This thread is no longer updated, use this link instead: https://forum.xda-developers.com/gear-s3/themes/fitness-apps-speed-pace-heart-rate-t3709791/
This app is similar to Always-On Speed, but instead of speed it shows pace, which is more useful for runners. Here is the full description:
This application shows time and your pace while keeping the device awake. It does not log your activity. Please read the information below before using the app.
Make sure that GPS is enabled before starting the app. In order to turn on GPS, start or start and stop a workout in the S Health app or enable GPS manually on your smartphone.
• The app cannot enable GPS on your phone automatically.
• The app is only as accurate as your phone's GPS.
• Touch the speed indicator three times at an interval of at least one second to change the unit of pace (min/km → min/mi). The app will remember your choice next time you launch it.
There are several features that reduce power consumption (currently at ~17% per hour):
• The rotating bezel on the Gear S2 can be used to adjust the screen brightness. Note: in bright sunlight the brightness level locks at 100% and cannot be adjusted.
• Only one type of subpixels is used at a time, either red, green or blue.
• As soon as you stop moving, the device will start vibrating every 10 seconds. The app will close automatically after 1.5 to 3 minutes of inactivity.
Features that prevent screen burn-in:
• Numbers move up and down the screen.
• Tap the time indicator to change the font color from green to alternating red and blue. Note: red or blue text has very poor readability in bright sunlight.
• Font size changes.
Please "like", rate, comment!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Updated the app to show the average pace calculated for the last 60 seconds.
Related
I started development for this app longer than a year ago, now I'm releasing it. I learned a lot during development. The app is about counting down (or up) to any date. It can count in any unit (from seconds to years) and I really tried to create an elegant UI. I also created a small promotional video (note that the video doesn't show all the qualities of the app).
I already have several features in mind for future releases.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would be very grateful if you downloaded it and gave it a try.
Google Play Description
Time Until: App & Widget
This app is an elegant and stylish way to count down to any date in the future. Set a timer or see how many seconds, minutes, hours, days, working days, weeks, months or years are left until an event that is important to you. Create as many countdowns as you want, and count down to any special date, like Christmas, a trip, a vacation or even the next Halley's Comet appearance. Select any image to set as a discreet blurred background for each countdown, or leave the default phasing colors background. And share the countdowns you create!
You can also set a past event and count the time since (just check "Time Since" in the settings to activate the function). For example, see for how many seconds you have been alive! The app interface is simple and intuitive, and in Kit Kat (4.4) and later, you can enter immersive mode by double tapping and the countdowns will take up the whole screen.
Add the beautiful and dynamic widget to your homescreen to have a subtle reminder of the time until (or since) a date. You can select from two styles: dark and clear. Each suitable for a personal taste or home screen background. You can also customize units for the widget. Widget and main app countdowns are independent for maximum customizability.
The app is completely free and has no restrictions, enjoy!
Expect future updates with new features and suggest any you want.
If you liked the app, please rate.
Permissions:
The read the contents of USB storage permission is to read the images for backgrounds.
The network permissions are to display ads and keep the app free.
As a new user, right now I can't insert links, the link is in the youtube video description, or try searching for Time Until or "Bruno Schalch" in the play store.
Hello XDA folks,
I present to you CF.lumen PRO [root] Android App.
It is a interesting app which can change the colors of your screen with the position of sun in the sky. When using CF.lumen PRO with default setting your display will have a warmer tint (liek lower color temperature) when the sun is down. This reduces the stain effect on the eyes. Blue light actually push your brain to stay awake and a lower color temperature dims the effect of blue color on the screen. It also reduces the effort that a human brain have to make in order to stay awake in the night time. Other than this there are many other things as well which include filtering of red light during the sleeping hours, light sensor and much more.
Features -
· Light sensor
The light sensor can be used to automagically adjust the color: switch to the sleep filter in full dark, or to the day filter (usually none) under bright lights.
Because light sensor quality varies wildly between devices, a calibration option is provided to experiment with.
· Color filters
Several filters are provided. Those named after a color (red, green, blue, amber, salmon) do not limit the display to those colors, but convert the displayed image to grayscale first, then display that image in levels of the selected color. This preserves details that would otherwise be lost.
Grayscale, invert colors, temperature adjustment and custom R/G/B adjustment filters are also provided.
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download From Google Play : Here/B]
What’s New:
Nouveautés
v2.74
- Fix some remote control issues
v2.72
- Fix issue with in-app purchases
v2.71
- Hide notification from (secure) lockscreens on L
- Check free space before installing driver
v2.70
- Tasker integration (Pro only)
v2.66
- Android 5.0 fixes
- 64-bit fixes
- Performance improvement
v2.61
- Fix UI bug where settings wouldn't open sometimes
This is not your app - and it's already posted here - http://forum.xda-developers.com/showthread.php?t=2711912
Closing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download link:
https://play.google.com/store/apps/details?id=com.rom4eg.light.militarystrobe
Rapidly flashing light (strobe) is used by many intelligence agencies around the world. Rapidly flashing light does not allow eyes to focus, which causes instant blindness.
