Hello everyone. first of all I must say that I am Italian, so I apologize if my English is not perfect. Now let me share with you my problem: I have among others a Htc8s for some time after the last updates the baby did not work very well so I decided to try a process to rewrite the Roma since I could not restore it with the hard reset , so I ran into the same process of user Deextaar "The phone is dead
Hello, on the phone I have got an error message where was written insert the install media and something about recovery. So I download the files and I flash it. But unfortunately when i Should push the volume buttons, camera and flash and power button was started I let go of the button and the flash did not finished and now the display is out, the phone will not turn on, flash mode do not working, and after connecting to the PC is displayed That is not working properly. Do you know what I should do? "
It seems incredible but like an idiot I made the same mistakes, and now I find myself with my HTC8S that no charge is not recognized by pc that flashes for a few seconds and sometimes vibrates. Know that you are two weeks I read the post and try different solutions but nothing I can not get it started. I hope you can help me get my jewel. Excuse me while I was down in my first post. In expectation of a prompt Response I greet you and thank you in advance
Hi, thank you for using XDA Assist. The best place to get help is in your device's specific forum here, http://forum.xda-developers.com/htc-8s They are the experts on your device.
Good luck!
Thread closed.
Related
Hi everyone, I'm sorry if I am posting at wrong place but I need your help !
Yesterday my Blu Studio 5.0s has frozen and I've tried for a hard reset, till there, ok !
but after hard reset my phone died !
YES, the phone do not start up, do not light up, can't put on recovery mode, don't charge, it's totally bricked
When I connect it to my computer recognizes the phone even drivers.
As if I can reset it to occupy it on fastboot mode and not turn
THAKNS
Hi!
I can't find any specific threads to help with a brick, but here's a general help thread for your device.
http://forum.xda-developers.com/showthread.php?t=2235153
Please post your issue in that thread, be very specific and try to make it easy to understand.
Good luck! ?
Hello everyone, first post for me here.
Some friends told me to come with my problem here saying it would be the best place to get help (that will be precious to me)...
I'm really noob on android devices, so please be patient with me.. lol. I apologize already if u dont get what i exactly try to explain with my words..
Here i come : I got a new Huawei G8 (very unpopular one, for my luck again..). I got it rooted a while ago, when i bought it (had to find the ONLY tutorial that was in portuguese and took hours to do it but i did it !)
I have on it installed TWRP.
Yesterday in the night, my phone asked me to update. So did i. What i didnt know is that it was not gonna boot on android again. So to be clear : everytime i try to set my device on, it goes straight on TWRP recovery tool or if i do specific move (power + volume up i think) that just send me to the "Fastboot & rescue mode", telling me to connect my device to my PC and open HiSuite (what will just not do anything cause HiSuite wont detect it). >> HiSuite wont detect it but i can open it and get files in or out of internal or external storage.
I already tried to flash a firmware i downloaded on Huawei's website but then it just says "zip file corrupt". I also noticed that in the zip file i downloaded was a tar.gz file.
I also downloaded from a link i found in a tutorial a .rar file with in it the dload and CUSTOM folders with .APP files. Then copied it on my SDcard and tried to turn my device on to make it auto update with these files (power + both volume buttons). The thing is i cant even make it boot like that cause when i try pushing both volume buttons + power button it instantly turn on and booting on TWRP ...
I'm so sorry I cant explain properly what i did but i hope you will understand what the problem is and maybe lead me to find the right procedure to get my phone back... I'm sure I missed a lot of important informations but just ask me and i'll answer with pleasure, ill just check this post every hour..
So if someone knows any way to get my phone working back, even if it means i will lose all my datas and start over, thats really not a big deal.
Thanks a lot if you people read this and try to help me..
Underscare753 said:
Hello everyone, first post for me here.
Some friends told me to come with my problem here saying it would be the best place to get help (that will be precious to me)...
I'm really noob on android devices, so please be patient with me.. lol. I apologize already if u dont get what i exactly try to explain with my words..
Here i come : I got a new Huawei G8 (very unpopular one, for my luck again..). I got it rooted a while ago, when i bought it (had to find the ONLY tutorial that was in portuguese and took hours to do it but i did it !)
I have on it installed TWRP.
Yesterday in the night, my phone asked me to update. So did i. What i didnt know is that it was not gonna boot on android again. So to be clear : everytime i try to set my device on, it goes straight on TWRP recovery tool or if i do specific move (power + volume up i think) that just send me to the "Fastboot & rescue mode", telling me to connect my device to my PC and open HiSuite (what will just not do anything cause HiSuite wont detect it). >> HiSuite wont detect it but i can open it and get files in or out of internal or external storage.
I already tried to flash a firmware i downloaded on Huawei's website but then it just says "zip file corrupt". I also noticed that in the zip file i downloaded was a tar.gz file.
I also downloaded from a link i found in a tutorial a .rar file with in it the dload and CUSTOM folders with .APP files. Then copied it on my SDcard and tried to turn my device on to make it auto update with these files (power + both volume buttons). The thing is i cant even make it boot like that cause when i try pushing both volume buttons + power button it instantly turn on and booting on TWRP ...
