Database Info

[HELP] [REBOOT] Not rebooting niether switching on instantly

Hello guys
My MMX a110 is not restarting niether rebooting from any button.. only goes switched off. Then i have to remove battery than again put then again have to wait for 15 to 20 min then i try to switch on by holding power key it starts..
Not any other thing is working..
When i tried to boot into recovery using power and volume keys it shows option for recovery and factory mode but after selecting recovery .. goes dead
.
Niether charging is working during switched off state..
.
Tried to boot into recovery via mobile uncle tool and rom manager.. but just goes blank dead...
Exactly when the prob occur..
In Reborn final my phone were all ok..
I flashed JMP IceStone JB by CWM recovery after making backup of reborn. But in JMP icestone charging were not working in switched off state.. in JMP icestone i installed only 4cylTurbo , viper4audio.. but viper didnt worked.
Then i clear catch.. format system data catch.
Then i restored what i backed up using CWM. And my phone again in Reborn final
Usually i frequently use CWM for installing patches.. but suddenly it doesn't boot into recovery and happened what i wrote above.. i tried many time but happened same and i have to wait for half an hour for switching on again..
.
Now ur answer wud be
1) i lost my recovery
but
in between once it booted into CWM and i installed some patch also..
In between it also has shown charging in switched off state..
2) falsh using sptool any rom / stock rom.. etc etc... but i want to know where wud b prob..?
And can i solve this prob without using pc..
Sent from my Micromax A110 (Canvas 2) using xda app-developers app

problem is in your device's bootloader . so better use pc and flash it again and install a new boot loader .. hit thanks if i helped )
Sent from my Micromax A110 using xda premium

maddyrokieasta said:
problem is in your device's bootloader . so better use pc and flash it again and install a new boot loader .. hit thanks if i helped )
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Thanx
I will try it soon.
Sent from my Micromax A110 (Canvas 2) using xda app-developers app

[Q] (HELP) How to unbrick hardbrick micromax a110

please someone tell me how to unbrick hardbricked micromax a110

do u try flash stock jb via flashtool?? if u try what ur facing probem??
Sent from my Micromax CANVAS HD using xda app-developers app

When i try to flash jelly bean rom via sp flashtool after that my phone is not booting up and when i retry to flash rom via sp flashtool it is not showjng in sp flashtool
Sent from my Micromax A110 using xda premium

go to service station like noob..... they will check it they found problem with cpu or any hardware they will replce it... or replace PCB
Sent from my Micromax CANVAS HD using xda app-developers app

clean your ExtSD before visit..(important)
i.e. any ROM, Recovery, flash file..
keep only Android defualt folder & your media (MP3, Video)

bro no one check.... sd card .... he give u sd card when u give them mobile... beacasue its mendatory

You can flash stock jb through SP Flash Tool :highfive:

hey my mmx a110 is rooted..
recently i tried to reset my phone by normal settings reset method not cwm reset..
now when i press power on button it shows the reset logo n then again reboots n again reappears the reset logo..
n again reboots...
plz help me fast.....
:crying:

Very easy- flash clockworkmod recovery with sp flash tool again, after flashing recovery go into recovery and do what ever you want
Sent from my Micromax A110 using Tapatalk 4

U should atleast try a little to find the solution of ur problem b4 creating a new thread..'
Well just go this thraed...it would probably solve ur issue':thumbup:
BEST OF LUCK
LINK: http://forum.xda-developers.com/showthread.php?t=2376667

hey i tried to flash recovery using sp flash tool but showed n error...
and now its not booting up..
i long pressed the power button but still not booting....
pls pls help....
:crying:

Micromax A92 Stuck at canvas logo...Urgent Help Pls

hello friends,
i,m using Micromax canvas lite A92.........Today when phone suddenly goes rebooted n stuck on Canvas Logo.
what i done:
1) Remove the battery , put it again n restarted the phone...but phone stuck on Canvas Logo , white screen is flashed n then stuck on Canvas logo and same thing repeats.
2) Again remove the battery n put it back, Presss Power + Vol up + vol down to get into recovery mode, i got 2 options 1 one for recovery mode n 2 for factory mode....but when i selected any using vol up/down button, the phone again stuck at canvas logo n i cant enter into recovery mode.
my phone is not rooted too....n i ,m also unable to do factory reset as reocvery mode is not working for me..
Guys pls help.......what can i do now.........i need urgent help of yours..
thanx in advance...

