Hello. I'll try to explain my problem because I really need some help.
A few days ago, I was normally using my Tablet ECS TR10RS1 IntelĀ®.... I turned it off, went to sleep and the next day when I was going to use it again, the OS didn't start, so I tried and tried until I found a forum where they led me to restore a backup file because the original firmware/rom wasn't still available.... publicly. I tried that, but in the process, I accessed the EFI Shell... That wasn't trouble at all, I just plugged the keyboard and typed "exit", and then it let me to the BIOS... And that's when my real problem began: I restored the factory setting default... and it involves "disabling USB ports".... Now, AGAIN, I'm stuck on EFI Shell. But this time, I can not type "exit" since the keyboard is not recognized by the Tablet.
Then I pressed Vol UP + Power ON and I get access to another menu "DNX".... And that's what brings me here to your forum:
I was briefly reading that one of your members managed to flash the BIOS via DNX, so I was wondering if you guys could help me do that to my tablet because I'm not planning to have a really expensive paper holder.
Thanks in advance.
Jinky.
OreoFudge said:
Hello. I'll try to explain my problem because I really need some help.
A few days ago, I was normally using my Tablet ECS TR10RS1 IntelĀ®.... I turned it off, went to sleep and the next day when I was going to use it again, the OS didn't start, so I tried and tried until I found a forum where they led me to restore a backup file because the original firmware/rom wasn't still available.... publicly. I tried that, but in the process, I accessed the EFI Shell... That wasn't trouble at all, I just plugged the keyboard and typed "exit", and then it let me to the BIOS... And that's when my real problem began: I restored the factory setting default... and it involves "disabling USB ports".... Now, AGAIN, I'm stuck on EFI Shell. But this time, I can not type "exit" since the keyboard is not recognized by the Tablet.
Then I pressed Vol UP + Power ON and I get access to another menu "DNX".... And that's what brings me here to your forum:
I was briefly reading that one of your members managed to flash the BIOS via DNX, so I was wondering if you guys could help me do that to my tablet because I'm not planning to have a really expensive paper holder.
Thanks in advance.
Jinky.
Click to expand...
Click to collapse
Hi Jinky
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards.
.
Related
Hey everyone, I'm using a GT-P5100 (3G + Wifi) O2 UK rooted tablet and for the last month it has been broken. It started rebooting itself randomly every now and then, and then suddenly it wouldn't even boot up for 15 seconds before it would restart itself again.
I am able to get into safe mode and I can get into the boot options, but when I factory reset it does nothing, I've tried from the boot menu, from safe-mode options and even from the dial up code.
I tried to connect my tablet to my PC as a media device and format it but that didn't work either; I can't connect it as a disk then format it that way because they took out 'mass storage mode' on this firmware.
I then tried to flash a stock ROM in Odin but every time I tried it would fail until I used Odin.v1.3, but guess what, it rebooted itself and my entire tablet is still exactly the same.
(the option was on AP ram in v1.3 not AP nand I don't know if that makes a difference.)
If anyone can point me in the right direction I would appreciate it so much. I have been trying for weeks to fix this and I just don't know what to do anymore, I tried on another forum but nobody answered me.
Hi,
This would be best posted in your device section so the experts who own your device can help. I will request this be moved to here,
> Samsung Galaxy Tab 2 > Galaxy Tab 2 Q&A, Help & Troubleshooting
Make sure kies is not running to use Odin. End all kies processes in your task manager on the pc.
Good luck!
Thank you very much I have posted it there instead ^^
Thank you. Thread closed.
Hello everyone. first of all I must say that I am Italian, so I apologize if my English is not perfect. Now let me share with you my problem: I have among others a Htc8s for some time after the last updates the baby did not work very well so I decided to try a process to rewrite the Roma since I could not restore it with the hard reset , so I ran into the same process of user Deextaar "The phone is dead
Hello, on the phone I have got an error message where was written insert the install media and something about recovery. So I download the files and I flash it. But unfortunately when i Should push the volume buttons, camera and flash and power button was started I let go of the button and the flash did not finished and now the display is out, the phone will not turn on, flash mode do not working, and after connecting to the PC is displayed That is not working properly. Do you know what I should do? "
It seems incredible but like an idiot I made the same mistakes, and now I find myself with my HTC8S that no charge is not recognized by pc that flashes for a few seconds and sometimes vibrates. Know that you are two weeks I read the post and try different solutions but nothing I can not get it started. I hope you can help me get my jewel. Excuse me while I was down in my first post. In expectation of a prompt Response I greet you and thank you in advance
Hi, thank you for using XDA Assist. The best place to get help is in your device's specific forum here, http://forum.xda-developers.com/htc-8s They are the experts on your device.
