Hi guys,
I have upgraded the Moto G3 to marshmallow and PC to Windows 10. After this upgradation Moto G3 is not detected in Windows 10. I have checked the device manager and nothing is changing in the device manager. The mobile is getting charged but no MTP connection. I have tried most of the solutions like
1. Enable usb debugging and change usb config to MTP from charging after installing the motorola drivers.
2. Tried installing the motorola device manager and did the same as above but no use.
Plz help
Does your phone have 6.0 or 6.0.1?
Mine has 6.0.1 and I use file transfer mode when connected to my PC. It is detected.
If your phone has 6.0 then upgrade to 6.0.1
tnx for replying. My phone is having 6.0.1 and I have tried changing the usb debugging settings from charging only to media transfer protocol.
Usually when phone is connected it shows the hardware changes in device manager but when I connect my phone its not showing any hardware changes.
Also when I tried connecting the same phone to linux it directly takes my phone as usb drive.
Sorry for late reply. When your phone is connected to Windows, swipe down from notification panel ( status bar ). It would be showing "USB for charging". Tap on it and press "File transfer mode". You're ready to go.
By the way did you face this problem while you had Windows 8/7?(if you upgraded for free) or did the computer come with Windows 10 itself(is it a new computer)?
---------- Post added at 05:22 PM ---------- Previous post was at 05:19 PM ----------
As you said in the question, after marshmallow update this is one change seen. It isn't directly read as USB drive.
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
kishoreuk2008 said:
Hi guys,
I have upgraded the Moto G3 to marshmallow and PC to Windows 10. After this upgradation Moto G3 is not detected in Windows 10. I have checked the device manager and nothing is changing in the device manager. The mobile is getting charged but no MTP connection. I have tried most of the solutions like
1. Enable usb debugging and change usb config to MTP from charging after installing the motorola drivers.
2. Tried installing the motorola device manager and did the same as above but no use.
Plz help
Click to expand...
Click to collapse
This question
my G3 has the same problem, it won't get detected in win10.
i didn't think anyone else would experience the same.
xstormli said:
my G3 has the same problem, it won't get detected in win10.
i didn't think anyone else would experience the same.
Click to expand...
Click to collapse
Now did it get detected? Did you try?
Was it detected when the computer was on win 7/8?
sanchith.hegde said:
Now did it get detected? Did you try?
Was it detected when the computer was on win 7/8?
Click to expand...
Click to collapse
go download WinDroid Toolkit, it will help you through the undetecting thingy. Mine worked after I worked around with it for the whole afternoon.
xstormli said:
go download WinDroid Toolkit, it will help you through the undetecting thingy. Mine worked after I worked around with it for the whole afternoon.
Click to expand...
Click to collapse
What about using without WinDroid Toolkit and trying to change to File Transfer Mode?(as I told above)
sanchith.hegde said:
What about using without WinDroid Toolkit and trying to change to File Transfer Mode?(as I told above)
Click to expand...
Click to collapse
there is gotta be something missing, installing just from MOTO is not enuf. try it first and see how it goes. it is worth a try.
xstormli said:
there is gotta be something missing, installing just from MOTO is not enuf. try it first and see how it goes. it is worth a try.
Click to expand...
Click to collapse
But every time I connect the phone to my PC, I just change to File Transfer Mode and go ahead. It is detected. What happens is when it is in charging mode, phone is detected but internal storage and SD card is not shown. But after changing to file transfer mode both are shown and then I transfer required files.
Moreover nothing has to be even installed.
sanchith.hegde said:
But every time I connect the phone to my PC, I just change to File Transfer Mode and go ahead. It is detected. What happens is when it is in charging mode, phone is detected but internal storage and SD card is not shown. But after changing to file transfer mode both are shown and then I transfer required files.
Moreover nothing has to be even installed.
Click to expand...
Click to collapse
it seems there is no problem in your case, charging and MTP are two different things.
When MTP mode is on, you will have MTP and Charging working together, but
you will not have MTP while only Charging mode is enabled.
xstormli said:
it seems there is no problem in your case, charging and MTP are two different things.
When MTP mode is on, you will have MTP and Charging working together, but
you will not have MTP while only Charging mode is enabled.
Click to expand...