just flash the stockrom

flash using sp tool
niftysid said:
hello friends,
i,m using Micromax canvas lite A92.........Today when phone suddenly goes rebooted n stuck on Canvas Logo.
what i done:
1) Remove the battery , put it again n restarted the phone...but phone stuck on Canvas Logo , white screen is flashed n then stuck on Canvas logo and same thing repeats.
2) Again remove the battery n put it back, Presss Power + Vol up + vol down to get into recovery mode, i got 2 options 1 one for recovery mode n 2 for factory mode....but when i selected any using vol up/down button, the phone again stuck at canvas logo n i cant enter into recovery mode.
my phone is not rooted too....n i ,m also unable to do factory reset as reocvery mode is not working for me..
Guys pls help.......what can i do now.........i need urgent help of yours..
thanx in advance...
Click to expand...
Click to collapse
Flash ur phone using sp flash tool. find stock rom on www[.]needrom[.]com
or find on xda for pre rooted rom.
this will definitely help u.

it means your phone is bricked and hang at bootloop so the soluton is
is to flash rom using sp flash tool
you need 2 software
1)sp flash tool
2)mtk drivers
if u want me to reply a full tutorial u can tell me coz i have no much time
or ucan watch turials in youtube
as searching"how to flash rom in micromax 98"
and i think that you have to tell me more about what happen that time or which software u were installing etc
feel free to reply me

niftysid said:
hello friends,
i,m using Micromax canvas lite A92.........Today when phone suddenly goes rebooted n stuck on Canvas Logo.
what i done:
1) Remove the battery , put it again n restarted the phone...but phone stuck on Canvas Logo , white screen is flashed n then stuck on Canvas logo and same thing repeats.
2) Again remove the battery n put it back, Presss Power + Vol up + vol down to get into recovery mode, i got 2 options 1 one for recovery mode n 2 for factory mode....but when i selected any using vol up/down button, the phone again stuck at canvas logo n i cant enter into recovery mode.
my phone is not rooted too....n i ,m also unable to do factory reset as reocvery mode is not working for me..
Guys pls help.......what can i do now.........i need urgent help of yours..
thanx in advance...
Click to expand...
Click to collapse
If you have any nandroid backup you can flash it or take it from anyone else. For this you would have to install Clackwork Mod Recovery.
You can also flash the stock rom using the SP Flash Tool.

My canvas lite A92 Bluetooth n wifi not working.... means not switching on
..
What can i do??
Sent from my Micromax A110 using XDA Premium 4 mobile app

Flash the stock rom by sp tool software...
Sent from my Micromax A92 using XDA Premium 4 mobile app

Stuck at logo
ganeshyemul said:
Flash ur phone using sp flash tool. find stock rom on www[.]needrom[.]com
or find on xda for pre rooted rom.
this will definitely help u.
Click to expand...
Click to collapse
You may also try some custom ROM. Good ones are available in XDA

[Q] micromax canvas a74 freezes on boot start logo

as i am new to rooting and all i read about root and its advantages so i rooted my device (Micromax Canvas Fun A74) using framaroot.apk it rooted sucess fully but when i tried to install cwm recovry using any app which i found on xda forum sorry i forgot that app name so when click to install cwm recovery my android stuck and then i removed battery and when i turn on again it just remains stuck on the start logo i tried everything like factory reset ,removal of battery ,odin etc but it still stuck there
so plz plz plz i need help how to repair my android

fix
Your phone won't do much since it was reset. You will need to put an update on the SDcard and go into recovery mode. Then, select "update from sdcard".

jbaker22 said:
Your phone won't do much since it was reset. You will need to put an update on the SDcard and go into recovery mode. Then, select "update from sdcard".
Click to expand...
Click to collapse
i tried to do that earier but installisation failed

The same thing happend to me also even I didn't do anything after rooting.. Then I've given my mobile in service centre.. They replaced the motherboard
Sent from my Micromax A74 using XDA Premium 4 mobile app

ajdk said:
as i am new to rooting and all i read about root and its advantages so i rooted my device (Micromax Canvas Fun A74) using framaroot.apk it rooted sucess fully but when i tried to install cwm recovry using any app which i found on xda forum sorry i forgot that app name so when click to install cwm recovery my android stuck and then i removed battery and when i turn on again it just remains stuck on the start logo i tried everything like factory reset ,removal of battery ,odin etc but it still stuck there
so plz plz plz i need help how to repair my android
Click to expand...
Click to collapse
Do you have a sp flash tool backup ? if you have one flash it your phone will back to normal..

