Database Info

[Q] Invalid IMEI after factory reset?

Guys,
I have used many custom ROMs on A110,
But one day while I was running Cynus T2 ROM, my battery got discharged fully, I plugged into a wall charger but nothing happened even after hours of charging,
Then I searched on forums and flashed my phone by SPflasher , the flashing was successful but my IMEI got invalid, luckily i had nandroid backup
Now the problem is whenever I factory reset my IMEI gets invalid
So please help me.

mohsin.jmi said:
Guys,
I have used many custom ROMs on A110,
But one day while I was running Cynus T2 ROM, my battery got discharged fully, I plugged into a wall charger but nothing happened even after hours of charging,
Then I searched on forums and flashed my phone by SPflasher , the flashing was successful but my IMEI got invalid, luckily i had nandroid backup
Now the problem is whenever I factory reset my IMEI gets invalid
So please help me.
Click to expand...
Click to collapse
Restore your phone by getting in to CWM recovery. It should get back your IMEI data back. And then, once you can see both of your sim slots working, take a backup (NANDROID or just IMEI). You can use MobileUncle Tool to backup your working valid IMEI. Save and keep this file handy with you for future.

no success
rajenpurohit said:
Restore your phone by getting in to CWM recovery. It should get back your IMEI data back. And then, once you can see both of your sim slots working, take a backup (NANDROID or just IMEI). You can use MobileUncle Tool to backup your working valid IMEI. Save and keep this file handy with you for future.
Click to expand...
Click to collapse
even i get the same issue but now 1 more issue comes up .....
MOBILEUNCLE TOOLS WONT INSTALL AND I DIDNT TAKE A BACKUP >>>>>>
WHAT DO I DO NOW BRO ??????

invalid imei after reseting the phone
Sir ,please help me in getting back my imei data. When I reset my phone, it appears invalid imei and none of my sim is working . So plx help me

hasnain.kazmi said:
Sir ,please help me in getting back my imei data. When I reset my phone, it appears invalid imei and none of my sim is working . So plx help me
Click to expand...
Click to collapse
through eng mode u can solve the problem u just search in google

[Q] How to fix hard brick Titanium S5

After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:

NafeesTyagi said:
After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:
Click to expand...
Click to collapse
this might help u
http://forum.xda-developers.com/showthread.php?t=2459150&page=2

Help me in recovering the device.... using qpst tool.. just like karbonn a9+
i mean with MPRG8X25.hex and 8X25_msimage.mbn ,files to recover the phone

this might work
try going into recovery mode ... do a clean flash..

NafeesTyagi said:
After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:
Click to expand...
Click to collapse
The case was with me when I flashed android Honeycomb on it. I Hard-bricked it! ( Not even showing reaction when connected to charger ) ( nor booting )
I submitted my phone to Service centre and they said it would take at least 2 months. But I got my repaired phone on the 10th day!
For your problem the only best solution is Service center...

You can get firmware version and download tools from this website http://support.moulnisky.com/index.php?dir=Karbonn/S5_Titanium/

i changed my phone
but thanx manav113

Bad luck I presume..
Sent from my A15 using XDA Premium 4 mobile app

Titanium S1
NafeesTyagi said:
After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:
Click to expand...
Click to collapse
Hey you said that u found some tool for karbonn s1, can u tell us what is this tool? I know a tool called Acronis True Image but it requires backup image of the sys_boot partition. That means someone who has working S1/S5 has to take back up of recovery partition(sector by sector) using Acronis True Image and upload it here on xda or somewhere else and we can use that back up with the same tool. Please let me know if u have solution

Ya!
my karbonn smartphone was only responding to qpst tool (qualcomm products supporting tool)
I encountered with it while I was googling to revive my hard brick phone.
even phone was neither charging nor booting but responding to qpst.
If you want qpst tool I can send you by mail
But I don't have any backup of firmware files.
I think you should talk to zeyaan or deepa2119 they may help you probably they have back up

NafeesTyagi said:
Ya!
my karbonn smartphone was only responding to qpst tool (qualcomm products supporting tool)
I encountered with it while I was googling to revive my hard brick phone.
even phone was neither charging nor booting but responding to qpst.
If you want qpst tool I can send you by mail
But I don't have any backup of firmware files.
I think you should talk to zeyaan or deepa2119 they may help you probably they have back up
Click to expand...
Click to collapse
HeyI have the 2.7 build 411 but my phone (LG G3 Qualcomm 400 MSM8926) doesnt appear on the selection menu or is detected by the program. Would you have a newer version?

