Had my folio keyboard since Feb and notice over the last couple of weeks that the space bar and bottom left keys are really slow to bounce back after being tapped.
Any body else had similar?
will be contacting support tommorow to replace
Related
I've noticed that the slider functionality of my phone, possibly due to user-abuse, is starting to slide off the rails*. I've also noticed that the top is beginning to extend over the bottom... on the side with the PTT button. Is this my fault, or is everyone else having the same problem.
*To define: hold the phone in your hand, and place your thumb on the bottom-left corner of the top "slider-part", (could someone give me the word that should be used in place of "slider-part") push toward the right... Does the bottom, of the top, of your phone slide out by itself? Mine only moves about an 1/8th of an inch, but I'm curious if everyone shares this problem as well.
My phone slides out about the same 1/8 as yours, but i think it was like that even when it was brand new.
Yes it does happen to me, nothing perfect...it's just the sliding mechanism moving on one side and not the other..
I have the same movement on mine. My fuze is 7 weeks old, I use the sliding mechanism, on average, 3 times a day.
When I received my phone I double checked the sliding mechanism - the same movement was present when new. Based on other posts, this appears to be normal.
Other than that, my fuze is doing well. I purchased the ATT store cover (rubberized cover in two pieces) which is really good (although expensive ). I do find that the rubberized cover makes it difficult to put into my trouser pocket, thus I tend to carry it everywhere I go...
I've had that issue since I got it in Nov last year. Other than that, it's working and looking perfectly well. I should also note that I have an invisible shield that's working wonders for the phone. With it installed, I get a better grip on the phone (doesn't feel like I'm going to drop it), obviously no scratches, and fingerprint issues are far less severe.
My first phone slid off the rails too so I called AT&T and they sent me a reconditioned one. Now the slider on the new one actually pulls away from the main body. So I called AT&T again and they are sending me a another phone. Fingers crossed......
The play in the rails seems normal... I do about 4,500 texts a month... so slide open, slide closed over and over again... still holding strong had the Touch Pro since November of 08
My first kaiser (tilt) had that overhang when closed. It bothered me a lot. AT&T wouldn't exchange it, so I superglued a thin, tiny square of vinyl to the bumper at the end of the track to act like a shim, leaving the top and bottom flush when closed. The next two warranty exchanges I got (for other issues) had no such issue, and thankfully, neither does my fuze.
im uber careful with my phone but its so fragile its just breaking apart. the hard keys are coming up, the slider is now over like everyone else, there are small scratches everywhere, and kinda weird is the camera glass is broken around the edges.
My phone is holding up well with the rubberized cover
Holding up well to date, but seldom use the keyboard as have grown accustomed to using FITALY on the Fuze.
Also am using Capdase BiFold case for general protection + top shell of Innocase to help ward off the laminate separation that some users have complained of. (Also helps keep things from resting on the screen.)
May be Overkill, but hope to have this unit for some time....
Hi,
I've had my Nexus S for less than 4 weeks, and I just noticed today that the top right corner of the screen seems to have some give when you press on it. It apparently just started happening now... Anyone else have this issue with their phone? I'm wondering if I should just run to Best Buy and have them exchange the phone for me before it's too late...
Thanks,
Mike
I don't have that problem with mine but in your case looks like you might have to take that trip to best buy
Sent from my Nexus S
if you look at it, does the surface of the top corner part raised a bit compared to the other corners or sides?
I ask because I tried to press gently on the corners and also the sides and there's a very slight give. It maybe because of the type of screen (plastic?) causing the give when pressed?
yeah it appears to be ever so slighlty raised, and has a very slight give...
any word on if this is normal? I have the same issue with the bottom capacitive side....it is noticeably lose sometimes, I can push it then it becomes tight...then the capacitive buttons wont work unless I turn off the screen then turn it back on.
My 2 week old Nexus S just started doing this. It feels like the screen is attached with glue and the screen has separated from the frame. I can press on it and it sticks for a moment, but if press a minute later it clicks again.
My phone had the same problem.. Upper right screen was lifting ever so slightly. I was passed my thirty days so i couldn't bring it back to bestbuy. My only option was to send it to samsung for repair. The problem was that they had it for almost three weeks and when i got it back the screen was still lifting up. I had to send it back out and almost three weeks later (again) i got it back and it was fixed. They ended up replacing the PBA. Not exactly sure what that is but the phone is fixed.
