Spent nearly two weeks scouring the internet for a P6200/P6210 digitizer screen replacement tutorial with no luck. The farthest I've gotten is opening the back case and I've so far found this thread, which suggests but doesn't go into detail:
http://forum.xda-developers.com/galaxy-tab-plus/general/broken-glass-screen-t3008793
Can anybody help?
it appears from the link you attached that the digitizer glass is glued to the LCD.
Related
Hi all,
Sadly my desire s got wet and the screen has very bad water marks in the display. I have attempted various methods to attempt to dry over the last three weeks with no luck.
My question is does any know a reputable supplier for a replacement screen, I don't trust the eBay ones.
Thanks in advance.
Apologies, just spotted an existing thread, answer. /doh
Dear All,
I was having a very wonderful time with my desire S untill recently when something went bad with my saga that the right edge of the touchscreen did not respond. After a few days, the left edge stopped responding as well.
I searched XDA and googled for the problem and I came to know that replacing digitizer helps. My LCD is very much fine and I'm hopeful replacing just the digitizer will help. I've ordered one from Amazon and I'll be performing the replacement myself, referring youtube videos.
Could anyone please share their experience on replacement of digitizer or problems similar to me?
Thanks.
I did that a while ago... Though i had a cracked digitizer instead od an unresponsive one... You should be fine with the video guides. Some of the parts (like the camera cover) will put some resistance though. You'll also need to be careful with the screen as it is glued to the frame. If you will, you should be able to reuse it and watch out for the cable
Sent from my Desire S using xda premium
It's a fairly easy procedure and I have done it on a couple of DSs before.
Just do yourself a favour - take it slowly and follow the instructions closely. Especially when it comes to heating the old tape to separate the digitiser and the LCD - if you try to force it off at all you run a very real risk of cracking the LCD as it's a fragile bit of kit.
Hey all,
Client brought in a TF300T with a cracked digitizer, good LCD, but no touch response. Changed digitizer, everything works but touch. Original digitizer has no "G0_" number on it, but replacement is a G01.
Because the digitizer wasn't working in the first place, would this be a bad digitizer PCB? I've been searching forums for the past hour but haven't found any fixes for this particular scenario. Attached are images of the digitizers.
Thanks!
Can anyone please help me find a replacement screen on my AT&T phone? every screen I find is a 15-28 day shipping date, and the only one I found that ships reasonably, the cable that connects so the touch screen works, it didn't fit my phone. anyone please help!!!
bought mine on ebay, it works but I'm having issues due to the nature of the install I had to re-use the mounting from the old screen and the old adhesive was so hard to get off and the new adhesive I bought on amazon wasn't sticky enough and when I tried to reset the mount the glass separated from the digitizer slightly! ugh.....
might I suggest reading this post - http://forum.xda-developers.com/showthread.php?t=2164760
and buying your screen from this site - http://www.etradesupply.com/oem-htc...t-housing-and-light-guide-with-at-t-logo.html
should be in stock...
Hi,
Can anyone tell me where I can buy a new complete digitizer screen? Not just the glass, as I have bought the glass not realizing I need the digitizer itself as they can't be split without damaging the digitizer itself as its glued to glass screen and they can't separated.
Thanks
Can anyone tell me how to even begin opening this up? whatguide do you follow for that please
aliexpress.com
aliexpress.com
I found HTC One ME LCD here
Although there are out of stock right now except they will become available next days as they say.
brapa.com/HTC-One-ME-(ME9-M9et-M9ew-Hima-Ace)-LCD-Display-Touchscreen-ditizer-scherm-glasplaat-fronje-unit
Good luck