Click to collapse
When I connect to PC, I get this. I change to file transfer mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connection
sanchith.hegde said:
Now did it get detected? Did you try?
Was it detected when the computer was on win 7/8?
Click to expand...
Click to collapse
my moto g3 get detected alot of time in windows 10 but not able to use file transfer in windows 7-8.. only shows charging..
Related
Hello members,
I recently bought a new PC, running on Windows Vista Ultimate. I had to install Microsoft Mobile Device Center for syncronization (instead of Active Sync for Windows XP), so I did.
As far as I know I installed it the way it should be.
So here come's the problem;
I wanted to flash a new rom, so I connected my device to my pc to establish a connection with Microsoft Mobile Device Center,
but the phone isn't even reconized in Vista, therefore I can't flash a new rom on the device.
I tried al my USB ports and did a hard reset on the device, but that didn't work.
The phone is a MDA Vario 4, with MRom 1.63. I never had problems on XP with synchronizing so im pretty sure the Rom is not the problem, but I don't know what is..
How can I fix this so I can flash my device using WMDC in Vista
32 or 64bit vista ?
Rudegar said:
32 or 64bit vista ?
Click to expand...
Click to collapse
I have 32 bit Vista.
It works great with Window Vista Home Premium 64bit. Is your settings familiar with mines?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i think this might help you, im assuming that your phone is recognized as a when you want to sync it but when you want to flash a rom it will not find the phone, if this is the case here you go http://forum.xda-developers.com/showthread.php?t=291723, hope it helps
try unchecking that checkbox for enable quick ....
Depending on whether it is if you want to flash or not...
If it is just to sync, I had this problem too and the solution was to delete the profile in ActiveSync on the phone and then reconnect. (I think - it was a while ago).
As per the first pic in xhypnotik's post, try unchecking the box for "enable faster data sync". If this doesn't work, try deleting the profile on the phone...
I had a similar issue. See if running Windows Update on Vista works. For some reason the driver for Device Center didn't automatically download for me. It was on of the updates under Windows Update though.
Before I start, thx all for your reply's, your help is much appreciated.
xhypnotik said:
It works great with Window Vista Home Premium 64bit. Is your settings familiar with mines?
-IMAGE-
-IMAGE-
-IMAGE-
-IMAGE-
Click to expand...
Click to collapse
I have the same settings, but nothing happens when I connect my Phone to PC.
rmjjjt said:
Depending on whether it is if you want to flash or not...
If it is just to sync, I had this problem too and the solution was to delete the profile in ActiveSync on the phone and then reconnect. (I think - it was a while ago).
As per the first pic in xhypnotik's post, try unchecking the box for "enable faster data sync". If this doesn't work, try deleting the profile on the phone...
Click to expand...
Click to collapse
MimoG3 said:
i think this might help you, im assuming that your phone is recognized as a when you want to sync it but when you want to flash a rom it will not find the phone, if this is the case here you go http://forum.xda-developers.com/showthread.php?t=291723, hope it helps
Click to expand...
Click to collapse
Thx for your reply's, but my phone isnt reconized at all. So I can't do anything at all on my computer, no flasing, no synchronizing, I can't even acces the phone's memory card, even if I select the Disk Drive option.
As soon as I connect my phone to my computer Windows Vista just says,
"The usb device is not recognized".
sto110 said:
try unchecking that checkbox for enable quick ....
Click to expand...
Click to collapse
Tried this to, didn't did anyting to
mattyman said:
I had a similar issue. See if running Windows Update on Vista works. For some reason the driver for Device Center didn't automatically download for me. It was on of the updates under Windows Update though.
Click to expand...
Click to collapse
I did an update just some moments ago, it installed some updates, but it didn't install any update's for the WMDC..
I took the check mark off "Enable Advance Network Functionality"...seemed to recognize my Fuze
smittyj26 said:
I took the check mark off "Enable Advance Network Functionality"...seemed to recognize my Fuze
Click to expand...
Click to collapse
Vista still not reconizing. It just shows the unknown device message when I connect it to USB, so there isn't anything I can do.
I made some screenshots of the message I get when I connect my device;
When I click on the message, I get the following screen;
When I go to my computer, there isn't any device I can click on..
