Database Info

Can't flash with ODIN, can't mount firmware or modem

Sprint Galaxy S5 (SM-G900P)
So, this all started with me trying to downgrade from lollipop to kitkat using ODIN.
ODIN shows:
FAIL! (Auth)
My phone says:
SW REV CHECK FAIL: [aboot] fused 3 > binary 1
After trying a bunch of things, I went into recovery mode/ and formatted everything, including firmware/modem.
Now, II was able to get a ROM running by installing through sideload, but it says invalid sim. This is the factory sim that came with my phone.
I've already tried another working sprint sim, and same result. So I know its not the card.
Also, when II go into recovery/mount and unmount/ it shows firmware and modem unmounted. When I try to mount them, it gives an error.
I thought to flashfirmware, but Odin fails every time.
Help!

hasan86 said:
Sprint Galaxy S5 (SM-G900P)
So, this all started with me trying to downgrade from lollipop to kitkat using ODIN.
ODIN shows:
FAIL! (Auth)
My phone says:
SW REV CHECK FAIL: [aboot] fused 3 > binary 1
After trying a bunch of things, I went into recovery mode/ and formatted everything, including firmware/modem.
Now, II was able to get a ROM running by installing through sideload, but it says invalid sim. This is the factory sim that came with my phone.
I've already tried another working sprint sim, and same result. So I know its not the card.
Also, when II go into recovery/mount and unmount/ it shows firmware and modem unmounted. When I try to mount them, it gives an error.
I thought to flash firmware, but Odin fails every time.
Help!
Click to expand...
Click to collapse
My guess your phone firmware is od3 or newer. Since this is probably true it means you cannot downgrade to kit kat or any firmware older then the current one. I would suggest downloading the latest firmware which OK4 or something to that affect. It was release like maybe a week ago or so. Odin that which shouldn't fail. That should get you able to get her running. I am not sure why you'd want go back to running Kit Kat but you'd want to root the phone or re-root. Then flash a KK ROM only flash. Which would probably have to be a custom one. That might work.

El.Dante565 said:
My guess your phone firmware is od3 or newer. Since this is probably true it means you cannot downgrade to kit kat or any firmware older then the current one. I would suggest downloading the latest firmware which OK4 or something to that affect. It was release like maybe a week ago or so. Odin that which shouldn't fail. That should get you able to get her running. I am not sure why you'd want go back to running Kit Kat but you'd want to root the phone or re-root. Then flash a KK ROM only flash. Which would probably have to be a custom one. That might work.
Click to expand...
Click to collapse
Thanks for responding!
I wanted to downgrade to try an unlock method that requires 4.4.2 or earlier. But know I just want my phone back in proper order.
I found out I was using OA6. Three versions have come out since. I am downloading the latest one now (OG1). I'll let you know if it works.

You were right, a new version came out on 12/2 (OK4). I downloaded it and it flashed over! No errors!
But, it is still is not reading the sim. I can only get 3G connectivity. No LTE. I still cannot mount the firmware or modem in philz touch recovery.
Any ideas?

hasan86 said:
You were right, a new version came out on 12/2 (OK4). I downloaded it and it flashed over! No errors!
But, it is still is not reading the sim. I can only get 3G connectivity. No LTE. I still cannot mount the firmware or modem in philz touch recovery.
Any ideas?
Click to expand...
Click to collapse
theres a dialer code that will reset the entire modem and all data. you may have to reactivate in the settings menu after. (takes 10 secs to reactivate as long as you are not roaming)
if all else fails. go to phone dialer type in ##SCRTN# it will reset your entire data profile. good luck

Similar problem on s5 sprint need help
Hi..
Can u please help me,
I am getting same problem with samsung s5 sprint
I updated it with official android 6.0.1 , and that was a curse for me, my phone is locked now, no network and data,
I cant use ssu.apk on 6.0.1 , and tried to downgrade to 4.4.2, with odin, i downloaded ,2,3 stock roms of 4.4.2 but same problem, i used number of odin versions, even wiped data by recovery, and was no effect ,
This error arises
SW REV CHECK FAIL: [aboot] fused 3 > binary 1
I think u faced the same problem so plz help me what to do ...