Good luck!
Thread closed.
I have a serious problem: my daughter start an update on the rooted tablet (FE170CG). Ofcourse, the tablet stuck. Well, I didn't panic. I've downloaded firmware from ASUS website, and start to flash it with fastboot. But nothing worked. Tried several firmwares, also from producer site, still nothing. After lots of desperate tryies I managed to flash something, but instead of k012 I discovered it waS a k017 image. After that I couldn't use nothing. The Droidboot starts, or in normal boot it loads the ASUS logo ant then stucks there. Can I test the consistency of partitions somehow, or the consistency of the data inside those partitions? Is it possible to be something erased in one of those partitions? Can anybody point me to how to get a diagnose to be able to guess what's crushed?
I can only use the fastboot. Nothing else worked. I couldn't use ADB, for instance, in windows. Also, in Linux I cannot connect the tablet. It shows in lsusb list, but thats all. Don't shows in blkid devices (mounted or not).. How can I solve this very tricky situation?
XDA Visitor said:
I have a serious problem: my daughter start an update on the rooted tablet (FE170CG). Ofcourse, the tablet stuck. Well, I didn't panic. I've downloaded firmware from ASUS website, and start to flash it with fastboot. But nothing worked. Tried several firmwares, also from producer site, still nothing. After lots of desperate tryies I managed to flash something, but instead of k012 I discovered it waS a k017 image. After that I couldn't use nothing. The Droidboot starts, or in normal boot it loads the ASUS logo ant then stucks there. Can I test the consistency of partitions somehow, or the consistency of the data inside those partitions? Is it possible to be something erased in one of those partitions? Can anybody point me to how to get a diagnose to be able to guess what's crushed?
I can only use the fastboot. Nothing else worked. I couldn't use ADB, for instance, in windows. Also, in Linux I cannot connect the tablet. It shows in lsusb list, but thats all. Don't shows in blkid devices (mounted or not).. How can I solve this very tricky situation?
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here are some relevant threads about your device:
http://forum.xda-developers.com/t/fonepade-7
Please look through those threads carefully.
Also, after creating your account, you can ask for help there as well by creating a new topic.
The experts in that forum will be able to help.
Good luck!
Hi all,
I bought a secondhand Asus Memopad HD 7 (ME173X), which turned out to be rooted, customized and unstable, so I am trying to restore it to what it was when it was sold.
I'm used to tinkering with computers but flashing tablets is not something I'm familiar with.
I tried to follow the instructions in post #5 of this thread, but I got the "brom error : s_security_sf_code_download_forbidden (6010) , msp erroe code : 0x00." error.
Searching the thread I found my question repeated in post #605, and answered in #615.
I am following this solution but I'm stuck at step 4: After connecting the tablet, Windows (7, 32-bits) (re?-)recognized the tablet during the download. At first, it was on COM4, now I have a duplicate entry on COM6: http://prntscr.com/andrqc (in Dutch). The progress bar in the flash tool was 100% but the timer kept going, but nothing happened further. So I had no alternative than to hit the [stop] button.
If I try to download it again, it simply doesn't seem to recognize the tablet when I connect it. I tried if I could boot it, but the tablet does nothing when I hit the power button.
help would be much appreciated
(Sorry for crossposting but on second thought, I think this subforum is perhaps more appropriate.)
Lspijkman said:
Hi all,
I bought a secondhand Asus Memopad HD 7 (ME173X), which turned out to be rooted, customized and unstable, so I am trying to restore it to what it was when it was sold.
I'm used to tinkering with computers but flashing tablets is not something I'm familiar with.
I tried to follow the instructions in post #5 of this thread, but I got the "brom error : s_security_sf_code_download_forbidden (6010) , msp erroe code : 0x00." error.
Searching the thread I found my question repeated in post #605, and answered in #615.