Try plugging in some other devices instead of the phone into your USB port and see if that message appears. You might need to update your drivers or install it.
xhypnotik said:
Try plugging in some other devices instead of the phone into your USB port and see if that message appears. You might need to update your drivers or install it.
Click to expand...
Click to collapse
Did that too. I tried an external HD storage device, an MP3 player, and my printer, which is USB connected. Al devices are working properly, except the phone. When I connect it, and want to install drivers for it, it simply just says, that there aren't any available.
I fixed the problem.
Very weird, I accidently tried another USB cable and that did the trick. It installed all the drivers automatically and now the device is reconized, so problem is solved.
Thanks everyone for your input!
AjiNn said:
Hello members,
I recently bought a new PC, running on Windows Vista Ultimate. I had to install Microsoft Mobile Device Center for syncronization (instead of Active Sync for Windows XP), so I did.
As far as I know I installed it the way it should be.
So here come's the problem;
I wanted to flash a new rom, so I connected my device to my pc to establish a connection with Microsoft Mobile Device Center,
but the phone isn't even reconized in Vista, therefore I can't flash a new rom on the device.
I tried al my USB ports and did a hard reset on the device, but that didn't work.
The phone is a MDA Vario 4, with MRom 1.63. I never had problems on XP with synchronizing so im pretty sure the Rom is not the problem, but I don't know what is..
How can I fix this so I can flash my device using WMDC in Vista
Click to expand...
Click to collapse
Could you please check your outlook? maybee this has the problem. i told you this, because i have same problem, and my problems root beggin from outlook!!!
My phone can only charge but not be recognized on USB, when I plug it into my computer it says it's unrecognizable from my computer (like an error pops up). It wasn't like this before I installed the new update to the cygeonmod rom. I tried going back to stock gingerbread, other roms. Like at least 4 roms i've tried I just don't know what to do now. Any Ideas?
Are you trying to access the storage or use development tools (like adb) via USB?
Also, have you tried with a different USB port (preferably one on the motherboard of your computer)?
WindSlash said:
Are you trying to access the storage or use development tools (like adb) via USB?
Also, have you tried with a different USB port (preferably one on the motherboard of your computer)?
Click to expand...
Click to collapse
I'm just trying to access the storage, I've tried different usb ports but it just keeps saying USB Device Not Recognized.
I'm assuming you're using Windows... can you go under Device Manager and see if there is one with an exclamation mark (!) when your device is plugged in?
WindSlash said:
I'm assuming you're using Windows... can you go under Device Manager and see if there is one with an exclamation mark (!) when your device is plugged in?
Click to expand...
Click to collapse
yes theres and exclamation mark when I plug it in and it says (!) Unknown Device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone got any solutions?
tdog1o1 said:
My phone can only charge but not be recognized on USB, when I plug it into my computer it says it's unrecognizable from my computer (like an error pops up). It wasn't like this before I installed the new update to the cygeonmod rom. I tried going back to stock gingerbread, other roms. Like at least 4 roms i've tried I just don't know what to do now. Any Ideas?
Click to expand...
Click to collapse
Had the same problem and it ended up being a faulty USB cable. Pretty unlikely, but try a different cable and see if that helps.
XK72 said:
Had the same problem and it ended up being a faulty USB cable. Pretty unlikely, but try a different cable and see if that helps.
Click to expand...
Click to collapse
I've tried different usb cables with different computers and with different usb slots in each computer. Nothing works. Is it possible that my nexus s is missing a file allowing me to connect usb to my computer? Because every computer I use it says USB DEVICE NOT RECOGNIZED so I was just wondering if that's the case.
tdog1o1 said:
I've tried different usb cables with different computers and with different usb slots in each computer. Nothing works. Is it possible that my nexus s is missing a file allowing me to connect usb to my computer? Because every computer I use it says USB DEVICE NOT RECOGNIZED so I was just wondering if that's the case.
Click to expand...
Click to collapse
It sounds like your problem can be isolated to the phone, but I'm not familiar with working in a Windows environment. I'd try booting into (the phone's) Recovery and seeing if you can mount the drive from there. Might help you isolate whether or not your issue is related to a particular volume.