[Completed] Asus zenfone go (z00vd) nvram.bin ???

Hi guys .. can you share the backup NVRAM.bin of your phone 'cuz i have a problem of my unit my phone detects a sim name of our carrier but it says NO SERVICE, both sims, in Wifi also it can detect wifi networks but can't connect, also in bluetooth, i always refresh it to scan but cannot found nearby devices, and also when i used the wifi-hotspot to activate the Shareit apk but it says restart hotspot, it keeps restarting .. i think the NVRAM has been damaged
last time i've remembered, this phone was deadboot and i flashed the firmware through SP Flash Tool .. i've used FORMAT ALL + DOWNLOAD option, it's working now but i cannot use the wireless connections .. when i checked the scatter firmware, there is no nvram.bin on the folder
someone else here who has a good heart to share his NVRAM or full backup rom ?? much better if its already flashable
i hope you would help me out

XDA Visitor said:
Hi guys .. can you share the backup NVRAM.bin of your phone 'cuz i have a problem of my unit my phone detects a sim name of our carrier but it says NO SERVICE, both sims, in Wifi also it can detect wifi networks but can't connect, also in bluetooth, i always refresh it to scan but cannot found nearby devices, and also when i used the wifi-hotspot to activate the Shareit apk but it says restart hotspot, it keeps restarting .. i think the NVRAM has been damaged
last time i've remembered, this phone was deadboot and i flashed the firmware through SP Flash Tool .. i've used FORMAT ALL + DOWNLOAD option, it's working now but i cannot use the wireless connections .. when i checked the scatter firmware, there is no nvram.bin on the folder
someone else here who has a good heart to share his NVRAM or full backup rom ?? much better if its already flashable
i hope you would help me out
Click to expand...
Click to collapse
Hi,
There's no dedicated forum for your device here in XDA.
Kindly register yourself at XDA post which you can query in Android Q&A,Help and Troubleshooting.
Experts there may be able to help you

[Guide]Backup your IMEI/MEID on ZTE Nubia Z9 Max

What is IMEI/MEID?
IMEI is the unique 17 or 15 digit code used to identify an individual mobile station to a GSM or UMTS network, without proper IMEI, you'll not be able to receive OTA update in some phone like LG G4.
Similarly, MEID is a globally unique number identifying a physical piece of mobile station equipment.
Anyway, this is your NV Data, if you lost your NV Data, your android device might not work as a phone anymore.
How to backup your IMEI/MEID on ZTE Nubia Z9 Max?
So here is a simple guide on how to backup your IMEI/MEID on ZTE Nubia Z9 Max, in case you accidentally brick your device and need to restore.
So let's see what we need first:
1. Your phone running stock ROM,a PC and a Micro-usb cable
2. QPST v2.7 Build 4.11 or newer
Now get the backup:
1. Connect your phone to PC
2. Bring up your dial pad, dial *#7678#, you'll see something like this, check "Factory Port"
3. Now open QPST configuration, you should be able to see your phone
4.Select "Start Clients"-"QPST Software Download" from QPST Config UI,
5.Select "Backup" from QPST Software Download, press "Start' and you'll get your backup in the "bin" folder of QPST
6.If you ever need to restore from backup, just do 1 to 4 again, and Select "Restore" from QPST Software Download, get your backup and hit Start
this might take a while and your phone will reboot when it's done.DO NOT UNPLUG WHEN RESTORING.
That's all, enjoy your phone.