hasan86 said:
Sprint Galaxy S5 (SM-G900P)
So, this all started with me trying to downgrade from lollipop to kitkat using ODIN.
ODIN shows:
FAIL! (Auth)
My phone says:
SW REV CHECK FAIL: [aboot] fused 3 > binary 1
After trying a bunch of things, I went into recovery mode/ and formatted everything, including firmware/modem.
Now, II was able to get a ROM running by installing through sideload, but it says invalid sim. This is the factory sim that came with my phone.
I've already tried another working sprint sim, and same result. So I know its not the card.
Also, when II go into recovery/mount and unmount/ it shows firmware and modem unmounted. When I try to mount them, it gives an error.
I thought to flashfirmware, but Odin fails every time.
Help!
Click to expand...
Click to collapse
You did download the drivers for odin? Probably did but I'm just trying to cover everything. When trying to update firmware:
Make sure you get a good download.
Unzip your file and move the Tar file to your desktop.
Make sure debugging is on on your device.
Dnt use a cheap usb cord
Fire up odin
Power your device down completely. Even try a battery pull then do the 3 button combo. Power/vol down/home button all at the same time to get into download mode
Plug in your device and a com number should appear in the upper left indication box.

920i - no sim/no registered network after marshmallow update

Hi,
This is my first post but, I'm an avid lurker. I am having some issues with my girlfriends 920i. It received an OTA update to marshmallow and ever since it won't read the Sim card. I've tried to flash the official fw through Odin and still having the same problem. Because it doesn't read my Sim card, I have zero access to any mobile network settings.
I am wondering if when they updated the marshmallow, I lost unlock capability.
Also, her imei and sn still match. Most of the problems I see people have are mismatched numbers, and her phone seems fine.
Any help would be greatly appreciated.

So, I checked the firmware that I flashed and it was INS which seems to be the locked version.
I flashed the INU firmware this morning but still not reading my SIM.
I'm out of options at this point, I'm going to go back to lollipop and see how that goes.

Hi,
I am having this issue for my SM G-920I since 2/3 Jan, 2017. I am using fine on US Tmobile network since Oct 2015, but all of a sudden got the no SIM, emergency calls only and continues to stay like this.. I am curious to know if you resolved the issue and how. Thanks for any feedback!

Help me please
I'm having the same issue. Just flashed INS 6.0.1 firmware on my brand new G920I and now i can't get any mobile signal or data. Tried to flash ZTO firmware for my country, but same issue. My phone was fine before flashing INS firmware. IMEI it's fine too. Recovery shows: Applied multi-csc. What can i do? ((((((((((

Kyoo x said:
I'm having the same issue. Just flashed INS 6.0.1 firmware on my brand new G920I and now i can't get any mobile signal or data. Tried to flash ZTO firmware for my country, but same issue. My phone was fine before flashing INS firmware. IMEI it's fine too. Recovery shows: Applied multi-csc. What can i do? ((((((((((
Click to expand...
Click to collapse
Do you also see: " No SIM, Emergency calls only" after rebooting the phone? What's the baseband version ?

upengan78 said:
Do you also see: " No SIM, Emergency calls only" after rebooting the phone? What's the baseband version ?
Click to expand...
Click to collapse
Thank you so much for helping me. Baseband version shows: G920IDVU3EPIF
I see only Emergency Calls Only message

Kyoo x said:
Thank you so much for helping me. Baseband version shows: G920IDVU3EPIF
I see only Emergency Calls Only message
Click to expand...
Click to collapse
Try to connect to Wi-Fi only and once connected, check if there are updates for Software/Firmware.

upengan78 said:
Try to connect to Wi-Fi only and once connected, check if there are updates for Software/Firmware.
Click to expand...
Click to collapse
Already updated and tried to downgrade to 5.1.1, but no sucess. I don't think it's a hw problem, cause it was working before the INS firmware flash, and IMEI number still shows right, no matter what rom i flash (now on MIUI). Can i clean EFS partition and try to flash ZTO firmware again, or i might lost my IMEI and get more problems? Also, wondering if advanced wipe with everything checked on TWRP can help. (data, internal storage, system, sbfs, cache, dalvik cache)

