Hello to everyone...
my micromax Unite 2 a106 8 g.b rom is not booting...
1. i rooted my phone using kingroot
2. it was working fine until i installed chainfire3d app
3. now whenever i switch on my phone it just freezes at micromax logo screen
4. whenever i connect my phone to pc using usb it connects and then disconnects and the process repeats continously.
5. by which i am unable to install rom using sp flash tool...
plz help me with this problem...thanks in advance...
what you just need to do is download the stock rom , kitkat or lollipop , install sp toll to your pc , select scatter file from the extracted rom ( file you downloaded before u want to extract it to get the rom and scatter file etc...) , then just click on download and then connect your phone to your pc without battery ...
if that doesn't work try selecting firmware upgrade from the box below download ..
and check the drivers , install vcom universal mtk drivers .
and you're done .
hope this works
Sent from my Micromax A106 using XDA Forums
Related
HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....
tanmay5 said:
HELP PLEASE,
sir I m owning a micromax canvas 2 a110 .
recently I rooted my phone ics and flashed CYNUS T2 Rom on my canvas 2 .
when I try to root this rom, nothing happening to me .
tried flash tools as well it just srtuck at 0% no green ring to show progress.
when I choose recovery from path and press f9 to download
I always get an error not all the images are loaded properly you still want to continue I pressed yes nothing happens.
tried cmd as well to flash all commands worked except flashing recovery c:\recovery.img
it shows waiting for device as my device is attached 0123456789abcde
My drivers of mobistel is installed and adb working fine as it can be traced in device manager.
help me to root my jb cynus t2 rom so I can install pre rooted roms thanx....
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/show....php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/show....php?t=1960080 check the first post for the Stock V2 ROM
Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update
mayur.3.92 said:
Even iam facing the same issue sp flash tools cant detect my phone after cynus jb update
Click to expand...
Click to collapse
i think you need the cynus t2 driver..
0. Uninstall the micromax canvas 2 drivers.
1. Install mobistel cynus t2 rom using stock recovery.
2. Connect phone to pc, install mobistel drivers.
3. Remove phone from pc and turn it off. Open device manager in computer. Connect switched off phone to pc. You'll see a device in the COM ports section. Quickly right click it as it vanishes after a few seconds. Right click it and select update device driver.
4. Select the folder in which the cynus t2 drivers are installed. Now the drivers will be installed.
5. Replace the recovery.img with cwm recovery in stock v2 folder.
6. Remove your phone now and let it remain switched off. Open sp flash tool in administrator mode(just in case).
7. Load the scatter loading file and click download button.
8. Connect the phone now. And now everything should go fine.
yeah my mt65xx drivers was not installed after installing i used sp flash tools selected scatter file n recovery pressed download
red bar completes and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know
sir when i use sp flash tool to root jb cynus t2 rom, i selected download when i connected my device it shows 100% with red bar and shows enter usb in 15 sec and after that shows an error 8100 usb port cant be located .
help as com ports are installed for MT65xx and is working properly and named is preloade usb vcom(android) Com 4.
yeah my mt65xx drivers was not installed after installing/updating from drive i selected mobile cynus t2 under program files and said encounted a problem and cant update drivers so i downloaded MT65xx drivers from xda site and browsed and drivers got installed named is preloade usb vcom(android) Com 4. i used sp flash tools selected scatter file n recovery pressed download
red bar completes 100% and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know
this is the error i m getting
tanmay5 said:
this is the error i m getting
Click to expand...
Click to collapse
still no luck ?.
did you try drivers from pdanet?..
did u use "run as admininstrator" for running flashtool... then try without that. because for me, bin4ry rooting donot wrk if i use run as admin option!..
in one tutorial i found
"Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode."
http://forum.xda-developers.com/showthread.php?t=1982587
so try keeping the cwm recovery.img in the same place as stock recovery was .. ( this is a wild wild gues) ..
Year I m tried a lot of trying I though buying an android will b a good move
But I think I ll stick to windows.
