as i am new to rooting and all i read about root and its advantages so i rooted my device (Micromax Canvas Fun A74) using framaroot.apk it rooted sucess fully but when i tried to install cwm recovry using any app which i found on xda forum sorry i forgot that app name so when click to install cwm recovery my android stuck and then i removed battery and when i turn on again it just remains stuck on the start logo i tried everything like factory reset ,removal of battery ,odin etc but it still stuck there
so plz plz plz i need help how to repair my android
fix
Your phone won't do much since it was reset. You will need to put an update on the SDcard and go into recovery mode. Then, select "update from sdcard".
jbaker22 said:
Your phone won't do much since it was reset. You will need to put an update on the SDcard and go into recovery mode. Then, select "update from sdcard".
Click to expand...
Click to collapse
i tried to do that earier but installisation failed
The same thing happend to me also even I didn't do anything after rooting.. Then I've given my mobile in service centre.. They replaced the motherboard
Sent from my Micromax A74 using XDA Premium 4 mobile app
ajdk said:
as i am new to rooting and all i read about root and its advantages so i rooted my device (Micromax Canvas Fun A74) using framaroot.apk it rooted sucess fully but when i tried to install cwm recovry using any app which i found on xda forum sorry i forgot that app name so when click to install cwm recovery my android stuck and then i removed battery and when i turn on again it just remains stuck on the start logo i tried everything like factory reset ,removal of battery ,odin etc but it still stuck there
so plz plz plz i need help how to repair my android
Click to expand...
Click to collapse
Do you have a sp flash tool backup ? if you have one flash it your phone will back to normal..
Install stock rom of mmx a74 then flash it through sp flash tool
Sent from my Micromax A74 using XDA Free mobile app
Related
Hello guys
My MMX a110 is not restarting niether rebooting from any button.. only goes switched off. Then i have to remove battery than again put then again have to wait for 15 to 20 min then i try to switch on by holding power key it starts..
Not any other thing is working..
When i tried to boot into recovery using power and volume keys it shows option for recovery and factory mode but after selecting recovery .. goes dead
.
Niether charging is working during switched off state..
.
Tried to boot into recovery via mobile uncle tool and rom manager.. but just goes blank dead...
Exactly when the prob occur..
In Reborn final my phone were all ok..
I flashed JMP IceStone JB by CWM recovery after making backup of reborn. But in JMP icestone charging were not working in switched off state.. in JMP icestone i installed only 4cylTurbo , viper4audio.. but viper didnt worked.
Then i clear catch.. format system data catch.
Then i restored what i backed up using CWM. And my phone again in Reborn final
Usually i frequently use CWM for installing patches.. but suddenly it doesn't boot into recovery and happened what i wrote above.. i tried many time but happened same and i have to wait for half an hour for switching on again..
.
Now ur answer wud be
1) i lost my recovery
but
in between once it booted into CWM and i installed some patch also..
In between it also has shown charging in switched off state..
2) falsh using sptool any rom / stock rom.. etc etc... but i want to know where wud b prob..?
And can i solve this prob without using pc..
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
problem is in your device's bootloader . so better use pc and flash it again and install a new boot loader .. hit thanks if i helped )
Sent from my Micromax A110 using xda premium
maddyrokieasta said:
problem is in your device's bootloader . so better use pc and flash it again and install a new boot loader .. hit thanks if i helped )
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Thanx
I will try it soon.
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
please someone tell me how to unbrick hardbricked micromax a110
do u try flash stock jb via flashtool?? if u try what ur facing probem??
Sent from my Micromax CANVAS HD using xda app-developers app
When i try to flash jelly bean rom via sp flashtool after that my phone is not booting up and when i retry to flash rom via sp flashtool it is not showjng in sp flashtool
Sent from my Micromax A110 using xda premium
go to service station like noob..... they will check it they found problem with cpu or any hardware they will replce it... or replace PCB
Sent from my Micromax CANVAS HD using xda app-developers app
clean your ExtSD before visit..(important)
i.e. any ROM, Recovery, flash file..
keep only Android defualt folder & your media (MP3, Video)
bro no one check.... sd card .... he give u sd card when u give them mobile... beacasue its mendatory
You can flash stock jb through SP Flash Tool :highfive:
hey my mmx a110 is rooted..
recently i tried to reset my phone by normal settings reset method not cwm reset..
now when i press power on button it shows the reset logo n then again reboots n again reappears the reset logo..
n again reboots...
plz help me fast.....
:crying:
Very easy- flash clockworkmod recovery with sp flash tool again, after flashing recovery go into recovery and do what ever you want
Sent from my Micromax A110 using Tapatalk 4
U should atleast try a little to find the solution of ur problem b4 creating a new thread..'
Well just go this thraed...it would probably solve ur issue':thumbup:
BEST OF LUCK
LINK: http://forum.xda-developers.com/showthread.php?t=2376667
hey i tried to flash recovery using sp flash tool but showed n error...
and now its not booting up..
i long pressed the power button but still not booting....
pls pls help....
:crying:
please help me to unbrick my xolo a500
it is in a soft brick and dont have cwm recovery installed
all stared when tried to install the driver of chainfire 3d
what can i do
Have u tried enter the emergency mode?
Sent from my WT19i using xda premium
ur phone has which cpu??? mence mtk or other??
Its was foolish of you to install cf3D when its clearly says no ics support
Well you can flash cwm using fastboot method and flash your stock rom
sent from my super advanced mini fridge
Do u have ur mobile model stock rom??