Can you open the phone dialer and enter this code *#*#4636#*#* then clikc Phone Information, and send a screenshot of what you see in the screen (Make sure no IMEI in the screenshot, before you post it here) ? Also check if Radio is OFF or ON.

upengan78 said:
Can you open the phone dialer and enter this code *#*#4636#*#* then clikc Phone Information, and send a screenshot of what you see in the screen (Make sure no IMEI in the screenshot, before you post it here) ? Also check if Radio is OFF or ON.
Click to expand...
Click to collapse
Codes on my dialer doesn't work, but i'm sure the IMEI is right cause it's showing in phone information. Also, radio is on cause when i search for mobile networks the carriers of my country appears on the screen but when i click on then, just appears a message saying that can't connect

Same problem, any solutions?

I had same issue for over a year, you can check details in my thread, resolved by factory warranty motherboard replacement (free of charge, even thou knox was tripped when I bought it, and I told lady in authorised repair shop that i don`t have warranty).
Forgot to mention that I also tried to repair it via Octoplus box, both by me and some other people (wanted a second opinion), DRK fixed, few new certs written, etc.), not only by flashing fw via Odin or Smart Switch.
And I was 99% sure it was hw, turns I was right.
P.S. country dependable: - in some countries they will probably want to sell you a new motherboard in Samsung (happened to me), but in other factory warranty will be accepted (probably, if the phone is not older than 3 yrs I guess)

S6 not recognizing SIM card (No Service)

After installing a custom ROM on my galaxy s6 it would no longer recognize my SIM card. I did wipe every option in TWRP recovery before flashing the ROM which might have something to do with the issue. The phone states "No SIM Card - No Service" in the top left of the lock screen, it also wont let me call any numbers to edit things in the phone. I have done some research and it sounds like I have wiped the sim and lost the IMEI/EFS data and therefore no longer have access to my sim. I was wondering if there was any possible fix or should I just send it off to Samsung to get repaired?

Did you back up the EFS partition, and put it somewhere safe? If not, you have a paperweight.
Repair won't be covered under warranty.
Sent from my SM-G920F using Tapatalk

Unfortunately I didn't back up the EFS partition. Situation is looking bad. :l

Try dialnig *#06# and see does it shows IMEI and sn, alo try *#0011# select stack 1 and check whether IMEI is OK, or NG.
Also what does it say in phone settings under baseband? Do you have mobile networks menu in settings?
You can try Smart Switch emergency initialization with sn of the phone if IMEI is ok (it will install latest stock fw for your phone) and see if that helps.

When I typed in "*#06#" The SN number was shown however the IMEI number was not. When I typed in "*#0011#" There was nothing but blank spaces separated by grey lines, I tried selecting row 1 however nothing happened. My base band version is "Unknown" listed under settings. I do however have the network settings listed in settings. In Smart Switch when I try to run the device initialization it states that my s6 "doesn't support initialising". I have flashed three different downloads of the stock rom to my phone using ODIN and have had no luck with any of them.

well Smart Switch always says that S6 is not supported, but initialization can be done anyway, just dont connect the phone until it asks you to do so, instructions below:
http://forum.xda-developers.com/galaxy-s6/help/how-to-smart-switch-emergency-t3383448
What is your model anyway, do you know which region fw was originaly on the phone, and which sv rev is shown in the download mode?
does in recovery mode says anything about DRK?