Thanx a lot bro for ur help n effort keep ur work up
I m going 2 sell canvas 2 I thought dev on xda will help me but no one is boughther about jb root
If any news about its root plz tel me
hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up
mmxa110user said:
hey , dont loose hope yet bro..i know u hav done all steps correctly. but in my opinion, u need to have more patience ,,..you havent tried all your options yet....
other options are to run spflashtools in a different windows version...may b ur neighbours PC... with drivers freshly installed..
or wait for some jb root tools to come up
Click to expand...
Click to collapse
I'll surely wait
thanx dude
if something new comes up please notify me
tk care
Flash tool @ 0%
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....
Josephxxx said:
I tried all possible methods for rooting for months and still the progress bar is @ 0%.... can anyone help me???
you will be given reward in cash.....
pleaseeeeeee.....
Click to expand...
Click to collapse
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....
tanmay5 said:
Humm it seems all are having similar problem ....
the best solution will be is to proceed freshly i.e format your windows and start again
remember install drivers properly and then use flash tool
see the results n keep posting .....
Click to expand...
Click to collapse
If u have CWM or twrp Recovery...just download su update from here - http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip copy it to sd card & flash it via CWM or TWRP. maybe it will help u.
Requirements:
1)MTK Driver_Auto_Installer_v5.1453.03
MOD EDIT: REMOVED
2)SP_Flash_Tool_exe_Windows_v5.1452.00.000
MOD EDIT: REMOVED
3)Micromax-Q380 stock rom lollipop
MOD EDIT: REMOVED
Note: turn off your phone (if there is already a bootloop, try reboot to stock recovery by pressing both volume up and power button, then press power down option to turn off your phone)
1)First extract and install Driver Auto Installer v5.145 in windows
2)now extract and run as administrator sp flash tool or flash tool.exe
3)click scatter file loading and select MT6582_Android_scatter.txt (note: the scatter file can be found by extracting 'Micromax-Q380 stock rom lollipop.rar' in a separate folder)
4)choose options click usb radio button, select high speed, select DA download all with checksum
5)from dropdown list select download only option in main window
6)make sure you already turn off your phone
7)click download button and immediately connect usb cable
8)first pink,red color apperars,then yellow progress bar and then green circle to finish the flash download
you are now safe to disconnect and turn on your phone
9)first boots take a longer time
10)after completing go to settings and do a factory data reset which makes phones faster or it becomes normal
network is not showing
Sir i m taking ur stock rom q380 spark canvas ..after taking.. Mobile network is not showing even sim card detecting...pls help me..as soon as possible
.pls
Pradeep gautam said:
Sir i m taking ur stock rom q380 spark canvas ..after taking.. Mobile network is not showing even sim card detecting...pls help me..as soon as possible
.pls
Click to expand...
Click to collapse
bro do a factory reset bro if you not yet rooted, if you rooted do data wipe through TWRP recovery
im not able to do that becoz of the error 1012 plzzz help..ihave not rooted or installed any custom rom..plzz help..or please post a video or give a solution to this..thanku..
Sim network not detected in rom . how to solve my problem step by step process.
Please provide TWRP recovery for Micromax Canvas Spark....
Sent from my Spice Mi-445 using xda Forums PRO
@[P]
@naveenay, Sorry to bother you.
After flashing v8.0.8, I have lost my IMEI, I restored it via Engg. Mode. But its temp.
Need ur help regarding permanency of my IMEI.
Also, I googled fr that and found a method but Android CDC Driver is unable to install in my Comp. (WIN7).
Need your help regarding this issue (IMEI) ASAP. Also, if possible, please provide DB and Modem files from Stock Firmware.
Thank You!
Hi Naveen vai
Mere canvas spark ka accidently all system apps delete ho chuka h
3 ya 4 shopping ka apps bcha hua h .....o v open nhi ho rha h....
Plz btao vai kya kru
Sent from my GT-S5360 using XDA Free mobile app
your imei number is invalid bro
check the imei no. *#06#.
when the invalid no
then download kingroot and root your divice then download chamelephone apps and type your emei number then restart your cellphone
Dude can u make cynogen custom rom for micromax canvas spark because i want it very much ya koi aur
Please help me !