Sent from my Micromax A116 using xda premium
daviyankee said:
please help me to unbrick my xolo a500
it is in a soft brick and dont have cwm recovery installed
all stared when tried to install the driver of chainfire 3d
what can i do
Click to expand...
Click to collapse
Download Stock/ custom rom for XOLO A500 (Search In google or XDA )
Download CWM Recovery
Place Rom in memory card
Remove and install battery press vol up then press power key to get bootloader mode
flash this CWM recovery then flash rom through CWM
A500 Not booting
professor_proton said:
Its was foolish of you to install cf3D when its clearly says no ics support
Well you can flash cwm using fastboot method and flash your stock rom
sent from my super advanced mini fridge
Click to expand...
Click to collapse
I installed auto swapper script from some post, and now my cell is not booting,
i have download stock rom but it does not have scatter.txt, i have SP flash tool and drives and all things.
even i have download blu dash4.0 but its not completing, error message update failed.
please help me to install stock rom please
i do not know how to flash with SP flash tool,
so please provide me steps
sonujain10 said:
I installed auto swapper script from some post, and now my cell is not booting,
i have download stock rom but it does not have scatter.txt, i have SP flash tool and drives and all things.
even i have download blu dash4.0 but its not completing, error message update failed.
please help me to install stock rom please
i do not know how to flash with SP flash tool,
so please provide me steps
Click to expand...
Click to collapse
download cwm recovery from here https://www.dropbox.com/s/h3w1doejuh3ecq4/cwm_a500.img
flash using fastboot (bootloader)
reboot to recovery
cwm 6 will be there
flash stock rom
Xolo q500 softbricked
Can Anyone Help me. My Xolo Q500 is softbricked. It is niether booting normally nor booting to recovery menu. I have tried sp flash tools but the stock rom of my phone which i downloaded does not contain any scatter file, probably because it is a Qualcomm based device. Please help me..................
xolo q500 dead after formatted
sir please help me i do have the same problem
xolo q 500 i soft bricked using format while connect in the smart upgared tool
i tried to flash but its ask disk to be formatted i am unaware of it so i mistakenly formatted now the phone is not getting turn on
or in the recovery mode please help or tell me the procedure
Hi guys,
My MICROMAX CANVAS A117 is stuck on boot logo\screen.
I tried to flash twrp recovery using Mobile Uncle Tools and i booted to recovery after the install. But the recovery didnt appear and my phone rebooted on its own. HELP! only factory mode is available idk about it. HOW TO RECOVER MY PHONE.??
PLEASE COMMENT ANY POSSIBLE METHOD USing SP FLASH TOOLS.
XdaPoseidon said:
Hi guys,
My MICROMAX CANVAS A117 is stuck on boot logo\screen.
I tried to flash twrp recovery using Mobile Uncle Tools and i booted to recovery after the install. But the recovery didnt appear and my phone rebooted on its own. HELP! only factory mode is available idk about it. HOW TO RECOVER MY PHONE.??
PLEASE COMMENT ANY POSSIBLE METHOD USing SP FLASH TOOLS.
Click to expand...
Click to collapse
just flash stock recovery from sp slash tool....deselecting everything else
If that does not work....flash the whole stock rom
Hey..
Thnx for the reply..I will try it out.
Were u successful in doing it? Pls help mr too as m also stuck kn boot logo .. A117..rply asap
I had tried to use Mobileuncle tool for custom recovery with the help philz img but after doing this now I am unable to go in recovery mode, when I m trying to go it's rebooting again n again, but able to enter in factory mode, plz help(for rooting the phone I am using Kingroot):crying:
(Using lollipop 5.0)
Plz help guys....
Gyandeepg44 said:
I had tried to use Mobileuncle tool for custom recovery with the help philz img but after doing this now I am unable to go in recovery mode, when I m trying to go it's rebooting again n again, but able to enter in factory mode, plz help(for rooting the phone I am using Kingroot):crying:
(Using lollipop 5.0)
Plz help guys....
Click to expand...
Click to collapse
try to flash stock kitkat or lollipop rom sp flash tool
Sent from my Nexus 7
adeelraj said:
try to flash stock kitkat or lollipop rom sp flash tool
Sent from my Nexus 7
Click to expand...
Click to collapse
Actually I am not aware that how to flash so can you plz step by step.
this link has complete step by step guide
a bit lenghthy but works 100%
http://forums.androidcentral.com/go...1477-guide-nexus-7-factory-image-restore.html
Sent from my N901C using Tapatalk 2
guys I have micromax unite2 a106 phone. I also tryd to flash philz in it by mobile uncle tools with the help of a thread on xda.
But now when I reboot into recovery, it only shows logo for sometimes and then blank screen.
I think that philz rec was made fir its kitkat version but now it is lollipop updated.
But my recovery is lost.
How to bring it back.....???????? Without pc it will be better.
Same problem is occurring, guys plz help.....
Rustamveer said:
guys I have micromax unite2 a106 phone. I also tryd to flash philz in it by mobile uncle tools with the help of a thread on xda.
But now when I reboot into recovery, it only shows logo for sometimes and then blank screen.
I think that philz rec was made fir its kitkat version but now it is lollipop updated.
But my recovery is lost.
How to bring it back.....???????? Without pc it will be better.
Click to expand...
Click to collapse
flash stock rom via sp flashtool then install recovery again
Gyandeepg44 said:
Same problem is occurring, guys plz help.....
Click to expand...
Click to collapse
Sent from my N901C using Tapatalk 2
Micromachining A106
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me