Unfortunately Smart Switch says that "'SM-G920F' does not support initialing. Please contact out service center." Even when I have entered the correct S/N and device model, as well as not plugging in the phone. My device model is the SM-G920F. I don't know the original region FW that was originally on the phone, however it was purchased in the UK and that is where I am have been ever since I bought the phone. The SWREV is: "B:3 K:2 S:2" in download mode. I currently have TWRP recovery installed so is there a place for me to search for the DRK in TWRP? Or should I re-flash the stock recovery using Odin?

that is weird, I reinitialized my g920f many times without any issue. DRK error is usually shown in stock recovery. does the phone boots up with stock fw, and are you using any custom kernel?

i got the same problem when I flashed xtrolite and alexis custom ROM on my S6, both ROM after flashing I got no service.
But I did a full stock backup in TWRP.

baseband unknown means that there is a problem with modem part of fw. and I dont know what fw you flashed. you said that you tried to flash stock, but it doesn`t work, but a little more details would maybe make a difference, like which fw, and what exactly is happening, what does about the phone menu says.
So far, since baseband is unknown I would try to flash modem fw with odin (for exact fw that is in the phone). before that usb settings should be set to CP, by dialing *#0808#
or if you decide tu run custom fw, you can always try asking in that rom thread, maybe someone already had issues like that with that rom and fixed them, or the developer of that rom can help fix it.

Boot your s6 to download and flash stock rom via odin from samsung it maybe work

Add wifi calling, no root

Hi,
I would like to enable wifi calling on my phone without root.
I feel I am in a favorable situation, but this is far beyond my league:
I know someone with a samsung s6 of the same model, with the same operator and with wifi calling enabled.
So I was wondering if I could "flash" the rom from this mobile and install it on mine.
- is this feasible?
- how should I do that?
- can I get a unrooted phone in the end?
Many thanks for your advice!

I think so, mine was a btu international and I've managed to flash h3g uk to get wifi calling. But still i don't think you can do it without tripping knox qnd the reason is that you need to backup your efs partition. If you don't you could end up with a bricked device i bricked mine trying to downgrade it to 5.1.1 the downloads for the fw where so slow that i didn't wait for the 7.0 to finish just flashed it with 5.1.1 to see what happens and from what i remember just flashing the same fw but from another region doesn't work, somebody correct me if I'm wrong. Resurrected mine that was stuck in download mode by flashing 7.0 h3g with repiting ( the download finally finished) was stuck in a bootloop, flashed twrp restored the efs backup, did a format and repair partitions in twrp, flashed the 7 0 h3g again without the repit and nand erase all, flashed twrp again wiped userdata and did a repair for some reason userdata was getting corrupted after a flash, wiped userdata again let it boot, took like 20 mins to boot, touchscreen was inverted, fixed it with *#2663#, made a factory reset and after that flashed h3g 7.0 again without any options selected and after that smooth sailing. Did an update to February update thru smartswitch. Phone runs perfect never gets hot etc but every time i go in twrp and reboot the touchscreen gets screwed again and i have to do the 2663 trick. Hope it helps.

Hi,
Will it work if I put a stock version for S6 SM-G920W8 on a S6 SM-G920R4 using Odin?
Many thanks.

I don't know i have a g920f

[Fixed] My SM-G955U Has No IMEI or Baseband

EDIT:
I was able to fix it! I had to install a custom ROM to obtain root and delete my EFS partition.
So, here is a bit of a story I will try to keep short.
I went to Vietnam and bought a S8+ from there.
It was a US S8+ from Sprint.
I used it fine there but when I came back to states I tried to put my Verizon sim in and it doesn't work.
I don't get any signal. But I am able to see Baseband and IMEI.
So, I tried to use Odin and flash one of the SM-G955U1 Firmware.
Now, my phone is weird and out with no Baseband or IMEI.
So I try to flash back to firmware it was on.
Same thing.
Any ideas why my S8+ is like this?

MLIGN said:
So, here is a bit of a story I will try to keep short.
I went to Vietnam and bought a S8+ from there.
It was a US S8+ from Sprint.
I used it fine there but when I came back to states I tried to put my Verizon sim in and it doesn't work.
I don't get any signal. But I am able to see Baseband and IMEI.
So, I tried to use Odin and flash one of the SM-G955U1 Firmware.
Now, my phone is weird and out with no Baseband or IMEI.
So I try to flash back to firmware it was on.
Same thing.
Any ideas why my S8+ is like this?
Click to expand...
Click to collapse
Can you get into recovery/download mode now? What was the last known version of software you know that was on your phone?
If you can get into recovery, what info are in those details?