My micromax canvas spark q380
Is got brick while flashing recovery.img
Specially help me regarding drivers and of q380
Easy and working steps of flashing stock rom of q380
Sent from my GT-S7582 using XDA Free mobile app
issues while flashing stock rom
hi bro.
i tried to install stock rom on my softbricked micromax canvas spark.but its not working.i think those drivers are not working on my device with windows 8.1.coz i think you posted drivers fors windows7,xp and 8.when i tried to install those drivers some errors occured and while trying to flash there is no responce and it is not showing any speed detais..plz help me resolve the issue and post drivers for win8.1.
thanks in advance
After clicking on download. no colour progress bar is coming. it is stuck on it..please help...can not tell whether it is even owrking or not.
my phone is struck , after i flashed the rom downloaded form the above link for my mmx canvas spark .
power key does'nt. any suggestions ??
canvas spark has inbuilt battery
it has in buit battery so when connected to pc it get charged and show logo and charging image
then how can appply stock rom in to it
naveenay said:
bro do a factory reset bro if you not yet rooted, if you rooted do data wipe through TWRP recovery
Click to expand...
Click to collapse
Not working Naveen bhai.. after factory reset..
Plzzz ... tell us how to do it... network not showing..
How to install custom ROM without losing imei number?
Thanks for the stock rom of micromax q380...
Easiest way is use sp flash tool latest version only download ur q380 stock os
Bro i want cm12.1 software on micromax canvas spark
I am not able to connect the micromax AQ4501 despite trying several drivers. SP Flash tool is not detecting the phone. I tried to connect another micromax phone and succeeded. I successfully installed rom on that Micromax A120 by using SP flash tool. But i cant connect this AQ4501. Could you please help me ?
nithinjn said:
I am not able to connect the micromax AQ4501 despite trying several drivers. SP Flash tool is not detecting the phone. I tried to connect another micromax phone and succeeded. I successfully installed rom on that Micromax A120 by using SP flash tool. But i cant connect this AQ4501. Could you please help me ?
Click to expand...
Click to collapse
Yesterday, I fixed the issue myself. I unlocked the phone first. That was why the phone doesnt connect to the SP flash tool. After unlock, I connected and flashed the rom :good:
I'm glad that you fixed your problem.
Thread closed.
I have tried flashing using Sp tools and using adb but none works for me as the MTK VCom drivers , usb drivers do not detect my device which is SOFT BRICKED...! I properly installed all the drivers by disabling the signature verification.. still no luck.. pls tell if there is any way i can copy the stock rom in sd card n then apply update.. i tried before but it showed installation aborted cuz maybe it requires official stock rom.. pls help someone..! What should i do.???
i download micromax canvas evok e483 stock rom and its necessary drivers and installer but when i try to install with fastboot mode i think it get bricked it stuck on a duck logo when i try to install it with speadtrum it asks for .pac file in stock rom folder which is not present in my stock rom folder please help me twll the full process to install in it .......
ayushswm said:
i download micromax canvas evok e483 stock rom and its necessary drivers and installer but when i try to install with fastboot mode i think it get bricked it stuck on a duck logo when i try to install it with speadtrum it asks for .pac file in stock rom folder which is not present in my stock rom folder please help me twll the full process to install in it .......
Click to expand...
Click to collapse
list the files present in the stock rom folder
i download micromax canvas evok e483 stock rom and its necessary drivers and installer but when i try to install with fastboot mode i think it get bricked it stuck on a duck logo when i try to install it with speadtrum it asks for .pac file in stock rom folder which is not present in my stock rom folder please help me twll the full process to install in it ......
harishbisht07 said:
i download micromax canvas evok e483 stock rom and its necessary drivers and installer but when i try to install with fastboot mode i think it get bricked it stuck on a duck logo when i try to install it with speadtrum it asks for .pac file in stock rom folder which is not present in my stock rom folder please help me twll the full process to install in it ......
Click to expand...
Click to collapse
Use SP flashtool, it was ceated by @Hovatek, I believe, the member that posted above your post, I'm sure they will get you straight.
Sent from my LGL84VL using Tapatalk