You can find more details about the mechanism of the strobe on the Internet.
Usually strobe light is using to blind the enemy, or to reach the trance state (during the interrogation or hypnosis + specific strobe lights in night clubs).
WARNING! Fast blinking light causes epileptic seizures in 10% of accidents.
This app is created for the self-defense purposes .
After downloading the blinding flashlight you can always feel safe in the dark.
In addition to blinking available normal flashlight. Flash frequency is easily adjusted. The maximum blinding rate (16 Hz) - the most effective and immediate blindness, available only after purchasing the application.
The strength of the blinding also depends on the flashlight power on your device.
iPrice said:
Download link:
https://play.google.com/store/apps/details?id=com.rom4eg.light.militarystrobe
Rapidly flashing light (strobe) is used by many intelligence agencies around the world. Rapidly flashing light does not allow eyes to focus, which causes instant blindness.
You can find more details about the mechanism of the strobe on the Internet.
Usually strobe light is using to blind the enemy, or to reach the trance state (during the interrogation or hypnosis + specific strobe lights in night clubs).
WARNING! Fast blinking light causes epileptic seizures in 10% of accidents.
This app is created for the self-defense purposes .
After downloading the blinding flashlight you can always feel safe in the dark.
In addition to blinking available normal flashlight. Flash frequency is easily adjusted. The maximum blinding rate (16 Hz) - the most effective and immediate blindness, available only after purchasing the application.
The strength of the blinding also depends on the flashlight power on your device.
Click to expand...
Click to collapse
Sounds dangerous. ..............me like it lol
G-NetFace uses neural network for face recognition. You can compare two faces or select face and search folder with images for face match.
App on Google Playstore - https://play.google.com/store/apps/details?id=com.gyokovsolutions.gnetface
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
COMPARE FACES:
Load two images and calculate similarity between faces. If an image contains several faces you can select which one to use for comparison.
How to use:
1. Load face 1 image.
2. Load face 2 image.
3. Press COMPARE FACES - similarity between faces is calculated. You can also see chart of the 128 face embeddings that neural network produces.
FOLDER SEARCH:
Load face image and search matching face in a folder of images.
How to use:
1. Load face image.
2. Select folder with images to be searched.
3. Press START - the selected face is compared with faces in images in selected folder and the results with similarity bigger than defined threshold in settings are shown.
Settings:
- Folder search threshold - defines threshold which results to appear in FOLDER SEARCH. Faces with similarity bigger than this threshold will be shown.
- Face detection area shrink percentage - control the size of the area around the face. Setting positive values will shrink the area and negative values will expand it.
- Face detection area lowering percentage - control the height of the area around the face. Setting positive values will lower the area around face and negative values will lift the area.
- Always align faces - when this is checked the faces will be automatically aligned. This will improve the results, but will slow the process.
By adjusting Face detection area shrink and lowering percentage you can control what part of the image is matched.
I wanted a stopwatch app specialized to my needs. Here are some features:
really gigantic display (so I can see it from 50 feet up at the gym when rock climbing)
adjustable fractional precision (default 0.1 seconds; if you increase it to 1 second, you save battery)
start/stop with volume buttons
keep screen on option
lock orientation option
full screen option
don't use CPU time when navigated away from (but still keep time)
copy to clipboard (long tap on time)
choice of fonts and colors
relatively small apk (less than 150kb currently)
support for old Android versions (I got it down to 1.6, actually, despite the subject heading)
no ads, no in-app purchases
minimal permissions (runs on boot to detect that the running time was invalidated)
open source
Google play: https://play.google.com/store/apps/details?id=omegacentauri.mobi.simplestopwatch
Download apk from here: https://github.com/arpruss/simplestopwatch/releases
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: I had to render the giant numerals as paths rather than using a font, since my LG V20 refused to render numerals more than about 1400 pixels high.
Now up on Google Play: https://play.google.com/store/apps/details?id=omegacentauri.mobi.simplestopwatch
I added an optional start delay with a 3-2-1 countdown (voice or beeps).
I managed to get the compatibility all the way back to Android 1.6 (not actually tested). And the apk is now even smaller (about 130kb).
I added the Robot Black font for even darker letters.
And a clock (swipe up and down to choose between clock and stopwatch).
I just posted 1.23: the clock and stopwatch can have different colors.
I just posted 1.25. Better compatibility with Android 10+, option to show tenths of second on big display, and options to disable one or both clock modes.
Just posted 1.36. New options include: customizable delay, start/stop with screen tap, FHWA E font. And a bug fix for some crashes.
I posted 1.39. New option: periodic beep. I needed this option for a Guinness world record attempt (successful, though not yet submitted for certification), as the record guidelines required an "audible signal" of the end of the time period.