Hi
Tonight i have worked on Sm-b350e keypad phone and unbricked it and do imei repair
This phone have two type of soc
Sc6551c and sc8501c
Phone Stucked on logo and reboot after flash because all file flashe stored in internet and supports are for sc8501c
and download mode not work(PC cant set connection for flashing)
i found a way to unbrick it without problem & Imei Repair It with signal(Im Sure First in the world)
----
Only firmware of sc8501c is available in the froums and box supports
Many of thia device bricked by flashing this firmwares.
----
Z3x:
repair imei but cant patch cert
can flash. tar.md5 in download mode
but after phone bricked it cant unbrick
----
octopus box
cant repair imei
can't flash in download mode
but
It can unbrick using spd port
----
i have flashed this phone by z3x then phons goes bootloop and no tool can flash it in download mode then i unbricked it using octopus.
but the way to unbrick is not the ways that other says in froums.
-----------------
Tools we need to unbrick & imei repait
-Resarch download tool
-Nv backup
-octopus box
-z3x tool
-SM-B360 Pac File firmware
****In this method you don't need patch cert every imei you type even 000000............ phone will give you service****
----------
Steps to Unbrick
1-Run Research Download Tool
2-Select Firmware (B360-sc8501c_Samsung_Yucca_CIS.pac)
3-Remove Battery-Hold Button 1 + Connect Usb-insert Battery flash it
4-Run Octopus box
5-Flash(SM-B350E.oct) by ddilshod93
6-Remove Battery-Hold Button 1 + Connect Usb-insert Battery
------------------------------Do Step7 If phone Not bootup
7-Restore Nv Backup(IF You Have Backup From your NV Restore it)(If dont have it Restore This NV Backup)
***Done Phone Should Start Normal****
----------------------------------------------------
STEPS To Repair imei
You Have 2 Option
For Repair Imei In Z3x You should Select FlashMode CheckButton In Repair Section and Remove Battery-hold 1 Button + Insert Cable and Then Insert Battery
Option1:
1-Run z3x
2-Select B360 Device
3-Download Imei Repair Files(SM-B350e imei repair by z3x(dashti.95)xda)extract it
4-Select FDL1-FDL2-NVitem
5-Remove Battery-Hold Button 1 + Connect Usb-insert Battery
Now Device Imei Gone 0000000000000000
6-Select B350 in z3x
7-Repair Imei and No Need Patch Cert-If No Service Then Patch Cert(But It Dont Need)
Done And Imei Repaired
----------------
Option2:
1-Run Octopus
2-Write NV (this NV)
3-Run Z3x
4-Imei Repair and Done No need Patch Cert
--------------------
Hope I Have Fixed Your Problem Please Like it
and You Can Have Access To my Repo For this model Files on Mega (Here You Are)
----------
GOOD LUCK
Related
hello i need help ... after i ported to ics on my p920... i ve lost my signals and msg says no sim inserted or no service.... i downgraded it to GB still no solution... i restored my imei... changed couple of basebands..did a hard reset...flashed roms by lgtool and KDZ method,,but no way out ...how can i bring my phone s signals back ..please do reply...
Seems like your imei is deleted
Try restoring it by using this method http://forum.xda-developers.com/showthread.php?t=1734330
Sent from my LG-SU760 using xda app-developers app
fix for u
follow same even if ur phone is bricked.
1) Download LG support tool.
2) download latest LG usb drivers.
3) open LG support tool, now remove ur phone battery and hold vol+ and than connet the phone.
4) when LG support tool shows phone connect.
5)click on customer and support>recovery in menu bar of lg support tools
6)enter ur IMEI number and press check, than dialog box will appear press ok.
7)than ur update will start , when it is completed you will see ur imei is back.!!!
8) Last step is to go in recovery mode(remove battery, put it back,press vol - and power and 3D key at same time. and wen lg logo appers release power key) and reset your phone, wipe cache, wipe cache and package.
AND if ur imei is diffrent Than
use the steps of only "restoring imei" in the following link
http://forum.xda-developers.com/showthread.php?t=1734330
in the link mentioned above use only the steps for "restoring the imei". dont follow the CP kz flash steps.
sorry for bad english.
if helpful hit thanks button.
Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number
Issue resolved, thread closed, thanks.
Hi everyone, to restore my UMI Iron from a malware that ask every time after boot for privacy password had to flash the phone with sp tool, the device is back but lost my 2 imei.
On umi forum warned me that i would missed the 2 imei, and that should use to restore SN WRITE tool.
I follow the guide step by step but always end in error.
I think was because Iron device do not enter in Meta Mode, but i follow the same way to flash a new rom with SPFT: remove battery cable, wait to recognize it and plug it again,
but it seem's not working.
If i tried with battery off (same as to flash the rom with SPFT) seems to not recognize the mobile and report a time response error.
If tried with to connect the power off phone with battery plug in, report other different 2 error:
First - ERROR!! Prod_Info : Metaresult = SPMETA_DLL::META_LID_INVALID
Second - EnterAPMode[] : MetaResult =
SPMETA_DLL:;META_MAUI_DB_INCONSISTENT
I tried to restore my 2 original imei from box sticker.
Hi,
Thanks for writing to us at XDA Assist.
There is no forum for this device but you may try aksing in the following dedicated thread: http://forum.xda-developers.com/android/general/umi-iron-unibody-alloy-dual-led-t3127905
Good luck!
New Phone tool 1.0
Update 1.1 fix bug efs backup android 6.0 after close tool and open again no see backup list
Hot Update 1.2
support Backup and restore devices root key (DRK) for all samsung phone use it
Phone tool can help you backup & Retore EFS from Phone
EFS Include IMEI, Serial Number(SN) Device root key (DRK).......
Phone tool can help you backup & Retore more pratition NVM from Chip qualcom of samsung phone
Phone tool can help you Fix error Wifi cant open and no memory pass world for samsung phone only one click
Phone tool can help you active all hidden language for Samsung, LG, HTC
Devices need root
If u work good this tool , Rate for me
Link CHplay
https://play.google.com/store/apps/details?id=lttem.backupsimei
How to backup restore efs
Tool support all samsung phone
Auto detect type MCU and backup
PHone tool 1.2 Update fist in the world backup restor DRK for samsung phone
Where is phone tool sir, please provide download link. I restored efs through efs tool, Micromax canvas evok E483, android 5.1.1, imei OK, but unable to register in network. Sim OK.
At me too after certain manipulations with phone the erase settings Modemst1 and Modemst2 , this two files deleted in my phone. I flash fastboot rom via EDL mode + add modemst1.img, modemst2.img in partition.xml + rawprogram5.xml and they flash in my phone. I've lost imei + meid + esn + baseband unknown. I flash my backup qcn file made by qpst 2.7.472, imei + meid + esn + baseband all shows well and correct, but now the phone has stopped catching mobile networks at all, just burn the gray sticks with a cross. Help me please model Mi Mix 2s M1803D5XA ! Need Solution how to raise mobile networks after recovering from the qcn file made by qpst 2.7.272 from the same phone when everything worked in this phone. Thank all who answer me!!!!
Could you solve it?