i recently rooted my micromax a87 and installed CWM 5.0.28 (something like this)....but wen i tried to flash new rom from "install zip from sdcard"...it starts the process but shows error "can't open rom.zip" (rom.zip is d rom i used for flashing...)
i tried many roms but same error...i have followed all the instructions ...dalvik cache...format sysytem..format data...
now i cant boot my phone....please help save my phone
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Hovatek said:
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Click to expand...
Click to collapse
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
varungr said:
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
Click to expand...
Click to collapse
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Hovatek said:
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Click to expand...
Click to collapse
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
varungr said:
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
Click to expand...
Click to collapse
So did you find any solution bro... Facing the same problem.. Tired of Googling.. Used Every method like adb,fastboot but cannot get further...
Stucked in CWm bootloop Micromax mad a94
Can any one help me to fix this crap cwm bootloop on my mad a94.Whenever I turn on my phone it goes into the cwm screen .I hd tried to wipe data, dalvic cache.mount sd, system etc but it doesnt work plZ help me!!
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
Do the following
Go to the recovery mode
Select advance and wipe dalvik cache
Return to main menu and wipe data factory reset
And wipe cache partition
That's it. Reboot phone
Hit thanks
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
dude samething happened to me if its because of chainfire then do the following take ur battery out and at the time u insert go to recovery mode micromax recover - power+volume down then from there go to choose a install new zip that is it can be restored only if u have a backup or else try finding a image in google and this must work and if u dont have backup and only idea i can share is clear cache go to advanced clear dalvik cache and reboot ua phone and again take off battery while booting and restart :good:
all the best
Chainfire 3D only support Gingerbread or lower. Not for ics+, try to wipe cache and dalvik,if problem still exists, reflash ur rom
Hello this is my first thread or ....whatever
Here is my problem firstly i root my micromax a50 and it was successfully done.then i tried installing cwm recovery via uncle mobile tool and then problem occur then it is just booing up and the boot animation continously happen nothing happens so i decided to install stock rom that i download from xda (pretty trustworthy) and sp flash tool part ...
Then i load up scatter file and installed proper drivers but firstly when i insert phone without battery nothung happens just 0 % and then i pressed volume down key and connection sounds "dong" and red bar fills 100 % but after waiting 3:26 seconds. No response and also it shows a error earlier That BROM ERROR etc.
Help please.
Thanks in advance i think its a bootloop cant get in recovery also .
Requirements:
1)MTK Driver_Auto_Installer_v5.1453.03
MOD EDIT: REMOVED
2)SP_Flash_Tool_exe_Windows_v5.1452.00.000
MOD EDIT: REMOVED
3)Micromax-Q380 stock rom lollipop
MOD EDIT: REMOVED
Note: turn off your phone (if there is already a bootloop, try reboot to stock recovery by pressing both volume up and power button, then press power down option to turn off your phone)
1)First extract and install Driver Auto Installer v5.145 in windows
2)now extract and run as administrator sp flash tool or flash tool.exe
3)click scatter file loading and select MT6582_Android_scatter.txt (note: the scatter file can be found by extracting 'Micromax-Q380 stock rom lollipop.rar' in a separate folder)
4)choose options click usb radio button, select high speed, select DA download all with checksum
5)from dropdown list select download only option in main window
6)make sure you already turn off your phone
7)click download button and immediately connect usb cable
8)first pink,red color apperars,then yellow progress bar and then green circle to finish the flash download
you are now safe to disconnect and turn on your phone
9)first boots take a longer time
10)after completing go to settings and do a factory data reset which makes phones faster or it becomes normal
network is not showing
Sir i m taking ur stock rom q380 spark canvas ..after taking.. Mobile network is not showing even sim card detecting...pls help me..as soon as possible
.pls
Pradeep gautam said:
Sir i m taking ur stock rom q380 spark canvas ..after taking.. Mobile network is not showing even sim card detecting...pls help me..as soon as possible
.pls
Click to expand...
Click to collapse
bro do a factory reset bro if you not yet rooted, if you rooted do data wipe through TWRP recovery
im not able to do that becoz of the error 1012 plzzz help..ihave not rooted or installed any custom rom..plzz help..or please post a video or give a solution to this..thanku..
Sim network not detected in rom . how to solve my problem step by step process.
Please provide TWRP recovery for Micromax Canvas Spark....
Sent from my Spice Mi-445 using xda Forums PRO
@[P]
@naveenay, Sorry to bother you.
After flashing v8.0.8, I have lost my IMEI, I restored it via Engg. Mode. But its temp.
Need ur help regarding permanency of my IMEI.
Also, I googled fr that and found a method but Android CDC Driver is unable to install in my Comp. (WIN7).
Need your help regarding this issue (IMEI) ASAP. Also, if possible, please provide DB and Modem files from Stock Firmware.
Thank You!
Hi Naveen vai
Mere canvas spark ka accidently all system apps delete ho chuka h
3 ya 4 shopping ka apps bcha hua h .....o v open nhi ho rha h....
Plz btao vai kya kru
Sent from my GT-S5360 using XDA Free mobile app
your imei number is invalid bro
check the imei no. *#06#.
when the invalid no
then download kingroot and root your divice then download chamelephone apps and type your emei number then restart your cellphone
Dude can u make cynogen custom rom for micromax canvas spark because i want it very much ya koi aur
Please help me !
My micromax canvas spark q380
Is got brick while flashing recovery.img
Specially help me regarding drivers and of q380
Easy and working steps of flashing stock rom of q380
Sent from my GT-S7582 using XDA Free mobile app
issues while flashing stock rom
hi bro.
i tried to install stock rom on my softbricked micromax canvas spark.but its not working.i think those drivers are not working on my device with windows 8.1.coz i think you posted drivers fors windows7,xp and 8.when i tried to install those drivers some errors occured and while trying to flash there is no responce and it is not showing any speed detais..plz help me resolve the issue and post drivers for win8.1.
thanks in advance
After clicking on download. no colour progress bar is coming. it is stuck on it..please help...can not tell whether it is even owrking or not.
my phone is struck , after i flashed the rom downloaded form the above link for my mmx canvas spark .
power key does'nt. any suggestions ??
canvas spark has inbuilt battery
it has in buit battery so when connected to pc it get charged and show logo and charging image
then how can appply stock rom in to it
naveenay said:
bro do a factory reset bro if you not yet rooted, if you rooted do data wipe through TWRP recovery
Click to expand...
Click to collapse
Not working Naveen bhai.. after factory reset..
Plzzz ... tell us how to do it... network not showing..
How to install custom ROM without losing imei number?
Thanks for the stock rom of micromax q380...
Easiest way is use sp flash tool latest version only download ur q380 stock os
Bro i want cm12.1 software on micromax canvas spark
Hi,
I was trying to flash back a stock ROM on my canvas a116 using SP Flash tool, and while formatting I chose the Format whole flash option. The format was successful but now I am not able to flash any ROM on the device. When I press the download button, the red and purple bar show 100% and the I get "brom error s_dl_pmt_err_no_space (5069)". I tried to search for a solution on the net but no luck. My phone is completely dead, not even getting battery charging logo or LED, but the phone gets detected when connected to PC without battery.
Where . How??? Can u tell me
Sent from my Micromax A116 using XDA Free mobile app