Hi, so upset. Have owned my TF300T now for 3 weeks, in this time I purchased a leather case to protect it.
Whilst holding it in portrait view, with my left thumb between the front camera lense and the other lense, my fingers holding it on the back. The screen cracked from where my thumb was (when i turned it over to the back, realising my thumb was pressing against the back camera lense)
Now a 1/3 of the right screen doesn't work with touch. It seems to work fine whilst I have the keyboard connected.
Just wanted to inform you to be careful where you put your thumb.
I have contacted ASUS support via email and they tell me it maybe a hardware problem?? Going to ring them tomorrow , hoping they will fix it under warranty
The glass seems cracked under the exterior glass
Miss Aly
I have had mine for about two weeks and I hold it one-handed in the same spot, usually... I even sat on it once. Seems sturdy enough to me, so maybe its a defective device?
I feel sorry for you though, best of luck.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
I bought my tf700t with tf201 dock second hand some 2 months ago. Everything worked perfectly up until 2 weeks ago. The previous owner had the thing rooted (build-number: TF700 CROMi-Xenogenesis 5.2.2-10.6.1.27.5 WW DEODEX). There are lots of people on the internet with the same kind of problems on unrooted tf700's so I don't expect it to be a problem with rooting.
What happens?
- The connection between dock and tablet seems to get lost, found again, get lost again etc. within minutes.
- I have a SD-card fitted in the dock and on the bottom of the screen I get messages that tell me he has found a SD-card. Then apparently it loses it again because a few minutes later the same message pops up again and again etc.
- In the beginning (and according to other people on the web still continuing) the tablet would only recognize the dock when charging. Without being plugged in it wouldn't be recognized at all. I opened up the dock and sprayed some contactspray where the cables come out of the hinge and want to connect to the small cable plugs on the dock, That seems to at least have worked to a certain extent, tablet and dock see each other. It says the keyboard should be used but then most keys won't work nor will the trackpad. Only the top row of keys keep functioning (except only the key in the top left corner (that flips a page backwards). But then again, sometimes you can use the keyboard on the dock for a while and then it's stops again (except for the top row of keys. They always work.)
- If I charge my dock to the max and then connect it with the screen most of the time it tells you that the battery of the dock is drained. Sometimes wiggling te tablet in it's slot brings back the battery to life.
Does anybody have a (possible) solution for these problems? I would be so grateful and so would a bunch of pitiful people roaming the back alleys of the internet in the hope of salvation.
One more thing. Several complainers have swiched dock and tablets and the problem seems to be with tablet. If the tablet is ok, then you fit any keyboard. If the tablet is dodgy it won't connect properly with any dock. At least that's what I hear.
Is there anybody with the brilliant solution or a hint at least? I started writing my bestseller on this thing, but like this it's going back to the study again in stead of to a nice terrace in the sun with drinks available.
Thanks in advance for all your trouble.
It looks like the problem is solved. I took the hinge apart, tightened all screws and bolts and put it back together. That seemed to do it .
Just so people don't have to look any further, here's how you take the hinge apart:
- Take out the 2 bolts on the outside of the hinge.
- On the inside of the hinge, on 'the bottom' are 3 pieces of plastic strip or adhesive tape (one approx. 12 cm long on the left side, one approx. 4 cm on the right side and on very small piece in between of 0.5 cm). Using tweezers and/or a scalpel-like knife, carefully peel away the longest strip of plastic working from the outside inwards. You will find three screws within the first 5 cm or so. Take them out. Stop peeling, leave the plastic strip around the data connector attached and start on the other end of this plastic strip, working from right to left. You'll find a screw immediately. Take it out, leave the rest of the strip attached. The 5th screw you'll find underneath the outer end of the 4 cm strip on the right side of the hinge.
- Now you can split the hinge in 2 parts. If necessary, use a small screwdriver at the outer ends to carefully wedge the hinge apart.
- In the part that's still connected to the dock you'll find 4 screws. The outer 2 have a tendency to become loose. Tightening them 'repaired' my dock.
I've bought a 3 used Photon Q over the past month. The keyboard on one phone slides very freely. But the other 2 phones the keyboard is hard to slide out. You can feel the top half of the phone scraping against something (sounds like the keys) when the keyboard slides out. You can see wear marks on either side of the keyboard from repeated slides, probably from the scraping.
Is this normal wear and tear over time or a defect caused by misuse? Is there any way to fix this?