Database Info

[Q] MCCX a110 Canvas 2 JB 4.1.1 rooting

HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....

tanmay5 said:
HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/show....php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/show....php?t=1960080 check the first post for the Stock V2 ROM

Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update

mayur.3.92 said:
Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update
Click to expand...
Click to collapse
i think you need the cynus t2 driver..

0. Uninstall the micromax canvas 2 drivers.
1. Install mobistel cynus t2 rom using stock recovery.
2. Connect phone to pc, install mobistel drivers.
3. Remove phone from pc and turn it off. Open device manager in computer. Connect switched off phone to pc. You'll see a device in the COM ports section. Quickly right click it as it vanishes after a few seconds. Right click it and select update device driver.
4. Select the folder in which the cynus t2 drivers are installed. Now the drivers will be installed.
5. Replace the recovery.img with cwm recovery in stock v2 folder.
6. Remove your phone now and let it remain switched off. Open sp flash tool in administrator mode(just in case).
7. Load the scatter loading file and click download button.
8. Connect the phone now. And now everything should go fine.

yeah my mt65xx drivers was not installed after installing i used sp flash tools selected scatter file n recovery pressed download
red bar completes and showing enter usb in 15 sec after that i get an error helpp.............

error 8100 cant find usb port
what should i do know

sir when i use sp flash tool to root jb cynus t2 rom, i selected download when i connected my device it shows 100% with red bar and shows enter usb in 15 sec and after that shows an error 8100 usb port cant be located .
help as com ports are installed for MT65xx and is working properly and named is preloade usb vcom(android) Com 4.

yeah my mt65xx drivers was not installed after installing/updating from drive i selected mobile cynus t2 under program files and said encounted a problem and cant update drivers so i downloaded MT65xx drivers from xda site and browsed and drivers got installed named is preloade usb vcom(android) Com 4. i used sp flash tools selected scatter file n recovery pressed download
red bar completes 100% and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know

this is the error i m getting

tanmay5 said:
this is the error i m getting
Click to expand...
Click to collapse
still no luck ?.
did you try drivers from pdanet?..
did u use "run as admininstrator" for running flashtool... then try without that. because for me, bin4ry rooting donot wrk if i use run as admin option!..
in one tutorial i found
"Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode."
http://forum.xda-developers.com/showthread.php?t=1982587
so try keeping the cwm recovery.img in the same place as stock recovery was .. ( this is a wild wild gues) ..

Year I m tried a lot of trying I though buying an android will b a good move
But I think I ll stick to windows.
Thanx a lot bro for ur help n effort keep ur work up
I m going 2 sell canvas 2 I thought dev on xda will help me but no one is boughther about jb root
If any news about its root plz tel me

hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up

mmxa110user said:
hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up
Click to expand...
Click to collapse
I'll surely wait
thanx dude
if something new comes up please notify me
tk care

Flash tool @ 0%
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....

Josephxxx said:
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....
Click to expand...
Click to collapse
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....

tanmay5 said:
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....
Click to expand...
Click to collapse
If u have CWM or twrp Recovery...just download su update from here - http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip copy it to sd card & flash it via CWM or TWRP. maybe it will help u.

[Q] (HELP) How to unbrick hardbrick micromax a110

please someone tell me how to unbrick hardbricked micromax a110

do u try flash stock jb via flashtool?? if u try what ur facing probem??
Sent from my Micromax CANVAS HD using xda app-developers app

When i try to flash jelly bean rom via sp flashtool after that my phone is not booting up and when i retry to flash rom via sp flashtool it is not showjng in sp flashtool
Sent from my Micromax A110 using xda premium

go to service station like noob..... they will check it they found problem with cpu or any hardware they will replce it... or replace PCB
Sent from my Micromax CANVAS HD using xda app-developers app

clean your ExtSD before visit..(important)
i.e. any ROM, Recovery, flash file..
keep only Android defualt folder & your media (MP3, Video)

bro no one check.... sd card .... he give u sd card when u give them mobile... beacasue its mendatory

You can flash stock jb through SP Flash Tool :highfive:

hey my mmx a110 is rooted..
recently i tried to reset my phone by normal settings reset method not cwm reset..
now when i press power on button it shows the reset logo n then again reboots n again reappears the reset logo..
n again reboots...
plz help me fast.....
:crying:

Very easy- flash clockworkmod recovery with sp flash tool again, after flashing recovery go into recovery and do what ever you want
Sent from my Micromax A110 using Tapatalk 4

U should atleast try a little to find the solution of ur problem b4 creating a new thread..'
Well just go this thraed...it would probably solve ur issue':thumbup:
BEST OF LUCK
LINK: http://forum.xda-developers.com/showthread.php?t=2376667

hey i tried to flash recovery using sp flash tool but showed n error...
and now its not booting up..
i long pressed the power button but still not booting....
pls pls help....
:crying:

micromax Unite 2 a106 8 g.b rom

Hello to everyone...
my micromax Unite 2 a106 8 g.b rom is not booting...
1. i rooted my phone using kingroot
2. it was working fine until i installed chainfire3d app
3. now whenever i switch on my phone it just freezes at micromax logo screen
4. whenever i connect my phone to pc using usb it connects and then disconnects and the process repeats continously.
5. by which i am unable to install rom using sp flash tool...
plz help me with this problem...thanks in advance...

what you just need to do is download the stock rom , kitkat or lollipop , install sp toll to your pc , select scatter file from the extracted rom ( file you downloaded before u want to extract it to get the rom and scatter file etc...) , then just click on download and then connect your phone to your pc without battery ...
if that doesn't work try selecting firmware upgrade from the box below download ..
and check the drivers , install vcom universal mtk drivers .
and you're done .
hope this works
Sent from my Micromax A106 using XDA Forums

I am unable to go in recovery mode.