I'm so sorry I cant explain properly what i did but i hope you will understand what the problem is and maybe lead me to find the right procedure to get my phone back... I'm sure I missed a lot of important informations but just ask me and i'll answer with pleasure, ill just check this post every hour..
So if someone knows any way to get my phone working back, even if it means i will lose all my datas and start over, thats really not a big deal.
Thanks a lot if you people read this and try to help me..
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist
Hi, I was about to install myself a new rom and I probably badly cocked up.
well to make it short, I was following instructions here https://wiki.cyanogenmod.org/w/Install_CM_for_honami
and it went good, till I misunderstood one thing, that i need to get phone in fastboot and then navigate in PC cmd to boot.img, well I did, but I was so stupid (I realized moment later) that I had separated the boot.img file from rest of the stuff in cyanogenmod folder. And I booted it wia fastboob and rebooted my phone....
well... red light started and that was it...I have been waiting some time if something will happen but nothing.
then tried to start it, reset it, nothing helped...all the phone does is only the red led will start if I hold power and vol + and if I hold power and vol +- it vibrates once, and after moment it vibrates three times.
my phone is xperia Z1 as you can see from cyanogenmod wiki page -honami
so my question is simple... is there any way to fix this?
Iam rly disapointed it can be broken so easily just by one tim booting wrong file? I dont believe there is no way how to save it... but my PC doesnt recognize the device anymore so I cant fix it or dont know how...
pls help
Hello and thank you for using XDA Assist,
please create an account and ask your question here:
Xperia Z1 Q&A, Help & Troubleshooting
The experts in your device Q&A forum should be able to help you.
Kind regards
Trafalgar Square
XDA Assist
Hello. I'll try to explain my problem because I really need some help.
A few days ago, I was normally using my Tablet ECS TR10RS1 Intel®.... I turned it off, went to sleep and the next day when I was going to use it again, the OS didn't start, so I tried and tried until I found a forum where they led me to restore a backup file because the original firmware/rom wasn't still available.... publicly. I tried that, but in the process, I accessed the EFI Shell... That wasn't trouble at all, I just plugged the keyboard and typed "exit", and then it let me to the BIOS... And that's when my real problem began: I restored the factory setting default... and it involves "disabling USB ports".... Now, AGAIN, I'm stuck on EFI Shell. But this time, I can not type "exit" since the keyboard is not recognized by the Tablet.
Then I pressed Vol UP + Power ON and I get access to another menu "DNX".... And that's what brings me here to your forum:
I was briefly reading that one of your members managed to flash the BIOS via DNX, so I was wondering if you guys could help me do that to my tablet because I'm not planning to have a really expensive paper holder.
Thanks in advance.
Jinky.
OreoFudge said:
Hello. I'll try to explain my problem because I really need some help.
A few days ago, I was normally using my Tablet ECS TR10RS1 Intel®.... I turned it off, went to sleep and the next day when I was going to use it again, the OS didn't start, so I tried and tried until I found a forum where they led me to restore a backup file because the original firmware/rom wasn't still available.... publicly. I tried that, but in the process, I accessed the EFI Shell... That wasn't trouble at all, I just plugged the keyboard and typed "exit", and then it let me to the BIOS... And that's when my real problem began: I restored the factory setting default... and it involves "disabling USB ports".... Now, AGAIN, I'm stuck on EFI Shell. But this time, I can not type "exit" since the keyboard is not recognized by the Tablet.
Then I pressed Vol UP + Power ON and I get access to another menu "DNX".... And that's what brings me here to your forum:
I was briefly reading that one of your members managed to flash the BIOS via DNX, so I was wondering if you guys could help me do that to my tablet because I'm not planning to have a really expensive paper holder.
Thanks in advance.
Jinky.
Click to expand...
Click to collapse
Hi Jinky
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards.
.
Hi there,
I am completely new here and first I want to say hello to everybody.
I have no idea if the thread, I created is at the right place so I apologize for any inconvenience and appreciate your help.
After trying to update my new DOOGEE BL7000 to the newest version of Android I am stuck in a boot loop. My BL7000 says that it can't be trusted any longer (Orange starte) and reboots after five seconds in a loop that I did not manage to stop. All keys being pressed in any combination for short and for long do have any effect. More, I am very lucky to having my smartphone got switched off.
The connection to Windows is established for about one second before the reboot starts what is far too short for doing any controlled activities.
Does anybody have an idea of what I can do or is this device definitely bricked?
Thanks for your highly appreciated assistance. I am looking forward to hearing from you soon.
Best,
Rainer
GMCSierra2003 said:
Hi there, I am completely new here and first I want to say hello to everybody. I have no idea if the thread, I created is at the right place so I apologize for any inconvenience and appreciate your help. After trying to update my new DOOGEE BL7000 to the newest version of Android I am stuck in a boot loop. My BL7000 says that it can't be trusted any longer (Orange starte) and reboots after five seconds in a loop that I did not manage to stop. All keys being pressed in any combination for short and for long do have any effect. More, I am very lucky to having my smartphone got switched off...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following thread.
https://forum.xda-developers.com/showthread.php?t=3689088
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Thanks, Ibuprophen.
I posted the question within the mentioned thread.
Let's see what happens.