JeffDC said:
Can you get into recovery/download mode now? What was the last known version of software you know that was on your phone?
If you can get into recovery, what info are in those details?
Click to expand...
Click to collapse
Sorry for the long wait. If you are still interested.
CARRIER: SPR
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
RP SWREV : B3(1,1,1,1,1) K2 S3
SECURE DOWNLOAD: ENABLE
DID: 205EDC8B7351

- duplicate

MLIGN said:
- duplicate
Click to expand...
Click to collapse
What happens if you restore from the OEM function?

Try downloading custom recovery and flashing a custom rom. You will lose samsung pay but you might have a working phone it's a chance I would take if it was me. Your baseband is messed up try just flashing your carrier baseband . These are just ideas good luck
Sent from my [device_name] using XDA-Developers Legacy app

If flashing a custom ROM will fix your phone then so will downloading latest official Samsung ROM and flashing via latest Odin .
The second option above would be the best to try unless you're happy to have a custom rom and lose Samsung pay and anything that relies on Knox being functional

paul_59 said:
If flashing a custom ROM will fix your phone then so will downloading latest official Samsung ROM and flashing via latest Odin .
The second option above would be the best to try unless you're happy to have a custom rom and lose Samsung pay and anything that relies on Knox being functional
Click to expand...
Click to collapse
Update on the post, I sent it into Samsung. I should hear word soon if they can fix it and how much if anything.

Jtag dead phone to life and rewrite IMEI
First of all my phone is the s8+ G955fd, but I am sure that the people that helped me can help most Samsung owners with bricked phones.
My phone ended up being stuck on the first boot screen, I couldn't get into recovery or download mode. I installed TWRP and after that I lost my IMEI numbers( dual sim), so I tried to reflash stock and thats when i became bricked. I searched someone to help and found reference to the Fonefunshop in England. I sent it there and they said that the eMMC chip was bad. I searched for someone who could write to it or put a new one on the motherboard . I found A2Z cellular in Ottawa Canada. They used jtag to restore it to stock and they told me that the Fonefunshop had not opened the phone which is necessary to use jtag as they claimed, so avoid them.
The phone was now back doing everything it should except the IMEI's were null like before. I gave them the original IMEI's and the phone is working like new.
If your Samsung is bricked these guys can probably fix it and it won't cost much to find out.

the SM-G955U has a locked bootloader, so people should not be telling you to flash a custom recovery or custom ROMs. there is only one way to get root on this phone, through the samfail exploit, and safestrap is the only working recovery. I don't believe it supports CDMA networks but I'm not 100% sure on that. I have this device and I'm only aware of GSM carriers using it.

Just an update on this issue. I still don't have a working Baseband or IMEI. Any clues?

I was able to fix it! I had to install a custom ROM to obtain root and delete my EFS partition via ADB.

MLIGN said:
I was able to fix it! I had to install a custom ROM to obtain root and delete my EFS partition via ADB.
Click to expand...
Click to collapse
Hi. Can you detail how you fixed you phone please? What custom rom did you use and the steps you used please? I have the same phone with the same problem.
Thanks

MLIGN said:
I was able to fix it! I had to install a custom ROM to obtain root and delete my EFS partition via ADB.
Click to expand...
Click to collapse
Be very careful with doing that. It can cause the EFS (the partition that controls IMEI, Mac and a few other things) to be completely corrupted. Which will cause the device to be useless without fixing it.
Now a little heads up. As messing with the IMEI is illegal in many countries (the US being one of them) There are only 2 ways to fix an IMEI issue allowed on XDA.
1. Restore the backed up EFS partition
2. Return it to the OEM to be repaired.

What did you do after you deleted EFS? I can delete in Combination but I dont get the IMEI number back.

Please I need all XDA members assist ,because of I mistake delete EFS with combination file on my G955U VZW , I have null imei number, then I repair it by flash qcn with z3x Samsung tool , but still I have IMEI number but emergency call only is still display without service ,