I am following this solution but I'm stuck at step 4: After connecting the tablet, Windows (7, 32-bits) (re?-)recognized the tablet during the download. At first, it was on COM4, now I have a duplicate entry on COM6: http://prntscr.com/andrqc (in Dutch). The progress bar in the flash tool was 100% but the timer kept going, but nothing happened further. So I had no alternative than to hit the [stop] button.
If I try to download it again, it simply doesn't seem to recognize the tablet when I connect it. I tried if I could boot it, but the tablet does nothing when I hit the power button.
help would be much appreciated
(Sorry for crossposting but on second thought, I think this subforum is perhaps more appropriate.)
Click to expand...
Click to collapse
Hello
You may try posting your query in the same thread you followed, the users with same issue maybe have a possible solution. Also the experts there maybe able to assist you.
-Vatsal
Hello guys,
A few months ago, I rooted my phone using kingroot. After a few weeks, i tried to install TWRP custom recover to unlock bootloader. I accidently downloaded a wrong version of it and flashed it using flashify app, after which i booted into recovery to check the new recover mode. But, something awkward happened. THE BOOT MODE DIDN'T OPEN AND THE SCREEN GOT STUCK AT "Booting into recovery". I read on the internet and realised that my device has got soft-bricked. Also, phone wasn't rebooting. So, i found a solution atleast start my phone. I took out my battery, pressed the buttons for download mode and then placed the battery back in and pressed the buttons for download mode and somewhow rebooted my phone (i read about this technique in xda forums). Now, although my phone works but i cannot access the recovery mode as it has got soft-bricked. Thus, i cannot perform a hard reset as it gets caught in that "recovery booting stuck cycle". So, can anyone tell me how to fix this? PLS QUICKLY. aLSO, i don't know much about ADB, so pls explain that too as my friend suggested me to use ADB to fix softbrick but im not sure!!
androcrazy24 said:
Hello guys,
A few months ago, I rooted my phone using kingroot. After a few weeks, i tried to install TWRP custom recover to unlock bootloader. I accidently downloaded a wrong version of it and flashed it using flashify app, after which i booted into recovery to check the new recover mode. But, something awkward happened. THE BOOT MODE DIDN'T OPEN AND THE SCREEN GOT STUCK AT "Booting into recovery". I read on the internet and realised that my device has got soft-bricked. Also, phone wasn't rebooting. So, i found a solution atleast start my phone. I took out my battery, pressed the buttons for download mode and then placed the battery back in and pressed the buttons for download mode and somewhow rebooted my phone (i read about this technique in xda forums). Now, although my phone works but i cannot access the recovery mode as it has got soft-bricked. Thus, i cannot perform a hard reset as it gets caught in that "recovery booting stuck cycle". So, can anyone tell me how to fix this? PLS QUICKLY. aLSO, i don't know much about ADB, so pls explain that too as my friend suggested me to use ADB to fix softbrick but im not sure!!
Click to expand...
Click to collapse
Hi androcrazy24
Thanks for using XDA Assist.
Could you please state the Manufacturer & Model of your device so we would better approach your issue guiding you to the appropriate experts? Your last post from November 2015 is referring to the S III. It is still that?
I will be waiting for your reply within the next 2 days.
Nice regards.
.
my phone is samsung galaxy s4 mini DUOS GT-I9192, OBVIOUSLY BY SAMSUNG..........
Kdio said:
Hi androcrazy24
Thanks for using XDA Assist.
Could you please state the Manufacturer & Model of your device so we would better approach your issue guiding you to the appropriate experts? Your last post from November 2015 is referring to the S III. It is still that?
I will be waiting for your reply within the next 2 days.
Nice regards.
.
Click to expand...
Click to collapse
"mY phone is samsung galaxy s4 mini duos GT-19192 RUNNING ANDROID 4.4.2
androcrazy24 said:
"mY phone is samsung galaxy s4 mini duos GT-19192 RUNNING ANDROID 4.4.2
Click to expand...
Click to collapse
Hi androcrazy24
Thank you for your answer
Our experts at the below forum should be able to help you. Please be welcome to ask in there.
Galaxy S 4 Mini Q&A, Help & Troubleshooting
Nice regards and good luck.
.