I had tried to use Mobileuncle tool for custom recovery with the help philz img but after doing this now I am unable to go in recovery mode, when I m trying to go it's rebooting again n again, but able to enter in factory mode, plz help(for rooting the phone I am using Kingroot):crying:
(Using lollipop 5.0)
Plz help guys....

Gyandeepg44 said:
I had tried to use Mobileuncle tool for custom recovery with the help philz img but after doing this now I am unable to go in recovery mode, when I m trying to go it's rebooting again n again, but able to enter in factory mode, plz help(for rooting the phone I am using Kingroot):crying:
(Using lollipop 5.0)
Plz help guys....
Click to expand...
Click to collapse
try to flash stock kitkat or lollipop rom sp flash tool
Sent from my Nexus 7

adeelraj said:
try to flash stock kitkat or lollipop rom sp flash tool
Sent from my Nexus 7
Click to expand...
Click to collapse
Actually I am not aware that how to flash so can you plz step by step.

this link has complete step by step guide
a bit lenghthy but works 100%
http://forums.androidcentral.com/go...1477-guide-nexus-7-factory-image-restore.html
Sent from my N901C using Tapatalk 2

guys I have micromax unite2 a106 phone. I also tryd to flash philz in it by mobile uncle tools with the help of a thread on xda.
But now when I reboot into recovery, it only shows logo for sometimes and then blank screen.
I think that philz rec was made fir its kitkat version but now it is lollipop updated.
But my recovery is lost.
How to bring it back.....???????? Without pc it will be better.

Same problem is occurring, guys plz help.....

Rustamveer said:
guys I have micromax unite2 a106 phone. I also tryd to flash philz in it by mobile uncle tools with the help of a thread on xda.
But now when I reboot into recovery, it only shows logo for sometimes and then blank screen.
I think that philz rec was made fir its kitkat version but now it is lollipop updated.
But my recovery is lost.
How to bring it back.....???????? Without pc it will be better.
Click to expand...
Click to collapse
flash stock rom via sp flashtool then install recovery again
Gyandeepg44 said:
Same problem is occurring, guys plz help.....
Click to expand...
Click to collapse
Sent from my N901C using Tapatalk 2

Micromachining A106
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me

can't get into recovery mode in mmx A106

Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me

i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
To best assist you with your issue, I'm going to move this thread to your device's Q&A section.
You should receive expert advice there.
Good luck!

i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Okay so you are unable to boot your device in recovery mode. You can download stock recovery or any custom recovery for your device and then again flash it using flashify. Hope it will work. If its not working let me know by replying. :good:

Flashify is unable to flash stock n custom recovery in my mmx a106. I tried it but i got same issue as amlesh

Whats you need to do is to install sp flash tool on your pc and the stock rom for your mmx unite 2 lollipop .then install sp flash tool and and execute the program ...then there will be a command 'Scatter file' ....click on that and open that in fhe Firmware folder of your Stock Rom ....the connect ur device using usb cable and then click download in the sp flash tool......after completing that disconnect ur devices and reboot it....

Wrong Choice!
Flashify and Twrp are both bad for Unite 2!
You would have flashed the Philz Recovery with SP FLash tool and then flashed the TWRP recovery using it!
Now Still you can do the same
Just google philz recovery and you will get a detailed answer there!
If you like this hit THANKS

i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Your phone appears to have gone into a bootloop.
Here is what you can do as you can't get into the system and reboot into recovery mode. Just confirm if you are doing it the correct way.
To enter Recovery mode - turn phone completely OFF.
Recovery = Vol Down + Power (hold both down for several seconds)
This button press procedure varies with each device/model of phone.
Click to expand...
Click to collapse
If the above steps failed, proceed down below.
Things you will need:
1) USB to PC connecting cable
2) A PC where you can download one of the tools to recover (MTKDroid/SpFlash along with the device specific Scatter file)
3) USB drivers installed on your PC to connect with your phone
4) Patience to read references and follow the steps to flash recovery using Tool
CAUTION: Do steps at your own risk. Do not hesitate to ask if not sure. Post restoring recovery successfully, if you plan to flash a Custom ROM, suggest taking a backup from device using TWRP OR atleast the NVRAM using MTKDroid Tool so that you do not run into issues resulting with SIM showing No Network/Service.
Click to expand...
Click to collapse
References: (Some of the community folks have done the hard work to publish these)
SP FLASH TOOL Tutorial to install TWRP / Custom Recovery
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
Installing custom recovery using SP Flash Tool(COMPLETE TUTORIAL)
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
https://forum.xda-developers.com/showthread.php?t=2730031
[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Ensure to have the latest versions of TWRP and the flash tools MTKDroid AND/OR SPFlash.
To let you know, I've used the recoveries viz. CTR, TWRP, CWM, Philz on MMX a106 and haven't experienced any issues at all. Neither have I had any issues with Flashify as reported by some. Anyways its a personal experience
NOTE: If the issue is already resolved by now, please help others know it with your fix.
Click to expand...
Click to collapse
Hope this helps, happy restoring
Finally, Thank if you feel helped.