XK72 said:
It sounds like your problem can be isolated to the phone, but I'm not familiar with working in a Windows environment. I'd try booting into (the phone's) Recovery and seeing if you can mount the drive from there. Might help you isolate whether or not your issue is related to a particular volume.
Click to expand...
Click to collapse
I tried that going into the phone's recovery mode and plugging in the usb cord and it still says the same thing. When I go into further like clicking the message it gives me a Code 43 warning on my computer. I also tried hard factory resetting my phone when I was on the phone with Samsung and that didn't work either. Everything was fine before I flashed Cygenmod rom on my phone everything was perfect.
tdog1o1 said:
I tried that going into the phone's recovery mode and plugging in the usb cord and it still says the same thing. When I go into further like clicking the message it gives me a Code 43 warning on my computer. I also tried hard factory resetting my phone when I was on the phone with Samsung and that didn't work either. Everything was fine before I flashed Cygenmod rom on my phone everything was perfect.
Click to expand...
Click to collapse
Have you installed the drivers from http://developer.android.com/sdk/win-usb.html?
XK72 said:
Have you installed the drivers from http://developer.android.com/sdk/win-usb.html?
Click to expand...
Click to collapse
I tried it and nothing is working.
Can you go back to Device Manager?
Double click on the "Unknown Device", then click on "Details" tab, under "Property", select "Hardware Ids", and take a screenshot of what's there?
WindSlash said:
Can you go back to Device Manager?
Double click on the "Unknown Device", then click on "Details" tab, under "Property", select "Hardware Ids", and take a screenshot of what's there?
Click to expand...
Click to collapse
Here you go.
Interesting... now let me ask you from another angle, with the phone connected and USB debugging on, are you able to access the phone using adb devices / fastboot?
download and install PDANet
worked like a charm for me, installed my usb drivers to my phone which i had problems with just like you.
WindSlash said:
Interesting... now let me ask you from another angle, with the phone connected and USB debugging on, are you able to access the phone using adb devices / fastboot?
Click to expand...
Click to collapse
No i'm not able to access it with fastboot or adb devices. All it says is USB device not recognized.
Nexus S Woes
I had the exact same story and errors as tdog1o1, and the ONLY fix I found useful was on an mp3 forum.
" I had code 43 problems with my usb ports until I found a thread on MSI's website. My front panel usb ports connected to a 9 pin usb header on the motherboard. Only 8 pins are needed. If pin 9 has a black ground wire then remove it. I didnt give this fix much hope but it fixed my problems! "
After many hours of driver installs, front usb port changes, and a dozen reboots, this actually worked!
I merely used the USB at the back of the computer and Voila!
Looks Wind Slash nailed it at the beginning of this thread.
Nexus S
I am having the exact problem, have found a solution.
Hi,
Three days ago, my Nexus 5 has stoped from being recognized by my computer as a device: when I plug my phone, nothing happens:
No "USB" icon/notification on my phone
No response from my PC
Enabling/disabling MTP, PTP, Debugging does not change anything
Even my
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is not recognized anymore
I am an experienced user an it is not a driver's problem (I have already reinstalled drivers and changed USB cables). If it helps, I am on stock 4.4.4 rooted.
I don't know if anyone has ever had the same problem and can give a hint! Thanks a lot!
willylatorre said:
Hi,
Three days ago, my Nexus 5 has stoped from being recognized by my computer as a device: when I plug my phone, nothing happens:
No "USB" icon/notification on my phone
No response from my PC
Enabling/disabling MTP, PTP, Debugging does not change anything
Even my
is not recognized anymore
I am an experienced user an it is not a driver's problem (I have already reinstalled drivers and changed USB cables). If it helps, I am on stock 4.4.4 rooted.
I don't know if anyone has ever had the same problem and can give a hint! Thanks a lot!
Click to expand...
Click to collapse
Try to switch USB port in PC, reinstall your android (complete wipe of system, then reinstall it). Or maybe your windows is causing this problem.
Cable or port issue. USB port on phone, computer or cable.
Sent from my Nexus 5 using Tapatalk
Thanks, but I have already tried on multiple PCs,multiple ports and multiple cables. I don't know if it can be a sofware problem that a wipe or change of ROM can solve :/
willylatorre said:
Thanks, but I have already tried on multiple PCs,multiple ports and multiple cables. I don't know if it can be a sofware problem that a wipe or change of ROM can solve :/
Click to expand...