Repair imei
Hi i lost my imei, i not follow the adequate post and i backup my imei with twrp with the image efs and well this not restoring my imei. But i find a archive nv.qcn of a nubia z9 max, and im thinking to edit the qcn with my imeis and meid and send to my phone but, could this work?. Also my phone is blocked, and i not know how to unlock, This codes works? https://www.safeunlockcode.com/zte/unlock-nubia-z9-max, http://zteunlockcode.blogspot.cl/2015/12/zte-nubia-z9-max-unlocking-code.html?m=1 .
I have a soft brick in my nubia z9 max nx510j of CN Telecom for install another rom that's not of telecom but, when i restore to a telecom rom with nubia emergency tool, this tool change my imei to one of test, and I can't receive signal of 4g, 3g etc.
Please help.

I just wanted to say that there's a sticker with the IMEI/MEID behind the back of the phone, in case you REALLY need it. But be careful removing it, mine broke

help the program says that have a port connected but without phone

[CLOSED] Samsung SM-B350e (Unbrick-Imei Repair***NO NEED PATCH CERT) Guide

Hi
Tonight i have worked on Sm-b350e keypad phone and unbricked it and do imei repair
This phone have two type of soc
Sc6551c and sc8501c
Phone Stucked on logo and reboot after flash because all file flashe stored in internet and supports are for sc8501c
and download mode not work(PC cant set connection for flashing)
i found a way to unbrick it without problem & Imei Repair It with signal(Im Sure First in the world)
----
Only firmware of sc8501c is available in the froums and box supports
Many of thia device bricked by flashing this firmwares.
----
Z3x:
repair imei but cant patch cert
can flash. tar.md5 in download mode
but after phone bricked it cant unbrick
----
octopus box
cant repair imei
can't flash in download mode
but
It can unbrick using spd port
----
i have flashed this phone by z3x then phons goes bootloop and no tool can flash it in download mode then i unbricked it using octopus.
but the way to unbrick is not the ways that other says in froums.
-----------------
Tools we need to unbrick & imei repait
-Resarch download tool
-Nv backup
-octopus box
-z3x tool
-SM-B360 Pac File firmware
****In this method you don't need patch cert every imei you type even 000000............ phone will give you service****
----------
Steps to Unbrick
1-Run Research Download Tool
2-Select Firmware (B360-sc8501c_Samsung_Yucca_CIS.pac)
3-Remove Battery-Hold Button 1 + Connect Usb-insert Battery flash it
4-Run Octopus box
5-Flash(SM-B350E.oct) by ddilshod93
6-Remove Battery-Hold Button 1 + Connect Usb-insert Battery
------------------------------Do Step7 If phone Not bootup
7-Restore Nv Backup(IF You Have Backup From your NV Restore it)(If dont have it Restore This NV Backup)
***Done Phone Should Start Normal****
----------------------------------------------------
STEPS To Repair imei
You Have 2 Option
For Repair Imei In Z3x You should Select FlashMode CheckButton In Repair Section and Remove Battery-hold 1 Button + Insert Cable and Then Insert Battery
Option1:
1-Run z3x
2-Select B360 Device
3-Download Imei Repair Files(SM-B350e imei repair by z3x(dashti.95)xda)extract it
4-Select FDL1-FDL2-NVitem
5-Remove Battery-Hold Button 1 + Connect Usb-insert Battery
Now Device Imei Gone 0000000000000000
6-Select B350 in z3x
7-Repair Imei and No Need Patch Cert-If No Service Then Patch Cert(But It Dont Need)
Done And Imei Repaired
----------------
Option2:
1-Run Octopus
2-Write NV (this NV)
3-Run Z3x
4-Imei Repair and Done No need Patch Cert
--------------------
Hope I Have Fixed Your Problem Please Like it
and You Can Have Access To my Repo For this model Files on Mega (Here You Are)
----------
GOOD LUCK