Hi everyone, I'm sorry if I am posting at wrong place but I need your help !
Yesterday my Blu Studio 5.0s has frozen and I've tried for a hard reset, till there, ok !
but after hard reset my phone died !
YES, the phone do not start up, do not light up, can't put on recovery mode, don't charge, it's totally bricked
When I connect it to my computer recognizes the phone even drivers.
As if I can reset it to occupy it on fastboot mode and not turn
THAKNS
Hi!
I can't find any specific threads to help with a brick, but here's a general help thread for your device.
http://forum.xda-developers.com/showthread.php?t=2235153
Please post your issue in that thread, be very specific and try to make it easy to understand.
Good luck! ?
Related
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Thanks in advance.......
Hi,
I can't find a relevant thread on XDA for your issue, so you'll need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
Hello everyone. first of all I must say that I am Italian, so I apologize if my English is not perfect. Now let me share with you my problem: I have among others a Htc8s for some time after the last updates the baby did not work very well so I decided to try a process to rewrite the Roma since I could not restore it with the hard reset , so I ran into the same process of user Deextaar "The phone is dead
Hello, on the phone I have got an error message where was written insert the install media and something about recovery. So I download the files and I flash it. But unfortunately when i Should push the volume buttons, camera and flash and power button was started I let go of the button and the flash did not finished and now the display is out, the phone will not turn on, flash mode do not working, and after connecting to the PC is displayed That is not working properly. Do you know what I should do? "
It seems incredible but like an idiot I made the same mistakes, and now I find myself with my HTC8S that no charge is not recognized by pc that flashes for a few seconds and sometimes vibrates. Know that you are two weeks I read the post and try different solutions but nothing I can not get it started. I hope you can help me get my jewel. Excuse me while I was down in my first post. In expectation of a prompt Response I greet you and thank you in advance
Hi, thank you for using XDA Assist. The best place to get help is in your device's specific forum here, http://forum.xda-developers.com/htc-8s They are the experts on your device.
Good luck!
Thread closed.
So I flashed a img file on my phone using flashify and rebooted it. It since will not turn on at all. I have tried putting it into recovery mode and removing the battery. When I connect my phone to my computer it is recognized as a removable disk with the only two files being image and verinfo. I dont know how to turn my phone back on. Pls help thanks.
Hello,
Welcome to XDA.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/lg-g3/help
The experts there may be able to help.
Hi, today i tried to hard reset mi S6, and i think is a clone, i tried to hard reset, but, i get stuck in the android logo and down appears (Nincs parancs.) I tried to push power button, to reboot the device, but he don't do anyting !!! Is any method to flash my phone with a USB cable connected to my pc??? Or anyting, to flash my device!!
I don't speack inglish very good, im spanish!
Hi
You can ask in the forum linked below, providing as much info as possible so that you can get help
http://forum.xda-developers.com/android/help
Good luck
hey all,
So i have an android phone, Umi London.
my father used it for a while and then something happened.. after a while of trying to understand with him what happened (he doesn't know English very well, and he pressed the power button with the volume…and then he continued..)
i think that he deleted everything in the phone including the OS...
so this is the case:
the phone wont power on..
with charger, without charger, i changed the battery nothing.
tried to use hard reset, soft reset... nothing..
but i plug it in the computer and no responded from the phone... But the computer is making noise that something is plugged-in..
i cant find nothing.. on the device manager... but it making a sound of something connected.. and after 1-2 minute it disconnect..
and then repeat....
i also tried to see if maybe ADB will recognize him... (adb devices) but no luck.
So. if there is a solution.. only you guys can help me.
plz help.
im using windows 10, and all the drivers are updated (used it to change firmware and os for OnePlus1 ).
thank you in advanced, hagay.
Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!