Click to collapse
Then perhaps USB fault on your phone.
Can't flash factory without USB
Sent from my Nexus 5 using Tapatalk
willylatorre said:
Hi,
Three days ago, my Nexus 5 has stoped from being recognized by my computer as a device: when I plug my phone, nothing happens:
No "USB" icon/notification on my phone
No response from my PC
Enabling/disabling MTP, PTP, Debugging does not change anything
Even my
is not recognized anymore
I am an experienced user an it is not a driver's problem (I have already reinstalled drivers and changed USB cables). If it helps, I am on stock 4.4.4 rooted.
I don't know if anyone has ever had the same problem and can give a hint! Thanks a lot!
Click to expand...
Click to collapse
I experienced the same issue yesterday when I tried to flash Lollipop on my Nexus5.
Using the original USB cable that came with the Nexus did the trick.
Try turning USB Debugging on Dev Options. It might help.
willylatorre said:
Hi,
Three days ago, my Nexus 5 has stoped from being recognized by my computer as a device: when I plug my phone, nothing happens:
No "USB" icon/notification on my phone
No response from my PC
Enabling/disabling MTP, PTP, Debugging does not change anything
Even my
is not recognized anymore
I am an experienced user an it is not a driver's problem (I have already reinstalled drivers and changed USB cables). If it helps, I am on stock 4.4.4 rooted.
I don't know if anyone has ever had the same problem and can give a hint! Thanks a lot!
Click to expand...
Click to collapse
you're using windows?
ither one of these two will help -
PC recognizes Nexus but then I can't access my storage
but I believe this is the one you want -
Nexus 5 connecting via USB as wrong device
I have had the phone for just under two weeks and all seemed to be running fine until I plugged the device into the PC recently, I changed the connection mode from charging to MTP but nothing happened, I followed the instructions in this thread but still no success. I've attached a screenshot showing the discrepancy in the setting and notification bar.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The notification bar shows charging only whilst in the settings it shows MTP, though the PC does not detect it. Anyone else experienced anything similar?
ShinOrochiX said:
I have had the phone for just under two weeks and all seemed to be running fine until I plugged the device into the PC recently, I changed the connection mode from charging to MTP but nothing happened, I followed the instructions in this thread but still no success. I've attached a screenshot showing the discrepancy in the setting and notification bar.
The notification bar shows charging only whilst in the settings it shows MTP, though the PC does not detect it. Anyone else experienced anything similar?
Click to expand...
Click to collapse
You have to tap the notification (it will open a popup) and change to MTP each time you connect to the computer.
rrvuhpg said:
You have to tap the notification (it will open a popup) and change to MTP each time you connect to the computer.
Click to expand...
Click to collapse
Yeah I know that, but when I tap MTP nothing happens. I've never had a problem with other phones running MM.
ShinOrochiX said:
Yeah I know that, but when I tap MTP nothing happens. I've never had a problem with other phones running MM.
Click to expand...
Click to collapse
You have this problem since first day? You tried on an other computer?
rrvuhpg said:
You have this problem since first day? You tried on an other computer?
Click to expand...
Click to collapse
On the first day when I connected the phone to my PC everything was fine, I installed Xperia Companion and was able to access the internal storage/memory card. I tried on another PC and again all seemed fine. It is just on my main PC, there is a driver error (according to Windows device manager). Updating fails, uninstalling and plugging the device back in also doesn't work.
I think I have found the cause, https://answers.microsoft.com/en-us...soft-wpd/9f900903-50d8-4935-939d-5dbf8d6bd1d0
Now I need to figure out a way to remove the faulty driver!
Did you enanle usb debugging?
Setting›developer options›usb debugging
Siam4k said:
Did you enanle usb debugging?
Setting›developer options›usb debugging
Click to expand...
Click to collapse
You don't need to enable debugging to use MTP
Problem solved!
Problem solved, it is caused by the new driver update (Microsoft – WPD – 2/22/2016 12:00:00 AM – 5.2.5326.4762), it seems to have issue with some devices-specifically Mediatek powered ones. The solution is simple, uninstall the driver update via Windows, if that isn't possible then use system restore, if even that fails (like in my case) then the driver can be manually removed using command prompt, as explained here. Now the device connects fine, just like it used to.
