time and proved to be impossible.
I started thinking it was the nightly releases as the source of my problem and just kind of shrugged it off and figured "they will eventually fix the problem". I kept this thinking for quite some time. But it occurred too me one day that something else was causing the issue I was facing for the simple fact that the lag started showing up in the recovery mode (also custom) and a lot of times would continue to show up after I rebooted my phone. Hence, would rule out any 'software' issues I was facing.
I began to think that my problem was hardware. Maybe it was just time for a new phone. But still months away from the end of my contract, this meant I would have to pay off the 'problematic' phone first before getting a new one. I really didn't like that idea. So while looking into this problem, in a last ditch effort, I opened my phone again. Dunno why but I also decided to get rid of the tap on the connection I tried to fix before... I popped off the connection there and had a look at it. It didn't seem damaged in any way nor did the socket. Strange as it was I put that connect back in the socket and put the cover plate back on making sure not to torque the screws and assembled everything back up....
Now the mic and ext speakers work just fine and the phone is working like I just opened the box and took it out for the first time. And I have not once seen any problems... I understand what's happening here... still just wanted to share that for it was definitely weird or what?
https://drive.google.com/open?id=0B0pUNVcVRCJ7MThMc0NHLUNkSEU
Sorry about the link, only way I can upload an image.
Just so there is no confusion... an image of the effected area, inside the phone. The arrow points to the connector and more importantly the area of the connector that seems damaged. If I press lightly where the arrow is pointing on this image, the assemable at the bottom (speaker/mic) will work, indicating a loose connection. Although after visual inspection, I cannot see any damage to connector or the socket. I suppose the only way to really "fix" the issue is to order a new part. As stated previously, already tried tape on the socket to help hold it down, but that seem to cause just as many issues with the phone performance. Any other suggestions?
When ordering a replacement part, you need to be careful because there was another XDA member replaced the same part with a cheap 3rd party solution and the phone would not charge until he replaced it with an oem part.
http://forum.xda-developers.com/google-nexus-5/help/to-buy-usb-charging-port-flex-cable-t3314357
Does anyone else have issues with there ext. speaker and mic not working?
An update on the phone;
back to square one. My ext speaker and mic will not work. And that socket has something to do with the LCD connection on the screen as it will black out if just the right area on the back of the phone is pressed. Only way to revive the phone is to long-press the power button for a reboot. Then will come up fine but speaker and mic still do not work.
audit13 said:
When ordering a replacement part, you need to be careful because there was another XDA member replaced the same part with a cheap 3rd party solution and the phone would not charge until he replaced it with an oem part.
http://forum.xda-developers.com/google-nexus-5/help/to-buy-usb-charging-port-flex-cable-t3314357
Click to expand...
Click to collapse
Wow, that sounds pretty low level tactics of LG... just shameful really, but not hard to believe these days...
Quite honestly, I am just going to replace the phone. Think I got a pretty good run out of it and think its pretty well time for an upgrade. Anyway, for the reason I got the phone, it wont matter the speaker and mic don't work. Just going to use it for development and it will be a good test device.
Oh an this post is related to this thread so I thought I would link it for it may help someone else facing similar problems....
https://forum.cyanogenmod.org/topic/125227-nightly-cm13-releases-make-my-nexus-5-very-slow/
I'm not sure that LG had anything to do with the low-quality replacement parts.
If I were you, look for a n5 with a smashed screen that is suitable for parts.
audit13 said:
I'm not sure that LG had anything to do with the low-quality replacement parts.
If I were you, look for a n5 with a smashed screen that is suitable for parts.
Click to expand...
Click to collapse
Good idea, except the iphone is the most popular phone around here ... find it pretty hard to find one, been looking. But thanks.
I have seen quite a few busted n5 phones in Toronto. I have managed to get working phones with a smashed screen for as little as $30 which is rare for Toronto. Average I pay is $40 to $50. For this price, I either use the phone for parts in several phones or I get third part screen from Aliexpress for around $40 CAD.
I just want to update this as well...
I am fairly certain (now thinking about causes) its not really a design flaw, but more so because I frequently sat on my phone when it was in my back pocket...
audit13 said:
When ordering a replacement part, you need to be careful because there was another XDA member replaced the same part with a cheap 3rd party solution and the phone would not charge until he replaced it with an oem part.
http://forum.xda-developers.com/google-nexus-5/help/to-buy-usb-charging-port-flex-cable-t3314357
Click to expand...
Click to collapse
It was not me but I had that same experience. Replaced with a cheap oem and it didn't charge after that.
I found out why. The charger usb socket was not connected to anything ! Unbelievable! It lacked the black plastic backing for that part of the cable to connect to.