Install stock rom of mmx a74 then flash it through sp flash tool
Sent from my Micromax A74 using XDA Free mobile app

Micromax canvas spark q380 stock rom installation

Requirements:
1)MTK Driver_Auto_Installer_v5.1453.03
MOD EDIT: REMOVED
2)SP_Flash_Tool_exe_Windows_v5.1452.00.000
MOD EDIT: REMOVED
3)Micromax-Q380 stock rom lollipop
MOD EDIT: REMOVED
Note: turn off your phone (if there is already a bootloop, try reboot to stock recovery by pressing both volume up and power button, then press power down option to turn off your phone)
1)First extract and install Driver Auto Installer v5.145 in windows
2)now extract and run as administrator sp flash tool or flash tool.exe
3)click scatter file loading and select MT6582_Android_scatter.txt (note: the scatter file can be found by extracting 'Micromax-Q380 stock rom lollipop.rar' in a separate folder)
4)choose options click usb radio button, select high speed, select DA download all with checksum
5)from dropdown list select download only option in main window
6)make sure you already turn off your phone
7)click download button and immediately connect usb cable
8)first pink,red color apperars,then yellow progress bar and then green circle to finish the flash download
you are now safe to disconnect and turn on your phone
9)first boots take a longer time
10)after completing go to settings and do a factory data reset which makes phones faster or it becomes normal

network is not showing
Sir i m taking ur stock rom q380 spark canvas ..after taking.. Mobile network is not showing even sim card detecting...pls help me..as soon as possible
.pls

Pradeep gautam said:
Sir i m taking ur stock rom q380 spark canvas ..after taking.. Mobile network is not showing even sim card detecting...pls help me..as soon as possible
.pls
Click to expand...
Click to collapse
bro do a factory reset bro if you not yet rooted, if you rooted do data wipe through TWRP recovery

im not able to do that becoz of the error 1012 plzzz help..ihave not rooted or installed any custom rom..plzz help..or please post a video or give a solution to this..thanku..

Sim network not detected in rom . how to solve my problem step by step process.

Please provide TWRP recovery for Micromax Canvas Spark....
Sent from my Spice Mi-445 using xda Forums PRO

@[P]
 @naveenay, Sorry to bother you.
After flashing v8.0.8, I have lost my IMEI, I restored it via Engg. Mode. But its temp.
Need ur help regarding permanency of my IMEI.
Also, I googled fr that and found a method but Android CDC Driver is unable to install in my Comp. (WIN7).
Need your help regarding this issue (IMEI) ASAP. Also, if possible, please provide DB and Modem files from Stock Firmware.
Thank You!

Hi Naveen vai
Mere canvas spark ka accidently all system apps delete ho chuka h
3 ya 4 shopping ka apps bcha hua h .....o v open nhi ho rha h....
Plz btao vai kya kru
Sent from my GT-S5360 using XDA Free mobile app

your imei number is invalid bro
check the imei no. *#06#.
when the invalid no
then download kingroot and root your divice then download chamelephone apps and type your emei number then restart your cellphone

Dude can u make cynogen custom rom for micromax canvas spark because i want it very much ya koi aur

Please help me !
My micromax canvas spark q380
Is got brick while flashing recovery.img
Specially help me regarding drivers and of q380
Easy and working steps of flashing stock rom of q380
Sent from my GT-S7582 using XDA Free mobile app

issues while flashing stock rom
hi bro.
i tried to install stock rom on my softbricked micromax canvas spark.but its not working.i think those drivers are not working on my device with windows 8.1.coz i think you posted drivers fors windows7,xp and 8.when i tried to install those drivers some errors occured and while trying to flash there is no responce and it is not showing any speed detais..plz help me resolve the issue and post drivers for win8.1.
thanks in advance

After clicking on download. no colour progress bar is coming. it is stuck on it..please help...can not tell whether it is even owrking or not.

my phone is struck , after i flashed the rom downloaded form the above link for my mmx canvas spark .
power key does'nt. any suggestions ??

canvas spark has inbuilt battery
it has in buit battery so when connected to pc it get charged and show logo and charging image
then how can appply stock rom in to it

naveenay said:
bro do a factory reset bro if you not yet rooted, if you rooted do data wipe through TWRP recovery
Click to expand...
Click to collapse
Not working Naveen bhai.. after factory reset..
Plzzz ... tell us how to do it... network not showing..

How to install custom ROM without losing imei number?

Thanks for the stock rom of micromax q380...

Easiest way is use sp flash tool latest version only download ur q380 stock os

Bro i want cm12.1 software on micromax canvas spark