As far as I am aware the update has now been pulled so shouldn't install. I triggered the installation of the update myself after manually checking for updates-that's the last time I'll be doing that. :silly:
Fix
Apparently there's a very simple solution. Same thing happened with me a few days ago, search for " How to Fix MTP! problem in windows 10 " on Youtube uploaded by " Infinity Studio " watch this it solved my problem. (Sorry can't post link as m still a junior member)
I have recently found my old Nikon S800c, unfortunately i have forgotten the password i have set years ago. The camera has no volume buttons and seemingly no way to get to a bootloader to factory reset it. I've searched through the internet and i cannot find any way to reset/recover my device.
basically lost password of old Nikon s800c with no volume button, usb debugging off and runs android 2.3.3
VeryNoobyGuy said:
I have recently found my old Nikon S800c, unfortunately i have forgotten the password i have set years ago. The camera has no volume buttons and seemingly no way to get to a bootloader to factory reset it. I've searched through the internet and i cannot find any way to reset/recover my device.
basically lost password of old Nikon s800c with no volume button, usb debugging off and runs android 2.3.3
Click to expand...
Click to collapse
If there is a way to flash its firmware, flashing the firmware might remove the password.
I just did, it didn't change anything about the android side of things
When you boot up, you are basically using it as a normal digital camera, then you can enter the android side of the device, which i forgot my password of
Here is a more recent video i found which went over how it worked
Sometimes a Google search is better than a forum: https://www.imobie.com/android-system-recovery/how-to-reset-android-phone-using-pc.htm
Arealhooman said:
Sometimes a Google search is better than a forum: https://www.imobie.com/android-system-recovery/how-to-reset-android-phone-using-pc.htm
Click to expand...
Click to collapse
1. There's no way to enter recovery mode as it doesn't have a volume button
2. It doesn't have a wifi connection and can't connect to one without putting in the password
3. The droidkit thing wont work as it needs the device brand
4. Usb debugging isn't on so i can't use Android sdk tools
VeryNoobyGuy said:
1. There's no way to enter recovery mode as it doesn't have a volume button
2. It doesn't have a wifi connection and can't connect to one without putting in the password
3. The droidkit thing wont work as it needs the device brand
4. Usb debugging isn't on so i can't use Android sdk tools
Click to expand...
Click to collapse
How about Universal Hard Reset Tool? Edit: I think that needs usb debugging too….
It wouldn't work either way as it doesn't detect as an phone on my pc, only as a storage device
VeryNoobyGuy said:
It wouldn't work either way as it doesn't detect as an phone on my pc, only as a storage device
Click to expand...
Click to collapse
Do you have drivers?
Arealhooman said:
Do you have drivers?
Click to expand...
Click to collapse
What kind? Nikon doesn't have one for the s800c, is there any drivers for Android im not aware of?
Download Android USB Drivers for popular OEMs
Not sure which driver to install for your Android device? We can help. In this guide, we'll explain how to install the correct USB driver.
www.xda-developers.com
scroll down to: “Manually install the driver for an unsupported device”
Sorry for the caps, they won’t go away
Arealhooman said:
Download Android USB Drivers for popular OEMs
Not sure which driver to install for your Android device? We can help. In this guide, we'll explain how to install the correct USB driver.
www.xda-developers.com
scroll down to: “Manually install the driver for an unsupported device”
Sorry for the caps, they won’t go away
Click to expand...
Click to collapse
im trying to get it to work, still only shows up as "usb mass storage device"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VeryNoobyGuy said:
im trying to get it to work, still only shows up as "usb mass storage device"View attachment 5757535View attachment 5757539
Click to expand...
Click to collapse
ill just continue doing it tmr, my problem was that i cant find a useable driver to force onto it
VeryNoobyGuy said:
im trying to get it to work, still only shows up as "usb mass storage device"View attachment 5757535View attachment 5757539
Click to expand...
Click to collapse
What if you click on driver on there
Digital Camera Drivers - Windows
www.nikonimgsupport.com
If that doesn’t work try this https://www.driverguide.com/driver/company/Nikon/Camera/index.html